setserial (2.17-53) unstable; urgency=medium * update watch file * debian/control: Standards version moved to 4.5.0 (no changes) * debian/control: use dh12 -- Thorsten Alteholz Wed, 02 Dec 2020 00:39:00 +0100 setserial (2.17-52) unstable; urgency=medium * debian/control: ass salsa VCS URLs -- Thorsten Alteholz Thu, 28 Feb 2019 19:39:00 +0100 setserial (2.17-51) sid; urgency=medium * debian/control: Standards version moved to 4.3.0 (no changes) * debian/control: use dh11 * debian/control: remove dependency for autotools-dev and dh-systemd * debian/control: replace prio extra by optional * debian/rules: do not use dh_systemd_enable * debian/rules: remove get-orig-source target * Fix FTCBFS: Export a triplet-prefixed CC (Closes: #876159) (Thanks to Helmut Grohne for the patch) -- Thorsten Alteholz Sun, 13 Jan 2019 15:39:00 +0100 setserial (2.17-50) unstable; urgency=medium * ack NMU, thanks to Martin Pitt and Christian Hofstaedtler for taking care of this * debian/control: add dependency to lsb-base (Closes: #850762) * debian/postrm: take care of old files (Closes: #830887) -- Thorsten Alteholz Sun, 22 Jan 2017 15:39:00 +0100 setserial (2.17-49.1) unstable; urgency=medium * Non-maintainer upload. [ Martin Pitt ] * 10_rc_etc_setserial.patch: Change etc-setserial's "checkfs" dependency to $local_fs, and drop initscripts dependency. (Closes: #804964) [ Christian Hofstaedtler ] * Drop empty /etc/modutils directory. * Install etc-setserial.service wrapping the etc-setserial init script. (Closes: #826132) -- Christian Hofstaedtler Sat, 02 Jul 2016 11:11:55 +0200 setserial (2.17-49) unstable; urgency=medium * as upstream archive vanished, watch file is useless * debian/control: Homepage: is gone as well * debian/control: Standards version moved to 3.9.6 (no changes) * debian/control: add initscripts to dependencies (Closes: #734496) * on request of lintian add sourcing of /lib/lsb/init-functions to both init scripts * Add debian/setserial.service systemd unit, mostly to relax the very demanding Before=sysinit.target plus After=remote-fs.target combination resulting from the init.d script's $remote_fs dependency. This can easily cause dependency loops when using NFS and NetworkManager. (Closes: #786976, LP: #1452644) (Closes: #761951) Thanks to Martin Pitt for providing the patch! * Add dh-systemd build dependency and call dh_systemd_enable in debian/rules. Thanks to Martin Pitt for providing the patch! -- Thorsten Alteholz Tue, 22 Sep 2015 23:00:00 +0200 setserial (2.17-48) unstable; urgency=low * new maintainer (Closes: #636122) * debian/watch: added * debian/rules: add hardening flags * debian/rules: modutils disappeared from Debian (Closes: #518313) * debian/rules: target get-orig-source added * debian/config: set -e moved from header to body of script * debian/postinst: set -e moved from header to body of script * debian/postinst: use default runlevel arguments for start and stop * debian/post*: do not use update-modules anymore (Closes: #468420) * debian/patches: add hardening flags * debian/patches: change /etc/init.d/setserial to properly report handling by kernel (Closes: #375276) * debian/patches: add status parameter for rc-files * debian/control: add some kind of homepage -- Thorsten Alteholz Mon, 02 Jul 2012 18:00:00 +0200 setserial (2.17-47) unstable; urgency=low * QA upload. * Remove deprecated dpatch and upgrade to packaging format "3.0 quilt" (Closes: #664320). * Update to Standards-Version to 3.9.3.1 and debhelper to 9. -- Jari Aalto Wed, 28 Mar 2012 22:16:35 +0300 setserial (2.17-46) unstable; urgency=low * Added README.source * Changed obsolete dpkg option (Closes: #566105) * Added Italian translation (Closes: #556032, #627138) * new standards version * orphaned package -- Jonas Genannt Sat, 11 Jun 2011 11:56:18 +0200 setserial (2.17-45.3) unstable; urgency=low * Non-maintainer upload. * Fix encoding for Danish debconf translation. -- Christian Perrier Wed, 12 Jan 2011 07:28:50 +0100 setserial (2.17-45.2) unstable; urgency=low * Non-maintainer upload. * Correct encoding for Swedish translations. Closes: #562792 -- Christian Perrier Tue, 29 Dec 2009 09:53:29 +0100 setserial (2.17-45.1) unstable; urgency=low * Non-maintainer upload. * Do not ignore errors in postrm script * Fix pending l10n issues. Debconf translations: - Spanish (Francisco Javier Cuadrado). Closes: #507755 - Danish (Joe Hansen). Closes: #554616 -- Christian Perrier Wed, 11 Nov 2009 08:02:01 +0100 setserial (2.17-45) unstable; urgency=low * Moved to dpatch. - It's now easy to maintain * new standards version * bumped debhelper to 5 * debian/rules: removed -s from install (Closes: #438016) * Updated sv.po (Closes: #491781) -- Jonas Genannt Sat, 27 Sep 2008 02:37:01 +0200 setserial (2.17-44.2) unstable; urgency=low * Non-maintainer upload to fix pending l10n issues. * Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #463672 * Remove obsolete setserial/rc-boot-file-renamed and setserial/rc-boot-file-removed debconf templates * [Debconf translation updates] - Japanese. Closes: #464443 - Galician. Closes: #464456 - Vietnamese. Closes: #464508 - Turkish. Closes: #464510 - Finnish. Closes: #464589 - Portuguese. Closes: #465337 - Basque. Closes: #465726 - Dutch. Closes: #466461 - Russian. Closes: #466576 - Czech. Closes: #466590 - Brazilian Portuguese. Closes: #466742 - German. Closes: #467352 - French. Closes: #467403 -- Christian Perrier Mon, 28 Apr 2008 09:15:48 +0200 setserial (2.17-44.1) unstable; urgency=low * Non-maintainer upload to fix release goal issue. * Correct LSB headers in init.d scripts (Closes: #460142). * Make sure to remove generated setserial.8 in clean target. -- Petter Reinholdtsen Mon, 21 Jan 2008 10:34:54 +0100 setserial (2.17-44) unstable; urgency=low * bumped up to Standards-Version 3.7.2 * Renamed po files: (Closes: #404174) - setserial.ja.po to ja.pl - seterial.pl.po to pl.po * Spanish translation by Javier Fernandez-Sanguino Pena (Closes: #401960) * Galician translation by Jacobo Tarrio (Closes: #409625) * Portuguese translation by Pedro Ribeiro (Closes: #410736) * Removed hardcoded configfile in initscript (Closes: #313447) * Added Run-time depdendencies to initscript * Replaced hardcoded /etc/init.d/setserial stop with invoke-rc.d in postinst -- Jonas Genannt Sun, 18 Feb 2006 14:46:45 +0200 setserial (2.17-43) unstable; urgency=low * New maintainer (Closes: #285355) * changed standards version to 3.6.2 * debian/control changed to ${misc:Depends} for po-debconf * removed: templates.fr, templates.de, templates.ru, templates.pt_BR, templates.eng * removed: patches/setserial-po.patch * removed: debian/conffiles no longer needed * removed: debian/conffiles.i386, debian/conffiles.m68k no longer needed * debian/rules: removed if && cp for conffiles * debian/postinst: fixed typo (Closes: #326556) * added debian/compat * fixed typo in de translation (Closes: #313830) * Vietnamese translation by Clytie Siddall (Closes: #318056) * Swedish translation by Daniel Nylander (Closes: #333752) * Updated russian translation (Closes: #324253) -- Jonas Genannt Mon, 14 Nov 2005 14:29:45 +0200 setserial (2.17-42) unstable; urgency=low * Added an alternative dependency on debconf-2.0. -- Ola Lundqvist Mon, 26 Sep 2005 22:10:24 +0200 setserial (2.17-41) unstable; urgency=low * Updated documentation for reconfiguration, closes: #310745. * Updated description to not have a capital letter in the beginning. * Applied a patch that fix a number of spelling issues in the manpage, closes: #302673. -- Ola Lundqvist Wed, 25 May 2005 19:28:02 +0200 setserial (2.17-40) unstable; urgency=low * Applied patch from robbe@orcus.priv.at that fix a gramatical error in German debconf translation, closes: #287646. * Fixed typo error in setserial --help (buad to baud), closes: #278053. * Added Czech debconf translation from Jan Outrata . * Fixed pl debconf translation to have correct number of choices to one of the debconf questions. * Changed section from base to comm. * Lowered priority of the package to extra. -- Ola Lundqvist Fri, 28 Jan 2005 22:09:13 +0100 setserial (2.17-39) unstable; urgency=low * Fix postinst syntax error. * Removed foo.txt file that should not be there. * Removed stray ^M^M characters in debian/po/nl.po. -- Ola Lundqvist Mon, 23 Aug 2004 15:50:34 +0200 setserial (2.17-38) unstable; urgency=low * Minor manpage correction (my error). -- Ola Lundqvist Thu, 12 Aug 2004 08:20:17 +0200 setserial (2.17-37) unstable; urgency=low * Updated pt_BR debconf translation, closes: #264260. Thanks to Andre Luis Lopes for the patch. * Added the removal of two more files in postrm, closes: #264954. * Updated standards version to 3.6.1. * Setserial is no longer a part of base, closes: #243841, #212646. * Applied patch for bluetooth driver, closes: #247881. * Added Netherland debconf translation, closes: #244318. Thanks to Luk Claes . * Added Japanese debconf translation, closes: #242271. Thanks to Hideki Yamane . * Updated manpage, closes: #261402. Thanks to A Costa for the suggested text. * Fixed XSI:ism in installation script, closes: #254911. Thanks to David Weinehall for the patch. * Removed modconf=/var/run/setserial.conf from rc.etc-setserial because it is not used, closes: #208576. -- Ola Lundqvist Wed, 11 Aug 2004 16:14:29 +0200 setserial (2.17-36) unstable; urgency=low * Added japanese debconf translation, closes: #242271. Thanks to Hideki Yamane . * Added polish debconf translation, closes: #242744. Thanks to Emil Nowak . -- Ola Lundqvist Wed, 14 Apr 2004 16:34:12 +0200 setserial (2.17-35) unstable; urgency=low * Added turkish translation, closes: #240653. Thanks to Mehmet Turker . * Added danish translation, closes: #238361. Thanks to Claus Hindsgaul . * Fixed confusing comments, closes: #227973. * Removed silly comments, closes: #225571. * Will remove /var/lib/setserial/etc.serial.conf.bkp on purge, closes: #229671. -- Ola Lundqvist Thu, 1 Apr 2004 08:04:38 +0200 setserial (2.17-34) unstable; urgency=low * Added po patch, closes: #202546. Thanks to Christian Perrier . * Fixed missing newline in error, closes: #234440. Thanks to Christian Haggstrom for the fix. -- Ola Lundqvist Fri, 12 Mar 2004 11:48:14 +0100 setserial (2.17-33) unstable; urgency=low * Changed from tail to sed to get first line using patch from Paul Eggert , closes: #188638. * Updated standards version to 3.5.8. * Removed full stop from description line. -- Ola Lundqvist Thu, 17 Apr 2003 23:48:07 +0200 setserial (2.17-32) unstable; urgency=low * Postinst fix in setserial, closes: #185665. -- Ola Lundqvist Mon, 24 Mar 2003 07:57:17 +0100 setserial (2.17-31) unstable; urgency=low * New maintainer, closes: #162856. -- Ola Lundqvist Tue, 1 Oct 2002 10:08:18 +0200 setserial (2.17-30) unstable; urgency=low * The debconf question concerning update-modules is removed. update-modules is executed automatically again. If update-modules damages your user configuration please file a bug with modutils. (closes: #151544) -- Gordon Russell Mon, 1 Jul 2002 18:04:55 +0100 setserial (2.17-29) unstable; urgency=high * Basically after a long discussion on debian-devel, the operation of setserial is changed so that o what was /etc/serial.conf is relocated to /var/lib/setserial/autoserial.conf o The priority of setserial using automatic configuration information in init.d is altered to run after /var is mounted (S46). o If /etc/serial.conf exists, its configuration overrides the autoserial.conf permanently and utterly. It is handled at the old priority level of S30. Thus if priority is essential to you you must create a /etc/serial.conf file yourself. This will allow: o /etc to be mounted read-only o Policy concerning configuration files to be upheld. When you install this version of setserial it will detect hand-crafted serial information and preserve it in serial.conf, otherwise it will be translated into the new structures. At worst, your hand-crafted serial.conf file will be preserved indefinitely in /var/lib/setserial/etc.serial.conf.bkp Do not delete this backup for any reason. Hope this works out for everyone. If a user had an issue with this setup do not file a bug without (1) reviewing the discussion on debian-devel, and (2) posing a workable solution in debian-devel which has a concensus of agreement. At worst, at least enter a discussion with me first before a bug report is filed. o For the moment I am leaving in the debconf option so that the use of update-modules can be disabled. I will remove this option when modutils handles modules.conf in a way which matches Policy. However Policy makes it clear that the sensible handling of modules.conf is down to modutils and not setserial. Thus worried people should file bugs with modutils concerning this specific issue. o In short, chaotic people can create /etc/serial.conf and that becomes definitive, or package-friendly people can indicate their desire to manage serial.conf themselves and then create /etc/serial.conf, with both approaches to manual serial management being equivalent. Asking for automatic management and then directly editing /var/lib/setserial/autoserial.conf is still suicide. -- Gordon Russell Tue, 25 Jun 2002 17:07:47 +0100 setserial (2.17-28) unstable; urgency=high * Well 2.17-27 caused me more problems than solutions, so I am going to backtrack from the solutions to 150514 (to use ucf) and instead force people to say if they want to use update-modules. If they do not, then they have to manage it themselves. Eventually I expect update-modules to offer users the ability to disable its function and to also preserve user modifications to that file. If users would like this functionality now, and they can get the update-modules maintainer to fix the problem then let me know and I will take the question out of setserial. (closes: #150514) (closes: #150663> (closes: #150684> -- Gordon Russell Sat, 22 Jun 2002 20:35:36 +0100 setserial (2.17-27) unstable; urgency=low * Calling update-modules breaks policy. Hopefully fixed using ucf. (closes: #150514) * Make the m68k build use the old code if it has the right include file, otherwise use the new hacked code. -- Gordon Russell Fri, 21 Jun 2002 15:18:01 +0100 setserial (2.17-26) unstable; urgency=high * Templates can be processed automatically by debhelper, so the rules file has been changed to do that. In addition there was a small error in the BR template which was corrected. (closes: #149624) * Build problem on the sparc build - copying stuff into a non-existant directory. Careless of me... It also highlighted an error I made since -25, copying the serial.conf example to /usr/share/doc rather than /usr/share/doc/setserial. All fixed. (closes: #149643) * Upstream code depends on m68kserial.h, but this seems to be missing in the m68 build! Currently no updated version of setserial exists. I have made some experiments using m68k.debian.org, and at the same time wandered through the current kernel code for the 68k series of machines. It looks to me as if someone has rewritten the 68k serial module to make it more compatible with the non 68k approaches. In setserial m68k is taken care of seperately from all other systems. I cannot find out exactly what has changed, and without root access on a 68k machine I cannot verify its functionality change. As an interim measure, I have adjusted the way setserial compiles so that it will compile on the latest kernels. I am reasonably sure that the end result will be a poorer environment for m68k users. Unfortunately I can do no better than this. If a concerned m68k user or two wants to co-operate with me then we can see what can be done. As the bug report concerned the build process, the bug is therefore closed with this modified source. At worst I would think the modified setserial will simply list more UARTS as unknown... (closes: #149642) -- Gordon Russell Fri, 14 Jun 2002 13:37:31 +0100 setserial (2.17-25) unstable; urgency=low * Upgrading policy to 3.5.6.0. This has resulted in serial.conf being removed from the conffile list. The protection of this file is now in the hands of the maintainer scripts. (closes: #144254) * Fixed a small error in the postinst file (related to AUTOSAVE_ONCE). * You now MUST use debconf, as maintaining a debconf version and a non debconf version is impossible with the new non-conf file approach. -- Gordon Russell Mon, 29 Apr 2002 13:57:35 +0100 setserial (2.17-24) unstable; urgency=low * Original source mentioned "GNU PUBLIC LICENCE". This has been clarified so that the whole package is consistently the GNU GENERAL PUBLIC LICENCE. (closes: #102239) (again) * Added a russian translation from ilgiz kalmetev Russian correspondance to him please! Note that I did not every receive this email, and thus copied the file from the bug report web page, and thus there is the possibility that the control codes did not come over properly. Please let me know!! (closes: #114301) * Tried to remove the need for db_input in postinst by silently ignoring problems with update_modules. Probably not a problem... * German translation added from Eduard Bloch (closes: #109942) * German translation lacking a translation of Choices is autosave selection, so I have put in the english equivalent instead. -- Gordon Russell Wed, 7 Nov 2001 09:41:30 +0000 setserial (2.17-23) unstable; urgency=low * update to the README file for people wanting to use nonstandard port names. * added French translations for configuration control. These were supplied by Laurent Pelecq , so please liase with him if you question the translation - my French is rather weak! (closes: #107675) * added some useful aliases for people using devfs. I hope this does not break anything. Please alert me if this is a problem. I am especially concerned that I am forcing ports to belong to the serial module, when there might be a chance that then belong to pcmcia serial devices. Only time will tell if this is really a problem. If it is you should edit the aliases to remove the collision and get back to me with your proposals. (closes: #107000) * Complaint that the upsteam author was not specific enough concerning which GNU licence the product was released under. His code (and my changes) are released under "The GNU General Public Licence" and this is made clearer in the copyright message. Probably there was only one GNU licence back in 1994 when this was originally written... (closes: #102239) * added in code to make use of the lastest config.sub and config.guess routines available, which required an additional build-depends to be added. These files have not been updated for a while and have not actually caused any problems, so this is really just a defensive move. -- Gordon Russell Wed, 8 Aug 2001 11:55:59 +0100 setserial (2.17-22) frozen unstable; urgency=low * devfs again - removed the wildcard part to the init.d script to support auto kernel devfs loading. (closes: #100015) -- Gordon Russell Mon, 11 Jun 2001 12:53:22 +0100 setserial (2.17-21) frozen unstable; urgency=low * Additional code to try and help out those people with devfs. (closes: #97607) -- Gordon Russell Wed, 16 May 2001 09:10:53 +0100 setserial (2.17-20) frozen unstable; urgency=low * I knew that the template file in -19 looked a little funny. All the language-specific characters were corrupted by the email process. This has now been corrected so you can set up setserial in english and portuguese. (closes: #92125) -- Gordon Russell Tue, 3 Apr 2001 09:06:18 +0100 setserial (2.17-19) frozen unstable; urgency=low * Added support for portuguese language in the template. This is supplied by Gustavo Noronha . I do not speak portuguese so Gustavo should be emailed with comments on this (and only this) part of setserial. (closes: #92125) -- Gordon Russell Fri, 30 Mar 2001 12:10:36 +0100 setserial (2.17-18) frozen unstable; urgency=high * Small typo in the templates file corrected. Fix for the grammar (not my strongest area) of the templates file. (closes: #78084) -- Gordon Russell Mon, 27 Nov 2000 11:20:50 +0000 setserial (2.17-17) frozen unstable; urgency=high * Add an option KERNEL to the list, which uses the KERNEL output rather than the serial.conf file. This may allow people to recover better from incorrect serial.conf entries. (closes: #66070) * Applied the patch from Matt Kraai concerning (extensive) spelling errors in setserial.8. (closes: #75946) * Applied a fix from Wichert Akkerman concerning the support for devfs in setserial. I have not tested this as I do not have devfs, but the change looks quite reasonable. My only worry is that devices will be duplicated. Could someone with devfs verify this? (closes: #72339) -- Gordon Russell Thu, 23 Nov 2000 12:37:56 +0000 setserial (2.17-16) frozen unstable; urgency=high * Due to the test-cycle, the last release of setserial was sitting in incoming for ages. This has resulted in bugs which are fixed in 2.17-15. For completeness, these are closed here. (closes: #64984, #65536) * Improve the grammer in a diagnostic message. (closes: #65520) * Menu options translated to lower-case rather than upper-case strings. (closes: #65561) -- Gordon Russell Fri, 16 Jun 2000 13:38:45 +0100 setserial (2.17-15) frozen unstable; urgency=high * I really blew 2.17-14 Anyway, the fix is changed so that on initial bootup, the modload triggers serial configuration automatically, and then the init.d script "start" causes the ports to be configured again. Hopefully this will not cause any serious side-effects. I have more carefully checked this fix. -- Gordon Russell Thu, 1 Jun 2000 11:53:19 +0100 setserial (2.17-14) frozen unstable; urgency=low * The module.conf entries for pre-remove of modules in kerneld is a null operation, although previous releases of setserial makes use of this function, in the hope that one day it actually works. However, if you currently unload and then reload the serial.o module, you lose all your serial configuration details until you run /etc/init.d/setserial start I have made a simple change to the configuration, so that failure of pre-remove is detected, and the serial ports on a module reload are reconfigured to the configuration present imediately after serial configuration has completed. This is not as good as pre-remove actually working, but is probably sufficient for all but the most nit-picking people out there. If you change your serial configuration a lot during a single boot session, consider calling /etc/init.d/setserial modsave from cron every minute or two (or at least before a module autoclean occurs). (closes: #64703) -- Gordon Russell Sat, 27 May 2000 17:45:48 +0100 setserial (2.17-13) frozen unstable; urgency=low * Spelling error in modutils/setserial (closes: #63775) -- Gordon Russell Tue, 9 May 2000 09:42:07 +0100 setserial (2.17-12) frozen unstable; urgency=low * I wanted to make the AUTOSAVE question priority "medium", but accidentally set it to "high". Fixed in this release. -- Gordon Russell Thu, 4 May 2000 15:06:45 +0100 setserial (2.17-11) frozen unstable; urgency=low * The grep commands in the postinst could cause the postinst to fail if there were no serial ports detected by setserial. This actually appears to be a possibility for the SPARC architecture, so I have protected against this using IF testing. (closes: #63448) * An additional issue raised by the above bug report is if you have an old serial.conf file and you have not yet gone through the process of being asked if you want autosave, then the answer to the question is basically ignored. I have fixed this in the postinst to work better... * I can now make use of dpkg-reconfigure, and it appears to work. * Unfortunately I had to add a new depconf template, and stop using one of the older ones. This means that many of you will have to respond to a question when you update to this setserial version. Sorry about that... You should find the default answer adequate. For now, I have set its priority to "medium". Should this be "low"? * Another side-effect of moving to debconf - stdout output in postrm causes the postrm to fail. I have removed all output to stdout and replaced it where necessary to stderr. Hopefully it will work a lot better now. Thanks to Joey Hess for giving me the fix... (closes: #62525) -- Gordon Russell Wed, 3 May 2000 10:59:47 +0100 setserial (2.17-10) frozen unstable; urgency=low * Changes by Josip Rodin: + Used debconf to display the warning when update-modules fails (thanks to Joey Hess), more properly closes: #59013, #59170. + Merged m68k and non-m68k postinsts into one, using a simple test, just like it's done in debian/config file. Updated some of the postinst messages. + Reordered debian/rules to actually install serial.conf.sparc on sparc, it was being rewritten by the default one. + Removed old comment about that RedHatoid RCLOCKFILE variable in init script, useless. Josip Rodin * Added a "|| true " to the db_input line Josip added to the postinst. This was needed to support error code 30 (already answered the question). -- Gordon Russell Mon, 28 Feb 2000 09:18:43 +0000 setserial (2.17-9) unstable frozen; urgency=low * debconf update was less than perfect. This release attempts to tackle the warning wrt update-modules properly. I have done this by removing the "wait for return" question from the postinst. I tried to do this using debconf, but there is no obvious way of doing it. (closes: #59013) * Duplicate bug report to 59013. (closes: #59170) -- Gordon Russell Mon, 28 Feb 2000 09:18:43 +0000 setserial (2.17-8) unstable frozen; urgency=low * More completely converted to debhelper. Used debconf to display information and ask questions. Fully updated for FHS and Policy 3.x. -- Josip Rodin Wed, 19 Jan 2000 14:04:39 +0100 (closes: #58442) * The ls command in /etc/init.d/setserial will print out the ttyS names of any serial ports from ttyS10 and up. Supplied patch fixed the problem from Robert de Bath (closes: #58559) -- Gordon Russell Mon, 21 Feb 2000 12:56:01 +0000 setserial (2.17-7) unstable frozen; urgency=low * Reports concerning the messages generated in the postinst. Personally I put them in to close an earlier report, but I will take them out again... (closes: #57866, #58022, #57910) -- Gordon Russell Mon, 14 Feb 2000 12:27:50 +0000 setserial (2.17-6) unstable frozen; urgency=low * 2.17-5 didnt fix the problem with bug 56787. I now have access to a m68k machine, and the problem is reall solved this time. Thanks to Roman Hodek for his efforts in helping me. (closes: #56787) -- Gordon Russell Fri, 11 Feb 2000 12:02:37 +0000 setserial (2.17-5) unstable frozen; urgency=low * Still does not compile for m68k. Hopefully I have it this time. (closes: #56787) -- Gordon Russell Thu, 10 Feb 2000 15:26:25 +0000 setserial (2.17-4) unstable frozen; urgency=low * pcmcia-cs has changed again. Apparently, bugs in serial.o in the kernel is breaking pcmcia, and the upstream maintainer now uses setserial to do some stuff to get around these bugs. However, I have patched Debian setserial to avoid doing things to pcmcia serial ports in order to close many of the pcmcia-related setserial bugs... I have therefore changed the way pcmcia filtering is done in setserial. Now, pcmcia devices are reported using -G, but the report ends with "pcmcia". This flag is ignored whereever it appears in a setserial configuration request. Thus, pcmcia devices are clearly marked, and are filtered out using grep in /etc/init.d/setserial. -- Gordon Russell Mon, 7 Feb 2000 10:23:47 +0000 setserial (2.17-3) unstable; urgency=low * I blundered when I changed to debhelper, and now I have multiple additions where #DEBHELPER# appears in the pre/post files. I have now added dh_clean, which hopefully fixes the problem. -- Gordon Russell Fri, 4 Feb 2000 09:26:15 +0000 setserial (2.17-2) unstable; urgency=low * m68kserial.h is no longer included automatically from serial.h in /usr/include/linux, so I have added a patch from Roman Hodek to manually select the include file if the build is for m68k. (closes: #56787) -- Gordon Russell Tue, 1 Feb 2000 13:20:20 +0000 setserial (2.17-1) unstable; urgency=low * New upstream version. - Added the usual mc68k patches. Upstream maintainer still has not added them for some reason. - Added pcmcia patches. * Changed reference /usr/doc to /usr/share/doc in documentation. (closes: #56533) * Changed to debhelper from debstd -- Gordon Russell Tue, 1 Feb 2000 11:45:54 +0000 setserial (2.15-18) unstable; urgency=low * Moved the serial port reporting part of /etc/init.d/setserial so that instead of reporting the state of all valid ports, it only reports the state of ports specifically mentioned in the /etc/serial.conf file. This is necessary as there appears to be a fatal error in the kernel/pcmcia-cs part of linux which means that reading state from a non-existant serial port results in pcmcia-cs being unable to use that port for pcmcia serial devices in the future... (closes: #56482) -- Gordon Russell Fri, 28 Jan 2000 12:41:48 +0000 setserial (2.15-17) unstable; urgency=low * Changing README.debian to README.Debian has broken debstd. Doing the work by hand this time rather than using debstd. (closes: #55724) -- Gordon Russell Thu, 20 Jan 2000 15:58:13 +0000 setserial (2.15-16) unstable; urgency=low * Complaint that it is too easy to destroy your serial configuration if something happens to the serial module and you have to reboot. This version of setserial only maintains serial.o persistent information in /var/run/setserial.conf, and this information is not preserved over reboots. The default is not to have AUTOSAVE in the serial.conf file, and instead on the first install of setserial all ports are saved once only. This may break the boot disks, but I hope not... (closes: #54966) * Add a wait for return prompt in postinst. (closes: #51972) * Added a test involving update-modules to the postrm (closes: #53802) * Removed a dependency to modutils * Add section and priority to control file using -isp * Updated readme files to reflect changes * Multiple Bug report - - postinst and prerm has /usr/doc and /usr/share handling removed as debstd now apparently does this automatically... - Added more detail to the readme explaining 0setserial.pre-2.15 - renamed README.debian to README.Debian (closes: #55294) -- Gordon Russell Thu, 13 Jan 2000 10:03:57 +0000 setserial (2.15-15) unstable; urgency=low * Initially, the setting for the ports is taken from /etc/serial.conf. However, this is probably not what you actually have on your machine. Instead, we now take whan the kernel says it your serial configuration, and save that in /etc/serial.conf on the first reboot or serial.o module unload. (closes: #50604, #51372) -- Gordon Russell Mon, 29 Nov 1999 12:57:13 +0000 setserial (2.15-14) unstable; urgency=low * pcmcia-cs 3.1.2-1 has changed the location of the stab file from one location to two (three, including backward compatibility). Setserial looks in all three locations, and collates the information from all stab files found in order to decide if the device in question is to be controlled by serial.o or pcmcia-cs. This should automatically fix problems due to serserial claiming ports from pcmcia devices. (closes: #49550) -- Gordon Russell Mon, 8 Nov 1999 11:53:27 +0000 setserial (2.15-13) unstable; urgency=low * -- Gordon Russell Mon, 18 Oct 1999 18:09:30 +0100 setserial (2.15-12) unstable; urgency=low * Made the postinst script question easier to understand (I hope). (closes: #47697) * If the user has a non-standard module configuration, then setserial- induced error messages concerning update-modules may be lost. setserial now pauses if update-modules exits abnormally. (closes: #47698) -- Gordon Russell Mon, 18 Oct 1999 11:49:07 +0100 setserial (2.15-11) unstable; urgency=low * Added support for /usr/doc and /usr/share/doc automatic linkage -- Gordon Russell Wed, 6 Oct 1999 09:34:56 +0100 setserial (2.15-10) unstable; urgency=low * Error message displayed when you postinst with a setup without update-modules is now hidden from the user. (closes: #41546) * Recomplation now supports the 16750 uart on the latest kernels. (closes: #44484) -- Gordon Russell Tue, 7 Sep 1999 13:46:07 +0100 setserial (2.15-9) unstable; urgency=low * The bug reports are starting to back up now. Sorry for any delay. This release is more experimental than usual. PCMCIA users please investigate with a little caution. The routines which protected you have been removed from the control script and put into the C code. * The patch to make compilation on sparcs and alphas was not applied correctly. It was broken anyway. I have now read the manual on autoconf and fixed it. Hope this is better for everyone... (closes: #40051) * setserial does not check for the existence of update-modules - I use this in the postinst file, to support module loading and unloading from the kernel. Although modutils is "required", and thus I should not have to worry about it not being there, in truth if the serial module is hardwired in the kernel, then it will never be unloaded, and thus I do not really need modutils. So I will agree with the bug submitter, and ignore its absence if that is the case. (closes: #40957) * In the postinst file for i386, I talk about saving when you "logout". I really ment to say "shutdown or halt your machine". (closes: #40993) * Apparently the setserial as supplied from upstream does not AUTOSAVE all the needed information to make a successful reload of all useful data. I have edited the setserial.c code to do it properly, and send the changes upstream. A moan about the size of the /etc/init.d/setserial file was present. Personally I don't see why it matters, but I have recoded much of the code in c and put it into the executable. Again I will forward the changes upstream. Of course, this is likely to produce even more bug reports... Please try to put only one bug in each report. This one griped about a few things, which makes it hard to close. However, everything else is really wishlist stuff so I am making the bold step of closing it anyway. If people are unhappy they should resubmit the bugs seperately... The additional problems were: o manual page does not contain some useful information which is only found in the docs - wishlist stuff, and maintaining a changed manual page when the upstream maintainer changes is frequently is not my idea of fun. o complaint that if root sets the wrong configuration on the serial ports, shutdowns and then reboots, then wrong configuration is still there - root is a dangerous user and I don't know what to do to make it safer! (closes: #40964, #40965) (duplicated reports) -- Gordon Russell Tue, 13 Jul 1999 10:25:00 +0100 setserial (2.15-8) unstable; urgency=low * Up to now, the serial module in the kernel can be unloaded and reloaded by both kerneld and kmod dynamically whenever the system desires. I had thought that all the setserial settings made to serial ports would persist between unloads and reloads of the serial module. Apparently this is not the case, and so I have added some additions which means that "/etc/init.d/setserial stop" is called when the serial module is unloaded, and "/etc/init.d/setserial start" is called when the serial module is loaded. Hopefully this will solve this issue. Note however that if you have switched off AUTOSAVE in the serial.conf file, then the settings will be lost when the module is unloaded, and the settings stored in serial.conf will be the ones loaded into the serial module when it is next loaded into the kernel. Personally, serial is never unloaded for me as I use both gpm and X, which uses the serial module all the time. Thus the testing I have performed on this has been less than ideal. However, it should work as advertised. I wasn't sure how to log the output, so if someone wants to check that out and raise a report if I got it wrong that would be useful. (closes: #39441) -- Gordon Russell Wed, 7 Jul 1999 11:46:35 +0100 setserial (2.15-7) unstable; urgency=low * Tackled the pcmcia modem/serial card problem. The init.d script is now exceptionally long-winded, and does every check I can think of to make sure that the serial device setserial is controlling is not a pcmcia device. It does the following in addition to the upstream methods: (1) AUTOSAVE now does not save ports which are UART "unknown" (2) a serial port must be /dev/ttyS? or /dev/ttyS?? (3) if the I/O address of a port is within an I/O window as reported by "cardctl config", it is not saved (4) if the device is listed in /var/run/stab, do not save it. Hopefully everything will now work as intended. People with pcmcia problems due to an earlier version of 2.15 will have to do some repairs (check out pcmcia.repair). closes: #40471 -- Gordon Russell Thu, 1 Jul 1999 13:20:04 +0100 setserial (2.15-6) unstable; urgency=low * Problems with the copyright message and README.debian #40043 Corrected the URLs in question. * #40109, #40051 - Problems with alpha and sparc builds Added the supplied patch to configure.in and then did an autoconf * Still struggling to fix the pcmcia problems, so a new version is coming soon. Fixed: #40043, #40109, #40051 -- Gordon Russell Thu, 24 Jun 1999 08:50:37 +0100 setserial (2.15-5) unstable; urgency=low * When AUTOSAVE is taken out of the config file, it falls over #39279 #39724 - Added a patch from Oskar Liljeblad * Moving the old config file to /var/tmp could be a security hole. #29434 - File is renamed in the same directory with the extension .pre-2.15 * Blank lines in the config file are not handled properly #38764 - Uses a patch from Patrik Rak - Thanks... * Still more problems wrt pcmcia card-based modems. #39382 - Added information into postinst and README.debian instructing pcmcia serial-type card owners to edit the file themselves. -- Gordon Russell Mon, 21 Jun 1999 09:39:44 +0100 setserial (2.15-4) unstable; urgency=low * Bug #38131 - the new autosaving of serial port configuration broke pcmcia-cs. I changed /etc/init.d/setserial so that saving state does, by default, save only "known" ports, rather than all ports present as "/dev/ttyS*" files. -- Gordon Russell Wed, 26 May 1999 10:25:07 +0100 setserial (2.15-3) unstable; urgency=low * used "make clean" rather than "make distclean". Should be better for all you users wanting to compile your own version. This should make things better for the mc68k and sparc people too... -- Gordon Russell Fri, 21 May 1999 15:39:51 +0100 setserial (2.15-2) unstable; urgency=low * Bug #38083 - mc68xxx port checked and unnecessary config removed. I had to rewrite rc.serial.mc68k and some debian/ files to do this. -- Gordon Russell Fri, 21 May 1999 15:09:04 +0100 setserial (2.15-1) unstable; urgency=low * New upstream version. I was unable to check the mc68000 patches. Someone on the mc68000 team will have to do this instead. The new release uses a completely new configuration procedure, so be on your guard... Bug #31542 - problems using -W : the new config does not use -W (fixed) Bug #34637 - sparc problems : you have your own serial.conf (fixed) Bug #13682 - very old version : if this is still true reopen (closed) Bug #30696 - autoconfigure in man is autoconfig in prog (fixed) Bug #32434 - use init.d not rc.boot - If it makes you happy... (fixed) Bug #36487 - infinte to infinite in setserial.c (fixed on Debian only) Bug #36488 - duplicate of bug 36487 Bug #36489 - duplicate of bug 30696 -- Gordon Russell Wed, 19 May 1999 16:59:38 +0100 setserial (2.14-3) unstable; urgency=low * Now uses supplied ./configure, with installation from rules file, rather than from hand-crafted Makefile. This should allow it to be more easily compiled on the Alpha. - Bug #25865,#25379 -- Gordon Russell Wed, 9 Sep 1998 15:16:24 +0100 setserial (2.14-2) unstable; urgency=low * Changed "configuring serial ports....done." to "configuring serial ports...done.", fixing bug #24755. -- Gordon Russell Mon, 20 Jul 1998 09:27:57 +0100 setserial (2.14-1) unstable; urgency=low * new upstream version. This fixes bug #23966. I have readded the mc68000 patches to the new version of setserial to the best of my ability, but without someone to test these I have no way of knowning if this was successful. -- Gordon Russell Tue, 30 Jun 1998 10:50:32 +0100 setserial (2.12-7) unstable; urgency=low * Fixed bug #21286 - If the setserial package has been uninstalled, then the configuration file could still be present. There is a check in the config file, which aborts configuration if the package is not installed. * Fixed bug #23162 - part of this bug report was that status information for the ports appeared in the wrong order, and that ports which were unconfigured but present caused a huge list of messages to appear which were not relevent to the user. This has been tided up. * Fixed bug #21658 and #23162 - kernel 2.1 and above does not allow wild initialisation of the serial port. For now, I force-load the serial driver module, discarding any error messages. This should improve the situation, but I have yet to test this. -- Gordon Russell Tue, 12 May 1998 11:28:05 +0100 setserial (2.12-6) unstable; urgency=low * Fixed bug #15421 wrt compressing the changes file * Fixed bug #14064 for 680x0 compilation -- Gordon Russell Wed, 22 Oct 1997 09:34:24 +0100 setserial (2.12-5) unstable; urgency=low * Fixed bug #11398 - Now works with ash. -- Gordon Russell Fri, 3 Oct 1997 10:46:51 +0100 setserial (2.12-4) unstable; urgency=low * uses libc6 -- Gordon Russell Mon, 9 Jun 1997 15:48:59 +0100 setserial (2.12-3) unstable; urgency=low * Fixed bug #8401 - Hope the output is less ugly now... * Fixed bug #8764 for Alpha platforms -- Gordon Russell Thu, 17 Apr 1997 09:39:22 +0100 setserial (2.12-2) unstable; urgency=low * Fixed bug #7685 -- Gordon Russell Thu, 27 Feb 1997 12:35:47 +0000 setserial (2.12-1) unstable; urgency=low * New upstream version. I have tried to repatch this release with the * changes from previous debian releases, but some things have changed * and I am not 100ure I have them all -- Gordon Russell Thu, 19 Feb 1997 09:47:44 +0000 setserial (2.10-12) unstable; urgency=low * m68k packages will have a different 0setserial config file * Support for serial devices defined in m68k machines added -- Gordon Russell Thu, 13 Feb 1997 09:47:44 +0000 setserial (2.10-11) unstable; urgency=low * Due to the number of bug reports concerning bootup failures during setserial, * I have removed all but com1 and 2 from the automatic configuration process. I * suggest that if you have a more complex setup, you edit this file by hand. * Com[1-2] is set to the standard port and irq, but uart probing is still done -- Gordon Russell Thu, 23 Jan 1997 15:36:40 +0000 setserial (2.10-10) unstable; urgency=low * Added tests to make sure their is a serial module driver loaded * Switched to the new source layout -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-9) unstable; urgency=low * Brought the Debian maintenance files up to date. -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-8) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-7) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-6) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-5) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-4) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-3) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-j) unstable; urgency=low * Bug fixes in the maintenance files -- Gordon Russell Wed, 22 Jan 1997 12:23:53 +0000 setserial (2.10-1) unstable; urgency=low * Initial Release. -- Gordon Russell Wed, 22 Jan 1997 11:22:25 +0000