propellor (5.17-2) unstable; urgency=medium
* QA upload.
* libghc-propellor-doc: Mark as Multi-Arch: foreign.
* Add salsa-ci.yml to ignore some blhc false positives.
-- Andreas Beckmann <anbe@debian.org> Wed, 09 Oct 2024 14:05:43 +0200
propellor (5.17-1) unstable; urgency=medium
* QA upload.
* New upstream release. (Closes: #1054640, #1053981, #1054828)
* Clean more build artefacts. (Closes: #1045437, #1049841)
-- Andreas Beckmann <anbe@debian.org> Tue, 16 Apr 2024 19:17:26 +0200
propellor (5.17) unstable; urgency=medium
* Apt: Enable the non-free-firmware section, when used with Debian
bookworm or newer.
-- Joey Hess <id@joeyh.name> Sat, 10 Jun 2023 09:49:05 -0400
propellor (5.16) unstable; urgency=medium
* Debootstrap: Added UseOldGpgKeyring constructor to DebootstrapConfig,
which allows bootstrapping ancient stable releases of Debian.
* Qemu: Install binfmt-support along with qemu-user-static.
* Fix build with unix-2.8.0.0 and with unix-compat-0.7.
-- Joey Hess <id@joeyh.name> Mon, 29 May 2023 11:24:25 -0400
propellor (5.15) unstable; urgency=medium
* Improve propellor's MetaTypes implementation to avoid an expontential
blowup when several MetaTypes fail to unify. This should result in less
memory use by ghc when there's a type error.
* Avoid OOM when built by ghc 9.2.
* Thanks to the ghc developers for their assistance, particularly spj
and Sam Derbyshire.
* Remove workaround to ghc using a lot of memory displaying an error
message about a property of a host having the wrong number of
arguments. This brings back clear error messages in such situations.
-- Joey Hess <id@joeyh.name> Tue, 15 Nov 2022 15:34:11 -0400
propellor (5.14) unstable; urgency=medium
* Removed Propellor.Property.OpenID module, since the simpleid package
got removed from Debian.
* Renamed Linode.mlocateEnabled to Linode.locateEnabled, and made it also
make sure plocate is enabled, if it's installed rather than mlocate.
(API change)
* Debootstrap.built: Stop using the deprecated qemu-debootstrap
for bootstrapping foreign architectures. It is not needed since qemu
2.12, which, at least on Debian, enabled the
binfmt-support --fix-binary option.
* Qemu.removeHostEmulationBinary: Removed this property, which is no
longer necessary since qemu-debootstrap is not used.
(API change)
* Flashkernel.installed: Deal with a behavior change in flash-kernel,
which will fail to install if is not configured first.
* Systemd.resolvConfed is no longer enabled by default in systemd
containers. It is probably not necessary on current systems the way it
was back in 2014, and this avoids a problem where the host's
/etc/resolv.conf gets overwritten when systemd is managing the
container's /etc/resolv.conf.
* Borg: To support borg 1.2, run borg compact to free up space after pruning.
* Add lower bounds on async and split.
Thanks, Simon Jakobi
* propellor.cabal: Deduplicate exposed modules, which fixes a build
problem with recent cabal versions.
Thanks, Simon Jakobi
-- Joey Hess <id@joeyh.name> Sat, 15 Oct 2022 14:40:31 -0400
propellor (5.13-3) unstable; urgency=medium
* QA upload.
* Move packaging repository to salsa.
* Set Rules-Requires-Root: no.
* Update Lintian overrides.
-- Andreas Beckmann <anbe@debian.org> Fri, 03 Feb 2023 13:36:11 +0100
propellor (5.13-2) unstable; urgency=medium
* QA upload.
* Set Maintainer to Debian QA Group. (See: #990802)
* Rebuild against ghc 9. (Closes: #1020254)
-- Andreas Beckmann <anbe@debian.org> Sun, 30 Oct 2022 20:00:50 +0100
propellor (5.13-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 16 Aug 2021 12:30:33 -0700
propellor (5.13) unstable; urgency=medium
* Network: Added support for network interfaces with several address
stanzas, eg ipv4 and ipv6.
Thanks, Nicolas Schodet
* Sudo.enabledFor: Deal with new @includedir syntax in sudoers file.
* Apt.securityUpdates: Stop generating testing-security lines, as
testing-security is unused per debian documentation.
* Utility.HumanNumber: Fix rounding bug that could result in
sometimes quite wrong values, eg "1.1 GB" when the input value was a
few bytes less than 2 GB. Properties in Ccache and Journald that
used it to generate config files were affected by this bug.
-- Joey Hess <id@joeyh.name> Fri, 30 Jul 2021 10:02:19 -0400
propellor (5.12-1) unstable; urgency=medium
* New upstream release.
* Drop Makefile patch in last upload.
Applied upstream.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 14 Sep 2020 11:55:19 -0700
propellor (5.12) unstable; urgency=medium
* Worked around a situation where ghc uses insane amounts of memory
displaying an error message about a property of a host having the
wrong number of arguments.
* Added libghc-type-errors-dev to debian/control recommends, and
install it if available when bootstrapping propellor.
* Borg: add UseUmask to BorgRepoOpt.
Thanks, Nicolas Schodet
* Borg: use "{now}" instead of $(date ...)
Thanks, Nicolas Schodet
* Makefile: Deal with cabal change that made sdist
not output tarball to stdout.
Thanks, Sean Whitton
-- Joey Hess <id@joeyh.name> Mon, 14 Sep 2020 12:06:46 -0400
propellor (5.11-1) unstable; urgency=medium
* New upstream release (Closes: #969621).
* Patch Makefile for new ./Setup losing ability to output to stdout.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 13 Sep 2020 20:47:04 -0700
propellor (5.11) unstable; urgency=medium
* Fix display of concurrent output from processes when using
Propellor.Property.Conductor.
(Reversion introduced in version 5.5.0.)
* Support bootstrapping to hosts using cabal 3.x, with new-dist directory.
* Makefile: Fix build with cabal 3.x.
* Borg.restored: Fix restoration, which has apparently never worked,
at least back to borg 1.0.9.
Thanks, Nicolas Schodet.
* Borg.init: Added the now required encryption type parameter.
Thanks, Nicolas Schodet.
(API change)
-- Joey Hess <id@joeyh.name> Fri, 14 Aug 2020 16:02:14 -0400
propellor (5.10.2-2) unstable; urgency=medium
* Rebuild the arch:all package against newer ghc (Closes: #966661).
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 02 Aug 2020 15:19:15 -0700
propellor (5.10.2-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 17 May 2020 16:39:27 -0700
propellor (5.10.2) unstable; urgency=medium
* Fix build with ghc 8.6.3.
Thanks, Robin Munn
* Bootstrap: Fix typo in Arch Linux dependencies.
Thanks, Robin Munn
* Bootstrap: Add haskell-type-errors package on Arch Linux.
Thanks, Robin Munn
* Apt.buildDepIn: Run build-dep command in a temporary directory,
since it may sometimes not clean up all the files it creates.
-- Joey Hess <id@joeyh.name> Fri, 01 May 2020 16:47:31 -0400
propellor (5.10.1-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Fri, 15 Nov 2019 11:26:38 -0700
propellor (5.10.1) unstable; urgency=medium
[ Joey Hess ]
* Localdir.hasOriginUrl: Depend on Git.installed.
* Localdir.hasOriginUrl: Type changed from UnixLike to DebianLike
because Git.installed is not implemented for other unixes.
(API change)
* Changed the ChrootBootstrapper type class's buildchroot method
to take a Info parameter, instead of Maybe System.
(The System can be extracted from the Info.)
(API change)
[ Sean Whitton ]
* Chroot.{de,}bootstrapped uses the chroot's configured apt proxy and
mirror, if these exist, when debootstrapping the chroot.
* Rename Sbuild.useHostProxy -> Chroot.useHostProxy. (API change)
-- Joey Hess <id@joeyh.name> Fri, 15 Nov 2019 13:26:19 -0400
propellor (5.9.1-1) unstable; urgency=medium
* New upstream release.
* Add {build-,}dep on libghc-type-errors-dev.
* Drop fix-libvirt.hs-haddock-build.patch.
Applied upstream.
-- Sean Whitton <spwhitton@spwhitton.name> Fri, 13 Sep 2019 13:23:43 -0700
propellor (5.9.1) unstable; urgency=medium
* Apt: Debian has changed the name of the suite for testing security updates
from testing to testing-security.
* Apt: Also the suite for stable releases from bullseye on will be
suffixed with "-security".
* Apt.update: Pass --allow-releaseinfo-change when updating Unstable
or Testing, so that code name changes that happen in those suites
during a stable release don't prevent updating the rolling suites.
* Systemd.machined: Fix a bug that caused the systemd-container package
to not be installed when used with Debian buster.
-- Joey Hess <id@joeyh.name> Wed, 17 Jul 2019 15:59:29 -0400
propellor (5.9.0) unstable; urgency=medium
* Added custom type error messages when Properties don't combine due to
conflicting MetaTypes.
* Added custom type error messages for ensureProperty and tightenTargets.
* Note that those changes made ghc 8.0.1 in a few cases unable to infer
types when ensureProperty or tightenTargets is used, while later ghc
versions had no difficulty. If this affects building your properties,
adding a type annotation to the code will work around the problem.
* Added custom type error messages displayed when type inference
fails when using ensureProperty and tightenTargets, that suggest
adding a type annotation.
* Use the type-errors library to detect when the type checker gets stuck
unable to reduce type-level operations on MetaTypes, and avoid
displaying massive error messages.
* But, since type-errors is a new library not available in eg Debian
yet, added a WithTypeErrors build flag. When the library is not
available, cabal will automatically disable that build flag,
and it will build without the type-errors library.
* EnsurePropertyAllowed, TightenTargetsAllowed, and CheckCombinable
types have changed to Constraint.
(API change)
* Try harder to avoid displaying an excessive amount of type error
messages when many properties have been combined in a props list.
* Libvirt.installed: install libvirt-daemon-system
Thanks, David Bremner
-- Joey Hess <id@joeyh.name> Tue, 02 Jul 2019 16:27:07 -0400
propellor (5.8.0) unstable; urgency=medium
* Fix bug in File.containsShellSetting that replaced whole shell conffile
content with the setting if the file did not previously contain a line
setting the key to some value.
* Removed inChroot, instead use hasContainerCapability FilesystemContained.
(API change)
* Hostname: Properties that used to not do anything in a systemd or
docker container will now change the container's hostname,
since it's namespaced.
* Add User.ownsWithPrimaryGroup
Thanks, Sean Whitton
* Ssh.userKeys, Ssh.userKeyAt: Create .ssh directory when it does not yet
exist.
* Ssh.userKeyAt: When a relative filepath is provided, it's put inside
the user's .ssh directory.
* Fix Git.pulled always reporting a change.
Thanks, Sean Whitton
-- Joey Hess <id@joeyh.name> Fri, 26 Apr 2019 08:23:29 -0400
propellor (5.7.0) unstable; urgency=medium
* Sbuild.built no longer includes Apt.stdSourcesList by default,
in order to support non-Debian OS's. (API change)
To upgrade: Simply add Sbuild.osDebianStandard to all Sbuild.built
calls which have osDebian.
Thanks, Sean Whitton
* Propellor.Property.PropellorRepo renamed to Propellor.Property.Localdir
to widen its scope. (API change)
* Added Localdir.removed property.
Thanks, Sean Whitton
* Sbuild.built uses Localdir.removed to clean up the propellor localdir
after it's done running in a schroot.
Thanks, Sean Whitton
* Cron.runPropellor made revertable. (minor API change)
Thanks, Sean Whitton
* Added Cron.jobDropped.
Thanks, Sean Whitton
* Added Utility.FileMode to the modules exported by Propellor.Utilities
to propellor library users.
-- Joey Hess <id@joeyh.name> Fri, 05 Apr 2019 11:59:52 -0400
propellor (5.6.1) unstable; urgency=medium
* fix Libvirt.hs haddock build
Thanks, Sean Whitton
-- Joey Hess <id@joeyh.name> Sun, 20 Jan 2019 19:06:39 -0400
propellor (5.6.0-1) unstable; urgency=medium
* New upstream release.
* Drop cherry picked patch.
Included in this release.
* Patch Libvirt.hs to fix Haddock build.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 20 Jan 2019 15:25:47 -0700
propellor (5.6.0) unstable; urgency=medium
* withOS had a type level bug that allowed ensureProperty to be used inside
it with a Property that does not match the type of the withOS itself.
(API change)
The fix may cause some of your valid uses of withOS to no longer type
check; the best way to work around that is to use pickOS to pick between
several properties that are further specialized using withOS.
For an example of how to do that, see the source code to
Propellor.Property.Borg.installed
* Propellor.Property.Cron.runPropellor is a Property DebianLike; it was
incorrectly a Property UnixLike before and that wrong type was hidden by
the withOS bug.
* Some openbsd portability fixes. Thanks, rsiddharth.
* Added Libvirt module. Thanks, Sean Whitton.
* When bootstrapping on Debian, libghc-stm-dev may not be available,
as it's become part of ghc, so check before trying to install it.
* Fix build with ghc 8.6.3.
* Avoid exposing the constructor of OuterMetaTypesWitness, to avoid
the kind of mistake that led to the withOS bug.
* Merged Utility changes from git-annex.
* Fix --spin crash when ~/.ssh/ directory did not already exist.
-- Joey Hess <id@joeyh.name> Fri, 18 Jan 2019 12:11:53 -0400
propellor (5.5.0-2) unstable; urgency=medium
* Cherry pick upstream commit d2a526833f7178a04b00704890cf6ee8c1187618
- Drop build-dep on haskell-stm.
- Build-dep on ghc (>= 8.4.3), with which haskell-stm is now bundled
- In Bootstrap, still try to install haskell-stm, but suppress error from
apt if not installable.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 04 Dec 2018 21:34:10 -0700
propellor (5.5.0-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 20 Oct 2018 18:42:33 -0700
propellor (5.5.0) unstable; urgency=medium
* letsencrypt': Pass --expand to support expanding the list of domains
* Split mailname property out of Hostname.sane, since bad mailname
guesses can lead to ugly surprises. (API change)
* Removed HostingProvider.CloudatCost module as it lacks a maintainer.
(If anyone would like to maintain it, send a patch adding it back.)
(API change)
* Added Systemd.escapePath helper function useful when creating mount
units.
* Added Sudo.sudoersDFile property.
* Sudo.enabledFor: Write to /etc/sudoers.d/000users rather than to
/etc/sudoers. (Any old lines it wrote to /etc/sudoers will be removed.)
This fixes a potential ordering problem; the property used to append
the line to /etc/sudoers, but that would override more specific lines
in the include directory.
* Borg: Added UsesEnvVar.
* Added DiskImage.noBootloader, useful for eg, direct booting with
qemu. Thanks, David Bremner.
* Added Apt.backportInstalledMin.
-- Joey Hess <id@joeyh.name> Sat, 20 Oct 2018 21:00:27 -0400
propellor (5.4.1-1) unstable; urgency=medium
* New upstream release.
- Tighten build-dep on git to require 2.0.
* Drop Recommends: from libghc-propellor-doc. See #905892.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 11 Aug 2018 11:22:52 +0100
propellor (5.4.1) unstable; urgency=medium
* Modernized and simplified the MetaTypes implementation now that
compatability with ghc 7 is no longer needed.
* Use git verify-commit to verify gpg signatures, rather than the old
method of parsing git log output. Needs git 2.0.
* Added ConfFile.containsShellSetting, ConfFile.lacksShellSetting,
and EtcDefault.set properties. Thanks, Sean Whitton
* Dns: Support TXT values longer than bind's maximum string length
of 255 bytes. Thanks, rsiddharth.
* Docker and HostingProvider.CloudAtCost modules are not being
maintained, so marked them as such.
Seeking a maintainer for the Docker module; I anticipate
removing the CloudAtCost module in the next API bump.
-- Joey Hess <id@joeyh.name> Wed, 08 Aug 2018 10:29:27 -0400
propellor (5.4.0-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 12 Jul 2018 09:27:16 +0100
propellor (5.4.0) unstable; urgency=medium
[ Sean Whitton ]
* Apt.installedBackport replaced with Apt.backportInstalled. (API change)
The old property would install dependencies from backports even when
the versions in stable satisfy the requested backport's dependencies.
The new property installs only the listed packages from backports;
all other dependencies come from stable.
So in some cases, you may need to list additional backports to install,
that would not have needed to be listed before. Due to this behavior
change the property has been renamed so uses of it will be checked.
* Restic.installed: stop trying to install a backport on jessie, because no
such backport exists.
-- Joey Hess <id@joeyh.name> Thu, 17 May 2018 10:43:20 -0400
propellor (5.3.6-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 13 May 2018 15:33:42 -0700
propellor (5.3.6) unstable; urgency=medium
* Fix build with ghc 8.4, which broke due to the Semigroup Monoid change.
* Dropped support for building propellor with ghc 7 (as in debian
oldstable), to avoid needing to depend on the semigroups transitional
package, but also because it's just too old to be worth supporting.
* stack.yaml: Updated to lts-9.21.
* Make Schroot.overlaysInTmpfs revertable
Thanks, Sean Whitton
* Update shim each time propellor is run in a container, to deal with
library version changes.
* Unbound: Added support for various DNS record types.
Thanks, Félix Sipma.
-- Joey Hess <id@joeyh.name> Wed, 09 May 2018 16:24:37 -0400
propellor (5.3.5-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 28 Apr 2018 13:03:55 -0700
propellor (5.3.5) unstable; urgency=medium
* Apt.stdSourcesList now adds stable-updates suite
Thanks, Sean Whitton
* Significantly increased propellor build speed when your config.hs
is in a fork of the propellor repository, by avoiding redundant builds
of propellor library.
-- Joey Hess <id@joeyh.name> Sun, 22 Apr 2018 12:27:45 -0400
propellor (5.3.4-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 29 Mar 2018 10:25:50 -0700
propellor (5.3.4) unstable; urgency=medium
* Apt.trustsKey: Use apt-key to add key rather than manually driving gpg,
which seems to not work anymore.
Thanks, Russell Sim.
* Firewall: Reorder iptables parameters that are order
dependant to make --to-dest and --to-source work.
Thanks, Russell Sim
-- Joey Hess <id@joeyh.name> Wed, 21 Mar 2018 14:59:15 -0400
propellor (5.3.3-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 26 Feb 2018 14:46:09 -0700
propellor (5.3.3) unstable; urgency=medium
* Warn again about new upstream version when ~/.propellor was cloned from the
Debian git bundle using an older version of propellor that set up an
upstream remote.
* Avoid crashing if initial fetch from origin fails when spinning a host.
* Added Propllor.Property.Openssl module contributed by Félix Sipma.
-- Joey Hess <id@joeyh.name> Mon, 26 Feb 2018 14:34:37 -0400
propellor (5.3.2-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 18 Feb 2018 14:34:00 -0700
propellor (5.3.2) unstable; urgency=medium
* Added Propellor.Property.Atomic, which can make a non-atomic property
that operates on a directory into an atomic property.
(Inspired by Vaibhav Sagar's talk on Functional Devops in a
Dysfunctional World at LCA 2018.)
* Added Git.pulled.
* Systemd.machined: Install systemd-container on Debian
stretch.
Thanks, Sean Whitton
-- Joey Hess <id@joeyh.name> Sun, 18 Feb 2018 14:31:39 -0400
propellor (5.3.1-1) unstable; urgency=medium
* New upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 05 Feb 2018 21:27:41 -0700
propellor (5.3.1) unstable; urgency=medium
* Last release mistakenly contained my personal branch not master.
* contrib/post-merge-hook documentation updated to recommend also using
it as a post-checkout hook, to avoid such problems.
-- Joey Hess <id@joeyh.name> Sun, 04 Feb 2018 12:00:03 -0400
propellor (5.3.0) unstable; urgency=medium
* Avoid bogus warning about new upstream version when /usr/bin/propellor
is run on a Debian system, but ~/.propellor was not cloned from the
Debian git bundle.
* Parted: Allow partitions to have no filesystem, for eg, GPT BIOS boot
partitions. (API change)
* Added rawPartition to PartSpec, for specifying partitions with no
filesystem.
* Added BiosGrubFlag to PartFlag.
* Add HasCallStack constraint to pickOS and unsupportedOS, so the
call stack includes the caller.
* Run su with --login, to avoid inheriting some problematic environment
variables, such as TMP, from the caller.
* Grub: Added properties to configure /etc/default/grub.
* Laptop: New module, starting with powertopAutoTuneOnBoot.
-- Joey Hess <id@joeyh.name> Thu, 01 Feb 2018 12:27:01 -0400
propellor (5.2.0-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 02 Jan 2018 11:06:08 +0000
propellor (5.2.0) unstable; urgency=medium
[ Joey Hess ]
* bootstrappedFrom: Set up local privdata file.
* Parted: Fix names used for FAT and VFAT partitions.
* Parted: Add an Alignment parameter. (API change)
A good default to use is safeAlignment, which is 4MiB,
well suited for inexpensive flash drives, and fine for other disks too.
Previously, a very non-optimial 1MB (not 1MiB) alignment had been used.
* DiskImage: Use safeAlignment. It didn't seem worth making the
alignment configurable here.
* Fixed rounding bug in Parted.calcPartTable.
* DiskImage: Fix rsync crash when a mount point does not exist in the
chroot.
* Fix bug in unmountBelow that caused unmounting of nested mounts to
fail.
* Grub.boots, Grub.bootsMounted: Pass --target to grub-install.
* Added Propellor.Property.Installer modules, which can be used to create
bootable installer disk images, which then run propellor to install
a system. This code was extracted from the demo I gave in my
talk at DebConf 2017.
[ Sean Whitton ]
* Sbuild: add notes about Debian jessie hosts and backports of sbuild and
autopkgtest.
-- Joey Hess <id@joeyh.name> Sat, 30 Dec 2017 13:34:29 -0400
propellor (5.1.0-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 23 Nov 2017 14:49:17 -0700
propellor (5.1.0) unstable; urgency=medium
[ Sean Whitton ]
* File.isSymlinkedTo now revertable. (minor API change)
* Sbuild module changes:
- Type of Sbuild.built changed to accept additional properties to be
ensured inside schroots. (API change)
See the suggested usage in module's documentation for new syntax.
- Drop Sbuild.installed, Sbuild.builtFor, Sbuild.updated,
Sbuild.updatedFor. (API change)
Use Sbuild.built instead. See suggested usage in module's documentation.
- Propellor no longer sets up apt proxies in sbuild chroots automatically.
Instead, pass the new Sbuild.useHostProxy to Sbuild.built to have
Propellor propagate the host's Apt proxy configuration into the chroot.
See suggested usage in module's documentation.
- Internally, Propellor no longer invokes sbuild-createchroot(1) to build
schroots.
- Update documentation.
-- Joey Hess <id@joeyh.name> Thu, 23 Nov 2017 10:38:16 -0400
propellor (5.0.0) unstable; urgency=medium
* Debootstrap.built now supports bootstrapping chroots for foreign
OS's, using qemu-user-static.
* Machine: New module collecting machine-specific properties for
building bootable images for ARM boards.
Tested working boards: Olimex Lime, CubieTruck, Banana Pi, SheevaPlug.
* Diskimage.imageBuiltFor: New property to build a disk image for a Host,
using partition table information configured via the new properties
hasPartitionTableType, hasPartition and adjustPartition.
* Chroot.noServices moved to Service.noServices and its type changed.
(API change)
* Service: Avoid starting services when noServices is used.
* Add Typeable instance to OriginUrl, fixing build with old versions
of ghc.
* Added Propellor.Property.impossible
* Fail2Ban: Added several additional properties.
Thanks, Félix Sipma.
* Fail2Ban: Renamed jail.d conf file to use .local.
Thanks, Félix Sipma.
-- Joey Hess <id@joeyh.name> Sun, 19 Nov 2017 15:42:44 -0400
propellor (4.9.0-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 26 Oct 2017 12:55:35 -0700
propellor (4.9.0) unstable; urgency=medium
* When the ipv4 and ipv6 properties are used with a container, avoid
propagating the address out to the host.
* DnsInfo has been replaced with DnsInfoPropagated and
DnsInfoUnpropagated. (API change)
* Code that used fromDnsInfo . fromInfo changes to use getDnsInfo.
* addDNS takes an additional Bool parameter to control whether
the DNS info should propagate out of containers. (API change)
* Made the PropellorRepo.hasOriginUrl property override the repository
url that --spin passes to a host.
* PropellorRepo.hasOriginUrl type changed to include HasInfo. (API change)
* Fstab.mounted: Create mount point if necessary, and mount it
if it's not already mounted.
Thanks, Nicolas Schodet
* Properties that check for an empty directory now treat a directory
containing only "lost+found" as effectively empty, to support
situations where the directory is a mount point of an EXT* filesystem.
Thanks, Nicolas Schodet
* Make addInfo accumulate Info in order properties appear, not
reverse order.
This fixes a bug involving reverting Systemd.resolvConfed or
Systemd.linkJournal.
-- Joey Hess <id@joeyh.name> Wed, 25 Oct 2017 13:02:14 -0400
propellor (4.8.1-1) unstable; urgency=medium
* Package new upstream release.
* Bump standards version to 4.1.0 (no changes required).
-- Sean Whitton <spwhitton@spwhitton.name> Wed, 27 Sep 2017 16:25:39 -0700
propellor (4.8.1) unstable; urgency=medium
* Borg: Fix propigation of exit status of borg backup.
* Borg: Fix handling of UseSshKey.
-- Joey Hess <id@joeyh.name> Mon, 25 Sep 2017 17:19:49 -0400
propellor (4.8.0) unstable; urgency=medium
* DiskImage: Made a DiskImage type class, so that different disk image
formats can be implemented. The properties in this module can generate
any type that is a member of DiskImage. (API change)
(To convert existing configs, convert the filename of the disk image
to RawDiskImage filename.)
* Removed DiskImage.vmdkBuiltFor property. (API change)
Instead, use VirtualBoxPointer in the property that creates the disk
image.
* Apt.isInstalled: Fix handling of packages that are not known at all
to apt.
* Borg: Converted BorgRepo from a String alias to a data type.
(API change)
* Borg: Allow specifying ssh private key to use when accessing a borg
repo by using the BorgRepoUsing constructor with UseSshKey.
* Borg: Fix broken shell escaping in borg cron job.
* Attic: Fix broken shell escaping in attic cron job.
* Make lock file descriptors close-on-exec.
* Lvm: New module for setting up LVM volumes.
Thanks, Nicolas Schodet
-- Joey Hess <id@joeyh.name> Mon, 25 Sep 2017 14:37:52 -0400
propellor (4.7.7-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 26 Aug 2017 11:39:06 -0700
propellor (4.7.7) unstable; urgency=medium
* Locale: Display an error message when /etc/locale.gen does not contain
the requested locale.
* Attic module is deprecated and will warn when used.
Attic is no longer available in Debian and appears to have been
mostly supersceded by Borg.
* Obnam module is deprecated and will warn when used.
Obnam has been retired by its author.
* Add Typeable instance to Bootstrapper, fixing build with old versions
of ghc. (Previous attempt was incomplete.)
-- Joey Hess <id@joeyh.name> Wed, 23 Aug 2017 12:15:31 -0400
propellor (4.7.6-1) unstable; urgency=medium
* Package new upstream release.
* Bump debhelper compat to 10.
* Bump std-ver to 4.0.1 (no changes required).
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 17 Aug 2017 17:30:30 -0700
propellor (4.7.6) unstable; urgency=medium
* Sbuild: Add Sbuild.userConfig property.
Thanks, Sean Whitton
* Locale: Make sure that the locales package is installed when enabling
locales.
-- Joey Hess <id@joeyh.name> Tue, 01 Aug 2017 17:59:07 -0400
propellor (4.7.5) unstable; urgency=medium
* Avoid crashing when getTerminalName fails due to eg, being in a chroot.
-- Joey Hess <id@joeyh.name> Tue, 01 Aug 2017 15:28:58 -0400
propellor (4.7.4) unstable; urgency=medium
* Set GPG_TTY when run at a terminal, so that gpg can do password
prompting despite being connected by pipes to propellor (or git).
* Rsync: Make rsync display less verbose.
* Improve PROPELLOR_TRACE output so serialized trace values always
come on their own line, not mixed with title setting.
-- Joey Hess <id@joeyh.name> Tue, 01 Aug 2017 13:30:54 -0400
propellor (4.7.3) unstable; urgency=medium
* Expand the Trace data type.
-- Joey Hess <id@joeyh.name> Sat, 29 Jul 2017 17:26:32 -0400
propellor (4.7.2) unstable; urgency=medium
* Added PROPELLOR_TRACE environment variable, which can be set to 1 to
make propellor output serialized Propellor.Message.Trace values,
for consumption by another program.
* Rsync: Make rsync display its progress, in a minimal format to avoid
scrolling each file down the screen.
-- Joey Hess <id@joeyh.name> Sat, 29 Jul 2017 15:49:00 -0400
propellor (4.7.1) unstable; urgency=medium
* Added Mount.isMounted.
* Grub.bootsMounted: Bugfix.
-- Joey Hess <id@joeyh.name> Fri, 28 Jul 2017 22:22:40 -0400
propellor (4.7.0) unstable; urgency=medium
* Add Apt.proxy property to set a host's apt proxy.
Thanks, Sean Whitton.
* Add Apt.useLocalCacher property to set up apt-cacher-ng.
Thanks, Sean Whitton.
* Rework Sbuild properties to use apt proxies/cachers instead of
bind-mounting the host's apt cache. This makes it possible to run more
than one build at a time, and lets sbuild run even if apt's cache is
locked by the host's apt.
Thanks, Sean Whitton.
* Sbuild: When Apt.proxy is set, it is assumed that the proxy does some
sort of caching, and sbuild chroots are set up to use the same proxy.
* Sbuild: When Apt.proxy is not set, install apt-cacher-ng, and point
sbuild chroots at the local apt cacher.
* Sbuild: Droped Sbuild.piupartsConfFor, Sbuild.piupartsConf,
Sbuild.shareAptCache
(API change)
No longer needed now that we are using apt proxies/cachers.
* Sbuild: Updated sample config in haddock for Propellor.Property.Sbuild.
If you use this module, please compare both your config.hs and
your ~/.sbuildrc with the haddock documentation.
* Grub.bootsMounted: Avoid failing when proc sys etc are already mounted
within the chroot.
-- Joey Hess <id@joeyh.name> Fri, 28 Jul 2017 20:42:35 -0400
propellor (4.6.2) unstable; urgency=medium
* Systemd.nspawned: Recent systemd versions such as 234 ignore
non-symlinks in /etc/systemd/system/multi-user.target.wants,
which was used to configure systemd-nspawn parameters. Instead,
use a service.d/local.conf file to configure that.
* Grub: Added bootsMounted property, a generalization of
DiskImage.grubBooted
-- Joey Hess <id@joeyh.name> Fri, 28 Jul 2017 15:48:32 -0400
propellor (4.6.1) unstable; urgency=medium
* Added Network.dhcp' and Network.static', which allow specifying
additional options for interfaces files.
* Fix build failure on ghc-8.2.1
Thanks, Sergei Trofimovich.
* DiskImage: Fix strictness bug in .parttable read/write sequence.
-- Joey Hess <id@joeyh.name> Thu, 27 Jul 2017 09:17:32 -0400
propellor (4.6.0) unstable; urgency=medium
* Add Typeable instance to Bootstrapper, fixing build with old versions
of ghc.
* Network.static changed to take address and gateway parameters.
If you used the old Network.static property, it has been renamed to
Network.preserveStatic.
(Minor API change)
-- Joey Hess <id@joeyh.name> Wed, 26 Jul 2017 20:02:50 -0400
propellor (4.5.2) unstable; urgency=medium
* Added Rsync.installed property.
* Added DiskImage.vmdkBuiltFor property which is useful for booting
a disk image in VirtualBox.
-- Joey Hess <id@joeyh.name> Tue, 25 Jul 2017 17:58:46 -0400
propellor (4.5.1) unstable; urgency=medium
* Reboot.toKernelNewerThan: If running kernel is new enough, avoid
looking at what kernels are installed.
Thanks, Sean Whitton.
* DiskImage: Avoid re-partitioning disk image unncessarily, for a large
speedup.
-- Joey Hess <id@joeyh.name> Tue, 25 Jul 2017 15:51:33 -0400
propellor (4.5.0) unstable; urgency=medium
* Generalized the PartSpec DSL, so it can be used for both
disk image partitioning, and disk device partitioning, with
different partition sizing methods as appropriate for the different
uses. (minor API change)
* Propellor.Property.Parted: Added calcPartTable function which uses
PartSpec DiskPart, and a useDiskSpace combinator.
* Generate a better description for versioned properties.
-- Joey Hess <id@joeyh.name> Fri, 21 Jul 2017 16:40:13 -0400
propellor (4.4.0) unstable; urgency=medium
* Propellor.Property.Timezone: New module, contributed by Sean Whitton.
* Propellor.Property.Sudo.enabledFor: Made revertable.
(minor API change)
* Propellor.Property.LightDM.autoLogin: Made revertable.
(minor API change)
* Propellor.Property.Conffile: Added lacksIniSetting.
-- Joey Hess <id@joeyh.name> Mon, 17 Jul 2017 12:55:02 -0400
propellor (4.3.4) unstable; urgency=medium
* Propellor.Property.Versioned: New module which allows different
versions of a property or host to be written down in a propellor config
file. Has many applications, including staged upgrades and rollbacks.
* LightDM.autoLogin: Use [Seat:*] rather than the old [SeatDefaults].
The new name has been supported since lightdm 1.15.
-- Joey Hess <id@joeyh.name> Sat, 15 Jul 2017 17:22:53 -0400
propellor (4.3.3) unstable; urgency=medium
* Hosts can be configured to build propellor using stack, by adding
a property:
& bootstrapWith (Robustly Stack)
* Hosts can be configured to build propellor using cabal, but using
only packages installed from the operating system. This
will work on eg Debian:
& bootstrapWith OSOnly
* Iproved fix for bug that sometimes made --spin fail with
"fatal: Couldn't find remote ref HEAD". The previous fix didn't work
reliably.
* User: add systemGroup and use it for systemAccountFor'
Thanks, Félix Sipma.
* Export a Restic.backup' property.
Thanks, Félix Sipma.
* Updated stack config to lts-8.22.
-- Joey Hess <id@joeyh.name> Thu, 13 Jul 2017 12:34:09 -0400
propellor (4.3.2) unstable; urgency=medium
* Really include Propellor.Property.FreeDesktop.
-- Joey Hess <id@joeyh.name> Thu, 06 Jul 2017 17:28:53 -0400
propellor (4.3.1) unstable; urgency=medium
* Added Propellor.Property.FreeDesktop module.
* Added reservedSpacePercentage to the PartSpec EDSL.
-- Joey Hess <id@joeyh.name> Thu, 06 Jul 2017 17:03:15 -0400
propellor (4.3.0) unstable; urgency=medium
* DiskImage: Removed grubBooted; properties that used to need it as a
parameter now look at Info about the bootloader that is installed in
the chroot that the disk image is created from.
(API change)
-- Joey Hess <id@joeyh.name> Wed, 05 Jul 2017 21:04:04 -0400
propellor (4.2.0) unstable; urgency=medium
* DiskImage.grubBooted no longer takes a BIOS parameter,
and no longer implicitly adds Grub.installed to the properties of
the disk image. If you used DiskImage.grubBooted, you'll need to update
your propellor configuration, removing the BIOS parameter from
grubBooted and adding a Grub.installed property to the disk image, eg:
& Grub.installed PC
(API change)
* Grub.installed: Avoid running update-grub when used in a chroot, since
it will get confused.
* DiskImage.Finalization: Simplified this type since it does not need to
be used to install packages anymore. (API change)
-- Joey Hess <id@joeyh.name> Wed, 05 Jul 2017 18:10:49 -0400
propellor (4.1.0) unstable; urgency=medium
* User.hasInsecurePassword makes sure shadow passwords are enabled,
so if the insecure password is later changed, the new password won't be
exposed.
* Bugfix: Apache.httpsVirtualHost' must create ssl/hn/ dir earlier
Thanks, Sean Whitton.
* Bootstrap.clonedFrom: Fix bug that broke copying .git/config into
chroot.
* Diskimage.imageExists: Align disk image size to multiple of 4096
sector size, since some programs (such as VBoxManage convertdd)
refuse to operate on disk images not aligned to a sector size.
* Bootstrap.bootstrappedFrom: Fix bug that caused propellor to only
be built from the bootstrapped config the first time.
* Bootstrap.bootstrappedFrom: Avoid doing anything when not run in a
chroot.
* When provisioning a container, output was buffered until the whole
process was done; now output will be displayed immediately.
* LightDM.autoLogin: Make it require LightDM.installed.
(minor API change as the type changed)
* Propellor.Property.XFCE added with some useful properties for the
desktop environment.
* Added File.applyPath property.
* Added File.checkOverwrite.
* File.isCopyOf: Fix bug that prevented this property from working
when the destination file did not yet exist.
-- Joey Hess <id@joeyh.name> Wed, 05 Jul 2017 17:30:00 -0400
propellor (4.0.6-1) unstable; urgency=medium
* Package new upstream release.
- Drop {build-,}dependency on libghc-missingh-{dev,prof}
- Add {build-,}dependencies on libghc-{split,hashable}-{dev,prof}.
* Bump standards version to 4.0.0 (no changes required).
* Update Vcs-Browser URI.
-- Sean Whitton <spwhitton@spwhitton.name> Wed, 21 Jun 2017 13:41:27 +0100
propellor (4.0.6) unstable; urgency=medium
* Fix bug that sometimes made --spin fail with
"fatal: Couldn't find remote ref HEAD"
* Display error and warning messages to stderr, not stdout.
-- Joey Hess <id@joeyh.name> Sun, 18 Jun 2017 19:30:50 -0400
propellor (4.0.5) unstable; urgency=medium
* Switch cabal file from Extensions to Default-Extensions to fix
new picky hackage rejection.
-- Joey Hess <id@joeyh.name> Sat, 03 Jun 2017 15:07:36 -0400
propellor (4.0.4) unstable; urgency=medium
* Propellor.Property.Restic added for yet another backup program.
Thanks, Félix Sipma.
* Removed dependency on MissingH, instead depends on split and hashable.
-- Joey Hess <id@joeyh.name> Sat, 03 Jun 2017 14:56:44 -0400
propellor (4.0.3) unstable; urgency=medium
* Added Fstab.listed, Fstab.swap, and Mount.swapOn properties.
Thanks, Daniel Brooks.
* Added Propellor.Property.Bootstrap, which can be used to make
disk images contain their own installation of propellor.
-- Joey Hess <id@joeyh.name> Thu, 20 Apr 2017 00:54:32 -0400
propellor (4.0.2) unstable; urgency=medium
* Apt.mirror can be used to set the preferred apt mirror of a host,
overriding the default CDN. This info is used by
Apt.stdSourcesList and Sbuild.builtFor.
Thanks, Sean Whitton.
* Property.Partition: Update kpartx output parser, as its output format
changed around version 0.6. Both output formats are supported now.
* Fix bug when using setContainerProps with a chroot that prevented
properties added to a chroot that way from being seen when propellor
was running inside the chroot. This affected disk image creation, and
possibly other things that use chroots.
-- Joey Hess <id@joeyh.name> Fri, 24 Mar 2017 14:04:50 -0400
propellor (4.0.1) unstable; urgency=medium
* Fix build with pre-AMP ghc.
* Tor: Restart daemon after installing private key.
* Tor.named, Tor.torPrivKey: Include the new ed25519 public/private key
pair in addition to the old secret_id_key.
-- Joey Hess <id@joeyh.name> Sun, 19 Mar 2017 16:18:11 -0400
propellor (4.0.0) unstable; urgency=medium
* Added Monoid instances for Property and RevertableProperty.
* Removed applyToList. Instead, use mconcat. (API change)
If you had: applyToList accountFor [User "joey", User "root"]
use instead: mconcat (map accountFor [User "joey", User "root"])
* Makefile: Removed "run" target which was default target.
"make" now only builds propellor, does not run it.
Note that propellor 1.0.0 and earlier relied on this target for
the Cron.runPropellor property's cronjob to work, so upgrading
directly from 1.0.0 to 4.0.0 would break that cron job.
* Remove make from propellor's dependency list; it's not used by
propellor any longer.
* Implemented hostChroot, as originally seen in my slides at
Linux.Conf.Au 2017 in January. Now that it's not vaporware, it allows
one Host to build a disk image that has all the properties of another
Host.
* DiskImage building properties used to propagate DNS info out from
the chroot used to build the disk image to the Host. That is no longer
done, since that chroot only exists as a side effect of the disk image
creation and servers will not be running in it.
* The IsInfo types class's propagateInfo function changed to use a
PropagateInfo data type. (API change)
* The action used to satisfy a property changed to Maybe (Propellor Result).
When it is Nothing, propellor knows it can skip displaying the
description of that property. This is mostly useful in the
implementation of mempty. (API change)
* The doNothing property is now simply mempty. The name was retained
because it can be clearer than mempty in some contexts.
* Added Apache.confEnabled.
-- Joey Hess <id@joeyh.name> Wed, 15 Mar 2017 15:46:42 -0400
propellor (3.4.1) unstable; urgency=medium
* Fixed https url to propellor git repository.
-- Joey Hess <id@joeyh.name> Wed, 01 Mar 2017 16:50:05 -0400
propellor (3.4.0) unstable; urgency=medium
* Added ConfigurableValue type class, for values that can be used in a
config file, or to otherwise configure a program.
* The val function converts such values to String.
* Removed fromPort and fromIPAddr (use val instead). (API change)
* Removed several Show instances that were only used for generating
configuration, replacing with ConfigurableValue instances. (API change)
* The github mirror of propellor's git repository has been removed,
since github's terms of service has started imposing unwanted licensing
requirements.
* propellor --init: The option to clone propellor's git repository
used to use the github mirror, and has been changed to use a different
mirror.
-- Joey Hess <id@joeyh.name> Wed, 01 Mar 2017 16:44:20 -0400
propellor (3.3.1) unstable; urgency=medium
* Apt: Removed the mirrors.kernel.org line from stdSourcesList etc.
The mirror CDN has a new implementation that should avoid the problems
with httpredir that made an extra mirror sometimes be needed.
* Switch Debian CDN address to deb.debian.org.
* Tor.hiddenService: Fix bug in torrc's HiddenServicePort configuration.
Thanks, Félix Sipma
-- Joey Hess <id@joeyh.name> Mon, 20 Feb 2017 13:49:26 -0400
propellor (3.3.0) unstable; urgency=medium
* Arch Linux is now supported by Propellor!
Thanks to Zihao Wang for this port.
* Added Propellor.Property.Pacman for Arch's package manager.
Maintained by Zihao Wang.
* The types of some properties changed; eg from Property DebianLike
to Property (DebianLike + ArchLinux). Also, DebianLike and Linux
are no longer type synonyms; propellor now knows that Linux includes
ArchLinux. This could require updates to code, so is a minor API change.
* GHC's fileSystemEncoding is used for all String IO, to avoid
encoding-related crashes in eg, Propellor.Property.File.
* Add --build option to simply build config.hs.
* More informative usage message. Thanks, Daniel Brooks
* Tor.hiddenService' added to support multiple ports.
Thanks, Félix Sipma.
* Apt.noPDiffs added.
Thanks, Sean Whitton.
* stack.yaml: Compile with GHC 8.0.1 against lts-7.16.
Thanks, Andrew Cowie.
* Added Propellor.Property.File.configFileName and related functions
to generate good filenames for config directories.
* Added Apt.suiteAvailablePinned, Apt.pinnedTo.
Thanks, Sean Whitton.
* Added File.containsBlock
Thanks, Sean Whitton.
-- Joey Hess <id@joeyh.name> Tue, 07 Feb 2017 12:09:24 -0400
propellor (3.2.3-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 22 Nov 2016 14:16:29 -0700
propellor (3.2.3) unstable; urgency=medium
* Improve extraction of gpg secret key id list, to work with gpg 2.1.
* The propellor wrapper checks if ./config.hs exists; if so it runs
using the configuration in the current directory, rather than
~/.propellor/config.hs
* Debootstap: Fix too tight permissions lock down of debootstrapped
chroots, which prevented non-root users from doing anything in the
chroot.
-- Joey Hess <id@joeyh.name> Tue, 22 Nov 2016 11:36:18 -0400
propellor (3.2.2-1) unstable; urgency=medium
* Package new upstream release.
* Add two overrides for spelling-error-in-binary in libghc-propellor-dev.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 13 Nov 2016 20:47:44 -0700
propellor (3.2.2) unstable; urgency=medium
* Added Linode.serialGrub property.
* Clean up build warnings about redundant constraints when built with ghc 8.0.
* Added Group.hasUser property. Thanks, Daniel Brooks
-- Joey Hess <id@joeyh.name> Fri, 11 Nov 2016 17:54:44 -0400
propellor (3.2.1-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 08 Oct 2016 08:52:57 -0700
propellor (3.2.1) unstable; urgency=medium
* Simplify Debootstrap.sourceInstall since #770217 was fixed.
* Debootstap.installed: Fix inverted logic that made this never install
debootstrap. Thanks, mithrandi.
-- Joey Hess <id@joeyh.name> Mon, 03 Oct 2016 18:06:31 -0400
propellor (3.2.0-1) unstable; urgency=medium
* Package new upstream release.
* Drop no-upstream-changelog libghc-propellor-doc Lintian override.
Obsoleted by new haskell-devscripts.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 10 Sep 2016 18:55:56 -0700
propellor (3.2.0) unstable; urgency=medium
[ Sean Whitton ]
* Using ccache with Sbuild.built & Sbuild.builtFor is now toggleable: these
properties now take a parameter of type Sbuild.UseCcache. (API Change)
* Sbuild.piupartsConf: no longer takes an Apt.Url. (API Change)
* Sbuild.piupartsConf & Sbuild.piupartsConfFor: does nothing if corresponding
schroot not built.
Previously, these properties built the schroot if it was missing.
* Sbuild.built & Sbuild.piupartsConf: add an additional alias to sid chroots.
This is for compatibility with `dgit sbuild`.
* Further improvements to Sbuild.hs haddock.
[ Joey Hess ]
* Tor.hiddenService: Converted port parameter from Int to Port. (API change)
* Tor.hiddenServiceAvailable: The hidden service hostname file may not
be available immedaitely after configuring tor; avoid ugly error in
this case.
-- Joey Hess <id@joeyh.name> Sat, 10 Sep 2016 11:39:40 -0400
propellor (3.1.2-2) unstable; urgency=medium
* Re-upload including orig.tar
* Update README.source about -v_
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 05 Sep 2016 17:10:44 -0700
propellor (3.1.2-1) unstable; urgency=medium
* Package new upstream release.
* Drop patches obsoleted by upstream changes:
- 0001-remove-README.Debian-from-propellor.cabal.patch
- 0003-fix-ccache-haddock.patch
- 0004-pass-allow-unrelated-histories-to-git-merge.patch.
* Drop some unused lintian overrides.
* Override binary-or-shlib-defines-rpath for -dev package.
Standard libghc override.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 05 Sep 2016 10:24:17 -0700
propellor (3.1.2) unstable; urgency=medium
[ Joey Hess ]
* Ssh.knownHost: Bug fix: Only fix up the owner of the known_hosts
file after it exists.
[ Sean Whitton ]
* Sbuild.keypairInsecurelyGenerated: Improved to be more robust.
* Pass --allow-unrelated-histories to git merge when run with git 2.9 or
newer. This fixes the /usr/bin/propellor wrapper with this version of git.
* Sbuild.built & Sbuild.builtFor no longer require Sbuild.keypairGenerated.
Transition guide: If you are using sbuild 0.70.0 or newer, you should
`rm -r /var/lib/sbuild/apt-keys`. Otherwise, you should add either
Sbuild.keypairGenerated or Sbuild.keypairInsecurelyGenerated to your host.
* Sbuild haddock improvements:
- State that we don't support squeeze and Buntish older than trusty.
This is due to our enhancements, such as eatmydata.
- State that you need sbuild 0.70.0 or newer to build for stretch.
This is due to gpg2 hitting Debian stretch.
- Explain when a keygen is required.
- Update sample ~/.sbuildrc for sbuild 0.71.0.
- Add hint for customising chroots with propellor.
- Update example usage of System type.
-- Joey Hess <id@joeyh.name> Sun, 28 Aug 2016 14:39:23 -0400
propellor (3.1.1) unstable; urgency=medium
* Haddock build fix.
Thanks, Sean Whitton
-- Joey Hess <id@joeyh.name> Thu, 23 Jun 2016 08:12:57 -0400
propellor (3.1.0-2) unstable; urgency=medium
* Add 0004-pass-allow-unrelated-histories-to-git-merge.patch (Closes: #834895)
Thanks to Fred Picca for reporting the problem.
- Tighten dependency on git to >= 1:2.9 for --allow-unrelated-histories
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 20 Aug 2016 08:20:17 -0700
propellor (3.1.0-1) unstable; urgency=medium
* Package new upstream release.
* Add 0002-dpkg-mergechangelogs.patch to facilitate uploading with dgit.
Adding this patch ensures that HEAD matches the unpacked source package.
* Add README.source.
* Add 0003-fix-ccache-haddock.patch.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 23 Jun 2016 18:31:41 +0900
propellor (3.1.0) unstable; urgency=medium
* Architecture changed from String to an ADT. (API Change)
Transition guide: Change "amd64" to X86_64, "i386" to X86_32,
"armel" to ARMEL, etc.
Thanks, Félix Sipma.
* The Debian data type now includes a DebianKernel. (API Change)
This won't affect most config.hs, as osDebian defaults to
Linux. Added osDebian' can be used to specify a different kernel.
Thanks, Félix Sipma.
* Improve exception handling. A property that threw a non-IOException
used to stop the whole propellor run. Now, all non-async exceptions
only make the property that threw them fail. (Implicit API change)
* Added StopPropellorException and stopPropellorMessage which can be
used in the unusual case where a failure of one property should stop
propellor from trying to ensure any other properties.
* tryPropellor returns Either SomeException instead of Either IOException
(API change)
* Switch letsencrypt to certbot package name.
* Sbuild: Add keyringInsecurelyGenerated which is useful on throwaway
build VMs.
Thanks, Sean Whitton
* Added Propellor.Property.SiteSpecific.Exoscale.
Thanks, Sean Whitton
* Property.Reboot: Added toDistroKernel and toKernelNewerThan.
Thanks, Sean Whitton
* Added ConfFile.hasIniSection.
Thanks, Félix Sipma.
* Apt.install: When asked to install a package that apt does not know
about, it used to incorrectly succeed. Now it will fail.
* Property.Firejail: New module.
Thanks, Sean Whitton
* File: Write privdata files in binary rather than text, which avoids
failure when they do not contain valid unicode.
Thanks, Andrew Schurman
* Generalized fileProperty can now operate on a file as either a series
of lines, or a ByteString.
[ Sean Whitton ]
* New info property Schroot.useOverlays to indicate whether you want schroots
set up by propellor to use the Linux kernel's OverlayFS.
* Schroot.overlaysInTmpfs sets Schroot.useOverlays info property.
* If you have indicated that you want schroots to use OverlayFS and the
current kernel does not support it, Sbuild.built will attempt to reboot
into a kernel that does, or fail if it can't find one.
* Sbuild.built will no longer add duplicate `aliases=UNRELEASED,sid...` lines
to more than one schroot config. It will not remove any such lines that the
previous version of propellor added, though.
* Sbuild.keypairGenerated works around Debian bug #792100 by creating the
directory /root/.gnupg in advance.
* Ccache.hasCache now sets the setgid bit on the cache directory, as
ccache requires.
-- Joey Hess <id@joeyh.name> Wed, 22 Jun 2016 15:29:27 -0400
propellor (3.0.5-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Fri, 10 Jun 2016 15:21:47 +0900
propellor (3.0.5) unstable; urgency=medium
* Modules added for Sbuild and Ccache.
Thanks, Sean Whitton
* Systemd: Added killUserProcesses property, which can be reverted
to return systemd to its default behavior before version 230 started
killing processes like screen sessions.
* Systemd: Added logindConfigured property.
-- Joey Hess <id@joeyh.name> Mon, 06 Jun 2016 17:13:21 -0400
propellor (3.0.4-1) unstable; urgency=medium
* Package new upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 24 May 2016 15:34:24 +0900
propellor (3.0.4) unstable; urgency=medium
* Run letsencrypt with --noninteractive.
* Fix build with ghc 8.0.1.
Thanks, davean.
* Module added for the Borg backup system.
Thanks, Félix Sipma.
* Fix build with directory-1.2.6.2.
-- Joey Hess <id@joeyh.name> Sun, 22 May 2016 15:54:49 -0400
propellor (3.0.3-2) unstable; urgency=medium
* Use CDBS & haskell-devscripts to build new binary packages
libghc-propellor-{dev,prof,doc}.
* Add X-Description: field to debian/control.
* Add patch removing README.Debian from propellor.cabal.
* Re-arrange files in debian/ to deal with multiple binary packages.
- Use debian/propellor.manpages and debian/propellor.docs instead of
overrides in debian/rules.
- Add Lintian overrides duplicate-{short,long}-description.
- Rename README.Debian, lintian-overrides to correspond to particular
binary packages.
- Add libghc-propellor-{dev,prof,doc}.links duplicating propellor.links.
* Binary package propellor now depends on libghc-propellor-dev.
This fixes using propellor as a library, as set up by propellor --init
option B. Closes:
https://propellor.branchable.com/todo/propellor_--init_option_B_failure/
* Update Source: field and copyright year in debian/copyright.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 07 May 2016 10:59:53 -0700
propellor (3.0.3-1) unstable; urgency=medium
* Package new upstream release.
* Bump standards version to 3.9.8 (no changes required).
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 01 May 2016 17:12:29 -0700
propellor (3.0.3) unstable; urgency=medium
* Remove Propellor.DotDir from the propellor library, as its use of
Paths_propellor prevents use of the module out of propellor's tree.
This module is only needed for the wrapper program anyway, which
handles --init.
-- Joey Hess <id@joeyh.name> Sun, 01 May 2016 17:51:37 -0400
propellor (3.0.2) unstable; urgency=medium
* Added Apt.periodicUpdates.
Thanks, Félix Sipma.
* Apt.unattendedUpgrades: Enable mailing problem reports to root.
Thanks, Félix Sipma.
* Added Propellor.Property.Fstab, and moved the fstabbed property to there.
* Attic module added for the backup system.
Thanks, Félix Sipma.
* Fix build with directory-1.2.6.2.
-- Joey Hess <id@joeyh.name> Sat, 30 Apr 2016 15:46:50 -0400
propellor (3.0.1-1) unstable; urgency=medium
* Package new upstream release.
* Remove obsolete debian/NEWS to minimise confusion.
-- Sean Whitton <spwhitton@spwhitton.name> Wed, 06 Apr 2016 07:20:20 -0700
propellor (3.0.1) unstable; urgency=medium
* propellor --init now runs cabal sandbox init if cabal has been
configured with require-sandbox: True.
Thanks, Sean Whitton
* Re-bundled concurrent-output so propellor can be deployed to Debian
stable systems without installing it (insecurely) from hackage.
-- Joey Hess <id@joeyh.name> Tue, 05 Apr 2016 13:35:54 -0400
propellor (3.0.0-1) unstable; urgency=medium
* New upstream version.
* Create debian/NEWS to detail a caveat when upgrading to this new version.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 03 Apr 2016 11:35:35 -0700
propellor (3.0.0) unstable; urgency=medium
* Property types have been improved to indicate what systems they target.
This prevents using eg, Property FreeBSD on a Debian system.
Transition guide for this sweeping API change:
- First, upgrade to propellor 2.17.2 and deploy that to all your hosts.
Otherwise, propellor --spin will fail when you upgrade to
propellor 3.0.0.
- Change "host name & foo & bar"
to "host name $ props & foo & bar"
- Similarly, `propertyList` and `combineProperties` need `props`
to be used to combine together properties; they no longer accept
lists of properties. (If you have such a list, use `toProps`.)
- And similarly, Chroot, Docker, and Systemd container need `props`
to be used to combine together the properies used inside them.
- The `os` property is removed. Instead use `osDebian`, `osBuntish`,
or `osFreeBSD`. These tell the type checker the target OS of a host.
- Change "Property NoInfo" to "Property UnixLike"
- Change "Property HasInfo" to "Property (HasInfo + UnixLike)"
- Change "RevertableProperty NoInfo" to
"RevertableProperty UnixLike UnixLike"
- Change "RevertableProperty HasInfo" to
"RevertableProperty (HasInfo + UnixLike) UnixLike"
- GHC needs {-# LANGUAGE TypeOperators #-} to use these fancy types.
This is enabled by default for all modules in propellor.cabal. But
if you are using propellor as a library, you may need to enable it
manually.
- If you know a property only works on a particular OS, like Debian
or FreeBSD, use that instead of "UnixLike". For example:
"Property Debian"
- It's also possible make a property support a set of OS's, for example:
"Property (Debian + FreeBSD)"
- Removed `infoProperty` and `simpleProperty` constructors, instead use
`property` to construct a Property.
- Due to the polymorphic type returned by `property`, additional type
signatures tend to be needed when using it. For example, this will
fail to type check, because the type checker cannot guess what type
you intend the intermediate property "go" to have:
foo :: Property UnixLike
foo = go `requires` bar
where
go = property "foo" (return NoChange)
To fix, specify the type of go:
go :: Property UnixLike
- `ensureProperty` now needs to be passed a witness to the type of the
property it's used in.
change this: foo = property desc $ ... ensureProperty bar
to this: foo = property' desc $ \w -> ... ensureProperty w bar
- General purpose properties like cmdProperty have type "Property UnixLike".
When using that to run a command only available on Debian, you can
tighten the type to only the OS that your more specific property works on.
For example:
upgraded :: Property Debian
upgraded = tightenTargets (cmdProperty "apt-get" ["upgrade"])
- Several utility functions have been renamed:
getInfo to fromInfo
propertyInfo to getInfo
propertyDesc to getDesc
propertyChildren to getChildren
* The new `pickOS` property combinator can be used to combine different
properties, supporting different OS's, into one Property that chooses
which to use based on the Host's OS.
* Re-enabled -O0 in propellor.cabal to reign in ghc's memory use handling
these complex new types.
* Added dependency on concurrent-output; removed embedded copy.
* Apt.PPA: New module, contributed by Evan Cofsky.
* Improved propellor's first run experience; propellor --init will
walk the user through setting up ~/.propellor, with a choice between
a clone of propellor's git repository, or a minimal config, and will
configure propellor to use a gpg key.
* Stack support. "git config propellor.buildsystem stack" will make
propellor build its config using stack. (This does not affect
how propellor is bootstrapped on a host by "propellor --spin host".)
* When propellor is installed using stack, propellor --init will
automatically set propellor.buildsystem=stack.
-- Joey Hess <id@joeyh.name> Sat, 02 Apr 2016 15:33:26 -0400
propellor (2.17.2-1) unstable; urgency=low
* New upstream version.
-- Sean Whitton <spwhitton@spwhitton.name> Thu, 31 Mar 2016 17:26:19 -0700
propellor (2.17.2) unstable; urgency=medium
* When new dependencies are added to propellor or the propellor config,
try harder to get them installed. In particular, this makes
propellor --spin work when the remote host needs to get dependencies
installed in order to build the updated config.
* Apt.update: Also run dpkg --configure -a here as apt for some reason
won't even update if dpkg was interrupted.
-- Joey Hess <id@joeyh.name> Wed, 30 Mar 2016 15:45:08 -0400
propellor (2.17.1-1) unstable; urgency=medium
* New upstream version.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 29 Mar 2016 08:30:00 -0700
propellor (2.17.1) unstable; urgency=medium
* Avoid generating excessively long paths to the unix socket file
used for ssh connection caching. Mostly. Can still generate a too long
one if $HOME is longer than 60 bytes.
* Uwsgi: add ".ini" extension to app config files.
Files without extensions were ignored by uwsgi.
Thanks, Félix Sipma.
-- Joey Hess <id@joeyh.name> Mon, 28 Mar 2016 11:06:34 -0400
propellor (2.17.0) unstable; urgency=medium
* Added initial support for FreeBSD.
Thanks, Evan Cofsky.
* Added Propellor.Property.ZFS.
Thanks, Evan Cofsky.
* Firewall: Reorganized Chain data type. (API change)
Thanks, Félix Sipma.
* Firewall: Separated Table and Target (API change)
Thanks, Félix Sipma.
* Ssh: change type of listenPort from Int to Port (API change)
Thanks, Félix Sipma.
* Firewall: add TCPFlag, Frequency, TCPSyn, ICMPTypeMatch, NatDestination
Thanks, Félix Sipma.
* Network: Filter out characters not allowed in interfaces.d files.
Thanks, Félix Sipma.
* Apt.upgrade: Run dpkg --configure -a first, to recover from
interrupted upgrades.
* Apt: Add safeupgrade.
* Force ssh, scp, and git commands to be run in the foreground.
Should fix intermittent hangs of propellor --spin.
* Avoid repeated re-building on systems such as FreeBSD where building
re-links the binary even when there are no changes.
* Locale.available: Run locale-gen, instead of dpkg-reconfigure locales,
which modified the locale.gen file and sometimes caused the property to
need to make changes every time.
* Speed up propellor's build of itself, by asking cabal to only build
the propellor-config binary and not all the libraries.
* Tor.named: Fix bug that sometimes caused the property to fail the first
time, though retrying succeeded.
-- Joey Hess <id@joeyh.name> Thu, 24 Mar 2016 14:53:31 -0400
propellor (2.16.0-1) unstable; urgency=medium
* New upstream version.
* Create changelog symlink with dh_link instead of in debian/rules.
In accordance with policy 12.3: a package cannot assume the existence of
/usr/share/doc.
* Bump standards version to 3.9.7 (no changes required).
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 28 Feb 2016 17:02:24 -0700
propellor (2.16.0) unstable; urgency=medium
* Obnam: Only let one backup job run at a time when a host has multiple
different backup properties, to avoid concurrent jobs fighting over
scarce resources (particularly memory). Other jobs block on a lock
file.
* Removed references to a Debian derivative from code and documentation
because of an unfortunate trademark use policy.
http://joeyh.name/blog/entry/trademark_nonsense/
* That included changing a data constructor to "Buntish", an API change.
* Firewall.rule: Now takes a Table parameter. (API change)
* Firewall: add InIFace/OutIFace Rules, add Source/Destination Rules,
add CustomTarget, and more improvements.
Thanks, Félix Sipma.
* Ssh.authorizedKey: Fix bug preventing it from working when the
authorized_keys file does not yet exist.
* Removed Ssh.unauthorizedKey and made Ssh.authorizedKey revertable.
(API change)
-- Joey Hess <id@joeyh.name> Sat, 27 Feb 2016 13:31:57 -0400
propellor (2.15.4-1) unstable; urgency=medium
* New upstream version.
-- Sean Whitton <spwhitton@spwhitton.name> Sat, 13 Feb 2016 11:52:53 -0700
propellor (2.15.4) unstable; urgency=medium
* Build /usr/src/propellor/propellor.git reproducibly,
which makes the whole Debian package build reproducibly.
Thanks, Sean Whitton.
* Obnam: To cause old generations to be forgotten, keepParam can be
passed to a backup property; this causes obnam forget to be run.
* Delete /etc/apt/apt.conf.d/50unattended-upgrades.ucf-dist when
unattended-upgrades is installed, to work around #812380 which results
in many warnings from apt, including in cron mails.
* Added Propellor.Property.LetsEncrypt
* Apache.httpsVirtualHost: New property, setting up a https vhost
with the certificate automatically obtained using letsencrypt.
* Allow using combineProperties and propertyList with lists of
RevertableProperty.
-- Joey Hess <id@joeyh.name> Thu, 11 Feb 2016 12:49:10 -0400
propellor (2.15.3-1) unstable; urgency=medium
* New upstream version.
* Fix override of Lintian tag debian-watch-may-check-gpg-signature.
-- Sean Whitton <spwhitton@spwhitton.name> Tue, 12 Jan 2016 19:41:07 -0700
propellor (2.15.3) unstable; urgency=medium
* Added Git.bareRepoDefaultBranch property
Thanks, Sean Whitton.
* Add missing Control.Applicative imports needed by older versions of ghc.
-- Joey Hess <id@joeyh.name> Tue, 12 Jan 2016 12:37:22 -0400
propellor (2.15.2-1) unstable; urgency=medium
* New upstream version.
* Fix duplicate Section: in debian/control file.
-- Sean Whitton <spwhitton@spwhitton.name> Mon, 04 Jan 2016 12:14:47 +0000
propellor (2.15.2) unstable; urgency=medium
* Added GNUPGBIN environment variable or git.program git config
to control the command run for gpg. Allows eg, GNUPGBIN=gpg2
Thanks, Félix Sipma.
* Bootstrap apt-get installs run with deconf noninteractive frontend.
* spin --via: Avoid committing on relay host.
* Postfix: Add service property to enable/disable services in master.cf.
* Added Munin module, contributed by Jelmer Vernooij.
-- Joey Hess <id@joeyh.name> Sun, 03 Jan 2016 16:56:26 -0400
propellor (2.15.1-1) unstable; urgency=medium
* New upstream version.
* Add watch file.
* Fix specification of packaging branch in Vcs-Git: variable.
* Silence xargs during package build when hothasktags is not installed.
Patch accepted upstream for next upstream release.
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 03 Jan 2016 17:05:27 +0000
propellor (2.15.1) unstable; urgency=medium
* Added git configs propellor.spin-branch and propellor.forbid-dirty-spin.
Thanks, Sean Whitton.
* Added User.systemAccountFor and User.systemAccountFor' properties.
Thanks, Félix Sipma.
* Gpg.keyImported converted to not use a flag file and instead check
if gpg has the provided key already.
Thanks, Félix Sipma.
* Clean build with ghc 7.10.
* Merged Utility changes from git-annex.
-- Joey Hess <id@joeyh.name> Sat, 19 Dec 2015 16:43:09 -0400
propellor (2.15.0-1) unstable; urgency=medium
* Adopt propellor package (Closes: #768634).
* Switch dpkg-source format to 3.0 (quilt).
-- Sean Whitton <spwhitton@spwhitton.name> Sun, 13 Dec 2015 11:33:02 -0700
propellor (2.15.0) unstable; urgency=medium
* Added UncheckedProperty type, along with unchecked to indicate a
Property needs its result checked, and checkResult and changesFile
to check for changes.
* Properties that run an arbitrary command, such as cmdProperty
and scriptProperty are converted to use UncheckedProperty, since
they cannot tell on their own if the command truely made a change or not.
(API Change)
Transition guide:
- When GHC complains about an UncheckedProperty, add:
`assume` MadeChange
(Since these properties used to always return MadeChange, that
change is always safe to make.)
- Or, if you know that the command should modifiy a file, use:
`changesFile` filename
* The `trivial` combinator has been removed. (API change)
Instead, use:
`assume` NoChange
Or, better, use changesFile or checkResult to accurately report
when a property makes a change.
* A few properties have had their Result improved, for example
Apt.buldDep and Apt.autoRemove now check if a change was made or not.
* User.hasDesktopGroups changed to avoid trying to add the user to
groups that don't exist.
* Added Postfix.saslPasswdSet.
* Added Propellor.Property.Locale.
Thanks, Sean Whitton.
* Added Propellor.Property.Fail2Ban.
-- Joey Hess <id@joeyh.name> Sun, 06 Dec 2015 15:33:51 -0400
propellor (2.14.0) unstable; urgency=medium
* Add Propellor.Property.PropellorRepo.hasOriginUrl, an explicit way to
set the git repository url normally implicitly set when using --spin.
* Added Chroot.noServices property.
* DiskImage creation automatically uses Chroot.noServices.
* Removed the (unused) dependency on quickcheck.
* DebianMirror: Added a DebianMirror type for configuration (API change)
Thanks, Félix Sipma.
* DebianMirror: Add RsyncExtra to configuration.
Thanks, Félix Sipma.
* Added Git.repoConfigured and Git.repoAcceptsNonFFs properties.
Thanks, Sean Whitton
* Added User.hasDesktopGroups property.
-- Joey Hess <id@joeyh.name> Tue, 24 Nov 2015 16:03:55 -0400
propellor (2.13.0) unstable; urgency=medium
* RevertableProperty used to be assumed to contain info, but this is
now made explicit, with RevertableProperty HasInfo or
RevertableProperty NoInfo. (API change)
Transition guide:
- If you define a RevertableProperty, expect some type check
failures like: "Expecting one more argument to ‘RevertableProperty’".
- Change it to "RevertableProperty NoInfo"
- The compiler will then tell you if it needs "HasInfo" instead.
- If you have code that uses the RevertableProperty constructor
that fails to type check, use the more powerful <!> operator
instead to create the RevertableProperty.
* Various property combinators that combined a RevertableProperty
with a non-revertable property used to yield a RevertableProperty.
This was a bug, because the combined property could not be fully
reverted in many cases, and the result is now a non-revertable property.
* combineWith now takes an additional parameter to control how revert
actions are combined (API change).
* Added Propellor.Property.Concurrent for concurrent properties.
* Made the execProcess exported by propellor, and everything built on it,
avoid scrambled output when run concurrently.
* Propellor now depends on STM and text.
* The cabal file now builds propellor with -O. While -O0 makes ghc
take less memory while building propellor, it can lead to bad memory
usage at runtime due to eg, disabled stream fusion.
* Add File.isCopyOf. Thanks, Per Olofsson.
-- Joey Hess <id@joeyh.name> Sun, 08 Nov 2015 14:51:15 -0400
propellor (2.12.0) unstable; urgency=medium
* The DiskImage module can now make bootable images using grub.
* Add a ChrootTarball chroot type, for using pre-built tarballs
as chroots. Thanks, Ben Boeckel.
* HostName: Improve domain extraction code.
* Added Mount.fstabbed property to generate /etc/fstab to replicate
current mounts.
* HostName: Improve domain extraction code.
* Add File.basedOn. Thanks, Per Olofsson.
* Changed how the operating system is provided to Chroot (API change).
Where before debootstrapped and bootstrapped took a System parameter,
the os property should now be added to the Chroot.
* Follow-on change to Systemd.container, which now takes a System parameter.
* Generalized Property.check so it can be used with Propellor actions as
well as IO actions.
* Hostname.sane and Hostname.setTo can now safely be used as a property
of a chroot, and won't affect the hostname of the host system.
-- Joey Hess <id@joeyh.name> Fri, 23 Oct 2015 17:38:32 -0400
propellor (2.11.0) unstable; urgency=medium
* Rewrote Propellor.Property.ControlHeir one more time, renaming it to
Propellor.Property.Conductor.
* Added Ssh properties to remove authorized_keys and known_hosts lines.
-- Joey Hess <id@joeyh.name> Wed, 21 Oct 2015 19:49:00 -0400
propellor (2.10.0) unstable; urgency=medium
* The Propellor.Property.Spin added in the last release is replaced
with a very different Propellor.Property.ControlHeir.
-- Joey Hess <id@joeyh.name> Tue, 20 Oct 2015 21:29:12 -0400
propellor (2.9.0) unstable; urgency=medium
* Added basic Uwsgi module, maintained by Félix Sipma.
* Add Apt.hasForeignArch. Thanks, Per Olofsson.
* Improved documentation, particularly of the Propellor module.
* The Propellor module no longer exports many of the things it used to,
being now focused on only what's needed to write config.hs.
Use Propellor.Base to get all the things exported by Propellor before.
(API change)
* Some renaming of instance methods, and moving of functions to more
appropriate modules. (API change)
* Added File.isSymlinkedTo. Thanks, Per Olofsson.
* fileProperty, and properties derived from it now write the new
file content via origfile.propellor-new~, instead of to a randomly named
temp file. This allows them to clean up any temp file that may have
been left by an interrupted run of propellor.
* Added Propellor.Property.Spin, which can be used to make a host be a
controller of other hosts, which will automatically spin them each time
propellor is run.
* Ssh.keyImported is replaced with Ssh.userKeys. (API change)
The new property only gets the private key from the privdata; the
public key is provided as a parameter, and so is available as
Info that other properties can use.
* Ssh.keyImported' is renamed to Ssh.userKeyAt, and also changed
to only import the private key from the privdata. (API change)
* While Ssh.keyImported and Ssh.keyImported' avoided updating existing
keys, the new Ssh.userKeys and Ssh.userKeyAt properties will
always update out of date key files.
* Ssh.pubKey renamed to Ssh.hostPubKey. (API change)
* Added --unset-unused
* Fix typo: propigate → propagate. Thanks, Felix Gruber.
(A minor API change)
* Chroot: Converted to use a ChrootBootstrapper type class, so
other ways to bootstrap chroots can easily be added in separate
modules. (API change)
-- Joey Hess <id@joeyh.name> Tue, 20 Oct 2015 15:43:12 -0400
propellor (2.8.1) unstable; urgency=medium
* Guard against power loss etc when building propellor, by updating
the executable atomically.
* Added Logcheck module, contributed by Jelmer Vernooij.
* Added Kerberos module, contributed by Jelmer Vernooij.
* Privdata that uses HostContext inside a container will now have the
name of the container as its context, rather than the name of
the host(s) where the container is used. This allows eg, having different
passwords for a user in different containers. Note that previously,
propellor would prompt using the container name as the context, but
not actually use privdata using that context; so this is a bug fix.
* Fix --add-key to not fail committing when no privdata file exists yet.
-- Joey Hess <id@joeyh.name> Sun, 04 Oct 2015 13:54:59 -0400
propellor (2.8.0) unstable; urgency=medium
* Added Propellor.Property.Rsync.
* Convert Info to use Data.Dynamic, so properties can export and consume
info of any type that is Typeable and a Monoid, including data types
private to a module. (API change)
Thanks to Joachim Breitner for the idea.
* Improve propellor wrapper to better handle installation cloning
the public propellor repo, by setting that repo to be upstream,
so propellor doesnt try to push to a read-only repo.
* Added DebianMirror module, contributed by Félix Sipma.
* Some hlint cleanups.
Thanks, Mario Lang
* Added Propellor.Property.Unbound for the caching DNS server.
Thanks, Félix Sipma.
* Added PTR to Dns.Record. While this is ignored by
Propellor.Property.Dns for now, since reverse DNS setup is not
implemented there yet, it can be used in other places, eg Unbound.
Thanks, Félix Sipma.
* PrivData converted to newtype (API change).
* Stopped stripping trailing newlines when setting PrivData;
this was previously done to avoid mistakes when pasting eg passwords
with an unwanted newline. Instead, PrivData consumers should use either
privDataLines or privDataVal, to extract respectively lines or a
value (without internal newlines) from PrivData.
* Allow storing arbitrary ByteStrings in PrivData, extracted using
privDataByteString.
* Added Aiccu module, contributed by Jelmer Vernooij.
* Added --rm-key.
-- Joey Hess <id@joeyh.name> Tue, 22 Sep 2015 19:35:07 -0400
propellor (2.7.3) unstable; urgency=medium
* Fix bug that caused provisioning new chroots to fail.
* Update for Debian systemd-container package split.
* Added Propellor.Property.Parted, for disk partitioning.
* Added Propellor.Property.Partition, for partition formatting etc.
* Added Propellor.Property.DiskImage, for bootable disk image creation.
(Experimental and not yet complete.)
* Dropped support for ghc 7.4.
-- Joey Hess <id@joeyh.name> Thu, 03 Sep 2015 08:52:51 -0700
propellor (2.7.2) unstable; urgency=medium
* Added Propellor.Property.ConfFile, with support for Windows-style .ini
files, and generic support for files containing some sort of sections.
Thanks, Sean Whitton for completing the implementation.
* Added Propellor.Property.LightDM
Thanks, Sean Whitton.
* Multiple Tor.hiddenService properties can now be defined for a host;
previously only one such property worked per host.
Thanks, Félix Sipma.
-- Joey Hess <id@joeyh.name> Tue, 25 Aug 2015 12:00:25 -0700
propellor (2.7.1) unstable; urgency=medium
* Make sure that make is installed when bootstrapping propellor.
* Fix bug in Firewall's Port datatype to iptable parameter translation code.
Thanks, Antoine Eiche.
-- Joey Hess <id@joeyh.name> Fri, 14 Aug 2015 15:01:37 -0400
propellor (2.7.0) unstable; urgency=medium
* Ssh.permitRootLogin type changed to allow configuring WithoutPassword
and ForcedCommandsOnly (API change)
* setSshdConfig type changed, and setSshdConfigBool added with old type.
* Fix a bug in shim generation code for docker and chroots, that
sometimes prevented deployment of docker containers.
* Added onChangeFlagOnFail which is often a safer alternative to
onChange.
Thanks, Antoine Eiche.
* Work around broken git pull option parser in git 2.5.0,
which broke use of --upload-pack to send a git push when running
propellor --spin.
-- Joey Hess <id@joeyh.name> Thu, 30 Jul 2015 12:05:46 -0400
propellor (2.6.0) unstable; urgency=medium
* Replace String type synonym Docker.Image by a data type
which allows to specify an image name and an optional tag. (API change)
Thanks, Antoine Eiche.
* Added --unset to delete a privdata field.
* Version dependency on exceptions.
* Systemd: Add masked property.
Thanks, Sean Whitton
* Fix make install target to work even when git is not configured.
-- Joey Hess <id@joeyh.name> Fri, 10 Jul 2015 22:36:29 -0400
propellor (2.5.0) unstable; urgency=medium
* cmdProperty' renamed to cmdPropertyEnv to make way for a new,
more generic cmdProperty' (API change)
* Add docker image related properties.
Thanks, Antoine Eiche.
* Export CommandParam, boolSystem, safeSystem, shellEscape, and
createProcess from Propellor.Property.Cmd, so they are available
for use in constricting your own Properties when using propellor
as a library.
* Improve enter-machine scripts for systemd-nspawn containers to unset most
environment variables.
* Fix Postfix.satellite bug; the default relayhost was set to the
domain, not to smtp.domain as documented.
* Mount /proc inside a chroot before provisioning it, to work around #787227
* --spin now works when given a short hostname that only resolves to an
ipv6 address.
* Added publish property for systemd-spawn containers, for port publishing.
(Needs systemd version 220.)
* Added bind and bindRo properties for systemd-spawn containers.
* Firewall: Port was changed to a newtype, and the Port and PortRange
constructors of Rules were changed to DPort and DportRange, respectively.
(API change)
* Docker: volume and publish accept Bound FilePath and Bound Port,
respectively. They also continue to accept Strings, for backwards
compatibility.
* Docker: Added environment property.
Thanks Antoine Eiche.
-- Joey Hess <id@joeyh.name> Tue, 09 Jun 2015 17:08:43 -0400
propellor (2.4.0) unstable; urgency=medium
* Propellor no longer supports Debian wheezy (oldstable).
* Git.bareRepo: Fix bug in calls to userScriptProperty.
Thanks, Jelmer Vernooij.
* Removed Obnam.latestVersion which was only needed for Debian wheezy
backport.
* Merged Utility changes from git-annex.
* Switched from MonadCatchIO-transformers to the newer transformers and
exceptions libraries.
* Ensure build deps are installed before building propellor in --spin
and cron job, even if propellor was already built before, to deal with
upgrades that add new dependencies.
-- Joey Hess <id@joeyh.name> Wed, 06 May 2015 14:28:59 -0400
propellor (2.3.0) unstable; urgency=medium
* Make propellor resistent to changes to shared libraries, such as libffi,
which might render the propellor binary unable to run. This is dealt with
by checking the binary both when running propellor on a remote host,
and by Cron.runPropellor. If the binary doesn't work, it will be rebuilt.
* Note that since a new switch had to be added to allow testing the binary,
upgrading to this version will cause a rebuild from scratch of propellor.
* Added hasLoginShell and shellEnabled.
* debCdn changed to new httpredir.debian.org official replacement for
http.debian.net.
* API change: Added User and Group newtypes, and Properties that
used to use the type UserName = String were changed to use them.
-- Joey Hess <id@joeyh.name> Wed, 22 Apr 2015 13:46:24 -0400
propellor (2.2.1) unstable; urgency=medium
* userScriptProperty now passes --shell /bin/sh, so it can be used
even for users with nonstandard shells.
* Fix bug in docker propellor shim setup introduced in last release,
which broke provisioning of new docker containers.
-- Joey Hess <id@joeyh.name> Thu, 12 Mar 2015 20:08:34 -0400
propellor (2.2.0) unstable; urgency=medium
* When running shimmed (eg in a docker container),
improve process name visible in ps.
* Add shebang to cron.daily etc files.
* Some changes to tor configuration, minor API change.
* Propellor now builds itself, and gets its build dependencies installed
when deploying to a new host, without needing the Makefile.
-- Joey Hess <id@joeyh.name> Mon, 09 Mar 2015 12:02:31 -0400
propellor (2.1.0) unstable; urgency=medium
* Additional tor properties, including support for making relays,
and naming bridges, relays, etc.
* New Cron.Times data type, which allows Cron.job to install
daily/monthly/weekly jobs that anacron can run. (API change)
* Fix Git.daemonRunning to restart inetd after enabling the git server.
* Ssh.authorizedKey: Make the authorized_keys file and .ssh directory
be owned by the user, not root.
* Ssh.knownHost: Make the .ssh directory be owned by the user, not root.
-- Joey Hess <id@joeyh.name> Thu, 12 Feb 2015 12:36:26 -0400
propellor (2.0.0) unstable; urgency=medium
* Property has been converted to a GADT, and will be Property NoInfo
or Property HasInfo.
This was done to make sure that ensureProperty is only used on
properties that do not have Info.
Transition guide:
- Change all "Property" to "Property NoInfo" or "Property HasInfo"
(The compiler can tell you if you got it wrong!)
- To construct a RevertableProperty, it is useful to use the new
(<!>) operator
- Constructing a list of properties can be problimatic, since
Property NoInto and Property HasInfo are different types and cannot
appear in the same list. To deal with this, "props" has been added,
and can built up a list of properties of different types,
using the same (&) and (!) operators that are used to build
up a host's properties.
* Add descriptions of how to set missing fields to --list-fields output.
* Properties now form a tree, instead of the flat list used before.
This includes the properties used inside a container.
* Fix info propagation from fallback combinator's second Property.
* Added systemd configuration properties.
* Added journald configuration properties.
* Added more network interface configuration properties.
* Implemented OS.preserveNetwork.
-- Joey Hess <id@joeyh.name> Sun, 25 Jan 2015 15:23:08 -0400
propellor (1.3.2) unstable; urgency=medium
* SSHFP records are also generated for CNAMES of hosts.
* Merge Utiity modules from git-annex.
* Ignore bogus DNS when spinning the local host.
-- Joey Hess <id@joeyh.name> Thu, 15 Jan 2015 14:02:07 -0400
propellor (1.3.1) unstable; urgency=medium
* Fix bug that prevented deploying ssh host keys when the file for the
key didn't already exist.
* DNS records for hosts with known ssh public keys now automatically
include SSHFP records.
-- Joey Hess <id@joeyh.name> Sun, 04 Jan 2015 19:51:34 -0400
propellor (1.3.0) unstable; urgency=medium
* --spin checks if the DNS matches any configured IP address property
of the host, and if not, sshes to the host by IP address.
* Detect #774376 and refuse to use docker if the system is so broken
that docker exec doesn't enter a chroot.
* Update intermediary propellor in --spin --via
* Added support for DNSSEC.
* Ssh.hostKey and Ssh.hostKeys no longer install public keys from
the privdata. Instead, the public keys are included in the
configuration. (API change)
* Ssh.hostKeys now removes any host keys of types that the host is not
configured to have.
* sshPubKey is renamed to Ssh.pubKey, and has an added SshKeyType
parameter. (API change)
* CloudAtCost.deCruft no longer forces randomHostKeys.
* Fix build with process 1.2.1.0.
-- Joey Hess <id@joeyh.name> Sun, 04 Jan 2015 17:17:44 -0400
propellor (1.2.2) unstable; urgency=medium
* Revert ensureProperty warning message, too many false positives in places
where Info is correctly propagated. Better approach needed.
-- Joey Hess <id@joeyh.name> Sun, 21 Dec 2014 21:41:11 -0400
propellor (1.2.1) unstable; urgency=medium
* Added CryptPassword to PrivDataField, for password hashes as produced
by crypt(3).
* User.hasPassword and User.hasSomePassword will now use either
a CryptPassword or a Password from privdata, depending on which is set.
-- Joey Hess <id@joeyh.name> Wed, 17 Dec 2014 16:30:44 -0400
propellor (1.2.0) unstable; urgency=medium
* Display a warning when ensureProperty is used on a property which has
Info and is so prevented from propigating it.
* Removed boolProperty; instead the new toResult can be used. (API change)
* Include Propellor.Property.OS, which was accidentially left out of the
cabal file in the last release.
* Fix Apache.siteEnabled to update the config file and reload apache when
configuration has changed.
-- Joey Hess <id@joeyh.name> Tue, 09 Dec 2014 00:05:09 -0400
propellor (1.1.0) unstable; urgency=medium
* --spin target --via relay causes propellor to bounce through an
intermediate relay host, which handles any necessary uploads
when provisioning the target host.
* --spin can be passed multiple hosts, and it will provision each host
in turn.
* Add --merge, to combine multiple --spin commits into a single, more useful
commit.
* Hostname parameters not containing dots are looked up in the DNS to
find the full hostname.
* propellor --spin can now deploy propellor to hosts that do not have
git, ghc, or apt-get. This is accomplished by uploading a fairly
portable precompiled tarball of propellor.
* Propellor.Property.OS contains properties that can be used to do a clean
reinstall of the OS of an existing host. This can be used, for example,
to do an in-place conversion from Fedora to Debian.
This is experimental; use with caution!
* Added group-related properties. Thanks, Félix Sipma.
* Added Git.barerepo. Thanks, Félix Sipma.
* Added Grub.installed and Grub.boots properties.
* New HostContext can be specified when a PrivData value varies per host.
* hasSomePassword and hasPassword now default to using HostContext.
To specify a different context, use hasSomePassword' and
hasPassword' (API change)
* hasSomePassword and hasPassword now make sure shadow passwords are enabled.
* cron.runPropellor now runs propellor, rather than using its Makefile.
This is more robust.
* propellor.debug can be set in the git config to enable more persistent
debugging output.
* Run apt-cache policy with LANG=C so it works on other locales.
* endAction can be used to register an action to run once propellor
has successfully run on a host.
-- Joey Hess <id@joeyh.name> Sun, 07 Dec 2014 15:23:59 -0400
propellor (1.0.0) unstable; urgency=medium
* propellor --spin can now be used to update remote hosts, without
any central git repository needed. The central git repository is
still useful for running propellor from cron, but this simplifies
getting started with propellor, and allows for more ad-hoc usage.
* The git repo url, if any, is updated whenever propellor --spin is used.
* Added prosody module, contributed by Félix Sipma.
* Can be used to configure tor hidden services. Thanks, Félix Sipma.
* When multiple gpg keys are added, ensure that the privdata file
can be decrypted by all of them.
* Convert GpgKeyId to newtype. (API change)
* DigitalOcean.distroKernel property now reboots into the distribution
kernel when necessary.
* Avoid outputting color setting sequences when not run on a terminal.
* Docker code simplified by using `docker exec`; needs docker 1.3.1.
* Docker containers are now a separate data type, cannot be included
in the main host list, and are instead passed to
Docker.docked. (API change)
* Added support for using debootstrap from propellor.
* Propellor can now be used to provision chroots.
* systemd-nspawn containers can now be managed by propellor, very similar
to its handling of docker containers.
* Debian package will be maintained by Gergely Nagy.
-- Joey Hess <id@joeyh.name> Fri, 21 Nov 2014 20:58:02 -0400
propellor (0.9.2) unstable; urgency=medium
* Added nginx module, contributed by Félix Sipma.
* Added firewall module, contributed by Arnaud Bailly.
* Apache: Fix daemon reload when enabling a new module or site.
* Docker: Stop using docker.io; that was a compat symlink in
the Debian package which has been removed in docker.io 1.3.1~dfsg1-2.
Closes: #769452
* Orphaned the Debian package, as I am retiring from Debian.
-- Joey Hess <joeyh@debian.org> Sat, 08 Nov 2014 15:57:36 -0400
propellor (0.9.1) unstable; urgency=medium
* Docker: Add ability to control when containers restart.
* Docker: Default to always restarting containers, so they come back
up after reboots and docker daemon upgrades. (API change)
* Fix loop when a docker host that does not exist was docked.
-- Joey Hess <joeyh@debian.org> Fri, 24 Oct 2014 09:57:31 -0400
propellor (0.9.0) unstable; urgency=medium
* Avoid encoding the current stable suite in propellor's code,
since that poses a difficult transition around the release,
and can easily be wrong if an older version of propellor is used.
Instead, the os property for a stable system includes the suite name
to use, eg Stable "wheezy".
* stdSourcesList uses the stable suite name, to avoid unwanted
immediate upgrades to the next stable release. (API change)
* debCdn switched from cdn.debian.net to http.debian.net, which seems to be
better managed now.
* Docker: Avoid committing container every time it's started up.
-- Joey Hess <joeyh@debian.org> Fri, 10 Oct 2014 11:37:45 -0400
propellor (0.8.3) unstable; urgency=medium
* The Debian package now includes a single-revision git repository in
/usr/src/propellor/, and ~/.propellor/ is set up to use this repository as
its origin remote. This avoids relying on the security of the github
repository when using the Debian package.
* The /usr/bin/propellor wrapper will warn when ~/.propellor/ is out of date
and a newer version is available, after which git merge upstream/master
can be run to merge it.
* Included the config.hs symlink to config-simple.hs in the cabal and Debian
packages.
-- Joey Hess <joeyh@debian.org> Fri, 22 Aug 2014 13:02:01 -0400
propellor (0.8.2) unstable; urgency=medium
* Fix bug in File.containsLines that caused lines that were already in the
file to sometimes be appended to the end.
* Hostname.sane also configures /etc/mailname.
* Fixed Postfix.satellite to really configure relayhost = smtp.domain.
* Avoid reconfiguring postfix unncessarily when it already has a relayhost.
* Deal with apache 2.4's change in the name of site-available config files.
* Hostname aliases can now be used in several places, including --spin
and Ssh.knownHost.
-- Joey Hess <joeyh@debian.org> Mon, 04 Aug 2014 01:12:19 -0400
propellor (0.8.1) unstable; urgency=medium
* Run apt-get update in initial bootstrap.
* --list-fields now includes a table of fields that are not currently set,
but would be used if they got set.
* Remove .gitignore from cabal file list, to avoid build failure on Debian.
Closes: #754334
-- Joey Hess <joeyh@debian.org> Wed, 09 Jul 2014 22:11:31 -0400
propellor (0.8.0) unstable; urgency=medium
* Completely reworked privdata storage. There is now a single file,
and each host is sent only the privdata that its Properties actually use.
To transition existing privdata, run propellor against a host and
watch out for the red failure messages, and run the suggested commands
to store the privdata using the new storage scheme. You may find
it useful to run the old version of propellor to extract data from the old
privdata files during this migration.
Several properties that use privdata now require a context to be
specified. If in doubt, you can use anyContext, or
Context "hostname.example.com"
* Add --edit to edit a privdata value in $EDITOR.
* Add --list-fields to list all currently set privdata fields, along with
the hosts that use them.
* Fix randomHostKeys property to run openssh-server's postinst in a
non-failing way.
* Hostname.sane now cleans up the 127.0.0.1 localhost line in /etc/hosts,
to avoid eg, apache complaining "Could not reliably determine the
server's fully qualified domain name".
-- Joey Hess <joeyh@debian.org> Sun, 06 Jul 2014 18:28:08 -0400
propellor (0.7.0) unstable; urgency=medium
* combineProperties no longer stops when a property fails; now it continues
trying to satisfy all properties on the list before propigating the
failure.
* Attr is renamed to Info. (API change)
* Renamed wrapper to propellor to make cabal installation of propellor work.
* When git gpg signature of a fetched git branch cannot be verified,
propellor will now continue running, but without merging in that branch.
-- Joey Hess <joeyh@debian.org> Fri, 13 Jun 2014 10:06:40 -0400
propellor (0.6.0) unstable; urgency=medium
* Docker containers now propagate DNS attributes out to the host they're
docked in. So if a docker container sets a DNS alias, every container
it's docked in will automatically be added to a DNS round-robin,
when propellor is used to manage DNS for the domain.
* Apt.stdSourcesList no longer needs a suite to be specified. (API change)
* Added --dump to dump out a field of a host's privdata. Useful for editing
it.
* Propellor's output now includes the hostname being provisioned, or
when provisioning a docker container, the container name.
-- Joey Hess <joeyh@debian.org> Thu, 05 Jun 2014 17:32:14 -0400
propellor (0.5.3) unstable; urgency=medium
* Fix unattended-upgrades config for !stable.
* Ensure that kernel hostname is same as /etc/hostname when configuring
hostname.
* Added modules for some hosting providers (DigitalOcean, CloudAtCost).
-- Joey Hess <joeyh@debian.org> Thu, 29 May 2014 14:29:53 -0400
propellor (0.5.2) unstable; urgency=medium
* A bug that caused propellor to hang when updating a running docker
container appears to have been fixed. Note that since it affects
the propellor process that serves as "init" of docker containers,
they have to be restarted for the fix to take effect.
* Licence changed from GPL to BSD.
* A few changes to allow building Propellor on OSX. One user reports
successfully using it there.
-- Joey Hess <joeyh@debian.org> Sat, 17 May 2014 16:42:55 -0400
propellor (0.5.1) unstable; urgency=medium
* Primary DNS servers now have allow-transfer automatically populated
with the IP addresses of secondary dns servers. So, it's important
that all secondary DNS servers have an ipv4 (and/or ipv6) property
configured.
* Deal with old ssh connection caching sockets.
* Add missing build deps and deps. Closes: #745459
-- Joey Hess <joeyh@debian.org> Thu, 24 Apr 2014 18:09:58 -0400
propellor (0.5.0) unstable; urgency=medium
* Removed root domain records from SOA. Instead, use RootDomain
when calling Dns.primary. (API change)
* Dns primary and secondary properties are now revertable.
* When unattendedUpgrades is enabled on an Unstable or Testing system,
configure it to allow the upgrades.
* New website, https://propellor.branchable.com/
-- Joey Hess <joeyh@debian.org> Sat, 19 Apr 2014 17:38:02 -0400
propellor (0.4.0) unstable; urgency=medium
* Propellor can configure primary DNS servers, including generating
zone files, which is done by looking at the properties of hosts
in a domain.
* The `cname` property was renamed to `alias` as it does not always
generate CNAME in the DNS. (API change)
* Constructor of Property has changed (use `property` function instead).
(API change)
* All Property combinators now combine together their Attr settings.
So Attr settings can be made inside a propertyList, for example.
* Run all cron jobs under chronic from moreutils to avoid unnecessary
mails.
-- Joey Hess <joeyh@debian.org> Sat, 19 Apr 2014 02:09:56 -0400
propellor (0.3.1) unstable; urgency=medium
* Merge scheduler bug fix from git-annex.
* Support for provisioning hosts with ssh and gpg keys.
* Obnam support.
* Apache support.
* Postfix satellite system support.
* Properties can now be satisfied differently on different operating
systems.
* Standard apt configuration for stable now includes backports.
* Cron jobs generated by propellor use flock(1) to avoid multiple
instances running at a time.
* Add support for SSH ed25519 keys.
(Thanks, Franz Pletz.)
-- Joey Hess <joeyh@debian.org> Thu, 17 Apr 2014 20:07:33 -0400
propellor (0.3.0) unstable; urgency=medium
* ipv6to4: Ensure interface is brought up automatically on boot.
* Enabling unattended upgrades now ensures that cron is installed and
running to perform them.
* Properties can be scheduled to only be checked after a given time period.
* Fix bootstrapping of dependencies.
* Fix compilation on Debian stable.
* Include security updates in sources.list for stable and testing.
* Use ssh connection caching, especially when bootstrapping.
* Properties now run in a Propellor monad, which provides access to
attributes of the host. (API change)
-- Joey Hess <joeyh@debian.org> Fri, 11 Apr 2014 01:19:05 -0400
propellor (0.2.3) unstable; urgency=medium
* docker: Fix laziness bug that caused running containers to be
unnecessarily stopped and committed.
* Add locking so only one propellor can run at a time on a host.
* docker: When running as effective init inside container, wait on zombies.
* docker: Added support for configuring shared volumes and linked
containers.
-- Joey Hess <joeyh@debian.org> Tue, 08 Apr 2014 02:07:37 -0400
propellor (0.2.2) unstable; urgency=medium
* Now supports provisioning docker containers with architecture/libraries
that do not match the host.
* Fixed a bug that caused file modes to be set to 600 when propellor
modified the file (did not affect newly created files).
-- Joey Hess <joeyh@debian.org> Fri, 04 Apr 2014 01:07:32 -0400
propellor (0.2.1) unstable; urgency=medium
* First release with Debian package.
-- Joey Hess <joeyh@debian.org> Thu, 03 Apr 2014 01:43:14 -0400
propellor (0.2.0) unstable; urgency=low
* Added support for provisioning Docker containers.
* Bootstrap deployment now pushes the git repo to the remote host
over ssh, securely.
* propellor --add-key configures a gpg key, and makes propellor refuse
to pull commits from git repositories not signed with that key.
This allows propellor to be securely used with public, non-encrypted
git repositories without the possibility of MITM.
* Added support for type-safe reversions. Only some properties can be
reverted; the type checker will tell you if you try something that won't
work.
* New syntactic sugar for building a list of properties, including
revertable properties.
-- Joey Hess <joeyh@debian.org> Wed, 02 Apr 2014 13:57:42 -0400