cpufrequtils (008-1.1) unstable; urgency=medium
* Non-maintainer upload.
[ Niels Thykier ]
* Set Rules-Requires-Root to "no".
* Replace usage of "dh_clean -k" with "dh_prep".
* Remove redundant/empty postinst and postrm from the packages.
* Bump debhelper compat to 12.
- Pass --no-restart-after-upgrade to dh_installinit to maintain
the previous behaviour of the maintscripts.
- Add Pre-Depends on ${misc:Pre-Depends}.
[ Breno Leitao ]
* Remove the package binary package for Power architecture, since Power CPU
family uses linux-cpupower to handle the machine Power management unit.
(Closes: #889895)
[ Helmut Grohne ]
* Fix FTCBFS: pass CROSS= to Makefile. (Closes: #793913)
-- Niels Thykier <niels@thykier.net> Sun, 30 Dec 2018 22:29:38 +0000
cpufrequtils (008-1) unstable; urgency=low
* Package the last available upstream vesion of cpufrequtils. Anything
after this should really be cpupowerutils (closes: 639454).
* Include all the work also pending the in the git repository as patches
on top of version 008.
* Upstream fixed po.DE (closes: #633307).
* Enable static library building as upstream disabled it.
* Load powernow-k8 for AMD Bulldozer (21) and Llano (18) (closes: #654957).
* Do not update po files upon building (closes: #651415).
-- Mattia Dongili <malattia@debian.org> Sun, 06 May 2012 08:23:44 +0900
cpufrequtils (007-2) unstable; urgency=low
* Bulk load only helper modules. Linux 3.0 shuffled cpufreq modules
locations a bit and now cpu drivers and helpers are in the same directory
(closes: #636141).
* Use modprobe -b in loadcpufreq to honour blacklisted modules
(closes: #592488).
* Load powernow-k8 for AMD family 20 (i.e. AMD E-350 cpus)
(closes: #627811).
* Stop changing printk levels when loading cpufreq modules (closes: #624575
and closes: #596235).
-- Mattia Dongili <malattia@debian.org> Wed, 03 Aug 2011 18:13:41 +0900
cpufrequtils (007-1) unstable; urgency=low
* New upstream version
* Load acpi_cpufreq instead of e_powersaver on VIA C7s (closes: #566214 and
closes: #579091)
* loadcpufreq should start after syslog (closes: #578639)
* Remove stop symlinks in runlevel 0 1 6 on upgrades (closes: #498717)
* Start loadcpufreq on install (closes: #544098)
* Add a homepage link in the control file for cpufrequtils (closes: #579089)
* Remove patches included upstream, refresh the rest
* Switch to dpkg-source 3.0 (quilt) format
* Bump Standards-Version and check for file existence before including it
in loadcpufreq (lintian warnings)
-- Mattia Dongili <malattia@debian.org> Sat, 15 May 2010 20:04:34 +0900
cpufrequtils (006-2) unstable; urgency=low
* Grrr! fix the stop scripts removal condition
-- Mattia Dongili <malattia@debian.org> Sat, 21 Nov 2009 23:44:09 +0900
cpufrequtils (006-1) unstable; urgency=low
* New upstream version
* Fix the errors in the extended description (closes: #543679).
* Re-generate the symbols file (closes: #552344).
* Use upper-case for the CPU aronym (closes: #493174).
* Remove the unused stop links in /etc/rc[016].d (closes: 498717)
* Bump Standards-Version to latest (3.8.3).
* Add cpufreq-aperf manpage and pull quilt as a dependency to add patches.
* Pull a fix from the upstream repository to fix reading of /proc/stat in
cpufreq-aperf (6657831200419d7509edcc04434d03b994c86adb).
-- Mattia Dongili <malattia@debian.org> Fri, 20 Nov 2009 20:24:47 +0900
cpufrequtils (005-1) unstable; urgency=low
* New upstream version
* Always load acpi-cpufreq on Intel CPUs with the est flag (Closes: #502431)
* Load the powenow-k8 module for AMD family 17, Laszlo Kajan
<kajla76@gmail.com> (Closes: 523839)
* Removed libsysfs dependency, not needed anymore
-- Mattia Dongili <malattia@debian.org> Sun, 26 Apr 2009 15:15:11 +0900
cpufrequtils (004-2) unstable; urgency=low
* Load powernow-k8 for Phenom AMD CPUs (Closes: #491299)
-- Mattia Dongili <malattia@debian.org> Sat, 19 Jul 2008 15:10:07 +0900
cpufrequtils (004-1) unstable; urgency=low
* New upstream version
* Ack previous NMUs (Closes: #470062) (Closes: #464636) (Closes: #468483)
(Closes: #468655)
* removed dependency on libsysfs as the upstream code doesn't need
it anymore
-- Mattia Dongili <malattia@debian.org> Wed, 16 Jul 2008 20:54:15 +0900
cpufrequtils (002-7.2) unstable; urgency=low
* Non-maintainer upload with consent from Mattia Dongili.
* Fix typo in call to dh_installinit (Closes: #470062)
-- Petter Reinholdtsen <pere@debian.org> Sat, 8 Mar 2008 23:32:26 +0100
cpufrequtils (002-7.1) unstable; urgency=low
* Non-maintainer upload with consent from Mattia Dongili.
* Fix bashism in init.d/loadcpufreq (Closes: #464636)
* Make sure update-rc.d is called in dependency order to
work with insserv. Depend on debhelper >= 6 for this to work
properly (Closes: #468483)
* Correct LSB dependnecy information (Closes: #468655)
-- Petter Reinholdtsen <pere@debian.org> Sat, 8 Mar 2008 11:44:08 +0100
cpufrequtils (002-7) unstable; urgency=low
* Set ENABLE=true by default in loadcpufreq.init (Closes: #457753)
* use /proc/stat to get the list of cpus for which we need to set the
default governor/limits at boot in cpufrequtils.init (Closes: #457931)
-- Mattia Dongili <malattia@debian.org> Sun, 30 Dec 2007 11:39:18 +0900
cpufrequtils (002-6) unstable; urgency=low
* in loadcpufreq.init:
- Support VIA C7 (model_id 10) (Closes: #429269)
- Redirect to stderr correclty (Closes: #431690)
- Only check for sysfs file existence as we don't know exactly which
governors are really available (Closes: 431922)
- redirect stderr on modprobe and say that no module has been loaded if
that is the case, patch from Kel Modderman (Closes: #428248)
* set policy earlier to avoid overriding policy daemons (Closes: #433202)
* use cpufreq-info to determine the available CPUs, patch from Kel Modderman
(Closes: #449307)
* document ordering of init.d scripts in LSB header, patch from Petter
Reinholdtsen (Closes: #451482)
* handle DEB_BUILD_OPTIONS=nostrip in debian/rules (Closes: #436673)
* allow disabling and/or overriding loadcpufreq (Closes: #440915)
* clarify the package description stating this package also enable active
cpu control at boot time (Closes: #433203)
* bump Standards-Version to 3.7.3
* unignore $(MAKE) clean errors as it actually should never fail in normal
conditions for this package (lintian warning)
* describe the usage of /etc/default/loadcpufreq in README.Debian
-- Mattia Dongili <malattia@debian.org> Mon, 24 Dec 2007 14:15:47 +0900
cpufrequtils (002-5) unstable; urgency=low
* fix loadcpufreq script to avoid using laptop-detect as the result
of its invocation was not used (Closes: #428172).
* output the name of the driver used at startup.
-- Mattia Dongili <malattia@debian.org> Sun, 10 Jun 2007 11:30:31 +0900
cpufrequtils (002-4) unstable; urgency=low
* Enable by default if cpufreq kernel module is loaded thanks
to Peter Reinholdtsen for the base code/idea (Closes: #426138)
-- Mattia Dongili <malattia@debian.org> Thu, 31 May 2007 00:29:39 +0900
cpufrequtils (002-3) unstable; urgency=low
* Acknowledge NMUs (Closes: #412184) (Closes: #423991)
* Fix typo in loadcpufreq (Closes: #426067)
* Add a sample /etc/default/cpufrequtils for the user reference.
-- Mattia Dongili <malattia@debian.org> Sat, 26 May 2007 10:55:52 +0900
cpufrequtils (002-2.2) unstable; urgency=low
* Non-maintainer upload with maintainers approval.
* Correct debconf value name used in previous changelog. The
preseed template name is cpufrequtils/enable, not
cpufrequtils/active-on-boot.
* Add a small section in README.Debian on how to use it.
-- Petter Reinholdtsen <pere@debian.org> Fri, 25 May 2007 15:43:32 +0200
cpufrequtils (002-2.1) unstable; urgency=low
* Non-maintainer upload with maintainers approval.
* Add init.d/loadcpufreq to detect and load the needed kernel
modules. Based on code from powernowd in Ubuntu, combined into
one script and slightly modified to prefer acpi-cpufreq over
speedstep-centrino with kernels 2.6.20->. (Closes: #423991)
* Improve wording in README.Debian. Based on suggestion from Pete
Boyd. (Closes: #412184)
* Make init.d script accept the same speed values in
default/cpufrequtils as cpufreq-set. Patch from Bernd Feige.
(Closes: #392572)
* Move default values for init.d/cpufrequtils into the script, and
drop /etc/default/cpufrequtils as a conffile to ease
autoconfiguration and upgrades when the default values changes.
* Add hidden boolean debconf value cpufrequtils/enable to
enable the ondemand governor during installation. Add lintian
overrides to ignore lintian warnings about hidden debconf
questions.
* Add provides line to the LSB header in init.d/cpufrequtils to keep
lintian and insserv happy.
* Remove runlevels from the LSB header default-stop, as the init.d
script do not stop anything.
-- Petter Reinholdtsen <pere@debian.org> Fri, 25 May 2007 14:52:20 +0200
cpufrequtils (002-2) unstable; urgency=low
* Be Sarge's sed compliant, thanks to Peter Palfrader. (Closes: #378482)
-- Mattia Dongili <malattia@debian.org> Fri, 11 Aug 2006 13:34:09 +0200
cpufrequtils (002-1) unstable; urgency=low
* New upstream release.
* Set cpufreq values for all available cpus. (Closes: #364547)
* Bump Standards-Version to latest (3.7.2).
-- Mattia Dongili <malattia@debian.org> Thu, 01 Jun 2006 20:05:06 +0200
cpufrequtils (001-2) unstable; urgency=low
* Fix libcpufreq.la braindamaged rpath.
-- Mattia Dongili <malattia@debian.org> Sun, 09 Apr 2006 09:31:01 +0200
cpufrequtils (001-1) unstable; urgency=low
* New upstream release.
* Fix orthographical error in README.Debian (closes: #348549).
* Fix lack of newline on an error message (closes: #352601).
-- Mattia Dongili <malattia@debian.org> Mon, 27 Mar 2006 22:04:37 +0200
cpufrequtils (0.4-2) unstable; urgency=low
* Build against libsysfs2 (closes: #347630).
* Fix wording in README.Debian (closes: #348549).
-- Mattia Dongili <malattia@debian.org> Sun, 12 Feb 2006 14:09:49 +0100
cpufrequtils (0.4-1) unstable; urgency=low
* New upstream release.
* changed '==' to '=' to make dash happy (and the init script
POSIX compliant) (closes: #323429).
* Upstream applied the po correction (closes: #314134).
-- Mattia Dongili <malattia@debian.org> Tue, 20 Dec 2005 21:47:38 +0100
cpufrequtils (0.3-2) unstable; urgency=low
* Added init and default scripts to allow the user set a governor
on boot (closes: #311604).
-- Mattia Dongili <malattia@debian.org> Sat, 02 Jul 2005 00:27:34 +0200
cpufrequtils (0.3-1) unstable; urgency=low
* New upstream release.
-- Mattia Dongili <malattia@debian.org> Tue, 10 May 2005 19:52:14 +0200
cpufrequtils (0.2-1) unstable; urgency=low
* New upstream release.
* Changed maintainer's address to the @d.o one.
-- Mattia Dongili <malattia@debian.org> Sun, 20 Mar 2005 12:03:39 +0100
cpufrequtils (0.1-1) unstable; urgency=low
* Initial Release. (closes: #278767)
-- Mattia Dongili (ma.d.) <dongili@supereva.it> Sun, 28 Nov 2004 17:26:30 +0100