burp (1.4.12-1) experimental; urgency=low * New upstream release 1.4.12 (not stable). * Changes in burp-1.4.12: - Make 'make test' skip tests if no source of randomness seems to exist for openssl to use. - Fix restoring of correct file times on Windows clients. - Fix false failure notification - differentiate between not getting a lock and getting an error when trying to get a lock. - Turn off excessive logging on some restores. - Rename configure.in to configure.ac to avoid Debian build warnings. - Make test script check for lock file instead of working/finishing symlinks when checking whether an operation has finished yet. Removed debian/patches/wait_for_backup.patch. - Fix encryption casting problem on 64 bit big endian platforms (e.g. s390x, ppc64, sparc64). * Remove debian/patches/endian.patch, applied upstream. * Remove debian/patches/showlogs.patch, applied upstream. * Remove debian/patches/disabletest5and6.patch, applied upstream. * Remove debian/patches/series because it is no longer contains any patches. * Remove empty directory debian/patches. -- Bastiaan Franciscus van den Dikkenberg Sun, 13 Apr 2014 18:14:32 +0200 burp (1.4.10-2) experimental; urgency=medium * Add missing "exit 0" statement in debian/init. (Closes: #742218) -- Bastiaan Franciscus van den Dikkenberg Sun, 06 Apr 2014 12:24:24 +0200 burp (1.4.10-1) experimental; urgency=low * New upstream release 1.4.10 (not stable). * Changes in burp-1.4.10: - Bug fix for false failure notification when a client tries to connect again while a backup is still in progress. * Changes in burp-1.4.8: - Be sure to close directory file descriptor if fdopendir() fails. - Extend the JSON list functionality so that covers all types of listing. - Allow the backup to carry on if a filename was too long for the server. - Regenerate server certificates if the CA directory exists and is empty. - Add machine-readable statistics files for restores and verifies in the backup directories. - Bug fix for server not exiting after one connection with '-n'. - Add 'manual_delete=' option. This makes the server move directories to be deleted to the specified directory, with the intention that they will be deleted manually (perhaps by a cron job) later. * Changes in burp-1.4.6: - Add client option '-a T', which checks whether it is yet time for a backup without actually doing a backup. - Make the server request the whole file when ctime changes on Windows, otherwise changes to metadata when the file content is unchanged will not be noticed. - Add 'delete' to the client help output. - Bug fix for the include_glob code being run on the server side. - Bug fix for in the include_glob code not initialising the glob_t struct correctly. - Get 'include_glob=' in the clientconfdir server side file to work without also needing an 'include='. - When backing up, open files and directories with O_NOATIME flag so that the access time is not changed. - Bug fix for no failure notification being sent when the backup directory cannot be created. * Changes in burp-1.4.4: - Bug fix for include_glob xmalloc success check on Windows. - Fix long list and status monitor output when a directory argument is given. - Fix restore problem with backups containing both compressed and uncompressed files. - Bug fix for an interrupted backup causing a resume when a restore_client connects. - Bug fix for defaulting 'resume partial' to off. * Changes in burp-1.4.2 - Add a machine-readable statistics file to each backup directory. * Changes in burp-1.4.0 - Add Abbas Khan's RHEL spec files and related things. - Add Benjamin Sans's include_glob feature. -- Bastiaan Franciscus van den Dikkenberg Wed, 05 Mar 2014 13:29:04 +0100 burp (1.3.48-4) unstable; urgency=high * Include "autotools-dev" addon for dh in debian/rules to allow config.{sub,guess} to be regenerated. (Closes: #743873) -- Bastiaan Franciscus van den Dikkenberg Mon, 07 Apr 2014 19:39:01 +0200 burp (1.3.48-3) unstable; urgency=medium * Add missing "exit 0" statement in debian/init. (Closes: #742218) -- Bastiaan Franciscus van den Dikkenberg Sat, 05 Apr 2014 11:01:59 +0200 burp (1.3.48-2) unstable; urgency=low * Add patch to fix pointer casting in src/msg.c:transfer_gzfile_in to fix FTBFS on 64-bit big-endian architectures (Closes: #740505): - debian/patches/endian.patch * Replace debian/patches/disable_tests.patch with debian/patches/fixskiptest, so that only test 6 and 7 are skipped when there is no PRNG available. * Add patch for the test function wait_for_backup_to_finish to check for the existance of /var/spool/burp/testclient/lockfile instead of the symlinks /var/spool/burp/testclient/{working,finishing} (Closes: #740547): - debian/patches/wait_for_backup_to_finish.patch * Now using autoreconf for better portability: - Change dh $@ to dh $@ --with autoreconf in debian/rules file. - Add dependency on dh-autoreconf in debian/control. * Change dh_verbose to 1 to solve compiler-flags-hidden warnings in debian/rules file. * Remove obsolete overrides in rules file: - override_dh_auto_install - override_dh_install - override_dh_installdocs * Using dh_auto_configure instead of just running ./configure with the following options in debian/rules: - prefix /usr - sysconfdir /etc/burp - sbindir $${prefix}/sbin - mandir $${prefix}/share/man - C/CPP/LD flags uses exported build flags * Add debian/burp.install and debian/burp.dirs. -- Bastiaan Franciscus van den Dikkenberg Mon, 03 Mar 2014 15:54:28 +0100 burp (1.3.48-1) unstable; urgency=low * New upstream release. - Fix long delay in init script when the stop function is invoked. (Closes: #687523) - Add missing compiler and linker flags on armel, armhf, i386, kfreebsd-amd64, powerpc and s390 architectures. (Closes: #675368) - Fix bedup crashing with exit status 139. (Closes: #715678) - Fix restoring of correct file times on Windows clients. * Bump Standards-Version to 3.9.5.0: - Add dependency on initscripts (>= 2.88dsf-13.3). * Add Vcs-Browser field to debian/control. * Bump dephelper version to 9: - Fixes lintian reports about missing hardening of binaries ("hardening-no-relro"). (Closes: #735128) * Update address of FSF in debian/copyright. (Closes: #735129) * Change copyright for files in debian/ from GPL-2 to AGPL-3. * Add upstream patch to disable compile-time test when no PRNG is available: (Closes: #675761) - debian/patches/disable_tests.patch * Add patch to display a list of available log files when one or more compile-time tests have failed: - debian/patches/showlogs.patch * Adjust debian/watch file to track stable 1.3.x releases only, the experimental 1.4.x releases are ignored. * Changes in burp 1.3.46: - Another bug fix for false failure notification - differentiate between not getting a lock and getting an error when trying to get a lock. - Turn off excessive logging on some restores. * Changes in burp 1.3.44: - Fix false failure notification when a client tries to connect again while a backup is still in progress. * Changes in burp 1.3.42: - In backup phase 4, a 'deleteme' directory may already exist if the server was previously interrupted whilst deleting it. If so, delete it before attempting to rename anything to it. * Changes in burp 1.3.40: - Make the server request the whole file when ctime changes on Windows, otherwise changes to metadata will not be registered when the file contents are unchanged. - Add 'delete' to the client help output. - When backing up, open files and directories with O_NOATIME flag so that the access time is not changed. - Fix missing failure notification when the backup directory cannot be created. * Changes in burp 1.3.38: - Fix long list and status monitor output when a directory argument is given. - Fix restore problem with backups containing both compressed and uncompressed files. - Fix interrupted backups triggering a resume when a restore_client connects. - Fix defaulting 'resume partial' to off. * Changes in burp 1.3.36: - Fix truncation of timestamps in the live status monitor. - Default the 'resume partial' feature to being off, and add an option to turn it on. * Changes in burp 1.3.34: - Contributions from Avi Rozen: + Major autoconf cleanup. + Initial support for cross-building Android targets. - On the server, indicate where logging is occurring. - Fix bedup segfaulting when using -m with no argument. * Changes in burp 1.3.32: - Fix status monitor segfault. - Run timed backups with lower thread priority on Windows. - Add 'vss_drives' option, which gives the ability to specify which Windows drives get a VSS snapshot. * Changes in burp 1.3.30: - Add a warning when run on Windows without admin privileges. - Perform fewer lstat()s on systems that support d_type (i.e. most Linux systems) in order to speed up certain operations. - Allow _FORTIFY_SOURCE to work. - Fix problem with burp_ca.bat and repeated field names in burp.conf. - Put registry keys back into the Windows installer. - Fix for SIGHUP reload causing the server to go into non-forking mode. - Mark backups which can be deleted. - Add a client option for deleting backups which can be deleted. - Add a 'client_can_delete' option on the server. - Fix for using the wrong lock directory when 'directory' is overridden for a client. * Changes in burp 1.3.28: - Add the ability to resume partially transferred files. - Make sure 'timer conditions not met' message appears on the client. - Fix turning off compression before resuming a backup. * Changes in burp 1.3.26: - When a read_blockdev option matches a symlink, backup the destination as a raw block device. - Avi Rozen's valgrind cleanup. Includes a fix for a bug in restore_client.c where overwrite_ok checked the wrong stat struct when considering a FIFO. - Add '-v' option to bedup (output the names of duplicate files). - Add '-d' option to bedup (delete duplicates instead of hardlinking - not for use on burp storage directories). * Changes in burp 1.3.24: - Fix strip_vss/split_vss truncating backups of changed files on Windows. - Fix auto upgrade failing on Windows if autoupgrade_dir has been modified. - Fix listing backups created with split_vss=1. - Fix restoring uncompressed encrypted backups created with split_vss=1. - Fix making backups with min_file_size and split_vss=1. - Fix Debian init do_stop() function (Thanks Peter Maloney). - Fix resuming backups where a file to patch has already been hard-linked into place. Also get the client to report a more helpful message if any similar problem occurs. - Fix signal handler race conditions. - Fix forkchild child not exiting when execv fails. - Change run_script() code to take an array. - Add server_script_pre_notify and server_script_post_notify options. - Rework the test script so that it can test Windows clients as well. - Let a Windows signal handler try to shut VSS down nicely on certain signals such as Ctrl-C. - Include an example server-side off-site rsync backup script. This is not quite working properly yet but it may still be useful. - Fix Windows preventing from going to sleep during a backup. (Thanks Avi Rozen). - Fix "unable to set datapath: (null)" backup resuming issue. (Closes: #695641) - Fix spelling error 'overriddden' in the burp(8) manpage. (Closes: #685568) - Fix error in client_can_list section in the burp(8) manpage. (Closes: #694506) * Changes in burp 1.3.22: - Contributions from Avi Rozen: + Add a '-j' option to format the long file-list as JSON. Intended for use with burpfs (https://github.com/ZungBang/burpfs). + Fix list/verify/restore when regex is long and/or contains a colon. + Fix split_vss backups being restored on a linux restore_client with the -f (force) option. Prevents overwriting of the destination file with the vss footer. - Contributions for burp_ca from Patrick Koppen: + Fix the size option. + Use shell numeric comparison instead of string comparison. + Added subjectAltName patch (in case it is needed outside of burp). * Changes in burp 1.3.18: - Fix "split/strip_vss = 1" on the client side always resulting in all files being backed up. - Make configure default to /usr as prefix. -- Bastiaan Franciscus van den Dikkenberg Tue, 31 Dec 2013 16:42:30 +0100 burp (1.3.8-1) unstable; urgency=low * New upstream release. -- Bastiaan Franciscus van den Dikkenberg Fri, 08 Jun 2012 10:49:18 +0200 burp (1.3.6-1) unstable; urgency=low * New upstream release. * Drop obsolete lintian overrides: - non-standard-file-perm etc/burp/ssl_cert-client.pem 0600 != 0644 - non-standard-file-perm etc/burp/ssl_cert-server.pem 0600 != 0644 * Update debian/copyright to copyright format 1.0. -- Bastiaan Franciscus van den Dikkenberg Tue, 29 May 2012 13:29:44 +0200 burp (1.3.4-2) unstable; urgency=low * Bump debhelper version to 8. -- Bastiaan Franciscus van den Dikkenberg Fri, 04 May 2012 11:57:30 +0200 burp (1.3.4-1) unstable; urgency=low * New upstream release. - Fix make error during build process. - Fix syntax of compression directive. (Closes: #665843) - Allow alternative configuration file paths for burp-ca. (Closes: #669107) - Tidy up "Raw partition". (Closes: #670598) - Prevent client from browsing backups. (Closes: #670599) - Prevent client from running a restore. (Closes: #670600) - Fix "Document or implement ability to prevent *client* from initiating manual backup". (Closes: #670601) -- Bastiaan Franciscus van den Dikkenberg Sat, 28 Apr 2012 09:22:05 +0200 burp (1.3.1-1) unstable; urgency=low * New upstream release. - Respect noopt in DEB_BUILD_OPTIONS. (Closes: #661281) - Make the server tell the client what extra_comms features it supports, so that, in future, old servers are more likely to work with new clients. - Improve 'make clean'. - Add option to strip off leading-path components on restore. - Fix a segfault that was happening on the server when SSL_accept() failed. - Move burp and bedup to /usr/sbin. - Move TODO list to https://github.com/grke/burp/issues. * Bump Standards-Version to 3.9.3. (Closes: #661001) * Add debug package. (Closes: #661267) * Fix typo in logrotate script. (Closes: #660964) -- Bastiaan Franciscus van den Dikkenberg Mon, 27 Feb 2012 15:34:17 +0100 burp (1.3.0+20120214git-1) unstable; urgency=low * New upstream snapshot. - Add 'exclude_fs =' option for Linux so that you can skip partitions types (for example, tmpfs) without generating warnings. - If recovery method 'resume' is set, but the includes/excludes change, switch to 'use', then start a new backup. - In the tests, check to see whether it looks like the server has finished the backup before moving on, rather than just waiting for a set amount of time. (Closes: #659462) - Remove embedded uthash code. It's now pulled in through a build dependency on uthash-dev. (Closes: #659454) * Drop patches that have been merged upstream: - debian/patches/add-missing-manpages - debian/patches/adjust-sleep-intest-mode - debian/patches/mailtolog - debian/patches/varrunowndir * Drop redundant init script debian/init.d. * Rename init script debian/init.DEBIAN to debian/init. * Add debian/patches/Backup-phase2-compilation-problem to fix FTBFS on the buildds. (Closes: #659692) * Add debian/patches/Updated-man-pages to clean up manpages. -- Bastiaan Franciscus van den Dikkenberg Tue, 14 Feb 2012 15:47:01 +0100 burp (1.3.0-3) unstable; urgency=low * Add missing debian/patches/mailtolog to debian/patches/series. * Remove Debian changelog entries from all Debian patches. * Add Forwarded: and Last-Update: headers to debian/patches where these are missing: - debian/patches/add-missing-manpages - debian/patches/adjust-sleep-intest-mode - debian/patches/varrunowndir * Raise sleep time after compiliation tests in debian/patches/adjust-sleep-intest-mode from 30 to 50. -- Bastiaan Franciscus van den Dikkenberg Sun, 12 Feb 2012 14:50:29 +0100 burp (1.3.0-2) unstable; urgency=low * Add Forwarded: and Last-Update: headers. * Remove changelog entries from patches. * Remove redundant file debian/README. (Closes: #659453) * Remove blank MAILTO header in cronjob and redirect output to /var/log/burp-client. (Closes: #659452) * Add extra logrotate for /var/log/burp-client. * Change /var/run to /run. (Closes: #659464) * Thanks to Justin B Rye from the debian-l10n-english team for helping with the linguistic support. -- Bastiaan Franciscus van den Dikkenberg Sat, 11 Feb 2012 23:48:03 +0100 burp (1.3.0-1) unstable; urgency=low * Initial release. (Closes: #658152) * Import Debian packaging from upstream with the following changes: - Fix file permissions in debian/rules for the burp configuration files and spool directory (600 and 700 respectively). - Remove empty TODO and README. - Fix a typo in the control file. - Add override_dh_auto_configure in debian/rules to enforce that the configure script is called without any arguments. The configure script sets the proper install prefix for the Debian build automatically. - Add a watch file. - Add patch to move location of PID file. - Fix lintian errors. - Correct the debian/copyright file - Switch source format to 3.0 (quilt). - Add lintian override for non-standard-file-perm. and non-standard-dir-perm. - Add man pages for bedup and burp_ca. -- Bastiaan Franciscus van den Dikkenberg Fri, 10 Feb 2012 17:14:13 +0100