sbuild (0.88.1) unstable; urgency=medium [ Helmut Grohne ] * configure apt's barbarian architectures for the cross build profile [ Johannes Schauer Marin Rodrigues ] * lib/Sbuild/ResolverBase.pm: disable the sbuild-cross-resolver without apt-utils in the chroot -- Johannes Schauer Marin Rodrigues Mon, 16 Dec 2024 13:55:17 +0100 sbuild (0.88.0) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * Breaking change: UNSHARE_MMDEBSTRAP_EXTRA_ARGS now supports globs and regexes as keys and is a list instead of a hash. The last part means that if you set $unshare_mmdebstrap_extra_args in your ~/.sbuildrc, you have to convert it to a list. See sbuild.conf(5) for examples and documentation. (Closes: #1088653) * lib/Sbuild/ChrootUnshare.pm: - eval replacement string to be able to reference matches in the regex - support distro mangle replacement strings containing a prefix to $1 - filter out CHRTYPE and BLKTYPE entries from tarballs (Closes: #1068382) * lib/Sbuild/Conf.pm: also replace percent-escapes in the mmdebstrap arguments * debian/tests/unshare: - disable cross-builds until #1088971 is fixed in autopkgtest - use --bd-uninstallable-explainer=apt because the dose explainer does not respect apt pinning and thus presents useless successes * lib/Sbuild/Build.pm: - don't copy in /usr/lib/apt/solvers/apt from the outside (Closes: #1088836) - refactor condition to avoid nesting and reduce indentation - be more verbose about dpkg-buildpackage failures * bin/sbuild-cross-resolver: support debug output when used by the apt BD_UNINSTALLABLE_EXPLAINER for cross building * Add a few more 'I:' status messages [ Samuel Henrique ] * Add .*-security to UNSHARE_MMDEBSTRAP_DISTRO_MANGLE (closes: #1088655) [ Chris Hofstaedtler ] * example.sbuildrc: drop "1;" [ Jochen Sprickerhof ] * Pass host architecture to piuparts * Fix mmdebstrap command when keep_tarball is not set * Add newline to uidmap error message (Closes: #1089126) * Map any UNRELEASED.* string to unstable [ Emanuele Rocca ] * bin/sbuild-usernsexec: fix passwd typos [ Julian Andres Klode ] * d/t/build-procenv: Cat the debootstrap.log if it fails [ Matthias Klose ] * add timestamps to subsection logging (Closes: #1088662) [ Niko Tyni ] * Use build start time when generating binNMU timestamp (Closes: #1089088) [ Richard Lewis ] * Remove old dependencies [ Santiago Vila ] * Use standard location for perl -- Johannes Schauer Marin Rodrigues Sun, 15 Dec 2024 22:39:40 +0100 sbuild (0.87.1) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * prefer ~/.config/sbuild/config.pl over ~/.sbuildrc (Closes: #1087378) * default build path is /build/reproducible-path and switch off log filtering * bin/sbuild: run dpkg-buildpackage --target clean instead of running debian/rules clean under fakeroot * lib/Sbuild/Conf.pm: - throw out FAKEROOT - add UNSHARE_MMDEBSTRAP_DISTRO_MANGLE * lib/Sbuild/ChrootUnshare.pm: - create new tarball for a chroot given via --chroot if it was missing - always print mmdebstrap invocation when creating new chroot tarballs - if mmdebstrap failed unlink (probably empty) tarball - print out the files that were ignored because they are empty - also translate UNRELEASED->unstable via unshare_mmdebstrap_distro_mangle * bin/sbuild-usernsexec: - do not attempt bind-mounting something that does not exist on the outside - be more verbose about what failed to mount * bin/sbuild-cross-resolver: switch license to mit/expat * Be more elaborate with explanation for insufficient disk space (Closes: #1087656) * debian/tests/unshare: test cross compilation * debian/copyright: modernize [ Alexis Murzeau ] * lib/Sbuild/Base.pm: add function to add items to array conf options * lib/Sbuild/Options.pm: replace uses of push by push_conf * test/sbuild-options-parsing.pl: test that options correctly set conf variables [ Jochen Sprickerhof ] * Improve wording about future schroot deprecation * Use mmdebstrap to create piuparts chroot [ Chris Hofstaedtler ] * Reword schroot/unshare compat warning -- Johannes Schauer Marin Rodrigues Mon, 25 Nov 2024 11:17:42 +0100 sbuild (0.87.0) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * If a tarball can't be found, create a chroot on-demand using mmdebstrap. This version introduces an experimental new feature for the unshare backend which is supposed to make sbuild more easy to use because sbuild will manage the chroot tarballs itself. With unshare-mode, sbuild will now automatically create a chroot tarball upon startup using mmdebstrap if it cannot find one in ~/.cache/sbuild. This feature can be disabled by setting $unshare_mmdebstrap_auto_create=0; in your ~/.sbuildrc. If you like the feature and you would like to keep the tarballs sbuild creates so that they can be re-used in subsequent invocations of sbuild, you can set $unshare_mmdebstrap_keep_tarball=1; in your ~/.sbuildrc. This will also make sbuild update an existing tarball (by re-creating it) if it has become too old. The maximum age of a chroot tarball can be specified by setting $unshare_mmdebstrap_max_age to a maximum age value in seconds (default is 604800, which is one week). To customize the chroot tarball creation, refer to the setting UNSHARE_MMDEBSTRAP_EXTRA_ARGS in your sbuild.conf(5). [ Jochen Sprickerhof ] * Use empty release in unshare autopkgtest (Closes: #1085450) -- Johannes Schauer Marin Rodrigues Tue, 12 Nov 2024 00:09:38 +0100 sbuild (0.86.3) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * bin/sbuild-usernsexec: add interesting package sets for the unshare backend * bin/sbuild-usernsexec: do not die if symlink creation fails but warn with the possible reason for failure (Closes: #1085219) [ Chris Hofstaedtler ] * Drop sbuild-debuild code [ Johannes Schauer Marin Rodrigues ] * If run in unshare mode and if unset in ~/.sbuildrc, run piuparts and autopkgtest in unshare mode as well, re-using the sbuild tarball * unify ROOT_ARGS handling of autopkgtest and piuparts * lib/Sbuild/Build.pm: remove use of apt's Debug::BuildDeps=1 which was last used in jessie and no longer exists in apt since stretch [ Benjamin Drung ] * debian/tests/unshare-qemuwrapper: Test absolute paths in %SBUILD_DSC * debian/tests/unshare: Test fix building symlinks not ending on .dsc (Closes: #1012856) [ Jochen Sprickerhof ] * Don't show "Keeping session:" in unshare mode (Closes: #1073295) * Update sbuild wiki link -- Jochen Sprickerhof Sun, 27 Oct 2024 08:12:10 +0100 sbuild (0.86.2) unstable; urgency=medium * unshare: disable pivot_root (Closes: #1084956) -- Johannes Schauer Marin Rodrigues Sat, 12 Oct 2024 21:57:54 +0200 sbuild (0.86.1) unstable; urgency=medium * unshare: Don't setsid() for hooks (Closes: #1084174) * Add warning for schroot users * Fix lintian warning superfluous-file-pattern -- Jochen Sprickerhof Fri, 11 Oct 2024 09:33:39 +0200 sbuild (0.86.0) unstable; urgency=medium [ Chris Hofstaedtler ] * Remove buildd-mail-wrapper compat symlink * Remove NEWS-buildd, ending in 2004 * Remove reference to deleted ChangeLog-buildd * Remove Makefile-buildd [ Johannes Schauer Marin Rodrigues ] * lib/Sbuild/Build.pm: warn if source package name is not defined * lib/Sbuild/ConfBase.pm: fall back to sane PATH if unset * debian/salsa-ci.yml: SALSA_CI_REPROTEST_ENABLE_DIFFOSCOPE: 1 * remove ./debian/buildd.init * d/rules: set LC_ALL=C.UTF-8 for reproduciblity (Closes: #1082358) * refactor the unshare backend as /usr/libexec/sbuild-usernsexec [ Helmut Grohne ] * sbuild-usernsexec: avoid getpwnam inside the chroot [ Grzegorz Szymaszek ] * man/sbuild-update.1: delete clean from an example [ Johannes Schauer Marin Rodrigues ] * add .perltidyrc * lib/Sbuild/Build.pm: when auto-adding deb-src to EXTRA_REPOSITORIES, consider sources.list entries unique by Repo-URI, Codename and Component [ Jochen Sprickerhof ] * Remove unused use * unshare: mkdir before bind mounting [ Johannes Schauer Marin Rodrigues ] * bin/sbuild-usernsexec: let make_path croak() by itself on error. Thanks to Guillem Jover -- Jochen Sprickerhof Wed, 02 Oct 2024 14:59:15 +0200 sbuild (0.85.11) unstable; urgency=medium [ Christian Kastner ] * sbuild-qemu: Add discard=unmap to drive options * sbuild-qemu-update: Reduce image size after update (Closes: #1073509) [ Paride Legovini ] * Unshare: run useradd/groupadd with --prefix instead of --root [ Jochen Sprickerhof ] * Mark dumb-init as :native (Closes: #1079731) -- Jochen Sprickerhof Wed, 28 Aug 2024 11:15:11 +0200 sbuild (0.85.10) unstable; urgency=medium * autopkgtest: skip test for unreleased architecture -- Jochen Sprickerhof Thu, 30 May 2024 10:41:26 +0200 sbuild (0.85.9) unstable; urgency=medium [ Aurelien Jarno ] * Unshare: add IPv6 loopback address to /etc/hosts * Unshare: preserve HOME environment variable * Unshare: define the LOGNAME environment variable [ Christian Kastner ] * sbuild-qemu: Fix typo breaking one guess for image path * sbuild-qemu: Don't add --dist (Closes: #1071000) [ Helmut Grohne ] * lib/Sbuild/ChrootUnshare.pm: Do not expose /sys/kernel in the unshare backend. (Closes: #1071234) [ Timo Röhling ] * Relax permissions on pipes connected to STDOUT (Closes: #1070007) [ Johannes Schauer Marin Rodrigues ] * lib/Sbuild/Conf.pm: make the schroot binary configurable via ~/.sbuildrc * bin/sbuild: only check group membership if 'schroot' is configured as the schroot binary -- Jochen Sprickerhof Wed, 29 May 2024 10:46:22 +0200 sbuild (0.85.8) unstable; urgency=medium [ Aurelien Jarno ] * man/sbuild-createchroot.8.in: fix unshare mode example * Unshare: use linux32 personality for 32-bit on 64-bit architectures -- Jochen Sprickerhof Thu, 25 Apr 2024 14:49:56 +0200 sbuild (0.85.7) unstable; urgency=medium [ Santiago Ruano Rincón ] * Remove deprecation note about the sudo chroot mode [ Christian Kastner ] * sbuild-qemu: Use 4M OVMF images if available [ Jochen Sprickerhof ] * Add --{no-,}enable-network and ENABLE_NETWORK options * Unshare: use dumb-init for build * Run post-build-failed-commands before cleanup * Add myself to uploaders [ Boyuan Yang ] * "directory" is available for "--extra-package" (Closes: #1040978) -- Jochen Sprickerhof Fri, 12 Apr 2024 18:50:09 +0200 sbuild (0.85.6) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * d/tests/unshare: generate a new GPG key every time using sqop. * d/tests/unshare: copy apt sources and preferences from outside the chroot * d/control: let buildd depend on sbuild (= ${binary:Version}) as it is not arch:any * d/tests/unshare-qemuwrapper: drop --mode=unshare in favour of mmdebstrap picking the mode automatically depending on what is available * man/sbuild-debian-developer-setup.1.in: document where the chroot is placed * lib/Sbuild/ChrootUnshare.pm: use HOME from config instead of the environment * follow adduser's changes in example: --gecos => --comment [ Benjamin Drung ] * d/t/get_default_release.py: Support Ubuntu * Test unshare autopkgtest directly [ Dave Jones ] * Update verify_deb to match current zstd output [ Tianyu Chen ] * Fix extra-packages log output [ Arnaud Rebillout ] * Update sbuild-createchroot man page regarding merged-usr -- Johannes Schauer Marin Rodrigues Mon, 26 Feb 2024 19:22:49 +0100 sbuild (0.85.5) unstable; urgency=medium [ Jochen Sprickerhof ] * Replace ‐ with - in commands [ Johannes Schauer Marin Rodrigues ] * sbuild-qemu-update: pass exec args as list avoiding a sub-shell * sbuild-qemu-update: add --verbose and --quiet * sbuild-qemu-update: allow passing arbitrary extra options to qemu after a double dash * sbuild-qemu-update: add --boot option analogous to autopkgtest-virt-qemu (Closes: #1061636) [ Christian Kastner ] * sbuild-qemu-create: add --boot option analogous to autopkgtest-build-qemu * sbuild-qemu-boot: add --boot option analogous to autopkgtest-virt-qemu * sbuild-qemu: add --boot option analogous to autopkgtest-virt-qemu * sbuild-qemu-update: Add help message to --boot * sbuild-qemu*: Update manpages for --boot * sbuild-qemu-create: Remove APT lists to reduce image size. * Bump copyrights -- Christian Kastner Tue, 13 Feb 2024 19:59:25 +0100 sbuild (0.85.4) unstable; urgency=medium * debian/tests/unshare-qemuwrapper: - use hook directory copy-host-apt-sources-and-preferences - explicitly choose unshare mode * debian/tests/control: - remove needs-root from unshare-qemuwrapper - add dep on uidmap -- Johannes Schauer Marin Rodrigues Thu, 26 Oct 2023 23:01:14 +0200 sbuild (0.85.3) unstable; urgency=medium [ Lee Garrett ] * Remove reference to bug that has been closed for 6 years [ Johannes Schauer Marin Rodrigues ] * debian/tests/unshare-qemuwrapper: use debvm -- Johannes Schauer Marin Rodrigues Sun, 24 Sep 2023 01:06:51 +0200 sbuild (0.85.2) unstable; urgency=medium * buildd: Demote lsb-base dependency to the lesser alternative. -- Christian Kastner Sat, 11 Mar 2023 10:05:09 +0100 sbuild (0.85.1) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * add .mailmap [ Christian Kastner ] * Add myself to .mailmap * Bump Standards-Version to 4.6.2 (no changes needed) * sbuild-qemu: Properly handle --arch, --build, --host. * sbuild-qemu: Fix broken --overlay-dir * sbuild-qemu-update: Increase default timeout to 600s. * sbuild-qemu-update: Add --timeout option * sbuild-qemu-create: Add support for /root/.ssh/authorized_keys * sbuild-qemu-create: Properly quote variables * sbuild-qemu-boot: Set tty geometry to host's geometry * sbuild-qemu-boot: Add option to forward SSH -- Christian Kastner Fri, 10 Mar 2023 22:17:29 +0100 sbuild (0.85.0) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * lib/Sbuild/Conf.pm: replace deprecated Dpkg::Build::Info::get_build_env_allowed by Dpkg::BuildInfo::get_build_env_allowed (Closes: #1027719) * debian/control: bump libdpkg-perl dep to 1.21.14 because of Dpkg::BuildInfo::get_build_env_allowed * lib/Sbuild/ResolverBase.pm: copying debs can take a long time -- output log messages * the sbuild dummy repository should not be considered to create a deb-src entry automatically * lib/Sbuild/ChrootUnshare.pm: guard against empty /etc/subuid and /etc/subgid * debian/tests/unshare: uncompress source package before comparing to ignore differences in the compression (dpkg recently started using threaded xz compression for source packages) * add get_default_release.py to figure out the archive used by the currently running system * debian/tests/unshare: put common sbuild invocation into a function * debian/tests/unshare: do not run apt upgrade nor apt update * debian/tests/control: add dependency on python3-apt * debian/tests/unshare-qemuwrapper: do not cleanup apt list files or otherwise we have to call apt update again later * lib/Sbuild/Build.pm: reduce number of self->get_conf() calls * debian/control: add debootstrap as dependency of sbuild-debian-developer-setup * bin/sbuild-createchroot: set MERGED_USR to 'auto' letting debootstrap decide * bin/sbuild-debian-developer-setup: inform the user where the chroot is and that the current user has already been added to the sbuild group [ Jochen Sprickerhof ] * Make the DSC Dir configurable [ Dave Jones ] * Skip build-procenv when mknod would fail (Closes: #928364) [ Benjamin Drung ] * Fix building symlinks not ending on .dsc (Closes: #1012856) -- Johannes Schauer Marin Rodrigues Wed, 04 Jan 2023 14:04:05 +0100 sbuild (0.84.2) unstable; urgency=medium [ Stefano Rivera ] * fix autopkgtest LXD mode and sbuild-qemu (closes: #1024619) -- Johannes Schauer Marin Rodrigues Thu, 08 Dec 2022 10:20:58 +0100 sbuild (0.84.1) unstable; urgency=medium [ Jochen Sprickerhof ] * unshare_bind_mounts: use rbind to mount subtrees * unshare: Use user/groupadd from outside the chroot [ Johannes Schauer Marin Rodrigues ] * Revert "bin/sbuild-createchroot: Do not hardcode mirror argument" as this creates invalid deb-src entries in sources.list -- Johannes Schauer Marin Rodrigues Tue, 15 Nov 2022 08:05:31 +0100 sbuild (0.84.0) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * bin/sbuild-createchroot: die if move() fails * bin/sbuild-debian-developer-setup: Don't alias to sid/UNRELEASED if suite is not unstable (Closes: #1014574) * debian/copyright: update copyright for makefiles and debian/* * debian/tests/unshare-qemuwrapper: allow ~/.ssh to exist already * debian/tests/unshare-qemuwrapper: bump disk size to 4G (Closes: #1016070) * debian/tests/unshare: don't fail if gpghome cannot be removed * debian/tests/unshare: gpgconf --kill all before removing gpghome * debian/tests/unshare: run with --no-source-only-changes * debian/tests/unshare: run with --nolog to output log to stdout * lib/Sbuild/Build.pm: automatically add a deb-src entry if necessary * lib/Sbuild/ResolverBase.pm: factor out add_extra_repositories() * lib/Sbuild/ResolverBase.pm: stop emitting Packages.gz and Sources.gz * man/sbuild-qemu-boot.1.in: fix typo Bood -> Boot * man/sbuild.1.in: unshare chroot mode is not experimental anymore [ Benjamin Drung ] * Fix shellcheck issues in autopkgtests * Revert "debian/tests/build-procenv: add deb-src repository" * Run unshare autopkgtest against target release * Set NO_PKG_MANGLE=1 when building dummy packages * unshare-qemuwrapper: Cleanup guestfs appliance * unshare-qemuwrapper: Disable SSH password authentication * unshare-qemuwrapper: Support Ubuntu * unshare-qemuwrapper: Use free port * unshare-qemuwrapper: Use linux-image-cloud-amd64 * unshare-qemuwrapper: Use sbuild in temp directory name [ Dave Jones ] * Ensure umask is consistent with the comparison blobs [ Christoph Berg ] * run_autopkgtest: Accept exit 2 as pass [ Andrea Pappacoda ] * sbuild-debian-developer-setup: alias the chroot to UNRELEASED-$arch-sbuild (Closes: #1006135) [ Mattias Jernberg ] * bin/sbuild-createchroot: Do not hardcode mirror argument to debootstrap (Closes: #1010665) [ Ben Westover ] * sbuild-debian-developer-setup: Add option to specify chroot architecture [ Jochen Sprickerhof ] * Replace adduser by useradd * Unshare: create sbuild group -- Johannes Schauer Marin Rodrigues Wed, 02 Nov 2022 21:42:11 +0100 sbuild (0.83.2) unstable; urgency=medium [ Jochen Sprickerhof ] * Support $path in unshare backend * Support systems without a resolv.conf in unshare backend * Unshare: add minimal etc/hosts [ Dave Jones ] * verify() in unshare uses the same (wrong) parameter for $verify_* * devscripts is missing from EXTRA_DEPS * Update verify_deb to match zstd compressed debs [ Johannes Schauer Marin Rodrigues ] * lib/Sbuild/ChrootUnshare.pm: add /dev/{stdin,stdout,stderr} * Mount a new instance of /dev/pts in the chroot [ Aurelien Jarno ] * Buildd::Mail: support MIME encoded Subject: header * Buildd::Mail: also copy the Content-Type: header when forwarding mail -- Aurelien Jarno Mon, 29 Aug 2022 22:44:02 +0200 sbuild (0.83.1) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * bin/sbuild-cross-resolver: we don't need the English module (closes: #1005957) * debian/tests/unshare: run with -x * lib/Sbuild/Utility.pm: add warning about missing libwww-perl (closes: #1009859) [ Jochen Sprickerhof ] * lib/Sbuild/ChrootUnshare.pm: mkdir for bind mounts [ Daniel Kahn Gillmor ] * Use --batch with gpg when importing secret key (Closes: #1010171) -- Johannes Schauer Marin Rodrigues Tue, 26 Apr 2022 11:21:44 +0200 sbuild (0.83.0) unstable; urgency=medium * sbuild-qemu (package): - Support for new architectures: armhf, arm64, ppc64el - Move vmdb2 to Depends - Depend on autopkgtest (>= 5.17~) * sbuild-qemu: - Fix looking for images when --arch was specified - sbuild-qemu: rename --ram to --ram-size. This matches the autopkgtest-virt-qemu option - Reduce default CPU count to 2, rather than equal to host cores. This is more likely to work on all platforms * sbuild-qemu-create: - Update shared dir setup (deprecated QEMU syntax). Existing images will no longer work and will need to be recreated * sbuild-qemu-update: - Fix QEMU launch issues (network, serial) - Reduce memory requirement. 1GiB is sufficient for apt-get operations * sbuild-qemu-boot: New utility to boot to a VM console -- Christian Kastner Sat, 05 Feb 2022 18:02:40 +0100 sbuild (0.82.1) unstable; urgency=medium * fix sbuild-cross-resolver * copy solvers from /usr/lib/apt/solvers into chroot if cross-building * add dependency on apt-utils for /usr/lib/apt/solvers/apt * chown /var/lib/sbuild 755 so that the _apt user can read apt.conf inside it * remove maintainer script support for ancient package versions * debian/control: bump Standards-Version (no changes) * debian/source/include-binaries is not needed anymore -- Johannes Schauer Marin Rodrigues Sat, 29 Jan 2022 16:52:05 +0100 sbuild (0.82.0) unstable; urgency=medium [ Johannes Schauer Marin Rodrigues ] * remove etc/99builddsourceslist as it is unused * bin/sbuild-createchroot: avoid allowing execution of arbitrary Perl code via a custom mirror URL (closes: #1001807) * debian/tests/build-procenv: add deb-src repository * debian/tests/unshare-qemuwrapper: use copy:// instead of file:// * man/sbuild.1.in: document the --arch-all and --no-arch-all defaults while cross-building * lib/Sbuild/ChrootUnshare.pm: also create /dev/console and /dev/ptmx and mount /dev/pts and /dev/shm * lib/Sbuild/Build.pm: fix error reporting of 'changes.new could not be renamed' * add sbuild-cross-resolver filtering out m-a:foreign and essential:yes packages that are not arch:all and not arch:native during cross-building * bump debhelper-compat to 13 * use dh-sequence-python3 instead of --with=python3 * run wrap-and-sort * add myself to d/copyright -- better late than never ;) * debian/control: add uidmap to Recommends (closes: #986962) * use debian/*.manpages instead of debian/*.install to install manpages * add UNSHARE_BIND_MOUNTS allowing to bind-mount directories into the chroot in unshare mode (closes: #986694) [ Samuel Thibault ] * control: Fix git URLs. [ Christian Kastner ] * sbuild.1: Refresh unshare info [ Jochen Sprickerhof ] * Don't overwrite BUILD_DIR when compiling in src dir (Closes: #990734) [ Vagrant Cascadian ] * lib/Sbuild/Utility.pm: Add support for zstd compression. (Closes: #987655) -- Johannes Schauer Marin Rodrigues Mon, 24 Jan 2022 23:30:27 +0100 sbuild (0.81.2) unstable; urgency=medium * Package sbuild-qemu should be arch:all, not arch:amd64. Resolves a FTBFS. -- Christian Kastner Sun, 31 Jan 2021 15:34:54 +0100 sbuild (0.81.1) unstable; urgency=medium * lib/Sbuild/ChrootUnshare.pm: also ignore /dev/console when unpacking rootfs becauke mknod is forbidden in unshare mode * lib/Sbuild/Build.pm: add comment about #977674 * bin/sbuild: use umask 0022 as default for Debian -- see dpkg source: scripts/Dpkg/Vendor/Debian.pm * lib/Sbuild/Build.pm: run dpkg-buildpackage with --sanitize-env if dpkg 1.20.0 is available * add new unshare autopkgtest with qemu wrapper -- Johannes 'josch' Schauer Sun, 31 Jan 2021 10:41:30 +0100 sbuild (0.81.0) unstable; urgency=medium [ Johannes 'josch' Schauer ] * make 'none' explicitly disable the bd-uninstallable-explainer. Thanks helmut & vagrantc [ Jochen Sprickerhof ] * Cleanup link in /etc/sbuild if it exists [ Christian Kastner ] * Add package sbuild-qemu, replaces qemu-sbuild-utils - The utilities have been renamed from qemu-sbuild-* to sbuild-qemu-* to for consistency * Add myself to Uploaders * Set Rules-Requires-Root: no * Bump Standards-Version to 4.5.1 [ Bruno Kleinert ] * Removed obsolete script /usr/share/sbuild/create-chroot to fix 'bullseye: /updates -> -security'. Neither sbuild itself, nor any reverse dependency appear to depend on that script, so removed it. (Closes: #972747) -- Johannes 'josch' Schauer Sun, 24 Jan 2021 23:13:34 +0100 sbuild (0.80.1) unstable; urgency=medium * Fix build system to rely on debian/changelog instead of VERSION file * use mkdir -p when creating build_path (thanks Niels Thykier) -- Johannes 'josch' Schauer Sat, 05 Dec 2020 17:46:22 +0100 sbuild (0.80.0) unstable; urgency=medium [ Johannes 'josch' Schauer ] * New release * Convert packaging to a native package to make maintenance easier by avoiding the complicated upstream release and debian packaging procedure * lib/Sbuild/Conf.pm: fix example for individual_stalled_pkg_timeout (closes: #924500) * man/sbuild.1.in: remove from docs of --autopkgtest-virt-server-opts (closes: #948799) * lib/Sbuild/Build.pm: check for defined-ness and even print a '0' Version (closes: #950939) * debian/control: due to using Dpkg::Build::Info::get_build_env_allowed, we now require libdpkg-perl (>= 1.20) * man/sbuild.1.in: starting/finished/failed-build-commands are run as root (closes: #961623) * bin/sbuild-createchroot: chown root dir 0755 (closes: #950684) * use Dpkg::Build::Info::get_build_env_allowed instead of deprecated Dpkg::Build::Info::get_build_env_whitelist for dpkg >= 1.20.0 (closes: #963845, #966428) [ Pierre-Elliott Bécue ] * Workaround to pass on dpkg-genchanges specific options until dpkg bug #902856 is fixed (closes: #884428, #891247, #917849, #947755) -- Johannes 'josch' Schauer Sat, 01 Aug 2020 14:07:53 +0200 sbuild (0.79.1-1) unstable; urgency=medium * Team upload. * New upstream release. * add option --dpkg-file-suffix to buildd * switch to debhelper compat 12 * switch dh_installinit call to --no-stop-on-upgrade * buildd: remove calls to dpkg-maintscript-helper * test build-procenv: replace ADTTMP with AUTOPKGTEST_TMP -- Ivo De Decker Wed, 22 Apr 2020 22:35:33 +0000 sbuild (0.79.0-1) unstable; urgency=medium * Team upload. * New upstream release. * remove debian/patches (have been applied upstream) * add buildd depends on devscripts and recommends on sudo (closes: #920335, #774856) * debian/tests/build-procenv: don't install packages from a different distro (closes: #928366) * pass the right .changes file to lintian (closes: #934721) * sbuild-createchroot: use umask 0022 (closes: #921675) * fix etc/sbuild-debian-developer-setup-update-all (closes: #922148) * add apt_keep_downloaded_packages option (closes: #933723) * add option --dpkg-file-suffix -- Ivo De Decker Wed, 05 Feb 2020 17:41:38 +0100 sbuild (0.78.1-2) unstable; urgency=medium [ Mike Gabriel ] * debian/patches: Add support-gzip-in-wheezy.patch. The gzip command in Debian wheezy lacks support for the --keep cmdline option, so avoid using it. (closes: #926161) [ Aurelien Jarno ] * debian/patches: Add fix-disk-space-directory-check.patch. The right directory has to be checked inside the chroot. (closes: #923484) -- Johannes 'josch' Schauer Wed, 03 Apr 2019 14:08:12 +0200 sbuild (0.78.1-1) unstable; urgency=medium * New upstream release. * fix syntax of generated Sources.gz files (Closes: #920227) -- Johannes 'josch' Schauer Sat, 09 Feb 2019 07:25:07 +0100 sbuild (0.78.0-2) unstable; urgency=medium * Fix debian/sbuild-debian-developer-setup.postrm by removing wrong default case -- Johannes 'josch' Schauer Thu, 10 Jan 2019 17:03:25 +0100 sbuild (0.78.0-1) unstable; urgency=medium * New upstream release. * remove debian/patches (have been applied upstream) * Add libc-dev and libstdc++-dev when cross compiling (closes: #905346) * default to --no-arch-all for cross builds (closes: #905347) * Set build profiles cross and nocheck by default when cross building (closes: #905345) * bin/sbuild-createchroot: allow an empty lost+found directory in the target directory (closes: #909378) * add --no-source-only-changes option (closes: #904968) * sbuild-createchroot: Do not check for empty directory if --setup-only option is used (closes: #916009) * do not check debian/tests/control when running autopkgtest (closes: #916924) * add sbuild and BUILD_USER if they didn't exist yet (closes: #911979) * let --append-to-version imply --no-arch-all like it's the case for --make-binNMU (closes: #911399) * allow chroots with nothing more but Essenital:yes packages, apt and their hard dependencies and create missing users and groups as needed (closes: #909847) * run wrap-and-sort * let sbuild Suggests e2fsprogs for /usr/share/sbuild/create-chroot (closes: #887264) * remove /var/log/sbuild-update-all.log if sbuild-debian-developer-setup gets purged (closes: #905513) * bump debhelper compat to 11 * debian/control: bump Standards-Version to 4.3.0 (no changes) -- Johannes 'josch' Schauer Wed, 09 Jan 2019 05:53:49 +0100 sbuild (0.77.1-2) unstable; urgency=medium * Add patch allowing to control merged /usr (closes: #913228) -- Johannes 'josch' Schauer Tue, 13 Nov 2018 16:07:19 +0100 sbuild (0.77.1-1) unstable; urgency=medium * New upstream release. * Run dpkg-source --before-build and --after-build (closes: #886633) * Move sbuild-debian-developer-setup man page to correct package (closes: #907076) -- Johannes 'josch' Schauer Tue, 11 Sep 2018 00:08:08 +0200 sbuild (0.77.0-4) unstable; urgency=medium * Add patch to fix the empty directory check of sbuild-create-chroot (closes: #904722) -- Johannes 'josch' Schauer Fri, 27 Jul 2018 14:03:10 +0200 sbuild (0.77.0-3) unstable; urgency=medium * Patch sbuild-destroychroot with an import of SchrootInfo (closes: #903513) -- Johannes 'josch' Schauer Wed, 11 Jul 2018 21:32:04 +0200 sbuild (0.77.0-2) unstable; urgency=medium * Install /usr/sbin/sbuild-adduser and /usr/sbin/sbuild-destroychroot again (closes: #903269) -- Johannes 'josch' Schauer Sun, 08 Jul 2018 15:52:22 +0200 sbuild (0.77.0-1) unstable; urgency=medium * New upstream release. * debian/control: move "exim4 | mail-transport-agent" from Recommends to Suggests (closes: #863718) * Set maintainer address to sbuild@packages.debian.org (closes: #899688) * lib/Sbuild/Build.pm: filter out foreign essential and multiarch foreign packages before passing them to dose3 (closes: #865432) * man/sbuild.1.in: pre- and post-build-commands are run as non-root (closes: #900916) * Add null resolver which does not install, upgrade or remove any packages (closes: #858899) * lib/Sbuild/ResolverBase.pm: also print kernel version (closes: #866402) * lib/Sbuild/Build.pm: install (cross-)build-essential, manual depends and build depends with a single dummy package (closes: #871968) * lib/Sbuild/Build.pm: dump .dsc content before extracting it (closes: #901727) * Add config variables that allow sbuild to fail if lintian, piuparts or autopkgtest fail (closes: #891590) * lib/Sbuild/ResolverBase.pm: run dpkg-scanpackages with -m to allow multiple architectures of the same package (closes: #886257) * lib/Sbuild/Build.pm: additional Lintian reasons info and warn (closes: #893228) * man/sbuild.1.in: fix typo (closes: #891588) * lib/Sbuild/Build.pm: also cope with special characters when filtering the log (closes: #901730) * Add new log filtering for /build/pkg-minimal-XXX/resolver-YYY: <> (closes: #901725) * lib/Sbuild/Build.pm: only run autopkgtest if debian/tests/control exists (closes: #901167) * lib/Sbuild/Options.pm: --make-binNMU implies --no-arch-all (closes: #898946) * etc/sbuild-update-all: set executable bit (closes: #870451) * lib/Sbuild/ChrootSetup.pm: If BUILD_PATH is set, use it instead of /build (closes: #868657) * lib/Sbuild/ResolverBase.pm: clean /var/cache/apt/archive/*.deb after package installation (closes: #861762) * bin/sbuild-createchroot: also check exit status of schroot (closes: #866006) * Replace httpredir.debian.org with deb.debian.org (closes: #901372) * lib/Sbuild/ChrootSetup.pm: run groupadd instead of copying entry from host (closes: #867180) * man/sbuild-createchroot.8.in: fix outdated path in text description (closes: #901360) * bin/sbuild-createchroot: error out early when the target directory exists and is not empty (closes: #888710) * Remove support for signing the dummy archive (closes: #837188) * I now detect more directly if the source wasn't yet unpacked (closes: #882057) * debian/control: replace priority:extra by optional * debian/copyright: use secure copyright format uri * debian/copyright: fix some outdated information now that sbuild lives on salsa * debian/control: update vcs-git and vcs-browser to salsa * debian/control: fix my name * debian/control: depend on real cron as first alternative before virtual cron-daemon * debian/control: add alternative default-mta before mail-transport-agent * debian/sbuild.postinst: avoid recursive chown -- Johannes 'josch' Schauer Fri, 06 Jul 2018 23:11:45 +0200 sbuild (0.76.0-1) unstable; urgency=medium * Install sbuild-debian-developer-setup-update-all cronjob (closes: #893577) -- Michael Stapelberg Mon, 09 Apr 2018 18:58:38 +0200 sbuild (0.75.0-1) unstable; urgency=medium * New upstream release. * buildd: only build arch:any packages (closes: #893608) * buildd: do not run lintian * remove harmful unnecessary lintian binary check (closes: #893226) -- Michael Stapelberg Wed, 21 Mar 2018 22:24:01 +0100 sbuild (0.74.0-1) unstable; urgency=medium * New upstream release * Install dose-distcheck and lintian for the native architecture * remove DCMD config value which is not used and just uselessly making libsbuild-perl depend on devscripts * use dpkg-query instead of grep-status so that dependency on grep-dctrl is not needed anymore * suppress schroot writing to stderr in sbuild-createchroot * check for modprobe in sbuild-createchroot * Add missing newline character to a bunch of error messages * dose3 failures no longer mask the --build-deps-failed-commands * Build arch: all packages by default (closes: #870263) * Run lintian by default (closes: #870263) * sbuild-createchroot: add --command-prefix (closes: #870260) * add sbuild-debian-developer-setup package (closes: #859867) -- Michael Stapelberg Wed, 14 Mar 2018 21:55:42 +0100 sbuild (0.73.0-4) unstable; urgency=medium * Retroactively add two entries into debian/NEWS for the Stretch release. -- Johannes Schauer Tue, 24 Jan 2017 10:58:18 +0100 sbuild (0.73.0-3) unstable; urgency=medium * Add patch installing dose-distcheck in the native architecture * Refresh other patches as "git format-patch" from sbuild git master branch -- Johannes Schauer Sun, 22 Jan 2017 15:03:49 +0100 sbuild (0.73.0-2) unstable; urgency=medium * Bump build-depends on libdpkg-perl to 1.18.14 as sbuild is using Dpkg::Build::Info now (closes: #850075) -- Johannes Schauer Wed, 04 Jan 2017 08:17:08 +0100 sbuild (0.73.0-1) unstable; urgency=medium * New upstream release * man/sbuild.1.in: clarify docs for --append-to-version and --make-binNMU (closes: #844583) * Allow passing a directory to --extra-package which will add all .deb inside (closes: #844457) * Unconditionally update repositories given via --extra-repository (closes: #842281) * For binNMUs, instead of copying the timestamp of the last changelog entry, generate a new one (closes: #843773) * Output build type in buildlog in the format used by dpkg-buildpackage --build (closes: #820977) * Install extra packages into their own internal repository which is created at resolver creation time so that extra packages are considered during the upgrade step (closes: #843694) * Also output .buildinfo in buildlog (closes: #843933) * pass the absolute path of extra .deb package to dpkg-deb (closes: #843692) * Always pass the source package to lintian (closes: #843622) * Do not print negative used space but n/a instead (closes: #842947) * bin/sbuild-apt: pass --yes to apt operations as the apt operations are not interactive (closes: #842138) * Do not set 'Changes File' in copy_changes to avoid it being set to the source-only changes file (closes: #842705) * starting-build-command and finished-build-commands are now run as root. * The autopkgtest-virt backends are no longer supplied with the chroot name. * Add SBUILD_BUILD_ARCH percent escape. * Use Dpkg::Build::Info::get_build_env_whitelist() to generate the default of ENVIRONMENT_FILTER. * Add the --binNMU-timestamp command line option to allow one to pass a custom timestamp for the new binNMU changelog entry. * Add option --binNMU-changelog which allows one to pass a complete debian/changelog entry for binary-only builds. * The autopkgtest backend now runs into its own process group. * Bump sbuild Depends on libdpkg-perl to at least 1.18.14 because of its use of Dpkg::Build::Info::get_build_env_whitelist() * Move most Build-Depends to Build-Depends-Indep * Drop dependency and build dependency on libio-zlib-perl which is provided by perl-modules even in old-stable * Drop dependency on apt-utils because sbuild does not use apt-ftparchive anymore * Do not let libsbuild-perl depend on adduser, dctrl-tools and devscripts as it doesn't use them. * Make schroot and autopkgtest Recommends as they are both working backends * Run dh_installinit with --no-start and --no-restart-on-upgrade so that the buildd daemon does not get started on installation (closes: #842057) * Update autopkgtest - Don't sign internal dummy repository anymore - Download source package inside the build chroot because the host might not be having the requested release in its sources.list - Do not depend on procenv build depends as they should be installed inside the build chroot and not on the host - use "apt install" instead of "dpkg -i" to also install dependencies - Several tiny fixes to make the test suite succeed again * Make schroot a hard dependency of buildd (it requires /etc/schroot/chroot.d/ in its postinst script) * Add patch to remove DCMD config value which is not used and just uselessly making libsbuild-perl depend on devscripts * Add kmod to Suggests of sbuild because modprobe is optionally used by sbuild-createchroot * Add patch to use dpkg-query instead of grep-status so that dependency on grep-dctrl is not needed anymore * Add patch that suppresses schroot writing to stderr in sbuild-createchroot * Add patch that checks for modprobe in sbuild-createchroot * Remove xs-testsuite header from debian/control * Adapt libsbuild-perl short description to not say "Tool" anymore but "Library" * Replace git:// in Vcs-Git field by https:// * Bump Standard-Version to 3.9.8 (no changes required) * Convert debian/copyright to DEP-5 (make machine readable) -- Johannes Schauer Sat, 24 Dec 2016 02:28:48 +0100 sbuild (0.72.0-2) unstable; urgency=medium * Fix regression from 0.72.0 upload: install forward file as .forward and not as buildd.forward (closes: #842057) * Add myself to Uploaders -- Johannes Schauer Wed, 26 Oct 2016 08:47:50 +0200 sbuild (0.72.0-1) unstable; urgency=medium * New upstream release * Remove all patches (they have been integrated upstream) * Convert package to dh 10, allowing the most simple d/rules file. * Remove Roger Leigh from the Uploaders field (they left Debian) * Add dependency of buildd on lsb-base (>= 3.0-6) because of the init script it ships (/etc/init.d/buildd) * lib/Sbuild/Build.pm: fixing that if build() raises an exception then build time and space doesn't get set (closes: #835338) * lib/Sbuild/AptitudeResolver.pm: Do not add architecture qualifiers to dependencies if chroot doesn't support multiarch (closes: #836737) * lib/Sbuild/Build.pm: Don't do architecture check if BUILD_SOURCE is true (closes: #836154) * lib/Sbuild/ChrootSudo.pm: Instead of forbidding single quotes, properly quote the exec string (closes: #836175) * When printing ASCII art boxes, cater for the situation where their content is longer than their default width by increasing the box width (closes: #841015) * bin/sbuild-createchroot: do not overwrite /etc/hosts if it already existed and also write ipv6 entries if it didn't (closes: #841165) * sbuild-createchroot: clean up downloaded .deb archives (closes: #841169) * Add --bd-uninstallable-explainer and make dose3 the default (closes: #839566) * Warn if a binary package of incompatible architecture with the chroot is added via --extra-package (closes: #820882) * Accommodate for the autopkgtest 4.0 release by renaming all adt command line options and configuration variables from adt to autopkgtest because the same renaming was done by the autopkgtest release (closes: #833436) * Add Depends on gnupg (>= 2.1) because sbuild now makes use of features like --pinentry-mode=loopback for key creation (closes: #840575) -- Johannes Schauer Tue, 25 Oct 2016 07:43:07 +0200 sbuild (0.71.0-2) unstable; urgency=medium * add patch to not check for the fakeroot binary on the host. Thanks Gianfranco Costamagna * Do not recommend fakeroot anymore. It is not needed on the host but only inside the chroot. -- Johannes Schauer Sat, 27 Aug 2016 11:20:06 +0200 sbuild (0.71.0-1) unstable; urgency=medium * add autopkgtest to Suggests * Undo exporting private keys in armored ASCII format as introduced by the last release. It turns out, that this is not necessary to support gpg cross-version compatibility. This should fix problems with gpg 2.x as well as chroots not having gpg installed as apt stopped depending on it. (closes: #827315, #834898) * Undo the SUITE-VARIANT syntax of sbuild-createchroot as introduced by the last release. It turns out that overloading the suite name argument with a variant name was a bad idea because there exist distributions with a minus in its name. Variant names can now be specified using the --chroot-prefix option which works analogous to the --chroot-suffix option. (closes: #834515) * Add percent escape support to piuparts, autopkgtest and adt-virt options. (closes: #833285, #833286) * Add sbuild-destroychroot. * Allow running autopkgtest when sbuild downloads the .dsc (closes: #833549) * Run apt-cache without --only-source (closes: #834704) * Avoid dropping extra repositories before using them (closes: #834497) * lib/Sbuild/ResolverBase.pm: Fix copypaste error s/public/private/ (closes: #834330) * lib/Sbuild/ChrootSetup.pm: don't prompt the user during --keygen (closes: #833547) * Add an option to not prefix piuparts and autopkgtest with anything at all (closes: #833390) * lib/Sbuild/Build.pm: add red/green coloring to log when piuparts or autopkgtest succeed/fail (closes: #833552) -- Johannes Schauer Wed, 24 Aug 2016 13:42:26 +0200 sbuild (0.70.0-1) unstable; urgency=medium * new upstream version - Fix reproducibility issue by not writing the $HOME as set during the build into config files and man pages anymore (closes: #825991) - Add an EXAMPLE section to the sbuild man page (closes: #824582) - sbuild-createchroot now has support for SUITE-VARIANT chroot names. This is useful to create variants of base suits like jessie-backports or unstable-experimental. (closes: #826957) - sbuild-createchroot now has the --no-deb-src option which allows one to create a chroot without a deb-src entry in its sources.list. This is useful to save bandwidth and disk space for chroots that will never be used to download source packages as the source indices do not have to downloaded, stored and later updated from the mirrors. (closes: #826847) - sbuild-createchroot now has the --alias option which is useful to add a shorthand alias to a chroot which will be used for chroot selection. This is for example useful for a Debian unstable chroot which will be automatically selected for package builds that have UNRELEASED in their debian/changelog, if the UNRELEASED alias is added to the Debian unstable chroot. (closes: #800593) - suild-createchroot now has the --extra-repository which works like the --extra-repository option for sbuild and permanently adds another line to the chroot's sources.list. - Private/public key pairs are now stored in armored ASCII format to maintain compatibility between different gpg versions on the host and within the chroot. Re-running `sbuild-update --keygen` will create the new key types. - Chroots can now have gpg >= 2.x installed as sbuild will properly clean up any remaining gpg-agent processes and "apt-key add" is not used anymore (it will leave a gpg-agent process around that cannot properly be killed). - Add the --source-only-changes option which will create a .changes file suitable for a source-only upload alongside the normal binary .changes file. (closes: #812361) - Do not install debfoster by default in sbuild-createchroot to keep the build chroot as minimal as possible. Users that use debfoster can use the --include option of sbuild-createchroot. - Drop requirement for gpg inside the chroot as external archive keys are now processed without gpg and signing of the internal repository is entirely optional with helpful warning and error messages in case signing failed. (closes: #831462) - Allow running autopkgtest after a successful build in the same manner that piuparts can be run after a successful build. (closes: #824935) - fix uninitialized value problem in loop (closes: #823993) - Fix typo in APT::Get::AllowUnauthenticated config setting (closes: #824165) - Add up correct size when looping over files (closes: #825359) - Make sure printed timestamps are in C locale, in UTC and in standard formats (closes: #813895) - Move addition of extra repositories from the creation of the dummy build dependency repository to the initial setup (closes: #792037) - Fix execution of man (closes: #831063) * Remove patches 0001-lib-Sbuild-ResolverBase.pm-do-not-produce-non-error-.patch and 0001-bin-sbuild-createchroot-fix-chown-chmod-error-checks.patch as they were merged upstream. -- Johannes Schauer Wed, 03 Aug 2016 10:58:48 +0200 sbuild (0.69.0-2) unstable; urgency=medium * add patch 0001-lib-Sbuild-ResolverBase.pm-do-not-produce-non-error-.patch to make sbuild not print on stderr during sbuild-update unless it is an error (closes: #823788) * 0001-bin-sbuild-createchroot-fix-chown-chmod-error-checks.patch which fixes error checking of chown and chmod calls in sbuild-createchroot (closes: #823897) -- Johannes Schauer Thu, 12 May 2016 07:36:32 +0200 sbuild (0.69.0-1) unstable; urgency=medium * new upstream version - Decouple chroot from host in terms of filesystem access to allow chroot backends like qemu, ssh or lxc. Deprecate external command percentage escape %SBUILD_CHROOT_DIR in favour of %SBUILD_CHROOT_EXEC. - Experimental adt backend. Enable with --chroot-mode=adt. Choose the virtualization server with --adt-virt-server and add options with --adt-virt-server-opt. This allows sbuild to use qemu, ssh and lxc chroots. - Build packages without specifying a version. Earlier it was possible to let sbuild "apt-get download" a dsc by specifying "package_version" as a command line argument. The version part is not necessary anymore. No manual version lookup by the user is required anymore. (closes: #693928) - Disallow conflicting command line options, thus making command line switches position independent and remove the deprecated --arch-all-only option in the process. - The aspcud resolver criteria is not hardcoded anymore but can be chosen with --aspcud-criteria. The default criteria is -removed,-changed,-new. To minimize the number of packages from experimental, use: -count(solution,APT-Release:=/a=experimental/),-removed,-changed,-new (closes: #821376) - Apt doesn't download translations anymore. - Dummy archive is now signed with SHA-512 - Cron script etc/sbuild-update-all allows one to periodically update all sbuild chroots. (closes: #776438) - Add another --*-failed-commands external command: --chroot-update-failed-commands (closes: #803505) - Documentation of configuration options in sbuild.conf(5) and in /etc/sbuild/sbuild.conf now reference related command line options from sbuild(1). - Documentation of command line options in sbuild(1) now references the respective configuration options from sbuild.conf(5). - Remove configuration options which can be set on the command line from the __INTERNAL group, thus exposing them in sbuild.conf as well and referencing them in sbuild(1). - Replace single by double quotes in external command (closes: #816493) - Parse "apt-cache showsrc" output using Dpkg::Index (closes: #818579) - Fix permissions of temporary directories (closes: #798835) - Fix signing of build results (closes: #817121) - do not remove architectures when cloned chroot is in use (closes: #811558) - check for overlayfs support (closes: #813360) -- Johannes Schauer Sun, 08 May 2016 14:43:04 +0200 sbuild (0.68.0-1) unstable; urgency=medium * new upstream version - Fix quoting when checking architectures (closes: #809175) - bin/sbuild-createchroot: check for defined-ness first before using eq (closes: #811042) - When cross compiling, install dummy binary package instead of using 'apt-get build-dep'. See upstream commit #e227c8f3 for an extensive rationale. (closes: #809730) - Do architecture check after build-essential is installed (closes: #700317) - Create directory where tarball is stored (closes: #811040) - lib/Sbuild/ChrootInfoSchroot.pm: check if get_info_from_stream() was successful and don't check if closing the pipe was successful if not (closes: #811041) - Extend explanation of --source and --no-source options (closes: #700317) - Add documentation related to generated build artifacts (closes: #782553) - Deprecate command line option --arch-all-only in favour of --arch-all --no-arch-any. This option will be removed in the next upstream release. * drop patch fix-quoting.patch as it has been applied upstream -- Johannes Schauer Fri, 15 Jan 2016 10:18:53 +0100 sbuild (0.67.0-2) unstable; urgency=medium * backport patch fix-quoting.patch (closes: #809175) -- Johannes Schauer Mon, 28 Dec 2015 03:23:42 +0100 sbuild (0.67.0-1) unstable; urgency=medium * fix Vcs-Browser and Vcs-Git fields to point at the debian/unstable branch (closes: #805063) * add Suggests: libwww-perl to libsbuild-perl because it can optionally make use of LWP::UserAgent (closes: #703814) * new upstream version - ./man/sbuild.1.in: improve documentation of external commands (closes: #802678) - bin/sbuild: add --clean-source and --no-clean-source to allow building a package from an unpacked directory without calling debian/rules clean (closes: #655215) - allow changing the user running dpkg-buildpackage inside the chroot (closes: #661037) - Check architecture wildcard matching with dpkg inside the chroot to avoid situations in which dpkg outside the chroot doesn't know about a new architecture yet (closes: #691539) - lib/Sbuild/Build.pm: say --build instead of incorrect --build-arch (closes: #709270) - bin/sbuild-createchroot: honor --foreign (closes: #709864) - man/sbuild-setup.7.in: correct section 8 for sbuild-createchroot and sbuild-adduser (closes: #713033) - Fix permission of public key (closes: #726866) - sbuild-createchroot: use union-type=overlay for directory chroot and promote tarball chroot in the manpage (closes: #751732) - sbuild-createchroot: run debootstrap with --no-check-gpg if --keyring="" is passed (closes: #760832) - Quit processing when external commands fail (closes: #774351) - bin/sbuild-createchroot: check if chroot already exists before creating a new one (closes: #782534) - Print better message when no chroot is specified (closes: #786456) - Add the --no-arch-any and --arch-any options - Successfully handle a source only build. (Closes: #799056) - lib/Sbuild.pm: improve error message about sbuild group membership (closes: #800317) - bin/sbuild: turn path to input dsc or source directory into an absolute path (closes: #801436) - Set [trusted=yes] for internal dummy repository to make key generation optional (closes: #801798) - have a default for CROSSBUILD_CORE_DEPENDS (closes: #806931) - lib/Sbuild/Chroot.pm: apply environment filter *before* setting environment variables set by sbuild itself (closes: #807488) - lib/Sbuild/ChrootInfo.pm: fix error handling (closes: #808290) - lib/Sbuild/Build.pm: make sure regex only matches lines in the Files field (closes: #808560) * drop all patches which have now been applied upstream -- Johannes Schauer Sat, 26 Dec 2015 15:19:29 +0100 sbuild (0.66.0-5) unstable; urgency=medium * Backport commit 6456b3da to make sbuild binary packages reproducible independent of the build architecture and the build user (closes: #801882) -- Johannes Schauer Fri, 16 Oct 2015 07:26:52 +0200 sbuild (0.66.0-4) unstable; urgency=medium * Backport commit 297dc84a fixing a regression in parsing the output of `schroot --info` introduced by commit 8a3e12c3 and leading to sbuild-update not updating the schroot. (closes: #801572) -- Johannes Schauer Wed, 14 Oct 2015 10:32:58 +0200 sbuild (0.66.0-3) unstable; urgency=medium * backport commit 91229d5a calling deps_parse() with build_dep => 1 (closes: #801637, #801400) -- Johannes Schauer Tue, 13 Oct 2015 13:08:47 +0200 sbuild (0.66.0-2) unstable; urgency=medium * make changelog entry for 0.66.0-1 more explicit wrt the closed bugs. -- Johannes Schauer Mon, 05 Oct 2015 09:54:58 +0200 sbuild (0.66.0-1) unstable; urgency=medium * new upstream version * demote exim4 to Recommends (Closes: #774310) * use dpkg --assert-multi-arch to check for multi-arch support (Closes: #793561) * allow to set custom configuration file through $SBUILD_CONFIG environment variable (Closes: #790354) * look for a BUILD_ARCH chroot instead of HOST_ARCH (Closes: #793951) * Move running of pre-build-commands until after 'Chroot Dir' is defined to prevent the %SBUILD_CHROOT_DIR percentage escape being empty when running the pre-build-commands hook (Closes: #774359) * external commands are now unparsed strings (Closes: #782672) * properly setup buildd unstable chroot (Closes: #731062) * Replaced all unicode-printed chars with plain ASCII (Closes: #665847, #765886) * Add --extra-repository-key flag for extra apt keys (Closes: #796539) * Add a new --arch-all-only option (Closes: #657392) * Instead of explicitly requesting core packages of the build architecture, use :native (Closes: #798323) * Report a proper error message in case /var/lib/sbuild inside the chroot is not writable (Closes: #797783) * close and unlink temporary files created by File::Temp::tempfile() (Closes: #775091) * external command %SBUILD_SHELL produces an interactive shell (Closes: #783091) * If Build-Depends can't be parsed, I now error loudly (Closes: #783335) * consider stderr as well as stdout before timeout (Closes: #731940) * make symlink to build log relative if in same directory (Closes: #685416) * Handle $session being undefined properly (Closes: #745851, #798568, #790547) * man/sbuild.1.in: update docs for --dist option (Closes: #783135) * sbuild-createchroot(8): default suffix is -sbuild, not -chroot (Closes: #774521) * Correct inaccurate dpkg Multi-Arch support comment (Closes: #793560) * Fix call to add_foreign_architecture to actually have an effect (Closes: #793359) * Fix crossbuild dependency resolution for apt and aptitude (Closes: #770407) * create ~/.gnupg if it did not exist before when running sbuild-update (Closes: #792100) * use httpredir.debian.org instead of ftp.debian.org or ftp.uk.debian.org (Closes: #792092) * add --build-path option and configuration variable to set a deterministic build path (Closes: #790868) -- Johannes Schauer Sun, 04 Oct 2015 09:50:02 +0200 sbuild (0.65.2-1) unstable; urgency=medium * Team upload. [ Ansgar Burchardt ] * Sort keys in hashes dumped to sbuild.conf and sbuild.conf.man. Thanks to Reiner Herrmann for the patch. (Closes: #778482, #764504) * sbuild-createchroot: set profile=sbuild also for tar-based chroots. (Closes: #769289) [ Aurelien Jarno ] * lib/Sbuild/Build.pm: only list content for deb/udeb files. (Closes: #781075) -- Aurelien Jarno Tue, 24 Mar 2015 14:37:46 +0100 sbuild (0.65.1-1) unstable; urgency=medium * Team upload. [ Roger Leigh ] * Sbuild::Build: Build arch-all packages when other architectures are present in the arch list (Closes: #771235). Thanks to Lennart Sorensen for this patch. [ Ansgar Burchardt ] * Handle :native architecture qualifier in build dependencies. Thanks to Johannes Schauer for the patch. (Closes: #777204) * Merge most changes from Debian's buildd-0.64 branch. -- Ansgar Burchardt Tue, 24 Feb 2015 22:53:16 +0100 sbuild (0.65.0-1) unstable; urgency=medium [ Benjamin Drung ] * Team upload. * Fix various issues found by Lintian: - Fix spelling mistake: indended -> intended - Fix hyphen-used-as-minus-sign - Fix debian-news-entry-uses-asterisk - Fix copyright-refers-to-symlink-license - Use canonical VCS fields * Export additional variables to external commands: %SBUILD_CHROOT_DIR, %SBUILD_BUILD_DIR, %SBUILD_PKGBUILD_DIR, and %SBUILD_HOST_ARCH (Closes: #756265) * Bump Standard-Version to 3.9.6 * Unset typical desktop variables XDG_RUNTIME_DIR, XDG_SEAT, XDG_SESSION_COOKIE, XDG_SESSION_ID, and XDG_VTNR (Closes: #729012) * Fail if dpkg subcommands fail instead of silently ignoring failures. Thanks to Christoph Biedl for the patch (Closes: #745221) * Fix build failure if the package version ends with Debian revision 0. Thanks to Adam Borowski (Closes: #679574) * Fix broken man page symlinks in buildd package [ Geoffrey Thomas ] * Refactor temporary build-dep repository code to use apt-get update, instead of hacking /var/lib/apt/lists. * Add --extra-package (Closes: #700522) and --extra-repository (Closes: #714883). * Accept 0 as a source version number (Closes: #712627) * Add DEP-8 autopkgtest to build procenv. (Closes: #705926) [ Johannes Schauer ] * sbuild: - Add build-profiles support (Closes: 731798) [ Geoffrey Thomas ] * Sbuild::ChrootSetup: Pass --no-options to gpg (Closes: #722103) -- Wookey Fri, 17 Oct 2014 17:20:45 +0100 sbuild (0.64.3-2) unstable; urgency=medium * Ensure foreign-arch logging is correct (Closes: #763635) -- Wookey Wed, 01 Oct 2014 17:32:42 +0100 sbuild (0.64.3-1) unstable; urgency=medium * Team upload [ Wookey ] * sbuild: - Add support for multiarch builds (enable foreign arch 'arch' if Build-Depends includes specific foo:arch dependency) - Enable chroot setup commands to be run as root (Closes: #608840,#607228) - Document command hooks - Add Wookey to sbuild team/uploaders [ Johannes Schauer ] * sbuild: - Add starting-/finished- build-commands hooks (Closes: #760991) -- Wookey Sat, 20 Sep 2014 00:38:58 +0100 sbuild (0.64.2-1) unstable; urgency=low * Team upload. [ Colin Watson ] * buildd: - Unset some more locale environment variables, and sort these in the same order as the output of locale(1), to make it easier to compare visually. [ Luca Falavigna ] * sbuild-createchroot: - Allow to define custom suffixes in chroot names (Closes: #741727). - Allow to Define custom debootstrap variant (Closes: #715020). [ Christoph Biedl ] * lib/Sbuild/Build.pm: - Sort output of package content listing (Closes: #743773). -- Luca Falavigna Fri, 12 Sep 2014 20:02:46 +0200 sbuild (0.64.1-1) unstable; urgency=low [ Roger Leigh ] * New release. * sbuild: - sbuild-createchroot now works with perl 5.18 (Closes: #724858). Thanks to Alexander Chernyakhovsky for this patch, which corrects the use of File::Temp. Thanks also to Paul Elliott and Václav Ovsík who also provided an equivalent patches. - Sbuild::Conf: Add missing File::Spec (Closes: #722012). Thanks to Václav Ovsík for this patch. - Sbuild::Build: Remove perl 5.10 autoflush workaround; flushing works correctly wih perl 5.18. -- Roger Leigh Sun, 13 Oct 2013 19:35:57 +0100 sbuild (0.64.0-1) unstable; urgency=low [ Thorsten Glaser ] * Apply patch from Arnaud Patard to fix the uploader (Closes: #636477). * Make sample configuration entries actually work (Closes: #696840). * Avoid using undef as HASH reference (Closes: #696841). [ Philipp Kern ] * Forward port patches from the buildd-0.61.0 branch: - Buildd::Client: Don't change the cwd. - Buildd: Fix SSH control master restart. [ Roger Leigh ] * New release. * Upgrade to Standards-Version 3.9.4 (no changes). * buildd: - Remove duplicate stop action from init script (Closes: #695513). - Failure count before sleeping is configurable with MAX_SBUILD_FAILS (Closes: #693790). - buildd.init specifies correct Required-Stop dependencies. - Remove empty preinst script. * sbuild: - Cross build-dependency installation failure throws an exception (Closes: #693788). - In Sbuild::ResolverBase, pass the correct options to deps_parse for cross-building and foo:native build dependencies (Closes: #697298). Thanks to Colin Watson for this patch. - In Sbuild::Build::copy_to_chroot, remove stray exit() which could cause sbuild to hang with a "Failed to copy" error (Closes: #699903). Thanks to Stephan Sürken for this patch. - Compute changes path correctly, to allow “--debbuildopt=-A” to work correctly with _all.changes (Closes: #686509). Thanks to Daniel Dehennin for the original version of this patch. - Run lintian from inside the chroot (Closes: #626361). Thanks to Reinhard Tartler for this patch. [ Colin Watson ] * sbuild: - Resolve cross-build-dependencies from package being built rather than from current apt sources (Closes: #695203). * buildd: - Reset sbuild failure count after sleeping. [ Adam Conrad ] * sbuild: - Improve cross chroot detection to look for $dist-$build-$host as a valid chroot for cross-build to avoid namespace clashes with native chroots, and document this better in the manpage (Closes: #695273) [ Geoffrey Thomas ] * sbuild: - When creating a changelog entry for binNMUs or --append-to-version, tag it with "binary-only=yes" so that dpkg-gencontrol uses the previous changelog entry for the source version (Closes: #672711, #681292). -- Roger Leigh Fri, 17 May 2013 23:06:13 +0100 sbuild (0.63.2-1.1) unstable; urgency=low * Non-maintainer upload. * Fix building packages with revision "0" (Closes: #687396) -- Roland Stigge Wed, 05 Dec 2012 14:44:45 +0100 sbuild (0.63.2-1) unstable; urgency=low [ Roger Leigh ] * New release. * Sbuild::Conf: Fix typo sucess (Closes: #663089). * Sbuild::Options: - Add --no-run-lintian and --no-run-piuparts options (Closes: #665372). If lintian or piuparts are configured to run automatically following a successful build, there options disable this behaviour for the build. - Add --purge-build option (Closes: #629109). This behaves identically to the old --purge option. --purge now purges everything (build directory, build dependencies and schroot session) and is equivalent to using --purge-build, --purge-deps and --purge-session together. Thanks to Jan-Marek Glogowski for this patch. * Sbuild::Conf: - Don't create the log directory unless logging is enabled or using buildd mode (Closes: #673009). * Sbuild::Build: - Don't pass $key_id to the shell unescaped (Closes: #676475). - Use _all.changes rather than _arch.changes if -A is passed to dpkg-buildpackage (Closes: #674669). Thanks to Daniel Dehennin for this patch. * Sbuild::Utility: Fix logging in download function (Closes: #637931). * sbuild: - If running sbuild from inside a build tree (like dpkg-buildpackage), place the build logs outside the tree (Closes: #676834). Logs will be created in '..' rather than '.'. - When packing source trees with "dpkg-source -b", always pass "." as the directory to pack, so the orig.tar can be found (Closes: #662785). * sbuild-createchroot: - Use profile=sbuild in place of script-config= in generated schroot.conf configuration (Closes: #665215, #675861). - Don't pass --keyring to dpkg-buildpackage unless explicitly set by the user (Closes: #673676). -- Roger Leigh Sat, 18 Aug 2012 13:46:45 +0100 sbuild (0.63.1-1) unstable; urgency=low [ Roger Leigh ] * New release. * Don't require xapt. Remove duplicate and incorrect check. Thanks to Andres Mejia and Jakub Wilk (Closes: #675332, #675354). * Remove /etc/schroot/setup.d/99builddsourceslist which was provided with earlier versions of sbuild, but no longer works with current schroot versions (Closes: #675349). -- Roger Leigh Thu, 31 May 2012 21:59:16 +0100 sbuild (0.63.0-1) unstable; urgency=low [ Wookey ] * Support for cross-compiling has been added. This includes the addition of $host and $build configuration variables, with corresponding --host and --build command-line options. This includes the addition of a new 'xapt' dependency resolver. - Merge cross-build support (thanks to Hector Oron, Closes: #610689). - Add multiarch cross-build support. [ Roger Leigh ] * The deprecated 'internal' dependency resolver has been removed, along with the configuration variables $apt_policy, $check_depends_algorithm and $resolve_virtual, and the command-line option --check-depends-algorithm. The 'apt' resolver is the default replacement for 'internal'. (Closes: #622788) * Support for watches has been removed. The configuration variables $check_watches, $ignore_watches_no_build_deps and $watches (and obsolete variables @ignore_watches_no_build_deps and %watches) have also been removed. * sbuild-stats and support for build time and space statistics recording has been removed. These statistics are recorded in both the build log and are available as build metadata internally. The statistics recorded in the database were not particularly informative; storing the statistics in a proper relational database is recommended. The configuration variables $avg_time_db and $avg_space_db have been removed. * Drop 25nssdatabases schroot setup script used on compatibility mode (on buildds). This has been replaced by the schroot 20nssdatabases for many years. -- Roger Leigh Wed, 30 May 2012 22:49:18 +0100 sbuild (0.62.6-1) unstable; urgency=low * New release. * All changes backported from buildd-0.61.0 branch. * sbuild.1: Add --chroot to synopsis (Closes: #635203). * sbuild: - --jobs is an alias for -j, to match documented behaviour (Closes: #635250). - The use of alternatives in Build-Depends and Build-Depends-Indep may be turned on or off by the configuration variable $resolve_alternatives. It may also be enabled or disabled at build time using the --resolve-alternatives and --no-resolve-alternatives options, respectively. - Correctly support chroot namespaces, to work with schroot 1.5.x (Closes: #612630). - Support Build-Depends-Arch and Build-Conflicts-Arch fields in debian/control. These may be manually set with --add-depends-arch and --add-conflicts-arch, respectively. -- Roger Leigh Wed, 07 Dec 2011 20:41:43 +0000 sbuild (0.62.5-1) unstable; urgency=low * New release. * sbuild: - Correct use of Dpkg::Version for version parsing, to ensure correct behaviour when using native package versions and epochs. - Don't require an exact version when building a package directly from a source tree. -- Roger Leigh Wed, 13 Jul 2011 19:56:05 +0100 sbuild (0.62.4-1) unstable; urgency=low * New release. * sbuild: - Failing lintian checks are highlighted in red, and passes in green (Closes: #631060). - The distribution in the build summary is coloured yellow if it does not match the distribution in the changelog. This is to indicate that there may be a potential problem, such as potentially uploading a package intended for experimental to unstable by building for unstable by accident. - lintian test results are also coloured to highlight success and failure. - Log colouring may now be disabled using $log_colour. - sbuild only permits building one source package at once. Previously sbuild would allow building of more than one package in a single invocation. Making this change means that the exit status will always be the status of the build rather than the last build, and it also means the logging is simplified and may be started earlier. - Now that the main log has been removed, and packing of a source tree takes place before starting the build for real, we no longer create a log file in the build tree, confusing "dpkg-source -b" (Closes: #612324). - Added new directory /var/lib/sbuild/build to hold build trees for sbuild when building. This will be bind mounted on /build inside the chroot following an update to the schroot sbuild and buildd fstab configuration for schroot. This saves significant amounts of space when using LVM snapshot chroots, and it also makes it easier to preserve build trees for failing builds when using snapshots. - Extra environment variables to be set when running dpkg-buildpackage may now be set using $build_environment (Closes: #631595). These variables will supplement the existing environment (e.g. PATH, LD_LIBRARY_PATH), and will not be subject to filtering with $environment_filter. - Existing hard-coded .dsc/.changes/dpkg-parsechangelog parsing has been replaced with use of Dpkg::Control. Existing reimplmentation of the dpkg version comparison and regexes to split versions into epoch/version/revision have been replaced with use of Dpkg::Version. * sbuild-adduser: Use current sbuild-update options in example (Closes: #630791). -- Roger Leigh Sat, 25 Jun 2011 11:39:44 +0100 sbuild (0.62.3-1) unstable; urgency=low * New release. * sbuild: - The apt and internal resolvers will resolve some alternatives even when resolving alternative dependencies is disabled (Closes: #622832). For relations involving the same package, the alternative will be permitted when the package names are the same for each alternative. For example, foo (<< x) | foo (>= y) | bar will be reduced to foo (<< x) | foo (>= y) while foo | bar will be reduced to foo - The sbuild-schroot wrapper program has been removed; sbuild is now an arch-all package again. - Move lock directory to /var/lib/sbuild/chroot-lock, rather than using /var/lock/sbuild which could be a symlink to /run/lock on the host (Closes: #626826). This means parallel builds won't block due to sharing the same lockfile. - Remove schroot buildd profile. This will now be provided by the schroot package itself directly. This requires schroot 1.4.22 or greater. - Add lintian and piuparts results to build summary (Closes: #617450). - Remove directory correctly in postrm (Closes: #627641). Thanks to Daniel Baumann. - Lock sbuild account on purge, and unlock on install (Closes: #619892). - Add -j option to run parallel builds (Closes: #626357). - Log build environment prior to starting a build. This will be useful in diagnosing problems with a misconfigured chroot, such as missing HOME which can lead to misbuilds. * sbuild-createchroot: - Don't call ChrootSetup::basesetup after initial bootstrap; wait until actually running sbuild. The users and groups used for chown don't exist at this point, leading to (harmless) failure. Closes: #622735. - Don't overwrite existing symlinks under /etc/sbuild/chroot (Closes: #608416). * sbuild-update: - Don't try to end the current chroot session if a signal is received and no session is in progress (Closes: #629005). * buildd: - init script starts buildd in runlevels 2-5 rather than S, and stops in 0, 1 and 6. - Lock buildd account on purge, and unlock on install. * buildd-mail: - Remove empty newline from .changes (Closes: #627854). ftp-master started refusing .changes files which have a trailing empty line (after the GPG end of signature). It happens that mutt introduces one when signing GPG in traditional mode. Other tools probably do too. buildd-mail-wrapper should probably drop it automatically. Thanks to Samuel Thibault. -- Roger Leigh Sat, 04 Jun 2011 00:01:13 +0100 sbuild (0.62.2-1) unstable; urgency=low * New release. * sbuild: - New options --no-apt-clean, --no-apt-update, --no-apt-upgrade and --no-apt-distupgrade have been added to allow these actions to be disabled even when set as the default in the configuration. - root is not required to be a member of the sbuild group in order to run schroot via the sbuild-schroot wrapper (Closes: #619128, #619002). - Don't require HOME to be set in the environment (Closes: #619288). - Work around broken build-essential on Ubuntu Lucid (Closes: #619526). Thanks to Marc Deslauriers. - --keep-session is replaced by --purge-session=(always|successful|never). This will allow the session to be purged for all, successful and no builds, respectively (Closes: #619332). - sources.list fragments stored in /etc/apt/sources.list.d have 0644 permissions, so that normal users can run apt-cache in the chroot during a build (Closes: #620797). Thanks to Julian Andres Klode for identifying this problem. - Log filtering may be disabled using $log_filter = 0 in the configuration (Closes: #620589). The replacement text is now also surrounded with "«" and "»" so that strings such as CHROOT and BUILDDIR can't be confused with any actual appearance of the same string in the build log. - Log colouring may be disabled using $log_colour = 0 in the configuration. - Improve binNMU handling to permit binNMUs for multiarch packages (Closes: #620112). Currently, binary NMUs use the current date in the new changelog entry, but co-installable packages require an identical changelog. To avoid this, take the date from the previous changelog entry to ensure the same date for all binNMUs. Thanks to Anders Kaseorg for this patch. - Abort early if maintainer is not defined when performing a binNMU or appending a version suffix (Closes: #620758). * sbuild.conf: - Don't set a default value for $build_dir (Closes: #619416). This value is set each run, and so varies between builds when generating the configuration file. Exclude from the generated output to prevent unnecessary differences between builds. - $purge_session uses the same purge modes as $purge_build_deps and $purge_build_directory, rather than a boolean value. * buildd: - Merge latest changes from buildd-0.61.0. -- Roger Leigh Tue, 05 Apr 2011 10:46:49 +0100 sbuild (0.62.1-1) unstable; urgency=high * New release. * Fixed security issue in the sbuild-schroot wrapper program which did not enforce sbuild group membership in order to allow users to access the chroots as user sbuild. -- Roger Leigh Sun, 20 Mar 2011 23:06:52 +0000 sbuild (0.62.0-1) unstable; urgency=low * New release. * debian/control: - Build-Depend upon libexception-class-perl. * sbuild: - Resolvers: + 'apt' is now the default build dependency resolver. Users should not see any significant changes compared with the old 'internal' resolver. Please note that you may need to generate a GPG key for the local archive created for dependency package installation, if one does not already exist; see sbuild-update (--keygen) for further details. + The 'internal' build dependency resolver is deprecated. It is not recommended for future use, and will be removed once it is no longer used by the buildd infrastructure. Please use the 'apt' resolver as a drop-in replacement. + The 'aptitude' build dependency resolver will, unlike 'apt' and 'internal', consider alternative dependencies by default, rather than only using the first alternative. This is intended to both preserve backward compatibility, and make the 'aptitude' resolver the preferred choice for more complex situations, such as building for experimental. + The aptitude resolver can resolve complex dependencies, e.g. A | B, where A is uninstallable now correctly falls back to B. This is not the case for the internal or apt resolvers, which by intent do not make use of alternatives (they use the first alternative only. sbuild now has full support for resolving alternatives, but this is not the default behaviour (Closes: #403246). Please see #614807 for a proposed description of autobuilder-imposed build dependency restrictions in Policy. + All build dependency resolvers run dpkg with --force-confold. This means packages with modified conffiles in the chroot to not cause build failure. This includes /etc/services and /etc/protocols from netbase (Closes: #576508). - Logging: + Long paths such as the chroot location and the build directory inside the chroot are now filtered in the build log and replaced with small, constant, abbreviations (Closes: #605763). This makes the build logs comparable between builds with tools such as diff(1). + Logging messages have been improved, and important messages are now coloured when running interactively (does not affect log files). Errors, warnings and informational messages are coloured red, yellow and green, respectively. Build status is coloured green for success and red for all failure conditions. + Build log mails are now compressed and mailed in MIME format by default, together with a copy of the .changes file. The old behaviour (plain mailing of uncompressed logs) may be restored by setting $mime_build_log_mails=0 in the configuration, and compression may also be disabled in the MIME mails by setting $compress_build_log_mails=0. Note that it is no longer possible to send compressed log mails unless MIME mailing is enabled. Thanks to Philipp Kern for implementing this. - Error handling: + In order to handle errors more robustly, the build code now has initial support for exception handling. Normal operation will not be affected, but fatal errors may be logged in a different order than seen previously. Fatal errors will now be seen at the end of the build log, which should make it easier to spot problems. + sbuild now always cleans up fully when receiving a termination signal such as SIGINT or SIGTERM. Note that you may need to wait while the cleanup actions are performed, or the current task is completed prior to initiating cleanup. When running interactively, hitting Ctrl-C will sent SIGINT to the entire process group; doing this while apt-get or aptitude are running will potentially leave dpkg in an inconsistent state, so aborting at this point is not recommended. Sending a SIGTERM to the sbuild process will always work cleanly. - General: + sbuild now performs an apt dist-upgrade at the start of each build by default, rather than an upgrade. This is to reduce the amount of manual administration required to keep chroots up to date, and is not much more risky than upgrade in this context. + A new option, --keep-session, has been added (Closes: #609658). This prevents the automatic removal of session-managed snapshot chroots. Previously, snapshots would not be deleted if purging of the build directory or build dependencies was disabled, but this was not always desirable, hence it is now configurable separately. + Internally, building and other actions in the chroot are performed by the 'sbuild' system user, where previously the user invoking sbuild would be used instead. The aim of this change is to separate privileges to increase security and reduce the chance of accidental or deliberate tampering of the build environment. While the latter is not addressed by these changes, this will be taken care of during future architectural changes. + The sbuild package build directory created inside the chroot now has a reduced name length. It's now /build/packagename-XXXXXX where XXXXXX are random characters. This helps reduce the chance of hitting path length restrictions on some architectures, particularly when using sockets. * wanna-build: - The wanna-build database has been removed entirely. This part of the sbuild package was not used, and was not maintained for some time. Users wishing to use wanna-build should investigate the version in the wanna-build.git repository used by the Debian autobuilding infrastructure. This version is actively maintained and in continual use. * sbuild.conf: - sbuild.conf is now automatically generated from the help text and defaults in the source code. This means that the examples will always be syntactically correct, the help text will always be current, and the defaults will always match the defaults in the source code (Closes: #609932, #610995). - Non-scalar (or reference) types are deprecated in sbuild.conf. This is because it is not possible to tell the difference between an empty and an undefined value. Values using array or hash types should use the equivalent array reference or hash reference, which have been supported for some time. The old style array and hash values will remain supported for now, but will be removed in a future release. * buildd.conf: - Automatically generated like sbuild.conf. As for sbuild.conf, non-scalar types are deprecated. * sbuild.conf.5: - All of the allowed values in sbuild.conf are now documented in a new sbuild.conf(5) manual page. Like sbuild.conf, this is entirely generated from the source code, so will always match the defaults for the same sbuild version. * buildd.conf.5: - New manual page. Like sbuild.conf(5), this documents all allowed values. -- Roger Leigh Wed, 16 Mar 2011 16:10:31 +0000 sbuild (0.61.0-1) unstable; urgency=low * sbuild: - The apt and aptitude build dependency resolvers now use only the first alternative in alternative dependencies. The other alternatives are stripped out entirely. This makes the apt and aptitude resolvers behave exactly like the internal resolver. Note that this is configurable with the $resolve_alternatives option, so alternative resolving may be re-enabled with this option if desired. This is useful for e.g. backports, but not for unstable where the strict consistency and reproducibility offered by only using the first alternative is required. - The aptitude resolver now runs dpkg with --force-confold, to match the behaviour of internal and apt. This prevents failure when installing netbase into the build chroot, for example. -- Roger Leigh Wed, 23 Feb 2011 13:08:58 +0000 sbuild (0.60.9-1) unstable; urgency=low * New release. * sbuild: - Don't automatically generate local archive signing key if missing (Closes: #607945). If missing, abort build with an error message and instructions for how to generate the key. - Do not filter out environment variables starting with DEBIAN_ by default (Closes: #608659). Thanks to Modestas Vainius. - Do not filter out PATH environment variable (Closes: #610997). Note this is not the user's PATH, but the $path in sbuild.conf. - Aptitude resolver defines a custom SolutionCost in order to improve resolver behaviour (Closes: #608789). Thanks to Modestas Vainius. - When running apt-get, use "-o APT::Install-Recommends=false" rather than "--no-install-recommends" in order to support older releases (Closes: #609811). Thanks to Marc Deslauriers. - Purging the package removes generated files in /etc/sbuild/chroot and /var/lib/sbuild (Closes: #608412). - The architecture specified with --arch (defaulting to the host system architecture) must match the chroot architecture (Closes: #609151). This was previously allowed to be superceded by the chroot architecture. This change is to avoid any abiguity regarding the host/build architecture for the package being built. - Add --no-arch-all option to force not building arch-all packages (Closes: #613401). Thanks to Sebastian Harl for this patch. * sbuild-createchroot: - Use less restrictive permissions on chroot directory and schroot configuration file (Closes: #608414). The chroot now has 0755 permissions, and the schroot configuration 0644. - Don't require sudo access (Closes: #608429). The Sbuild::ChrootPlain module used to run commands inside the newly- created chroot was using sudo to run commands when already running as root. sudo is no longer used when root. - Remove use statement which prevented command-line options being registered (Closes: #610007, #607606). Command-line options now work correctly. * sbuild.conf: - $environment filter is syntactically correct (Closes: #610997). Thanks to Jakub Wilk. - $apt_allow_unauthenticated is documented to use apt-secure(8) (Closes: #608971). * sbuild.1: - Document the temporary local archive used by the apt and aptitude build dependency resolvers to store and install dummy dependency packages (Closes: #608972). -- Roger Leigh Mon, 14 Feb 2011 20:37:05 +0000 sbuild (0.60.8-1) unstable; urgency=low * New release. * sbuild: - Don't use user's default GPG configuration and keyrings for signing archives; use sbuild archive signing keys only (Closes: #606668). Thanks to Simon McVittie for this patch. - Use an empty directory as GPG homedir. - Don't run "apt-get update" to update local archive; copy files directly into /var/lib/apt/lists. This means the remote mirror lists can't be updated during a build, and it also saves the time needed to update the lists an additional two times. -- Roger Leigh Sun, 12 Dec 2010 19:24:11 +0000 sbuild (0.60.7-1) unstable; urgency=low * New release. * Correct building of dependency package using the apt and aptitude resolver, where /tmp is not shared with the host (Closes: #606278). -- Roger Leigh Wed, 08 Dec 2010 21:47:11 +0000 sbuild (0.60.6-1) unstable; urgency=low [ Roger Leigh ] * New release. * sbuild: - sbuild now sanitises its environment when running external commands. - sbuild no longer generates the files REDO and SBUILD-REDO-DUMPED. - sbuild now has a testsuite. - apt and aptitude build-dependency resolvers now use a local apt archive, which improves the behaviour of the apt resolver (the dependency package will no longer be removed in some situations). - Workaround uninstallable sysvinit on Ubuntu, where sysvinit is still present in the build-essential package list. Thanks to Jamie Strandboge. * sbuild-update: - sbuild-update works on multiple chroots (Closes: #604715). - sbuild-update works with multiple architectures (Closes: #606001). Thanks to Ansgar Burchardt for this patch. - sbuild-update now has a --keygen option to generate signing keys for temporary apt archives. * sbuild.1: Update description of --maintainer (Closes: #605745). Thanks to Jakub Wilk. * Sbuild::ConfBase: Only use MAILTO_HASH if defined (Closes: #589615). Thanks to Marc Dequènes for this patch. [ Modestas Vainius ] * sbuild: - Do not skip purging of build directory if chroot is cloned (Closes: #605997). This is necessary if /build in chroots is (bind-)mounted to the outside of the session. However, if /build is part of the cloned session, $purge_build_directory='never' could be used in order to avoid wasting time when the session ends. -- Roger Leigh Tue, 07 Dec 2010 21:08:28 +0000 sbuild (0.60.5-1) unstable; urgency=low * Chroot upgrade and dist-upgrade commands run with "dpkg --force-confold" as done for build dependency installation (Closes: #603397). Thanks to Loïc Minier. -- Roger Leigh Sat, 13 Nov 2010 18:43:25 +0000 sbuild (0.60.4-1) unstable; urgency=low * New release. * Allow the user to specify chroot namespaces in the distribution name (Closes: #602789). * Revert default build dependency resolver to 'internal' for the time being. -- Roger Leigh Tue, 09 Nov 2010 19:46:38 +0000 sbuild (0.60.3-1) unstable; urgency=low * New release. * sbuild-createchroot: - Allow direct creation of tarballs from chroots, with various options for compression (Closes: #545215). Thanks to Andres Mejia. * sbuild-update: - sbuild-clean functionality has been merged into sbuild-update. Thanks to Andres Mejia. * sbuild: - Dependency resolving: . 'aptitude' is now the default dependency resolver. Users wishing to use the old resolver should set $build_dep_resolver='internal' in their configuration. . The aptitude resolver can resolve complex dependencies. A | B, where A is uninstallable now correctly falls back to B (Closes: #403246). . Removal of Build-Conflicts now works, due to using apt-get or aptitude to perform the removal (Closes: #464376). . Default to not enabling virtual dependency resolving with the internal resolver ($resolve_virtual=0). This is to avoid changing the historical behaviour by default. - Don't set Sbuild::debug_level to undef (Closes: #602318). Thanks to Andres Mejia. - Add debuild-like feature to run sbuild on an unpacked source tree (Closes: #551311). In addition to specifying a package version to build, or a source package .dsc, a directory may be used. This will be packaged with 'dpkg-source -b' prior to building. Thanks to Andres Mejia. - Add support for running lintian after a build. Thanks to Andres Mejia. - Add support for running external commands before and after a build, and during chroot setup and cleanup. These may be used to run piuparts, for example. Thanks to Andres Mejia. * Run sbuild-* chroot maintenance commands in the 'source' chroot namespace for chroots providing such a facility (Closes: #567505). This means that update/distupgrade etc. operations will occur in the source volume for lvm-snapshot and btrfs-snapshot chroot types. Note that the sbuild chroot lock (/var/lock/sbuild) may be copied into cloned chroots if a build is started during a maintenance operation and the build will block until the operation is completed. -- Roger Leigh Mon, 08 Nov 2010 17:07:40 +0000 sbuild (0.60.2-1) unstable; urgency=low * New release. * sbuild: - Dependency resolving: . The aptitude build dependency resolver now sets Aptitude::CmdLine::Ignore-Trust-Violations based upon the $apt_allow_unauthenticated option (Closes: #588035). Thanks to Ansgar Burchardt for this patch. . Improve handling of alternative build dependencies and Provides using the interal build dependency resolver. (Closes: #586275, #578810, #591187, #591188, #591189, #595863, #595866, #595872). Thanks to Ansgar Burchardt for this patch. . Remove virtual build-dependency resolving using the "internal" resolver using the static ALTERATIVES (%alternatives) list. This was already limited, non-functional, and is obsoleted by the "aptitude" resolver. . Added the ability to resolve virtual dependencies using the "internal" build dependency resolver by calling "apt-cache --names-only" to get candidate packages to satisfy the dependency. The first package (sorted alphabetically) is chosen (Closes: #595934). This may be disabled using the $resolve_virtual option. . Use apt-get to remove build conflicts using the internal resolver and correctly reinstall post build. - Log the package source version as well as binary version in the package build log, since these may differ when making binNMUs (Closes: #569823). - Always attempt to install ESSENTIAL (build-essential) packages if they aren't already installed (Closes: #380113). - Don't end session on build failure (Closes: #567506). This allows examination of build trees and cloned chroots on build failure, rather than unconditionally deleting them, which prevents this. Thanks to Jan-Marek Glogowski. - Remove support for parsing output of apt-get stderr (Closes: #571806). - Check for sbuild group membership using gid and supplementary groups (Closes: #599350). * buildd: - Read entire contents of pipes (Closes: #567821). Thanks to Samuel Thibault. This ensures receipt of complete log messages. - Replace/Breaks with ubuntu-dev-tools <= 0.83 (Closes: #590153). Thanks to Lorenzo De Liso. * buildd-vlog: Fix breakage (Closes: #567822). Thanks to Samuel Thibault. This fix introduces sleeps, and is not a complete or entirely optimal fix, but corrects the existing breakage. * Documentation: - Remove trailing 'q' from sbuild-createchroot(8) manual page (Closes: #579971). Thanks to Salvatore Bonaccorso. - sbuild(1): . Remove and rewrite obsolete parts of the manpage (Closes: #599348). . .sbuildrc is no longer required for sbuild to function (Closes: #598054). -- Roger Leigh Tue, 02 Nov 2010 13:02:50 +0000 sbuild (0.60.1-1) unstable; urgency=low * New release. * debian/control: - Upgrade to Standards-Version 3.9.1. * sbuild: - Add --no-source option (Closes: #571726). Thanks to David Bremner for this suggestion. - Hint aptitude to produce better solutions in AptitudeBuildDepSatisfier. Thanks to Modestas Vainius. (Closes: #570463) - AptitudeBuildDepSatisfier: Handle the case when default negative dep is not available gracefully. Thanks to Modestas Vainius. (Closes: #571565). - Improve support for aptitude. - Set DEBIAN_FRONTEND=noninteractive when using aptitude (Closes: #588818). - Improve dpkg-source v3 source format handling. Don't hard-code assumptions about how the source files are named (Closes: #559533). - Remove conflict with schroot from oldstable. * buildd: - Retry the current suite if --take fails. (Closes: #570463) * buildd-uploader: - Don't remove the uploader lock if not already the owner Closes: #591620). Thanks to Sebastian Andrzej Siewior. * libsbuild-perl: - depend on schroot 1.4.0 or greater due to sbuild-createchroot creating schroot.conf fragments with 1.4.x-specific features. -- Roger Leigh Sun, 24 Oct 2010 19:56:34 +0100 sbuild (0.60.0-1) unstable; urgency=low * debian/control: - Upgrade to Standards-Version 3.8.4. - Use ${misc:Depends} as required by debhelper. * sbuild: - Only run "schroot --info" once on startup, to speed up the startup time when many chroots exist (Closes: #546624). Thanks to Nelson Elhage for finding this issue and suggesting a suitable approach for fixing it. - Don't append binNMU or extra version to version number for use in the DSC filename (Closes: #546647). Thanks to Nelson Elhage for finding this issue. - Distinguish between failed/attempted builds (Closes: #538083). - Build directory cleaned under all failure conditions (Closes: #538085). - Flush stdout explicitly in logger to avoid "choppy" output when monitoring interactively. Autoflushing stdout appears to be broken in Perl 5.10 so flush explicitly in addition to enabling autoflush. Thanks to Ryan Niebur for spotting this. - Print a list of all installed packages and versions, in addition to toolchain packages (Closes: #553301). Thanks to Felipe Sateler for this suggestion. - Don't default distribution to unstable (Closes: #559659). Defaulting to unstable can result in unintentional uploads of packages targetted at other distributions, such as experimental, which can potentially cause serious breakage. As a result, it is safer to require manually specifying the distribution, or explicitly setting it in the configuration file. - Set the man-db man-db/auto-update parameter to false to disable unnecessary work in a build environment. - Don't give back packages failing the arch check (Closes: #561936). Thanks to Philipp Kern for reporting this. - Add command-line and configuration options to enable running apt-get clean, upgrade and dist-upgrade prior to building. These complement the existing option to update the chroot, which is now also fixed (Closes: #521096). - Add $build_source variable to sbuild.conf to complement the --source command-line options (Closes: #564528). Thanks to David Bremner for this suggestion. - Allow setting of $build_dir in sbuild.conf (Closes: #535911). Thanks to Andres Mejia for this patch. - Add $check_space option to allow free space checking to be disabled (Closes: #551917). Thanks to Bruno Kleinert for this suggestion. - --apt-update both updates and upgrades the chroot (Closes: #521096). Thanks to Gustavo Noronha Silva for this patch. Note the original bug report 'get_apt_command' error was fixed on the 17th March 2009. - Allow the use of -C as well as --check-depends-algorithm as documented (Closes: #546673). Thanks to Nelson Elhage for this patch. * Add sbuild-clean script (Closes: #551310). Thanks to Andres Mejia for this patch. * sbuild-createchroot: Compute an absolute path for the chroot location. Thanks to Cyril Brulebois for this patch. * wanna-build: - Depend on postgresql-8.4-debversion in place of postgresql-8.3-debversion (Closes: #559607). Thanks to Martin Pitt for reporting this. - wanna-build now reads its system configuration from the correct location (/etc/buildd/wanna-build.conf, not /etc/wanna-build/wanna-build.conf). - Remove extra parenthesis from wanna-build-merge-packages (Closes: #553364). Thanks to Felipe Sateler for this patch. * Remove absent -t option for --top from sbuild-stats.1 (Closes: #566320). Thanks to Kurt Roeckx. * buildd: - Don't bind-mount /home into the schroot. (Closes: #566315) - Extract architecture for .changes filename from the .changes file instead of just using the system arch. (Closes: #566398) - Fix NO_WARN_PATTERN default to not warn about sbuilds build/current-* symlinks. (Closes: #566722) - Do all w-b interaction, leave nothing of it to sbuild. (Closes: #567646, #566321) -- Roger Leigh Tue, 23 Feb 2010 22:24:52 +0000 sbuild (0.59.0-1) unstable; urgency=low [ Roger Leigh ] * New release. * Use version comparison functions in WannaBuild::Database (Closes: #521486). Thanks to Florian Weimer. * WannaBuild::Database: Allow whitespace in Architecture field (Closes: #535415). Thanks to John Wright for this patch. * Sbuild::Build, WannaBuild::Database: Add support for architecture aliases/wildcards (Closes: #501230). Thanks to Andres Mejia for these patches. * Sbuild::Conf doesn't require STATS_DIR to exist, and Sbuild::Build::write_stats only uses STATS_DIR in batch mode (Closes: #539570). -- Roger Leigh Sun, 02 Aug 2009 11:15:26 +0100 sbuild (0.58.6-1) unstable; urgency=low [ Roger Leigh ] * New release. * debian/control: Update package descriptions to use correct English in full sentences (Closes: #531022). Thanks to Gerfried Fuchs for pointing this out. * Don't include Epoch in DSC filename (Closes: #529786). Thanks to Gustavo Noronha Silva for spotting this. -- Roger Leigh Sat, 20 Jun 2009 10:48:45 +0100 sbuild (0.58.5-1) unstable; urgency=low [ Roger Leigh ] * New release. * Install README.Debian in sbuild package (rename to debian/sbuild.README.Debian, Closes: #533029). * debian/sbuild.install: Don't install Perl modules, which should only be included in libsbuild-perl (Closes: #533143). * debian/control: - libsbuild-perl: Replace sbuild <= 0.58.4 (due to also providing perl modules) - sbuild: Depend on the same version of libsbuild-perl. -- Roger Leigh Mon, 15 Jun 2009 20:30:34 +0100 sbuild (0.58.4-1) unstable; urgency=low [ Roger Leigh ] * New release. * sbuild: - A $purge_build_deps configuration option, and --purge-deps command-line option have been added to control build-dependency removal (Closes: #528312). - Use the isin function from the Sbuild module (Closes: #529470). Thanks to Gustavo Noronha Silva for spotting this. * Sbuild: - Use Filesys::Df (libfilesys-df-perl) in place of invoking /bin/df and parsing its output. This is more robust and efficient, and works whatever the user environment (Closes: #509133). -- Roger Leigh Tue, 19 May 2009 22:16:46 +0100 sbuild (0.58.3-1) unstable; urgency=low [ Roger Leigh ] * New release. * debian/control: - Update to Standards Version 3.8.1. - Add buildd package. - Add libsbuild-perl package. - All packages depend upon libsbuild-perl. * Add support for appending a tag to version numbers (Closes: #475777). Thanks to Timothy G Abbott for this patch. * When using the --help or --version options, don't abort if not in the sbuild group (Closes: #523670). Group membership is now only performed after options parsing, and only if required. * Allow config files to use $HOME (Closes: #524564). Thanks to James Vega for this patch. * Restore buildd package. * Split common library functions into new libsbuild-perl package. * debian/sbuild.(preinst|postinst|postrm): - Remove special cases for versions older than oldstable. Update addition and removal of sbuild group to use return value of getent rather than parsing getent output. - Use addgroup/delgroup in place of adduser/deluser. - Use --system when adding and deleting group, to ensure creation of a system group. Migrate existing non-system group and group members if the system group is not present. - Handle removal of 50sbuild setup script. * debian/buildd.(preinst|postinst|postrm): Add maintainer scripts for buildd package. Move configuration file from /etc/buildd.conf to /etc/buildd/buildd.conf if present. Also create buildd user and group for running the buildd daemon. * Sbuild::Conf: Don't default MAINTAINER_NAME to $DEBEMAIL if unset in the configuration file (Closes: #520158). * /etc/schroot/setup.d/50sbuild: Remove. The setup tasks performed by this script are now handled internally by sbuild. -- Roger Leigh Sun, 17 May 2009 15:52:53 +0100 sbuild (0.58.2-1) unstable; urgency=low [ Roger Leigh ] * New release. * etc/50sbuild: Don't create user home directory inside the build chroot. Home directories are not required for building. * lib/Sbuild/ChrootInfoSchroot.pm: Run schroot in a C locale, to avoid localisation of the output which breaks parsing (Closes: #520755). This was preventing the detection of chroots in some locales. * debian/buildd.cron.d: Move example crontab here, with entries commented out for now. * debian/rules: Use dh_installcrontab to install crontabs. * Remove buildd package for this release, because it's not yet ready for use. -- Roger Leigh Sat, 11 Apr 2009 10:20:25 +0100 sbuild (0.58.1-1) unstable; urgency=low [ Roger Leigh ] * debian/rules: Run configure setting DCMD, SUDO and SCHROOT. (Closes: #519097). It's not possible to install sudo as a build-dependency due to it not allowing automatic removal, and none of the commands are actually needed for the build, just setting the default path. * sbuild: Don't erase default chroot environment (Closes: #519276). This removed APT_CONFIG, preventing sbuild from working correctly. Thanks to Francois-Denis Gonthier. -- Roger Leigh Wed, 11 Mar 2009 23:16:41 +0000 sbuild (0.58.0-1) unstable; urgency=low [ Roger Leigh ] * New release. * debian/rules: - Clean up old unused code. - Correct patching of config.status and config.guess. - Add functional binary-arch target. - Use dh_prep in place of dh_clean -k. - Don't configure with --with-postgresql (debversion code moved to postgresql-debversion). * debian/compat: Update to debhelper version 7. * debian/control: - Build-Depend on debhelper 7. - wanna-build recommends postgresql-8.3-debversion. * debian/NEWS: Document incompatible changes from previous versions. * debian/sbuild.docs: New file. Add NEWS. * debian/wanna-build.docs: New file. Add NEWS. * buildd-mail-wrapper: Use more portable BSD getloadavg in place of Linux-specific sysinfo. Thanks to Robert Millan for this patch (Closes: #511095). * wanna-build: --help output now documents --create-db, since --help now displays the full manual page (Closes: #511314). [ Kees Cook ] * lib/Sbuild.pm: always perform version checks on provided packages (Closes: #505747). -- Roger Leigh Sun, 08 Mar 2009 21:53:54 +0000 sbuild (0.57.5-1) unstable; urgency=low * New release. * Sbuild::Build::new: Check if 'DSC' exists rather than 'DSC File' to allow the .dsc to be in any directory (Closes: #489794). Thanks to Francois-Denis Gonthier for this patch. * $Sbuild::Conf::apt_allow_unauthenticated: New configuration parameter to disable APT package authentication, which is now enabled by default (Closes: #492327). Thanks to Enrico Zini for this patch. * Sbuild::Options: Use isin from Sbuild.pm (Closes: #492577). * Sbuild::Log: Add version number and correctly-formatted date to the package log name instead of a raw time_t (Closes: #493150). Additionally add user and architecture to the name. * Sbuild::Options: --make-binNMU no longer tries to assign an lvalue (Closes: #493325). Thanks to Greg Hudson for this patch. * $maintainer_name, $uploader_name and $key_id are now optional in .sbuildrc; one is only required with performing binary NMUs for the entry in debian/changelog (Closes: #489557). * debian/sbuild.postrm: Correct use of local to remove bashisms. -- Roger Leigh Sat, 02 Aug 2008 21:23:13 +0100 sbuild (0.57.4-1) unstable; urgency=low * New release. * debian/control: Update to Standards Version 3.8.0. * Use schroot "Session Purged" flag rather than "Session Cloned" (Closes: #482804). Thanks to Timothy G Abbott. * Handle version provides correctly, by using "~*=PROVIDED=*=" in place of "=*=PROVIDED=*=" as the package version (Closes: #395271). Thanks to Niko Tyni for this patch. * Don't include epoch version in directory names (Closes: #482456). Thanks to Raphael Hertzog. * man/sbuild-setup.7.in: Replace references to buildd.chroot with sbuild-createchroot, and adduser with sbuild-adduser (Closes: #483654). Thanks to Marc Fargas. * Package name, version, build directory and associated information are now contained within Sbuild::Build objects. This allows stripping of epoch to construct correct unpack directory location (Closes: #482931, #482922). * Warnings due to uninitialised variables are no longer reproducible (Closes: #449251). -- Roger Leigh Sun, 06 Jul 2008 12:21:06 +0100 sbuild (0.57.3-1) unstable; urgency=low * New release. * --chroot and --arch now work together (Closes: #479714). -- Roger Leigh Sun, 11 May 2008 10:49:17 +0100 sbuild (0.57.2-1) unstable; urgency=low * debian/copyright: Update copyright holders and copyright information. * debian/rules: Run dh_link in binary-indep target to correct symlinks. * debian/wanna-build.install: Install manual pages. * man/sbuild.1.in: - Add missing character, thanks to LI Daobing (Closes: #474487). - Document --binNMU (Closes: #466927). - --distribution should be --dist (Closes: #477693). Thanks to Martin F Krafft. * debian/README.Debian: Remove reference to README-buildd.chroot (Closes: #474030), thanks to Marc Fargas. Update sbuild statistics information. * Add --apt-update option to sbuild to run "apt-get update" in the chroot prior to fetching sources and building (Closes: #472350). Thanks to Timothy G Abbott for this patch. * Add --chroot option to specify a chroot separately from the distribution name (Closes: #474160). Thanks to Simon McVittie for this patch. * debian/control: Depend on debhelper version 6 or greater (Closes: #477655). Thanks to Martin F Krafft. * lib/Sbuild/Conf.pm: Don't require $mailto to be set if not running in a buildd environment (Closes: #478045). Thanks to Martin F Krafft. * Use dcmd to parse dsc files, rather than hand-parsing. This allows support of the new dpkg source format. * All files used in a build are stored in /build/username-package_version-arch-XXXXXX inside the chroot (Closes: #478044). -- Roger Leigh Sun, 27 Apr 2008 21:22:19 +0100 sbuild (0.57.1-1) unstable; urgency=low * New upstream release. * debian/control: - Depend upon schroot >= 1.1.6. This version includes a SESSION_CLONE property, used to determine if a chroot is cloned, and hence package removal may be skipped. - Add wanna-build package. * debian/rules: set libexecdir to /usr/share, for compatibility with locations of scripts in earlier versions. * debian/sbuild.install: use /usr/share in place of /usr/lib (Closes: #458779). * debian/wanna-build.install: New file: files for wanna-build. * sbuild: Don't parse output of dpkg-source (Closes: #471747). -- Roger Leigh Thu, 27 Mar 2008 20:42:56 +0000 sbuild (0.57.0-1) unstable; urgency=low * Sbuild/*.pm: Reindent to increase readability. * Sbuild/Chroot.pm: set APT::Install-Recommends to false inside the chroot (Closes: #449253). * Sbuild/Conf.pm: Add and export $check_depends_algorithm. [Jan-Marek Glogowski] * sbuild: - Reindent to increase readability. - Add additional syntax checks. Thanks to Jan-Marek Glogowski. - build: Use unicode line drawing characters instead of ASCII. - filter_dependencies: Remove redundant conditional. [Jan-Marek Glogowski] - Add check for check-depends-algorithm option. [Jan-Marek Glogowski] - filter_dependencies: Change dependency behaviour depending upon check_depends_algorithm. [Jan-Marek Glogowski] - Move to bin/. * avg-pkg-build-time: - Move to bin/. * bin/*: Reindent to increase readability. * chroot/*: Reindent to increase readability. * bin/sbuild-createchroot: - Moved from chroot/buildd.chroot. - Also install fakeroot and build-essential. * sbuild-createchroot.1.in: Add manual page. * chroot/buildd.chroot: - Add GPL boilerplate. - Remove /etc/passwd creation (already done by debootstrap). - Remove sbuild directory creation (already done by schroot). - Use here doc to set up /etc/apt/sources.list. - List sources.list. * chroot/README: Rename from README.buildd-chroot. Remove buildd.chroot section. * example.sbuildrc: Add missing variable types. [Jan-Marek Glogowski] * example.sbuildrc: Add missing variable types and add $check_depends_algorithm. [Jan-Marek Glogowski] * sbuild.1: Document --check-depends-algorithm [Jan-Marek Glogowski] * Move manual pages to man/. * debian/manpages: Move manual pages to man/. * sbuild.conf: Move to etc/. * example.sbuildrc: Move to etc/. * debian/compat: Move to debhelper v6 compatibility level. * debian/control: Update to Standards-Version 3.7.3. * debian/copyright: - Update git repository location. - Update GPL boilerplate. * debian/sbuild.dirs: - Rename from debian/dirs. - Remove all but -var/lib/sbuild/srcdep-lock. * debian/manpages: Remove. * debian/sbuild.postinst: Rename from debian/postinst. * debian/sbuild.preinst: Rename from debian/preinst. * debian/sbuild.postrm: Rename from debian/postrm. * debian/sbuild.install: - New file. - Install files from usr/sbin and usr/share/man/man8. * debian/rules: - Install sbuild-createchroot, and add buildd.chroot compatibility symlink. - Move -stamp files to debian/. - Remove GENFILES. - Run configure, make, and make install in appropriate rules. - Use dh_install. - Remove all special-cased installation rules (now handled by automake). * Note: All upstream changes are now in an upstream ChangeLog. -- Roger Leigh Tue, 01 Jan 2008 11:36:55 +0000 sbuild (0.56) unstable; urgency=low * sbuild - Fix --force-orig-source option which was renamed to --force_orig_source while rewriting the options parsing logic to use Getopt::Long (Closes: #428205). Thanks to Alec Berryman for reporting this regression. - Accept arguments for options requiring a string (Closes: #431216). Thanks to Anders Kaseorg for the patch for this regression. * debian/preinst: Use dpkg-query in place of /var/lib/dpkg/status. -- Roger Leigh Sat, 07 Jul 2007 20:36:35 +0100 sbuild (0.55) unstable; urgency=low * sbuild: - Parse options with Getopt::Long. - Remove trailing whitespace. - Initialise $main::sub_task with a value, in case the build gets terminated prior to it being used. - Change the position of begin_session, so that it matches the cleanup order on shutdown. - build: + Document the regex which strips the epoch from the version number. + Remove the call to setsid when forking dpkg-buildpackage, because this broke shell job control. Some packages might possibly hang while building if they detect they have a controlling terminal, but IMO this is a bug in the package. + When handling the timeout for dpkg-buildpackage, make the $SIG{'ALRM'} handler local, so that it is restored to the default once the build has finished. + When calling mv to move files, use -f to make sure it doesn't run interactively. - check_dependencies: If a toolchain package is missing, print a "not installed" message, rather than a blank version. - dsc_md5sums: Log failure to open the .dsc. - fetch_source_files: Strip the epoch of the version number, so that $dscbase matches the .dsc filename in the filesystem (Closes: #425715). Thanks to Lucas Nussbaum. - merge_pkg_build_deps: Replace references to "central" src deps with build-essential deps. - parse_manual_srcdeps: New function, to replace the addition of manual source dependencies from the removed read_deps() function. - shutdown: Call end_session to clean up the chroot. * Sbuild/Chroot.pm: - end_session: + Add a debugging message. + Clear $schroot_session. * Sbuild/Conf.pm: Add linux-libc-dev, gnumach-dev, hurd-dev and kfreebsd-kernel-headers to @toolchain_regex. Thanks to Clint Adams (Closes: #425855). * Sbuild/Log.pm.in: - Remove trailing whitespace. - open_log, open_pkg_log: Ignore SIGINT, SIGQUIT, SIGTERM and SIGPIPE in the logger processes, so that logging continues if the process group is signalled to terminate. They will exit when the group leader exits or closes the pipe. * debian/changelog: Fix missing colon in bug closure for revision 0.2.4. * debian/compat: New file. Set to debhelper compatibility level 5. * debian/control: Depend on debhelper v5. * debian/NEWS: Renamed from debian/NEWS.Debian (Closes: #425370). Thanks to Lucas Nussbaum for spotting this. * debian/rules: Remove DH_COMPAT. -- Roger Leigh Mon, 28 May 2007 00:38:46 +0100 sbuild (0.54) unstable; urgency=low * debian/control: - Remove sudo from Depends. - Add schroot to Depends. - Remove schroot from Recommends. - Depend on dctrl-tools rather than the transitional grep-dctrl package. Thanks to Jonh Wendell (Closes: #417573). * debian/rules: - Don't install sbuild.conf.local. - Install sbuild.conf into /etc/sbuild. * debian/NEWS.Debian: - New file. - Document removal of manual source dependencies and sudo. - Document removal of support for building from a directory. - Document removal of building on the host system. - Document sudo->schroot migration. - Document change in $sbuild_mode default. * debian/README.Debian: - Document removal of manual src-deps. - Remove requirements for chroot symlinks in working directory. * sbuild: - Remove read_deps, so manual src-deps are no longer read. The remainder of the manual src-deps support remains to be removed. - Quote all arguments to system commands such as "rm -rf", to prevent potential disasters. - Update copyrights, and encode in UTF-8. - Use "du -k -s" instead of "du -s" to increase portability. Thanks to Martin Koeppe (Closes: #418061). - Compute package, version, directory and whether to download sources before calling fetch_source_files, because all the needed information is available at this point. - cleanup_packages: + Remove check for schroot when removing build dependencies, since schroot is the default. + Remove undo_specials(). - build: + Remove do_apply_patches. + Replace "822-date" with "date -R". Thanks to Guillem Jover for this patch (Closes: #415798). + Remove support for building from a directory. + Run dpkg-source from within the chroot. + Don't chdir before running dpkg-source. + Don't chdir before running dpkg-parsechangelog (do it in the schroot child process). + Remove obsolete code for running dpkg-buildpackage outside a chroot. - fetch_source_files: + Remove support for building from a directory. + Download sources directly into the chroot build directory. For sources already existing outside the chroot, copy them into the chroot build directory. + Add extra directory, package, version and download arguments. + Only call dsc_md5sums once, rather than twice. - apply_patches: Remove. - get_special: Remove use of @main::global_patches. - Remove SVN Id:. - install_deps: Remove @special use. - unpack_special_source: Remove. - undo_specials: Remove. - filter_dependencies: Remove @special use. - run_script: Remove. - parse_one_srcdep: Remove @special use. - get_special: Remove. - write_srcdep_lock_file: Remove @special use. - check_srcdep_conflicts: Remove @special use. - dump_main_state: New function to dump the program state using Data::Dumper. Use to dump the state after each build. - Add / separators to all users of $main::chroot_build_dir in paths. - Replace all users of regular expressions to strip the chroot dir from paths with strip_chroot_path. - get_dpkg_status: Print debugging messages with defined variables only, to avoid Perl warning. - verify_md5sums: Remove obsolete comment regarding chroots. - check_group_membership: New function to check the user is a member of the sbuild group (Closes: #414064). - Added new command-line argument --arch to specify the architecture, and pass this to begin_session (Closes: 410576). * Sbuild/Chroot.pm: - Remove all special casing for sudo and schroot. schroot is now the only supported method of accessing chroots. - end_session: Only attempt to end a session when $schroot_session is non-empty. - _setup_options: + Remove use of $chroot_only. + Remove trailing / from 'Build Location'. - init: Add newline to debugging message. - strip_chroot_path: New function to strip the chroot location from a path. - log_command: Correctly log commands when no APT Options stripping is needed. - get_command_internal: Set the working directory inside the chroot to the build location. - begin_session: take the architecture as a second argument, and check if a chroot specific for the architecture exists. * Sbuild/Conf.pm: - Don't export $source_dependencies. - Don't define $source_dependencies. - Abort with an error if $source_dependencies is defined. - Don't export $sudo or $chroot_mode. - Don't define $sudo or $chroot_mode. - Remove sudo sanity checks. - Abort with an error if $sudo or $chroot_mode are defined. - Don't export $chroot_only. - Don't define $chroot_only. - Abort with an error if $chroot_only is defined. - Define and export %alternatives. Thanks to Martin Koeppe (Closes: #418060). - Define and export @no_auto_upgrade and %watches. - Remove the requirement for /usr/share/sbuild/sbuild.conf. - Mark deprecated/obsolete variables for removal post-Lenny. - Set defaults from global sbuild.conf. * sbuild.conf: - Remove $source_dependencies. - Remove $sudo. - Remove $chroot_only. - Add and document all options from Sbuild/Conf.pm. - Reorder into sections. - Merge with sbuild.conf.local, and install into /etc/sbuild. * sbuild.conf.local: - Remove $source_dependencies. - Remove. * example.sbuildrc: - Replace all options with documented options from sbuild.conf. - Add additional user-centric options from sbuild.conf. - Reorder into sections. * sbuild.1.in: Document --arch and chroot search order. * sbuild-setup.7.in: - Remove sudo setup. - Update user section to document sbuild group membership and add_sbuild_user. Remove chroot setup, which is now handled by schroot (Closes: #413524). * bin/README.bins: Remove sudo from extra package list. * bin/updatechroot, bin/upgradechroot, bin/chrapt: Remove chroot_mode. * chroot/add_sbuild_user: - Remove sudo setup instructions and copying of /etc/sudoers to the chroot. - Rewrite in perl. Only call adduser; all other chroot setup is taken care of by the 50sbuild schroot chroot setup script (Closes: #413908). * TODO: New file. Document needed changes. -- Roger Leigh Fri, 18 May 2007 17:46:31 +0100 sbuild (0.53) unstable; urgency=low * Sbuild/Conf.pm: Add and export check_watches configuration variable. * sbuild: - Set umask to 022 so that dpkg-buildpackage always runs with a sane umask (Closes: #405836). - check_watches: Don't check watches if check_watches configuration variable isn't set (Closes: #397123). - get_apt_policy: Allow ~ in version numbers. Thanks to Frank Lichtenheld for this patch (Closes: #407293). - When running apt-cache, divert STDOUT to the package log, so that warnings do not get mailed separately (Closes: #399178). - fetch_source_files: + Correct indentation, and error with brace placement which caused apt-cache output to not be used. + Add package information into the key of the %entries hash, in order to cope with multiple packages being returned by apt-cache. Based on a patch by Goswin von Brederlow for Bug #408091. * sbuild.conf: Obsolete $source_dependencies. * sbuild.conf.local: - Add pgp_options from sbuild.conf (Closes: #398128). - Add check_watches. - Obsolete $source_dependencies. * update-sourcedeps, update-sourcedeps.1.in: Remove (Closes: 409642). Thanks to Kenshi Muto for reporting that it no longer works. * debian/rules, debian/manpages, debian/README.Debian: Remove support for update-sourcedeps, and note that sourcedeps support is obsoleted and will be removed in Lenny. -- Roger Leigh Sun, 11 Feb 2007 10:18:12 +0000 sbuild (0.52) unstable; urgency=low * New upstream release. * sbuild: Remove incorrect WannaBuild:: prefix from version_compare. -- Roger Leigh Sat, 21 Oct 2006 21:23:16 +0100 sbuild (0.51) unstable; urgency=high * Urgency is high because this version fixes an RC bug in testing. * Sbuild.pm: Fix handling of ~ in versions (merge from upstream SVN cset 100; Closes: 392752). * sbuild, Sbuild/Conf.pm, sbuild.conf.local: Add support for setting APT policy, to allow building from experimental and sarge-backports. Thanks to Wouter Verhelst for this patch, which has been slightly modified to add configurability and adapt to this version of sbuild. * sbuild: - Don't run md5sum inside the chroot. Thanks to Michael Banck (Closes: #392323). - chroot_arch(): New function to detect build architecture from within the chroot. Thanks to Kees Cook (Closes: #392992). * Sbuild/Conf.pm: Fix check for schroot. Thanks to Julien Danjou for finding this (Closes: #392751). * sbuild-setup.7.in: Correct example commandline for debootstrap. Thanks to Alex Pennace (Closes: #391277). -- Roger Leigh Sat, 21 Oct 2006 10:13:00 +0100 sbuild (0.50) unstable; urgency=low * debian/copyright: Add Alioth file download location. * chroot/add_sbuild_user: - Fix chrapt command examples in output to use correct option syntax, thanks to Matthias Julius (Closes: #381186). - Add SHELL to sudoers env_keep. * sbuild: - dsc_md5sums: Return hashref on failure, rather than -1. - verify_md5sums: Only run md5sum if there is one or more md5sum to verify, to prevent md5sum waiting forever on stdin if there are no files to check. Thanks to Daniel Stone. * Sbuild.pm: Use new binNMU versioning scheme (+bn), taken from wanna-build SVN. Thanks to Clint Adams (Closes: #384137). * Sbuild/Conf.pm: Check sudo does not strip SHELL from the environment. * sbuild-setup.7.in: Document needed addition of SHELL to sudoers env_keep (Closes: #389815). -- Roger Leigh Fri, 29 Sep 2006 14:08:11 +0100 sbuild (0.49) unstable; urgency=low * Sbuild/Conf.pm: init checks if APT_CONFIG and DEBIAN_FRONTEND are being stripped from the environment by sudo (when running in split mode), and aborts with instructions for correctly configuring sudo. This prevents apt-get silently using the configuration from the host system instead of the chroot. * Sbuild/Chroot.pm: When running in split mode, use the -s option of su to set the shell used inside the chroot to /bin/sh. This ensures that a valid shell is always used when the $SHELL is not available inside the chroot (Closes: 378283). * sbuild.conf, sbuild.conf.local, update-sourcedeps, sbuild.1.in, avg-pkg-build-time.1.in: Update to use the new configuration file locations. -- Roger Leigh Sat, 15 Jul 2006 23:42:09 +0100 sbuild (0.48) unstable; urgency=low * Sbuild/Chroot.pm: Use su, rather than sudo, inside the chroot. This prevents the APT_CONFIG and DEBCONF_FRONTEND environment variables from being removed (Closes: #376020). * Sbuild/Conf.pm: Add $Sbuild::Conf::su. * sbuild-setup.7.in: Remove sudo configuration inside the chroot, now this is no longer required. -- Roger Leigh Sun, 9 Jul 2006 18:18:33 +0100 sbuild (0.47) unstable; urgency=low * bin/checkchroot: Correct uninitialised value warnings due to using an undefined variable (Closes: #369709). * bin/chrapt, bin/updatechroot, bin/upgradechroot: When chroot_mode is "schroot", chdir to / to ensure the CWD exists inside the chroot. Thanks for Clint Adams for finding this (Closes: #372806). * sbuild: fetch_source_files: When running apt-cache, check if we got valid output, and warn appropriately if the output is invalid (Closes: #369707). Output may be invalid if there are no deb-src lines in /etc/apt/sources.list in the chroot. * Sbuild/Conf.pm: Remove $Sbuild::Conf::log_dir checks. * Sbuild/Log.pm.in: If $Sbuild::Conf::log_dir does not exist, try to create it, and if this fails, warn and log to stdout (Closes: #369718). -- Roger Leigh Sat, 17 Jun 2006 12:04:36 +0100 sbuild (0.46) unstable; urgency=low * sbuild: - fetch_source_files: Only print "apt-get update" invocation in debug mode. - get_dpkg_status: Make sure $version is defined before checking its value, to ensure the Debian version can have a value of 0. Thanks to Santiago Vila for this fix (Closes: #368066). * Update svn::ignore properties to ignore generated files. * debian/control: - Update to Standards-Version 3.7.2. - Use Build-Depends, rather than Build-Depends-Indep. -- Roger Leigh Sat, 27 May 2006 15:22:02 +0100 sbuild (0.45) unstable; urgency=low * bin/checkchroot: - Check if the dpkg and reference files contained any data, and exit with an error if either were empty (Closes: #363351). - On error, use Sbuild::Utility::shutdown to clean up. * bin/chr-hold, bin/chr-unhold: On error, use Sbuild::Utility::shutdown to clean up. * sbuild: - build: Only print dpkg-buildpackage invocation in debug mode. - uninstall_debs: Only print dpkg invocation in debug mode. * debian/control: Update to Standards-Version 3.7.0. -- Roger Leigh Mon, 1 May 2006 09:48:20 +0100 sbuild (0.44) unstable; urgency=low * avg-pkg-build-time: Use Sbuild::Conf. * bin/checkchroot: Convert to Perl, using Sbuild::Utility. * bin/chrapt: Convert to Perl, using Sbuild::Utility. * bin/chr-hold: Convert to Perl, using Sbuild::Utility. * bin/chr-unhold: Convert to Perl, using Sbuild::Utility. * bin/gochroot: Convert to Perl, using Sbuild::Utility. * bin/updatechroot: - Convert to Perl, using Sbuild::Utility. - chrapt is no longer used (Closes: #355035). - Sbuild::Chroot is used for chroot access: + Suite names are no longer hardcoded (Closes: #355037). + APT Options are set correctly (Closes: #355038). * bin/upgradechroot: Convert to Perl, using Sbuild::Utility. * bin/common_functions: Remove; this is no longer used. * sbuild: - Treat schroot chroots with a "-sbuild" suffix in the same way as chroots without a suffix (Closes: #360124). - Use the new modules Sbuild::Chroot, Sbuild::Conf and Sbuild::Log. The functions moved into the modules have been removed. - Import needed module functions into the local namespace, to avoid long namespace prefixes on functions. - Remove $main::chroot_apt_options. - Move $main::debug to Sbuild::Conf. - Import Sbuild::Conf into package "conf". This allows the package name used by upstream to be used for backward compatibility. - Use $conf::HOME instead of $main::HOME. - Move $main::username to Sbuild::Conf. - Set $main::chroot_dir, $main::chroot_build_dir, $main::srcdep_lock_dir and $main::ilock_file from the current chroot $Sbuild::Chroot::current. $main::srcdep_lock_dir replaces $conf::srcdep_lock_dir (which is still used to set when the chroot is set up). - Pass $main::distribution to open_log and open_pkg_log. - Remove $main::cwd, $main::nolog and $main::verbose, now provided by Sbuild::Conf. They are imported from Sbuild::Conf for backward compatibility. - Remove unused $main::HOSTNAME. - Add build statistics to close_pkg_log. - Die if no maintainer_name, uploader_name or key_id is specified. - Set and unset $main::binNMU_name in the main loop, rather than when opening and closing the package log. In consequence, open_pkg_log now needs the package name only, and close_pkg_log does not need the package name passing. - build: + Set $firstline to "" to quell a warning. + Use debian_files_list to check for missing or extra packages, and warn appropriately. + Delete erroneous _all.deb files (Closes: #357042). - Don't use File::Temp (only needed by modules). - Remove build directory check. - Use File::Basename::basename instead of Sbuild::basename. - Don't import internal Sbuild::Chroot functions. - Split verify_dsc_md5sums into two parts: dsc_md5sums and verify_md5sums. - debian_files_list: New function to parse debian/files. * Sbuild/Chroot.pm: - New perl module for chroot operations. It contains the functions begin_session, end_session, log_command, get_command_internal, get_command, run_command, exec_command, get_apt_command_internal, get_apt_command and run_apt_command. - Don't export init and log_command. - Don't hardcode a list of chroots; use a glob to search for chroot-* instead. This allows any distribution name to be specified with -d. - Add an "APT Options" attribute to the chroot hash, to replace $main::chroot_apt_options. - Use STDERR instead of PLOG (which may not be available). - Replace $main::debug with $Sbuild::Conf::debug. - Replace $main::username with $Sbuild::Conf::username. - begin_session takes the distribution as its first argument, rather than using $main::distribution. - Don't use $main::chroot_dir. Add the build paths as 'Build Location', 'Srcdep Lock Dir' and 'Install Lock' to the chroot metadata. - Use File::Temp. - Don't export "internal" functions. - _setup_options: Set "APT Options" for schroot chroots. - log_command: Don't substitute CHROOT_APT_OPTIONS when no APT options are in use. * Sbuild/Conf.pm: - New perl module for configuration variables. It reads the system and user configuration. - Add $debug. - Add $username. - Add $cwd, $nolog and $verbose. They exported and used by the other modules in place of the variables in the main package. - Add and export $avg_time_db, $avg_space_db, $maintainer_name, $uploader_name and $key_id. - Add build directory check (moved from sbuild). * Sbuild/Log.pm: - New perl module for logging. It contains the functions open_log, close_log, open_pkg_log, close_pkg_log, add_time_entry, add_space_entry, send_mail and log_symlink. - $main::main_logfile and $main::pkg_logfile are package variables. - Removed use of $main::distribution. The distribution name must be passed to open_log or open_pkg_log. - Don't use $main::HOSTNAME or $main::arch. Get the values directly. - open_pkg_log: Save the package name for future use; the binNMU name (if any) is passed, so this no longer needs computing. - close_pkg_log: + Obtain $main::pkg_status, $main::pkg_start_time, $main::pkg_end_time and $main::this_space from the function arguments. + Don't pass the package name, which was saved in open_pkg_log. - add_space_entry: Use $space rather than $t, and don't use $main::this_space. - Use File::Temp. - Use File::Basename::basename instead of Sbuild::basename. * Sbuild/Utility.pm: New perl module for utility programs. This is a perl replacement for bin/common_functions. * bin/checkchroot: - Quote all variables. - Sort ref-chroot file before diffing (Closes: 360058). * avg-pkg-build-time.1.in, sbuild.1.in, sbuild-setup.7.in, update-sourcedeps.1.in, Sbuild/Log.pm.in: Rename and embed version and date tags for substitution. * COPYING: New file (GPL licence text). * debian/control: Update uploaders. * debian/copyright: - Update with new subversion repository locations for upstream and Debian. - Add Roger Leigh as a copyright holder. - Add a reference to /usr/share/common-licenses/GPL. * debian/dirs: Add usr/share/perl5/Sbuild. * debian/rules: - Install Sbuild/Chroot.pm, Sbuild/Conf.pm, Sbuild/Log.pm and Sbuild/Utility.pm into /usr/share/perl5/Sbuild. - Generate all manual pages and Log.pm in the build rule, and remove them in the clean rule. -- Roger Leigh Fri, 7 Apr 2006 09:47:00 +0100 sbuild (0.43) unstable; urgency=low * sbuild: - verify_dsc_md5sums(): New function to verify the MD5SUM of files in a .dsc file. - Add $conf::md5sum for security. - fetch_source_files(): + Use verify_dsc_md5sums to check for incomplete downloads, and redownload sources if needed; also verify again after download (Closes: #270439). + Remove redundant braces and reindent. - build(), shutdown(): Quote kill command correctly (Closes: #356686). - When using schroot, look for a distribution named "$distribution-sbuild" in preference to "$distribution". - open_log(), open_pkg_log(): + Use fork() rather than tee to multiplex log output. + Don't buffer log output (Closes: #358717). - close_log(), close_pkg_log(): Close all dup'd log streams, and don't kill the child log processes, which avoids dataloss in the pipeline. - log_symlink(): New function to create a symbolic link to the current package log. This replaces the use of /bin/ln, which has races if concurrent builds use it. - open_log(), close_log(): + Save a references to the initial STDOUT and STDERR, and restore them when the log is closed. + Create the build log using File::Temp, in the form build-distribution-date.XXXXXX.log. This prevents races during logfile creation when running concurrent builds. If the file is empty, it is unlinked on close, irrespective of whether verbose mode is used or not. - open_pkg_log(): Use the saved STDOUT for verbose logging. This prevents the package log being also directed to the build log. - setup_options(): Remove unused call to tmpnam(). - check_dependencies(): Print kernel information along with the toolchain package versions, in the same style as reportbug. - build(): Check for _all.udeb files which are built when they shouldn't (merge from upstream SVN cset 98). - Strip "./" from $pkg, so the name used for source dependencies is correct (Closes: #359747). - Add --force-orig-source option to force the inclusion of the .orig.tar.gz (Closes: #318030). - Add $conf::force_orig_source to allow --force-orig-source to be specified in a .sbuildrc. * sbuild.1: + Document schroot chroot naming. + Document --force-orig-source option. + Correctly escape hyphens in option and file names. * sbuild-setup.7: Use debootstrap rather than cdebootstrap. * bin/common_functions: Allow any chroot name to be specified (Closes: #356785). * bin/README.bins: Document changed chroot syntax. * bin/checkchroot: Set LC_COLLATE=POSIX to prevent collation issues (mismatches with the reference file; Closes: #294883). * bin/common_functions, bin/README.bins: Remove ~/build/ from the chroot path, to match sbuild behaviour of searching in the current directory (Closes: #355034). * chroot/README-buildd.chroot: Fix typo. * chroot/buildd.chroot: Use debootstrap rather than cdebootstrap (Closes: #358668). * debian/control: Recommend debootstrap rather than cdebootstrap. * example.sbuildrc: Add example $force_orig_source, with documentation. -- Roger Leigh Wed, 29 Mar 2006 14:58:32 +0100 sbuild (0.42) unstable; urgency=low * sbuild: - get_apt_command_internal(): Always add $main::chroot_apt_options. - log_command(): Add an additional priority argument. If nonzero, the message is always logged, otherwise is only logged if debug is enabled. - get_command_internal(): When running schroot, preserve the user environment, needed for APT_CONFIG, DEBIAN_FRONTEND, etc.. - get_command(), run_command(), exec_command(), get_apt_command(), run_apt_command(): + chdir to $main::cwd to make sure the directory location also exists inside the chroot. + Add an additional priority argument to control the urgency of the log message, and pass this to log_command(). - get_virtuals(): Remove usage of $main::chroot_apt_options, which is added automatically by get_apt_command(). - get_command(), run_command() and exec_command() only log the full command when debugging is enabled, otherwise only the short form is logged (Closes: #355043). - setup_options(): + Ensure APT_CONFIG is set to the correct path depending upon the chroot_mode. $chroot_aptconf is the absolute path to the file from the host system, while $aptconf is the absolute path when apt is run. + Only set $main::chroot_apt_options when chroot_mode is "split". + Always regenerate apt.conf, because when chroot_mode is changed, it will break APT unless rewritten. + Don't set "Dir" in $chroot_aptconf when in chroot_mode is "schroot" (because apt is run inside the chroot). - Remove setpgrp() calls, so that all child processes run in the same process group as the parent. - Add a $conf::sbuild_mode, used to switch behaviour between user and buildd defaults. The default is "buildd". This allows package build errors to be reported (Closes: #170742). - Add a --quiet option, the opposite action to --verbose. - open_pkg_log(): + Use correct Sbuild:: namespace for binNMU_version (Closes: #355861). + Create current-distribution symlink in addition to current. - Set the in the environment SHELL=/bin/sh, in case the user invoking sbuild uses a shell not available inside the chroot. - Remove unused variables @dist_parts and $main::nomail. - Use correct use syntax for File::Temp and Cwd, and initialise a number of variables which would otherwise be undefined, in order to remove run-time warnings. - Add a number of checks for undefined variables to remove run-time warnings. - Add -w to the shebang line, so sbuild always runs with warnings enabled. - All exec commands other than writing logfiles now use exec_command, so they get logged. - Require /usr/share/sbuild/sbuild.conf and optionally require /etc/sbuild/sbuild.conf. - Use named signals, rather than numbers, for portability. - close_log(), close_pkg_log: If verbose is enabled, flush the log and wait a second before killing tee, to prevent data loss in the pipeline. - $main::verbose is set by default if running on a tty (Closes: #355802). - LOG and PLOG are set to autoflush using IO::Handle. - $conf::build_dir defaults to $main::cwd if undefined. It is used as the directory containing the build chroots, build logs, and current symlinks (Closes: #183022). - Always print toolchain packages. This is done by always calling merge_pkg_build_deps(), and running all the way through install_deps(), even when the package does not supply any build dependencies or conflicts (Closes: #355040). - install_deps(): + If there are no package dependencies, create an empty anonymous array reference to hold the (nonexistent) dependencies, required by filter_dependencies. + Make sure %entries is initialised. - fetch_source_files(): Check that the dsc specified is valid. * sbuild.conf: Don't require local config file. * sbuild.conf.local: Add $sbuild_mode, defaulting to "buildd". * example.sbuildrc: Add $build_dir example. * sbuild.1: Document --quiet. * sbuild-setup.5: - Split chroot setup and user setup into two sections. - Document sudoers env_keep setup (Closes: #355072, #355604). * Sbuild.pm: Remove unused module 'IO'. * chroot/add_sbuild_user: Add sudoers env_keep example. * debian/README.Debian: Document existence of sbuild-setup(7). * debian/control: - Depend on perl-modules (for File::Temp). - Recommend schroot 0.2.7 or later (for preserving the environment). * debian/dirs: Add etc/sbuild. * debian/rules: - Remove "make clean" in clean target; there is no Makefile, so this is redundant. - Install sbuild.conf as /usr/share/sbuild/sbuild.conf and sbuild.conf.local as /etc/sbuild/sbuild.conf. * debian/preinst: - New conffile. - Remove /etc/sbuild.conf.local if not locally modified. * debian/postinst: - Move /etc/sbuild.conf.local to /etc/sbuild/sbuild.conf if needed. - Reindent. * debian/postrm: - Unlink /etc/sbuild.conf if present. - Unlink files under /var/lib/sbuild. - Reindent. -- Roger Leigh Mon, 13 Mar 2006 00:14:00 +0000 sbuild (0.41) unstable; urgency=low * sbuild: - setup_options(): Set $main::chroot_apt_options in the same manner as upstream. - setup_options(): Correct usage of a scalar reference rather than the scalar $main::chroot_dir (Closes: #354520). -- Roger Leigh Mon, 27 Feb 2006 19:07:59 +0000 sbuild (0.40) unstable; urgency=low * sbuild: - Fix typos in debug statement ($main::distribution rather than $main::distribtion, and $main::schroot_session rather than $main::scroot_session). Thanks to Adeodato Simó for this fix (Closes: #354456). - get_schroot_info(): Parse schroot "--info" Path (chroot location) output. - get_schroot_info(): Parse schroot "--info" Type (chroot type) output, and if "plain", always set $main::dist_sessioncaps to 0 ("plain" chroots may say they are session-managed, but do not support full session management, so they always need cleaning). * debian/control: - Recommend schroot (>= 0.2.5), for its "Path" information in --info output, used for determining the chroot location. -- Roger Leigh Sun, 26 Feb 2006 22:19:04 +0000 sbuild (0.39) unstable; urgency=low * sbuild: - fetch_source_files(): Merge from upstream SVN (cset 94); Strip trailing whitespace from each line in $dscfile/debian/.sbuild-build-deps early on, making all subsequent regexes simpler. - Update copyright notice (add myself as a copyright holder). - Add %main::sessioncaps to store whether or not a chroot is session-capable. Check the schroot "Session Managed" attribute to determine session capability. - If a chroot is session-capable, skip running uninstall_deps() (thanks to Reinhard Tartler). - Add debugging messages for distribution selection and schroot session creation (thanks to Reinhard Tartler). * debian/control: - Recommend schroot (>= 0.2.3-2), for its "Session Managed" information in --info output, used for skipping chroot cleanup. -- Roger Leigh Tue, 21 Feb 2006 23:44:19 +0000 sbuild (0.38) experimental; urgency=low * Full sudo access is no longer mandatory when using the schroot chroot_mode (Closes: #287669, #331506). * schroot session management is now fully implemented and completely functional. * sbuild: - Move schroot metadata parsing to a separate function, get_schroot_info(). Parse both "Location" (for backwards-compatibility) and "Mount Location". - Move path and APT setup into a separate function, setup_options(). - Remove check_dpkg_version(). This has not been necessary since the release of potato (Debian 2.2), which had a dpkg version 1.6.14. - When $chroot_mode == "schroot", clear %main::dist_order and %main::dist_locations using an empty array, rather than undef. - New functions get_command(), run_command(), get_apt_command() and run_apt_command() to run a command inside or outside the build chroot under the specified user, or run apt inside or outside the chroot (depending on the chroot_mode), respectively. - New function exec_command(). This is the same as run_command(), but runs the command with exec rather than system(). - New functions log_command() to log a command being run, get_command_internal() and get_apt_command_internal() to get a command string without logging it; these are used by get_command(), run_command, exec_command(), get_apt_command() and run_apt_command(), which do log the command being run. Commands are logged in for all chroot modes. - get_apt_command() and run_apt_command() take an additional parameter, the command to run (apt-get or apt-cache). - get_apt_command() and run_apt_command() take an additional parameter, the user to run as, because not all commands need (or should) run as root. - Use new commands for running commands inside and outside chroots: + Signing options for dpkg-buildpackage are double-quoted rather than single-quoted (because the main command is single-quoted). + All commands run in a pipeline are obtained with get_command() or get_apt_command(). + All other commands are run with run_command(), exec_command() or run_apt_command(). + check_space() only requires root access in the chroot. - Add schroot session management. Sessions are created, run and removed automatically. The current session is stored in $main::schroot_session. setup_options is called once per build, in order to set up the session options. - Add missing newline to log message. * sbuild.1: - Update outdated information. - Correct macro usage and reindent. - Correct command-line summary (Closes: #311589). * sbuild-setup.7: New manpage. This describes how to set up a chroot (Closes: #311363). * avg-pkg-build-time.1: Clean up. * update-sourcedeps.1: Clean up. * sbuild.conf: $schroot_options defaults to "-q" to match the built-in default. * example.sbuildrc: Single quote example email addresses in $maintainer_name, $uploader_name, and $key_id (Closes: #341327). * chroot/buildd.chroot: - Use "set -e" to abort on all errors (Closes: #342357). - Correctly quote all shell variables. - Use cdebootstrap rather than debootstrap. * chroot/buildd.chroot.pre-sarge: Remove. * chroot/README-buildd.chroot.pre-sarge: Remove (Closes: #308065). * debian/control: - Recommend schroot. - Recommend cdebootstrap rather than debootstrap. * debian/README.Debian: Update information about src-deps and schroot. -- Roger Leigh Wed, 15 Feb 2006 18:13:23 +0000 sbuild (0.37) unstable; urgency=low * Sync with upstream SVN: - avg-pkg-build-time, avg-pkg-build-time.1, sbuild, sbuild.1, update-sourcedeps, update-sourcedeps.1: Update copyright notices with current FSF postal address. - sbuild: + Split changes files sent in the log every 989 characters, to better conform to mail RFCs. + Always show versions of installed build dependencies. + Always purge packages when building in a chroot. + Output purged packages line by line, rather than all at once. + Use strftime() and getpwuid() instead of the external commands date and whoami. + Use /var/lib/sbuild/apt.conf if it exists, and create it if it does not. This fixes the problem of the root filesystem /etc/apt/apt.conf and /etc/apt/apt.conf.d directories being used, while the copies in the chroot filesystem are ignored. + Allow arch: all packages to be built when $main::build_arch_all is true. + Hardware DEBIAN_FRONTEND to "noninteractive" when installing and purging packages. "apt-get update" is also run when the package cache is out of date (closes: 331546). + Fix support for '~' in version numbers. + Add Sbuild.pm (upstream WannaBuild.pm), and replace version_cmp() with Sbuild::version_compare(). + Add REDO support for binNMUs. + Add stats generation for download+install, build and remove times. + Disassociate from the controlling terminal and make stdin /dev/null for the dpkg-buildpackage process. + Don't create entries to the sbuild log when a package claims to build an _all.deb, but doesn't. Instead, warn to the build log. + Delete binary-all packages that we didn't ask to be built. + By default, set APT::Get::AllowUnauthenticated to "true". + Add $conf::chroot_only for compatibility with upstream (closes: #302628). + Add $conf::dpkg_source. + Add $conf::build_env_cmnd. + Merge whitespace and indentation changes. + Fix typos. + shutdown(): Don't close the package log if there is no current job. + read_build_essential(): Read build-essential from $main::chroot_dir instead of the root filesystem. + Add @main::toolchain_pkgs and @toolchain_regex. + check_space(): Redirect stderr of du to /dev/null. + run_apt(): Complete support for "install-deps-env". + Add --use-snapshot for building with gcc-snapshot. + build(): Remove dpkg-buildpackage debugging statements. + merge_pkg_build_deps(): Correctly separate dependencies in $deps, and don't immediately return if there are missing packages. + Remove support for --store-built-packages. + get_dpkg_status(): Check $version is set and compute $result in the same manner as upstream. + run_apt(): Remove '*' from $pkgs and $rpkgs. + install_deps(): purge packages with "dpkg --set-selections". schroot support added in addition to upstream changes. + fetch_source_files(): Support versioned fetches with apt-get. + Add support for auto_giveback_socket: add an extra argument to --auto-give-back and add an ssh '-S' option to analyze_fail_stage(). + Support new --make-binNMU options. + Add support for $conf::chroot_only, and default to only running in a chroot for security and safety. + cleanup_close: Set $main::current_job to "" and shutdown if $main::HOME/EXIT-DAEMON-PLEASE exists and we are running in batchmode. + Move "Package claims to have built" error message to the same place as upstream. - sbuild.conf: + Remove watches. + Update alternatives (closes: #280689). + Comment out example %individual_stalled_pkg_timeout. + Empty @ignore_watches_no_build_deps. - sbuild.conf.local: + Add $chroot_only. - avg-pkg-build-space.1: Update text. - example.sbuildrc: + Remove $hack_changes_for_frozen. + Update comments. * sbuild.conf.local: - Use FHS-compliant pathnames, as in sbuild.conf. * Add support for building from experimental. * sbuild: - Parse the .changes rather than debian/files, so that the .dsc/.diff.gz/.orig.tar.gz are also copied back to ~/build. - Print information and contents of arch-all packages (closes: #321640). * debian/control: The maintainer field contains the list address. -- Roger Leigh Tue, 31 Jan 2006 12:58:57 +0000 sbuild (0.36) unstable; urgency=low Roger Leigh: * debian/changelog: Convert to UTF-8. * sbuild: - Don't fail in the absence of central sourcedeps. These are no longer required now source packages are required to have build dependencies, so this should not be fatal. - Added support for schroot: + Added $conf::chroot_mode. This may be set to "split" (the historical default), or "schroot" (use schroot instead of sudo). + All operations using sudo now check the value of $chroot_mode, and use sudo or schroot accordingly. + When using schroot, %main::dist_order is filled using the schroot chroot priorities. + Added %main::dist_locations to store the location of the available chroots. - Print a readable error if a chroot does not exist. * debian/control: Update to Standards-Version 3.6.2. * debian/copyright: Use the new FSF address. * debian/conffiles: Remove. * debian/rules: - Use debhelper version 4 compatibility mode. - Move the find -maxdepth option to before non-option arguments, to fix find warnings. - Remove template comments. - avg-pkg-build-space symbolic link should be relative. -- Roger Leigh Sun, 11 Sep 2005 10:02:19 +0100 sbuild (0.35) unstable; urgency=low Michael Banck: * bin/abort-current-build: Remove the `-B' from the grep line as `sbuild -s' does not pass that option to dpkg-configure and abort- current-build fails in that case. * sbuild: Set the locale to `POSIX' to make debconf and debhelper calls in the chroot not spew out locale warnings all the time. (closes: #287672) * sbuild: Removed check for specific distributions. Instead, fail if build/chroot-$dist is not there. * sbuild: Only override Distribution in .changes if specified as option on the command-line. (closes: #300145) * sbuild: Specify full path for Dir::Etc::main and Dir::Etc::parts. * example.sbuildrc: Clarify that $maintainer_name is not mandatory and overrides Maintainer: field, whereas $uploader_name overrides the Changed-By: field in changes. * Applied patch by Santiago Vila: - Moves scripts from /usr/lib/sbuild to /usr/share/sbuild and modifies all callers accordingly. - Add -n option to tail to comply with POSIX. - Call /usr/sbin/sendmail instead of /usr/lib/sendmail. (closes: #292717) * sbuild: Tolerate '0' as version number, thanks Santiago Vila. (closes: #300205) -- Michael Banck Fri, 1 Apr 2005 21:23:30 +0200 sbuild (0.34) unstable; urgency=high Francesco Paolo Lovergine: * Removed searchscripts recommendation in debian/control. That was requested by ppack now removed in archive. (closes: #272318) * checkchroot now uses grep-dctrl, thanks Clint Adams. Introduced dependency from grep-dctrl due to checkchroot. (closes: #260881,#265994) * Updated ref-* files for unstable and testing as well as the related README file. * This is the first revision CVS-enabled. -- Francesco Paolo Lovergine Sat, 25 Sep 2004 17:42:57 +0200 sbuild (0.33) unstable; urgency=low * Man page sbuild.1 revised. -- Francesco Paolo Lovergine Thu, 16 Sep 2004 16:42:18 +0200 sbuild (0.32) unstable; urgency=low * Added ~ as a legal character for debian version (post-sarge). * A few minor changes in README.chroot-buildd and man page. * Added -k and -e options as overriding for -m default in package signing. Man page changed to reflect new features. (closes: #260870) * Removed the CVS log variable in sbuild in order to import a new sane tree onto Alioth repo. Old logs are now stored in a new cvslogs.old file. * Minor revisions to ducumentation files. * Added Michael Banck as Uploader. -- Francesco Paolo Lovergine Thu, 16 Sep 2004 16:14:27 +0200 sbuild (0.31) unstable; urgency=low * Patch for #239339 revised: Escaping to manage correctly possible nested RE. (closes: #268712) Doing removes only in chroot environment. (closes: #264834). * Changed a bit man page to clarify better synopsis. (closes: #265998) -- Francesco Paolo Lovergine Sat, 28 Aug 2004 21:27:12 +0200 sbuild (0.30) unstable; urgency=high The "later better than never" release. Thanks Michael Banck, Martin Michlmayr and other submitters for useful patches. * example.sbuildrc now return 1 to satisfy perl require syntax. (closes: #228410) * Now copies the orig.tar.gz into $(CHROOT)/build// for non-native packages. (closes: #239339) * Corrected abort-current-build to manage correctly ps output. (closes: #249995) * Now should manage packages which provides the same pkgs of other yet installed ones. (closes: #259315) * build.chroot rewritten to use dbootstrap straight on. (closes: #235726,#228412,#228412) * Using dh_installman instead of obsolete dh_installmanpages. Added debian/manpages for that. * Alternatives modified for current ones in testing/sid. (closes: #228792) -- Francesco Paolo Lovergine Tue, 3 Aug 2004 18:21:22 +0200 sbuild (0.29) unstable; urgency=low * Now depends on exim4 (closes: #228591) * Non "noninteractive" is in lowercase currently. (closes: #228800) * Added /usr/bin/avg-pkg-build-space as symlink to /usr/bin/avg-pkg-build-time (closes: #228445) * add_sbuild_user corrected to show the true path of example.sbuildrc (closes: #228411) * removing obsolete packages in sid, and updated required ones (closes: #220932) * README.buildd-chroot updated (closes: #220933) -- Francesco Paolo Lovergine Fri, 23 Jan 2004 20:09:56 +0100 sbuild (0.28) unstable; urgency=low * Using latest instead of lastest. (closes: #202740) * Changing dependencies in buildd.chroot for current gcc. (closes: #180447) * Configuration examples now moved into /usr/share/doc/sbuild/examples Man changed as consequence. (closes: #208965) * Policy bumped to 3.6.1. -- Francesco Paolo Lovergine Tue, 11 Nov 2003 16:21:33 +0100 sbuild (0.27) unstable; urgency=low * sg is not available in hurd, removed in postinst and postrm (patch by Michael Banck). (closes: #206270) -- Francesco Paolo Lovergine Wed, 20 Aug 2003 09:03:41 +0200 sbuild (0.26) unstable; urgency=low * Ugh! Wrong control file. Now really updated as needed. (closes: #191203) -- Francesco Paolo Lovergine Fri, 20 Jun 2003 15:54:11 +0200 sbuild (0.25) unstable; urgency=low * New maintainer. Uploaders: Roger Leigh (closes: #191203) -- Francesco Paolo Lovergine Fri, 20 Jun 2003 15:17:25 +0200 sbuild (0.24) unstable; urgency=low * remove -qq from apt-get call in the updatechroot script * fix upgradechroot output and add -u to -y * added oldstable to distribution options * fix for dependency calculation for --arch-all builds from Martin Kögler (Closes: #180859) * libpng-dev => libpng12-0-dev in sbuild.conf * add dpkg-dev to package dependencies - thanks Michael Banck (Closes: #182234) * chroot building fix and waldi's patch still to come -- Rick Younie Sat, 19 Apr 2003 14:41:03 -0700 sbuild (0.23) unstable; urgency=low * fixed chroot building - thanks Matt Kraai for the patch and the heads-up - Closes: #167822 * use separate stable and testing/unstable required lists * updated the ref-* package lists * added -o/oldstable option to the helper scripts and fixed their usage strings -- Rick Younie Wed, 6 Nov 2002 06:07:22 -0800 sbuild (0.22) unstable; urgency=low * dpkg --root isn't fixed so use ppack for the checkchroot script, recommend searchscripts instead of suggest * add a note to README.Debian and the man page that sbuild must be run in ~/build (or wherever the chroot-* symlink is) for sbuild to find the chroot (thanks Otavio) -- Rick Younie Sat, 14 Sep 2002 19:38:16 -0700 sbuild (0.21) unstable; urgency=low * the new dpkg has gone into testing so add dselect to the buildd.chroot required list there as well -- Rick Younie Mon, 19 Aug 2002 22:35:24 -0700 sbuild (0.20) unstable; urgency=low * added a note that the original tarball has to be in the sbuild work directory $CHROOT/build/ for an "sbuild --source" build * removed the old potato chroot description; it can be gotten from the woody version of the package if needed * have sbuild make a ~/build/current symlink to the current build log -- Rick Younie Sat, 17 Aug 2002 09:26:55 -0700 sbuild (0.19) unstable; urgency=low * ref-stable = woody * re-added deborphan, searchscripts Suggests * add a note about setting up .sbuildrc * have sbuild, chrapt ignore base apt.conf{,.d} * handle dpkg/dselect unstable split in buildd.chroot; copy over /etc/hosts to chroot -- Rick Younie Sat, 20 Jul 2002 06:26:05 -0700 sbuild (0.18) unstable; urgency=low * split ref-testing from ref-unstable instead of symlink as they differ now * unstable dpkg --root is broken currently so use ppack instead of dpkg for checkchroot * don't 'touch' downloaded source; in buildd context, buildd-watcher should use ctime not mtime to look for old files * add a blurb about using chrapt to finish off the chroot build, in case debootstrap doesn't quite get it right -- Rick Younie Sat, 20 Jul 2002 06:26:05 -0700 sbuild (0.17) unstable; urgency=low * removed debconf-utils from unstable reference list * include Ryan's sbuild changes to allow the buildds to autobuild for security * include Ryan's debootstrap script for chroot building * the SBUILD_CHROOT_ROOT environment variable is gone. The chroots are now found by the ~/build/chroot-$DIST symlinks or absolute path. * moved the helper scripts to /usr/lib/sbuild * wrong switch so the 0.5 changelog was skipped; again, Closes: #138915 * create blank source-dependencies files on install -- Rick Younie Thu, 11 Jul 2002 01:22:56 -0700 sbuild (0.6) unstable; urgency=low * added dobuildlog, a shell script for processing build logs: file a bug, sign the changelog, reply to buildd if you're an admin * recommend fakeroot instead of depend as some arches don't have it. (Closes: #145753) -- Rick Younie Fri, 3 May 2002 22:22:41 -0700 sbuild (0.5) unstable; urgency=low * fix copyright file lintian errors * added ~/.wgetrc warning to man update-sourcedeps man page, Closes: #138915 -- Rick Younie Wed, 10 Apr 2002 00:27:25 -0700 sbuild (0.4) unstable; urgency=low * made /etc/sbuild.conf a conffile - thanks Gergely Nagy. (Closes: #136374) -- Rick Younie Sun, 3 Mar 2002 21:51:51 -0800 sbuild (0.3) unstable; urgency=low * added mailfrom config item so the msg body From: can be overridden * noninteractive -> Noninteractive for Ryan Murray * (re-)added conffile sbuild.conf.local for local changes that aren't suitable for ~/.sbuildrc * removed the bashrc & profile example files; they were part of my original local sbuild deb and are just clutter -- Rick Younie Sat, 23 Feb 2002 11:44:12 -0800 sbuild (0.2.5) unstable; urgency=low * add From/To headers to sbuild mail - thanks Gergely Nagy (Closes: #129850) * added deborphan to Suggests; -f is useful for finding the minimal chroot for an arch -- Rick Younie Fri, 18 Jan 2002 18:46:33 -0800 sbuild (0.2.4) unstable; urgency=low * Closes: #120309 (the ITP) * the sbuildrc:$source_dependencies config item got lost * removed Phil Blundell's apt "Replaces:" patch. This is a workaround for an apt weakness that shouldn't be depended on. * added fakeroot dependency. Thanks Michael Schmitz. -- Rick Younie Thu, 8 Dec 2001 05:55:08 -0800 sbuild (0.2.3) unstable; urgency=low * show all changes in initial *.changes -- Rick Younie Thu, 6 Dec 2001 05:55:08 -0800 sbuild (0.2.2) unstable; urgency=low * don't copy /etc/fstab to chroot -- Rick Younie Sun, 2 Dec 2001 00:34:38 -0800 sbuild (0.2.1) unstable; urgency=low * dpkg-buildpackage craps out on the unknown -d switch in the stable chroot. -- Rick Younie Fri, 30 Nov 2001 06:53:24 -0800 sbuild (0.2) unstable; urgency=low * Initial package -- Rick Younie Thu, 8 Nov 2001 00:18:34 -0800