freedombox-setup (0.4) experimental; urgency=low [ Nick Daly ] * Uploading new release. * Made lintian clean(er). [ James Valleroy ] * Stop ejabberd service before removing it's cert file during first-run. * Configure macchanger so it doesn't run automatically when the interface is brought up. We will run it manually if an interface has a null MAC during first-run. * Update dnsmasq upstream to eth0, since that is the upstream interface now. * Update jwchat test to check /jwchat URL. * Setup uap0 interface on dreamplug, using hostapd to configure wifi AP. * Enable dhcp on wlan network. * Create uap0 interface before starting tor. * Bring up uap0 during first-run. This allows interface-detect to see it. * Set HOME in first-run initscript so etckeeper can find the git config. * Beaglebone: Don't need to copy u-boot files to boot partition. freedom-maker will install it in front of boot partition. * Don't skip flash-kernel on beaglebone (reverts previous change). It doesn't cause issues now since we are using ext2 for boot parition. [ peacekeeper ] * Add initial support for cubietruck. * Add rtc_sunxi as boot module. [ Sunil Mohan Adapa ] * Remove pagekite recommendation as Plinth now takes care of its installation and setup (Closes: #778310). * Don't indiscriminately allow all proxy targets in jwchat configuration. * Redirect to Plinth from home page instead of showing jwchat (Closes: #772919). [ James Valleroy ] * Replace cdn.debian.net with http.debian.net in LXC template (Closes: #774479). -- Nick Daly Sun, 14 Jun 2015 20:35:03 -0500 freedombox-setup (0.3) unstable; urgency=low [ Petter Reinholdtsen ] * Adjust debian/tests/test-chroot to build using unstable instead of testing. We are focusing on unstable for now. * Update Standards-Version from 3.9.5 to 3.9.6. [ James Valleroy ] * Remove changes to old ejabberd config file. New ejabberd package uses yml config. * Enable scramblesuit plugin for obfsproxy in tor. Enable ExtORPort for local communication between tor and obfsproxy. * Fix typo in Dreamplug wifi setup script. * Add netcat dependency for tor-get-orport. * Fixes to Tor configuration: - Move DNSPort to 9053 so it does not interfere with dnsmasq. - For configured interfaces, only add SocksPort to interfaces with static IPs. * Fix beaglebone setup to handle btrfs. [ Sunil Mohan Adapa ] * Cleanup Plinth's Apache configuration. Default SSL site is no longer hijacked. Plinth supplied configuration is good enough don't interfere (Closes: #769878). -- Petter Reinholdtsen Sat, 06 Dec 2014 10:56:59 +0100 freedombox-setup (0.2) unstable; urgency=low * Updated documentation from the wiki. * Adjust test suite to use localhost as hostname if no /etc/hostname exist in the test environment. * Change Vcs-Browser field to the cgit interface. -- Petter Reinholdtsen Fri, 29 Aug 2014 23:20:48 +0200 freedombox-setup (0.1) unstable; urgency=high [ James Valleroy ] * Fix typos in first-run.d and setup.d scripts. Remove unused function. [ Petter Reinholdtsen ] * Correct DEBIAN_FRONTEND setting in testsuite to only use lower case letters in value. * Only insert /home/fbx/README in setup.d/45_user-doc if /home/fbx exist. * Make sure /etc/hostname exist in testsuite chroot. * Disable shell tracing in testsuite script now that it is working. -- Petter Reinholdtsen Mon, 25 Aug 2014 08:15:52 +0200 freedombox-setup (0.0.49) unstable; urgency=medium [ James Valleroy ] * Fix wrong quote character in setup.d/99_provide-source (Closes: #756529). * Clean up beaglebone related code. * Adjust Tor setup to enable it as a transparent proxy. [ Petter Reinholdtsen ] * Change test-chroot to use SOURCE=false to avoid trying to download the source packages when testing. * Adjust test-chroot to use DEBIAN_FRONTEND=Noninteractive, as no tty is available when testing. -- Petter Reinholdtsen Sun, 03 Aug 2014 11:46:38 +0200 freedombox-setup (0.0.48) unstable; urgency=medium * Depend on libpam-tmpdir to separate user temporary files by default. * Depend on libpam-abl to make brute force login attacks harder by default. * Update documentation from wiki. * Explain in setup.d/99_provide-source that source is added when it is done. * Add autopkgtest check running the setup script. * Move monkeysphere from depends to suggests while we wait for a solution for bug #635711. -- Petter Reinholdtsen Mon, 28 Jul 2014 20:42:05 +0200 freedombox-setup (0.0.47) unstable; urgency=low [ Nick Daly ] * Tee rpi-update output to the build log. * Rename NOSOURCE variable to SOURCE. * Remove IPv6 configuration from networking auto-config, as network setup seem to choke on it. -- Petter Reinholdtsen Sat, 14 Jun 2014 08:08:34 +0200 freedombox-setup (0.0.46) unstable; urgency=medium [ James Valleroy ] * Add support for Beaglebone using the linux-image-armmp kernel in Debian. * Adjust serial port setup to handle both Dreamplug and Beaglebone. -- Petter Reinholdtsen Fri, 16 May 2014 22:24:50 +0200 freedombox-setup (0.0.45) unstable; urgency=low [ Petter Reinholdtsen ] * Depend on firewalld to block all access by default, and require active involvement to open a port. This require an updated plinth package. * Depend on how-can-i-help to let every user of apt know about problems with 'our' packages. [ James Valleroy ] * Add IPv6 support to network interfaces, privoxy, ejabberd. * Add apache conf for jwchat, separate from fbx site conf. * Add initial support for the Beagle Bone. * Skip backup in rpi-update to avoid error caused by recent change in rpi-update triggering error when no kernel is installed when rpi-update is executed the first time. [ Sunil Mohan Adapa ] * Remove freedombox-client-proxy script, as all the iptables rules are now handled by the plinth package. Depend on plinth (>= 0.3.2.0.git.20140504-1) to get a version with these rules. [ Petter Reinholdtsen ] * Disable downloading of non-Debian packages for the Beagle Bone. We want to use Debian packages for this. * Remove now obsolete init.d scripts /etc/init.d/proxy and /etc/init.d/freedombox-client-proxy on upgrades. * Add curl as binary dependency, as rpi-update switched from wget to curl a month ago. in commit dd495b8dd7f36dc411f2ed2bbdc21e4062b01a62. -- Petter Reinholdtsen Sun, 04 May 2014 09:59:58 +0200 freedombox-setup (0.0.44) unstable; urgency=low * Update Standards-Version from 3.9.4 to 3.9.5. No changes needed. * Add dependency on unattended-upgrades to make it easier to handle upgrades. * Rename init.d scripts first-run to freedombox-first-run and proxy to freedombox-client-proxy, to make it easier to see in /etc/init.d/ which scripts belong to the freedombox setup. * Adjust freedombox-first-run boot dependencies to run after firewalld, tor, haveged, lxc and pagekite, in case those are needed to set up the system. * Rename interface_detect to interface-detect, for more consistent naming with the other sbin tools in this package. * Rename setup.d/10_dreamplug to setup.d/10_hardware to better reflect its current task. * Drop checkinstall from dependencies. It is not used, as far as I can tell. * Drop lua-sec, python-augeas, python-beautifulsoup, python-bjsonrpc, python-docutils and python-lxml from dependencies. None of them are used, as far as I can tell, and they are libraries that should be pulled in by packages that need them. * Drop python-argparse from dependencies, it is now a virtal package provided by libpython2.7-stdlib. * Add dblatex, w3m and zip as build dependencies for the new documentation setup to get the package building automatically (Closes: #745539). -- Petter Reinholdtsen Tue, 22 Apr 2014 20:56:00 +0200 freedombox-setup (0.0.43) unstable; urgency=low * Add Sunil Mohan Adapa as uploader. * Correct copyright info for lxc-templates/lxc-debian-freedombox, it is LGPL 2.1+, not GPL2+. -- Petter Reinholdtsen Tue, 15 Apr 2014 14:21:48 +0200 freedombox-setup (0.0.42) unstable; urgency=low [ Petter Reinholdtsen ] * Drop the README.fbx-home file, and generate it from via Docbook. Store the docbook version of the manual in the source tarball. * Build-depend on libxml2-utils, xmlto and libwww-perl to build the documentation. [ James Valleroy ] * In initial apache setup, disable plinth.conf if plinth-ssl.conf is enabled. -- Petter Reinholdtsen Fri, 28 Mar 2014 16:55:02 +0100 freedombox-setup (0.0.41) unstable; urgency=low [ James Valleroy ] * Change Tor config based on feedback from the Tor community. * Correct ethernet ports in proxy init script. eth0 is external and eth1 is internal. * Make privoxy listen on all interfaces. * Add IPv6 tests. * Make Tor control socket tests a little more robust. * Rewrite Tor obfsproxy test to avoid relying on log file. [ Petter Reinholdtsen ] * Add draft rules in doc/ to generate the documentation from the wiki using docbook transformations. * Recommend the pagekite package currently in NEW. -- Petter Reinholdtsen Thu, 27 Mar 2014 08:35:38 +0100 freedombox-setup (0.0.40) unstable; urgency=low [ James Valleroy ] * For wifi AP setup, source machine-detect and check if $MACHINE is dreamplug. [ Petter Reinholdtsen ] * Add Avahi service definitions for domain(53), ssh(22), sftp-ssh(22) and xmpp-server(5269) to announce the services we provide. -- Petter Reinholdtsen Sat, 22 Mar 2014 14:20:41 +0100 freedombox-setup (0.0.39) unstable; urgency=low * Adjust tor testsuite message to be more clear. * Depend on plinth (>= 0.3.1.git.20140304-1), the version now in jessie. * Document copyright for lxc-templates/lxc-debian-freedombox. * Add missing build dependency on python-support and python | python-all | python-dev | python-all-dev as well as raise debhelper compat version from 8 to 9 to use the python rules automatically. -- Petter Reinholdtsen Thu, 20 Mar 2014 23:14:56 +0100 freedombox-setup (0.0.38) unstable; urgency=low * Added ntp testsuite check. * Correct project git repository URL used in the README. * Depend on avahi-daemon to announce available services on the local net and provide mdns hostname info. Depend on avahi-utils to include tools to use avahi. Depend on libnss-mdns to enable mdns. * Depend on libnss-gw-name to make sure gateway.localhost always map to the current default gateway. * Remove iproute dependency. It is a isc-dhcp-client dependency and we do not need a direct dependency. * Remove python-cheetah and python-cherrypy3 dependencies. They are a plinth dependency and we do not need a direct dependencies. -- Petter Reinholdtsen Thu, 20 Mar 2014 09:10:14 +0100 freedombox-setup (0.0.37) unstable; urgency=low [ James Valleroy ] * Added new jwchat testsuite check. * Use correct hostname for ejabberd and jwchat, when running setup.d scripts inside a chroot. [ Petter Reinholdtsen ] * Removed git and mercurial as dependencies. They are no longer used in setup.d/ as no source repositories are downloaded any more. * Also removed make and build-essential, as building source is no longer needed to get services working. * Removed libpython2.7 as dependency. As far as 'aptitude why' can see, depending on python-augeas is enough to pull it in. * Removed python-simplejson as dependency. As far as 'aptitude why' can see, depending on plinth is enough to pull it in. -- Petter Reinholdtsen Tue, 18 Mar 2014 23:29:56 +0100 freedombox-setup (0.0.36) unstable; urgency=low [ Petter Reinholdtsen ] * Quiet down ldap-server testsuite test. * Start on Tor testsuite test. Check if wget via tor work. * Add privoxy test to check if the proxy really work. * Adjust plinth testsuite test to skip certificate check, as it is self signed and wget fail without --no-check-certificate. [ James Valleroy ] * Change setup.d/80_tor to not disable Tor socks port in the default configuration of tor. -- Petter Reinholdtsen Mon, 17 Mar 2014 06:48:57 +0100 freedombox-setup (0.0.35) unstable; urgency=low * Upload to Debian unstable. * Update the package description. * Add homepage and vcs links in control file. * Depend on essential package hostname to ensure it is pulled in also when using debootstrap --variant minbase. * Move ~fbx/README file to /usr/share/doc/ and copy it in place in setup.d/45_user-doc, to make sure file only show up when setting up a FreedomBox. -- Petter Reinholdtsen Sun, 16 Mar 2014 20:25:47 +0100 freedombox-setup (0.0.34) wheezy; urgency=low [ Nick Daly ] * Reverse roles of eth0 and eth1 ports. Now, eth0 is a DHCP client, and eth1 (if it exist) is a DHCP server. -- Petter Reinholdtsen Fri, 14 Mar 2014 22:28:48 +0100 freedombox-setup (0.0.33) wheezy; urgency=low [ Nick Daly ] * Generate random Globalscale MAC addresses, not Xerox ones. [ Petter Reinholdtsen ] * Add Bdale Garbee and Nick Daly as uploaders. -- Petter Reinholdtsen Thu, 13 Mar 2014 18:34:45 +0100 freedombox-setup (0.0.32) wheezy; urgency=low [Nick Daly] * MAC changes now apply to /etc/network/interfaces; fix docs. - The sed command shouldn't've started with "^". - Don't "wc -l" the wired interface list. - Replace deprecated "service networking restart". - Tabs to 4 spaces. (everywhere) * Moved provide-source from 60 to 99 to make sure the source of all packages are fetched for images needing source. -- Petter Reinholdtsen Fri, 28 Feb 2014 22:52:54 +0100 freedombox-setup (0.0.31) wheezy; urgency=low [ Nick Daly ] * Correct network setup to use bash and work better on the Dreamplug. -- Petter Reinholdtsen Tue, 04 Feb 2014 23:05:01 +0100 freedombox-setup (0.0.30) wheezy; urgency=low [ Petter Reinholdtsen ] * Add ntp as dependency, to make sure the clock is correct (and not 1970, as it end up as on the Raspberry PI). * Drop unused pandoc from dependency list. Thanks to Nick Daly for noticing, as it is currently missing in Jessie. [ Nick Daly ] * Drop setup.d/70_fetch-projects. Those that want to look at the source can fetch it themselves. * Drop unused setup.d/75_projects-setup. * Adjust network setup to get it working on the Dreamplug. -- Petter Reinholdtsen Mon, 27 Jan 2014 15:08:51 +0100 freedombox-setup (0.0.29) wheezy; urgency=low [ James Valleroy ] * Force overwrite of snakeoil certificates during first run script. -- Petter Reinholdtsen Mon, 02 Dec 2013 01:32:04 +0100 freedombox-setup (0.0.28) wheezy; urgency=low [ James Valleroy ] * Add setup script to install tor as bridge relay. * Fix lxc template install location. -- Petter Reinholdtsen Sun, 01 Dec 2013 18:42:49 +0100 freedombox-setup (0.0.27) wheezy; urgency=low [ James Valleroy ] * Dreamplug: after configuring network in first-run, setup persistent rules using udev script write_net_rules. -- Petter Reinholdtsen Sun, 17 Nov 2013 22:14:17 +0100 freedombox-setup (0.0.26) wheezy; urgency=low * Extend plinth-server test to check HTTP reply from plinth. * New web-proxy test to check if privoxy is listening. * Depend on lsof to make debugging easier. * Depends and recommends on batctl, bridge-utils, rfkill and wireless-tools to have the tools needed to configure wireless, bridging and batman-adv mesh networking available. Recommends for the packages that might not be available on all architectures. * Change setup.d/91_privoxy to install privoxy instead of freedombox-privoxy, as the latter seem to have no maintainer at the moment. -- Petter Reinholdtsen Sun, 03 Nov 2013 10:48:46 +0100 freedombox-setup (0.0.25) wheezy; urgency=low * Depend on vim-tiny to get some editor installed by default. * Add debug information when configuring git for etckeeper. * Change setup.d/90_apache2 to not expand variables when creating /etc/apache2/sites-available/fbx.conf. Based on patch from James Valleroy. -- Petter Reinholdtsen Sat, 02 Nov 2013 07:15:11 +0100 freedombox-setup (0.0.24) wheezy; urgency=low * Move code to set up /etc/network/interfaces from setup.d/ to first-run.d/05_network to allow it to be configured based on the detected hardware on first boot. * Move first-run flag file to /var/lib/freedombox/ for FHS compliance. * Invert logic deciding when to run the first-run init.d script, to make sure it is only run after setup.d is executed, and not by just installing freedombox-setup, to avoid surprising those testing the Debian package. -- Petter Reinholdtsen Fri, 01 Nov 2013 20:41:05 +0100 freedombox-setup (0.0.23) wheezy; urgency=low [ James Valleroy ] * Add a new apache server conf file to replace jwchat.conf and forward plinth requests to plinth.conf. [ Petter Reinholdtsen ] * Change setup.d/10_dreamplug to only add /tmp/ as tmpfs in fstab, as the code setting device names for / and /boot/ is not needed when we use vmdebootstrap. -- Petter Reinholdtsen Thu, 31 Oct 2013 18:43:35 +0100 freedombox-setup (0.0.22) wheezy; urgency=low * Add binary dependency on dnsutils for dig to get testsuite working out of the box. * Add binary dependency on hostname needed by setup.d scripts. * Avoid force removal of file to avoid warning om setup.d/98_next-is- first-run when /var/freedombox/first-run is missing. -- Petter Reinholdtsen Wed, 30 Oct 2013 09:12:06 +0100 freedombox-setup (0.0.21) wheezy; urgency=low * Disable setup.d/50_openvpn, which seem to be old cruft. * Add new dns-server check to detect if DNSSEC is enabled or not. * Make sure first-run logs output to /var/log/freedombox-first-run.log. -- Petter Reinholdtsen Tue, 29 Oct 2013 23:34:03 +0100 freedombox-setup (0.0.20) wheezy; urgency=low * Remove setup.d/85_plinth, now part of the plinth package. * Add two new testsuite checks, looking for a running Plinth and DNS server. -- Petter Reinholdtsen Mon, 28 Oct 2013 10:02:56 +0100 freedombox-setup (0.0.19) wheezy; urgency=low * Start on test suite framework. Add simple LDAP and XMPP test as a start. * Insert code in setup.d/10_dreamplug to set up Dreamplug and Raspberry Pi kernel and initrd, as well as enabling serial console on the Dreamplug, copied from the freedom-maker system. -- Petter Reinholdtsen Mon, 28 Oct 2013 08:06:10 +0100 freedombox-setup (0.0.18) wheezy; urgency=low * Update dnsmasq server configuration for new version in Debian Jessie. Patch from James Valleroy. -- Petter Reinholdtsen Sat, 19 Oct 2013 20:47:41 +0200 freedombox-setup (0.0.17) wheezy; urgency=low [ Petter Reinholdtsen ] * Added new dependencies htop, iftop and tcpdump to make it easier to debug the freedombox. Might be removed in a release build. * Added setup.d/98_next-is-first-run to make sure /var/freedombox/first-run is removed and init.d/first-run is triggered on the next reboot. * Update setup.d/85_plinth with the apache modules needed to get plinth+ssl working. -- Petter Reinholdtsen Sat, 19 Oct 2013 09:20:13 +0200 freedombox-setup (0.0.15) wheezy; urgency=low [ Nick Daly ] * Adjust setup.d/95_plinth to use Apache config from the new plinth package, which should fix SSL setup. [ Petter Reinholdtsen ] * Depend on plinth (>= 0.3.0.0.git.20131007.pere.2) to get a version that should work with the new setup.d/85_plinth file. -- Petter Reinholdtsen Mon, 07 Oct 2013 12:18:18 +0200 freedombox-setup (0.0.14) wheezy; urgency=low [ Petter Reinholdtsen ] * Make sure to exit on first error in postinst (thank you lintian). * Adjust first-run init.d script to commit to etckeeper before starting too, to document changes done at this stage. * Disable SSL in plinht, as it isn't working yet. * Fix typo causing apache to log to /error.log and /access.log for plinth. [ James Valleroy ] * Fix bug in fetch-projects that caused a few projects to end up in root directory. -- Petter Reinholdtsen Sun, 06 Oct 2013 11:42:04 +0200 freedombox-setup (0.0.13) wheezy; urgency=low * Correct etckeeper/git workaround to really detect when user.email must be set. -- Petter Reinholdtsen Sat, 05 Oct 2013 14:17:28 +0200 freedombox-setup (0.0.12) wheezy; urgency=low * Added LXC template debian-freedombox by Rob van der Hoeven from http://freedomboxblog.nl/data/lxc-debian-box.gz. * Adjusted setup.d/20_lxc to document how it could be used. * Updated LXC template debian-freedombox with changes done in lxc version 0.9.0~alpha3-2+deb8u1, to only keep the relevant changes relative to the official Debian version in Jessie. * Added postinst script to fix etckeeper user.email if the automatic value is invalid. * Added new setup.d/15_ssh-keys to remove the SSH keys before any images are created, to make sure only unique keys are used on clients. * Added new first-run.d/85_jwchat and adjusted setup.d/85_jwchat to remove ejabberd SSL certificate from images and generate it on first boot. * Added new setup.d/30_ldap-server to start on LDAP server setup. -- Petter Reinholdtsen Sat, 05 Oct 2013 13:21:25 +0200 freedombox-setup (0.0.11) wheezy; urgency=low * Fix setup.d/20_lxc, make sure to install lxc non-interactively. * Adjust setup.d/60_provide-source to skip this step if NOSOURCE=true is set, to speed up test installations. * Add the d-i preseed files to preseed/ in the source package. * Adjusted setup.d/70_fetch-projects to look up home directory and gid dynamically. Corrected GIT url for FreedomBuddy. * Adjusted setup.d/01_etckeeper-pre to set the global git user.email for root to make sure etckeeper always is able to commit changes. * Adjusted first-run init.d script to commit changes in /etc/ using etckeeper. -- Petter Reinholdtsen Tue, 01 Oct 2013 10:03:53 +0200 freedombox-setup (0.0.10) wheezy; urgency=low [ Nick Daly ] * Update handling of SSL setup in apache. [ Petter Reinholdtsen ] * Move generation of snakeoil SSL certificate from setup to first-run, to make it unique for each machine. * New script setup.d/20_lxc to set up LXC for use by the different services. -- Petter Reinholdtsen Tue, 01 Oct 2013 07:22:58 +0200 freedombox-setup (0.0.9) wheezy; urgency=low [ Petter Reinholdtsen ] * Added key-report and freedombox-todos to list of repositories feched by setup.d/70_fetch-projects. Dropped exmachina, now integrated with plinth. * Added setup.d/05_apt-sources to disable cdrom APT sources after installation, to make sure plinth can install packages without asking for a CD to be installed. * Rewrote setup.d/30_dnsmasq-server to split config in three parts, one static and two that could change. [ Nick Daly ] * Added setup.d/01_etckeeper-pre to store /etc/ status before applying FreedomBox setup. * Added code to use snakeoil SSL certificate with Apache, and put plinth behind this https connection. -- Petter Reinholdtsen Mon, 30 Sep 2013 20:38:23 +0200 freedombox-setup (0.0.8) wheezy; urgency=low * Fix typo in 90_jwchat hanging the setup. -- Petter Reinholdtsen Sun, 15 Sep 2013 23:17:09 +0200 freedombox-setup (0.0.7) wheezy; urgency=low * Fix typo in update-rc.d arguments in rules file. * Adjust setup.d/80_plinth to create apache site file with .conf ending to work with apache2 in Jessie. * Created new /usr/lib/freedombox/first-run.d/ directory and moved most code from init.d/first-run to this directory, to make the first-run code extendable using extra packages. -- Petter Reinholdtsen Sun, 15 Sep 2013 22:32:56 +0200 freedombox-setup (0.0.6) wheezy; urgency=low * Pull in libnss-myhostname and remove host name from /etc/hosts, to avoid having to update /etc/hosts when the local hostname change. * Drop unused wajig as dependency. * Make sure to commit the current status of /etc/ at the end of the setup.d run. * Adjust 90_jwchat to only update ejabberd.cfg once if it is executed several times. -- Petter Reinholdtsen Sun, 15 Sep 2013 09:51:57 +0200 freedombox-setup (0.0.5) wheezy; urgency=low * Drop prosody from dependencies, as jwchat pull in ejabberd and two XMPP servers should not be running at the same time on the Freedombox. * Drop isc-dhcp-server from dependencies and disable setup.d/40_dhcp-server for now, as dnsmasq is also providing a DHCP server and we only need one DHCP server. As dnsmasq also is the DNS server, it can not be removed without a larger rewrite of the setup. * Make sure the jwchat and ejabberd configuration contain the correct hostname and ejabberd have mod_http_bind enabled to get XMPP and jwchat working out of the box. Patch from James Valleroy. -- Petter Reinholdtsen Sun, 15 Sep 2013 06:51:29 +0200 freedombox-setup (0.0.4) wheezy; urgency=low * Add new setup.d/91_privoxy to set up freedombox-privoxy. * Remove plinth related call for 'a2enmod rewrite' in first-run, as it is already done in setup.d/80_plinth and do not have to happen during first boot. * Rewrite first-run and proxy script to use log_* functions for output. * Rewrite first-run script from bash to Bourne sh, to avoid the need to load bash during boot. -- Petter Reinholdtsen Tue, 10 Sep 2013 12:13:51 +0200 freedombox-setup (0.0.3) wheezy; urgency=low * Replace transitional package liblua5.1-sec1 with lua-sec, fixing installation problem in jessie. * Make sure to install jwchat non-interactively. -- Petter Reinholdtsen Tue, 10 Sep 2013 00:14:55 +0200 freedombox-setup (0.0.2) wheezy; urgency=low * Do not depend on jwchat, but instead pull it in using a setup.d script, to avoid failing to install when jwchat fail to install like it currently do in testing. * Add new helper script dreamplug-detect, and move all sbin tools to /usr/sbin/. -- Petter Reinholdtsen Mon, 09 Sep 2013 23:20:04 +0200 freedombox-setup (0.0.1) wheezy; urgency=low * Initial version based on setup from freedom-maker. -- Petter Reinholdtsen Mon, 09 Sep 2013 19:50:35 +0200