wpasupplicant (2:2.6-19) unstable; urgency=medium With this release, wpasupplicant no longer respects the system default minimum TLS version, defaulting to TLSv1.0, not TLSv1.2. If you're sure you will never connect to EAP networks requiring anything less than 1.2, add this to your wpasupplicant configuration: tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1 wpasupplicant also defaults to a security level 1, instead of the system default 2. Should you need to change that, change this setting in your wpasupplicant configuration: openssl_ciphers=DEFAULT@SECLEVEL=2 Unlike wpasupplicant, hostapd still respects system defaults. -- Andrej Shadura Sat, 15 Dec 2018 14:22:18 +0100 wpasupplicant (0.6.2-1) unstable; urgency=low The -w (wait for network interface to exist) command line option no longer exists. If you have scripts that require this option, it is time to change them, or use one of the two supported modes of operation explained at /usr/share/doc/wpasupplicant/README.modes.gz. ifupdown supports hot-plugged network devices via the "allow-hotplug" class of operation. An example /etc/network/interfaces configuration stanza would look like: allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid myssid wpa-psk mysecretpassphrase network-manager is also able to handle hot-plugged network devices. -- Kel Modderman Mon, 14 Jan 2008 18:02:17 +1000