lbcd (3.5.2-4) unstable; urgency=medium * QA upload. * Update Vcs-* headers to point to salsa.debian.org * Remove unnecessary --parallel (since dh compat level 11) * Build-Depend: pkgconf in place of transitional pkg-config * Let systemd.pc decide place for systemd system unit files * Remove compression format override * Update lintian-overrides to avoid mismatch -- Chris Hofstaedtler Sat, 09 Dec 2023 14:39:07 +0100 lbcd (3.5.2-3) unstable; urgency=medium * Orphan package. Note that it is also orphaned upstream. * Update to debhelper compatibility level V11. - Remove now-unnecessary dh-autoreconf and dh-systemd dependencies. - Remove explicit configuration of autoreconf and systemd sequences. * Update standards version to 4.1.3. - Remove support for NO_START in the init script. There was already logic in place to disable the init script when upgrading from older versions that supported NO_START. - Use update-rc.d defaults-disabled when upgrading from older versions. - Use https URLs in debian/copyright. - Remove upstart configuration. * Set Rules-Requires-Root: no. * Use https URL in debian/watch. * Remove trailing whitespace from debian/changelog. -- Russ Allbery Fri, 29 Dec 2017 13:55:17 -0800 lbcd (3.5.2-2) unstable; urgency=medium * Drop now-unnecessary dependency on sysv-rc, satisfied by stable and intended for upstart support (which is now obsolete in unstable). * Switch to the DEP-14 branch layout and update debian/gbp.conf and Vcs-Git accordingly. (Closes: #829547) * Add explicitly nonexistent directory as home for adduser invocation. * Run wrap-and-sort -ast on the packaging files. * Switch to https URLs for Vcs-* and Homepage. * Refresh upstream signing key. * Update standards version to 3.9.8 (no changes required). -- Russ Allbery Thu, 14 Jul 2016 18:25:36 -0700 lbcd (3.5.2-1) unstable; urgency=medium * New upstream release. - Detect libsystemd instead of libsystemd-daemon. (Closes: #779779) * Refresh upstream signing key. * Update standards version to 3.9.6 (no changes required). -- Russ Allbery Sun, 26 Apr 2015 17:15:58 -0700 lbcd (3.5.1-2) unstable; urgency=medium * Increase the buffer size for network client timeout tests, hopefully fixing FTBFS on arm64. * Switch to debian/upstream/signing-key.asc for the upstream signing key location and use an armored key to avoid needing include-binaries. * Prefer *.tar.xz in debian/watch to match packaging. * Fix Upstream-Contact email address in debian/copyright. * Add debian/gbp.conf reflecting the branch layout of the default packaging repository. -- Russ Allbery Sun, 24 Aug 2014 00:39:40 -0700 lbcd (3.5.1-1) unstable; urgency=low * New upstream release. - Mark lbcd listening sockets as close-on-exec. - Document systemd environment variables and add examples section. -- Russ Allbery Fri, 03 Jan 2014 22:17:56 -0800 lbcd (3.5.0-4) unstable; urgency=low * Switch the lbcd systemd configuration to Type=simple. There's no need for startup notification for this service when using socket activation. Link the service with lbcd.socket using Also and Requires. * Fix a typo in the lbcd systemd service that referenced a misspelled version of multi-user.target. * Weaken the sanity check on user_mtime to allow for a result of zero, which should fix build issues on the Debian mips buildds. * Remove now-unnecessary comment about the conversion of NO_START to a disabled service on upstart. Add a dependency on sysv-rc 2.88dsf-45 or later, which added update-rc.d disable support for upstart. -- Russ Allbery Sun, 29 Dec 2013 12:56:35 -0800 lbcd (3.5.0-3) unstable; urgency=low * Restrict the libsystemd-daemon-dev build dependency to linux-any. * Remove one unnecessary Lintian override about redirecting update-rc.d output. -- Russ Allbery Sat, 28 Dec 2013 19:58:45 -0800 lbcd (3.5.0-2) unstable; urgency=low * Patch the upstream-provided service unit to set user and group to lbcd. Upstream's unit file cannot assume any particular user exists, so this has to be handled in distribution packaging. * Add setuid and setgid directives to the upstart configuration. -- Russ Allbery Sat, 28 Dec 2013 17:42:16 -0800 lbcd (3.5.0-1) unstable; urgency=low * New upstream release. - lbcd no longer allows the client to ask for arbitrary supported service probes. Instead, all services for which probes should be permitted must be explicitly specified with the -a option, which can be set in /etc/default/lbcd in DAEMON_OPTS. - lbcd -s and -r to stop and restart lbcd have been dropped. - lbcd no longer writes a PID file by default. This is handled by the Debian init script already. - lbcd removes its PID file on exit if it wrote one. - lbcdclient has been completely rewritten in modern Perl and now supports IPv6 queries. The output format is entirely different and should be more readable. It no longer takes multiple servers to query, supports long options, supports configuring the timeout and port, and exits with an error if it cannot reach a server within the timeout period. - lbcd supports a new -f option to run in the foreground while still logging to syslog. - lbcd -l now behaves as intended and logs each client request. - lbcd now ignores SIGHUP (since there's no configuration to reload) and exits cleanly on SIGTERM and SIGINT. - lbcd now supports IPv6 and multiple bind addresses (the -b option). - lbcd now considers there to be a user on console if any of the users come from an "address" that starts with ":0". - systemd socket activation and synchronization support has been added, as has a -Z option to raise SIGSTOP for upstart synchronization. * Remove the -P option from /etc/default/lbcd. This isn't useful for upstart and systemd, and the init script requires a specific setting, so it is now set directly in the init script. This option should be removed on upgrades; if not, the daemon may not start under systemd or upstart, since they will not create the (now-unnecessary) directory for the PID file. * The NO_START option in /etc/default/lbcd is no longer supported. On upgrade, it will be converted into update-rc.d lbcd disable, which will disable daemon startup in systemd and sysvinit. upstart users will need to manually disable the daemon since the update-rc.d disable interface currently doesn't support upstart. * systemd and upstart are now supported with native service configuration. Socket activation is used on systems running systemd. Continue to use DAEMON_OPTS in /etc/default/lbcd to configure the behavior of lbcd for the time being to ensure compatibility between the init systems and a clean upgrade path. * The init script now exits non-zero if run on a system booted with upstart per Policy 9.11.1. * Remove the start parameters to dh_installinit. These are now ignored by the dependency-based init system and produce warnings on postinst execution. -- Russ Allbery Sat, 28 Dec 2013 16:19:16 -0800 lbcd (3.4.2-1) unstable; urgency=medium * New upstream release. - Use getutxent in preference to get getutent. - Support FreeBSD (and Debian GNU/kFreeBSD) if /proc is mounted. * Add necessary keyring and watch configuration for uscan to verify PGP signatures on new upstream releases. * Remove now-unnecessary override of dh_builddeb to use xz compression. * Update standards version to 3.9.5 (no changes required). -- Russ Allbery Tue, 17 Dec 2013 16:37:40 -0800 lbcd (3.4.1-3) unstable; urgency=low * Apply upstream patch to add AM_PROG_AR to configure.ac, now apparently required by Automake for the binutils in unstable. (Closes: #713291) * Apply upstream patch to build with largefile support. This is probably pointless for this module, but consistency is good. * Apply upstream patch to fix the buffer size for network timeout tests, fixing test failures with newer Linux kernels. -- Russ Allbery Sun, 23 Jun 2013 13:29:33 -0700 lbcd (3.4.1-2) unstable; urgency=low * Upload to unstable. -- Russ Allbery Sat, 11 May 2013 17:02:56 -0700 lbcd (3.4.1-1) experimental; urgency=low * New upstream release. - If /etc/nolbcd exists, force the weight of the default service to the maximum without regard to the normal calculation. - Document lbcd -t and fix the output for sign issues. - Stop rewriting maximum weights in lbcdclient to -1. - Document lbcd handling of /etc/nologin. -- Russ Allbery Thu, 28 Mar 2013 14:59:43 -0700 lbcd (3.4.0-2) experimental; urgency=low * Pass $DAEMON_OPTS to lbcd when starting. * Tell update-rc.d to not create stop links by default. -- Russ Allbery Fri, 21 Sep 2012 00:28:45 -0700 lbcd (3.4.0-1) experimental; urgency=low * New upstream release. - Update the LDAP check to do something more reasonable. - Fix the HTTP check to correctly verify the server status, and allow any 20x or 30x status code as a success. Previously, any status code response would have accidentally been considered a success. - Fix possible memory overwrite and security issue when run on a system with more than 512 unique logged-in users. * Rewrite the init script. - Use LSB functions for output and logging. - Add a status action. - Be more correct about the exit status. - Remove the PID file after stop. - Remove set -e to avoid spurious init script failures. * Remove old init script failure workaround. We no longer need to worry about upgrades from old init scripts that failed if lbcd couldn't be stopped. The old versions were never in Debian. * Use set -e in maintainer scripts. * Always create the lbcd user if missing, even on postinst maintainer script actions other than configure. * Improve comments in /etc/default/lbcd. * Update to debhelper compatibility level V9. - Switch to debhelper rule minimization. - Enable hardening flags. - Add ${misc:Depends} and ${perl:Depends} to dependencies. * Switch to xz compression for the upstream source, Debian tarball, and binary packages. * Use dh-autoreconf to rebuild the build system. * Enable parallel builds. * Mark lbcd as Multi-Arch: foreign. * Add Homepage, Vcs-Git, and Vcs-Browser control fields. * Update Debian source package format to 3.0 (quilt). * Rewrite debian/copyright in copyright-format 1.0. * Update standards version to 3.9.4. -- Russ Allbery Thu, 20 Sep 2012 23:42:51 -0700 lbcd (3.3.0-1) unstable; urgency=low * [4107c5d] Imported Upstream version 3.3.0 * [965cd57] create a pid dir since lbcd runs non root * [db4ed40] bump standards version -- Guido Guenther Wed, 17 Sep 2008 10:06:02 +0200 lbcd (3.2.6-3) unstable; urgency=low * Upload to unstable (Closes: #488372) -- Guido Guenther Mon, 30 Jun 2008 18:55:49 -0300 lbcd (3.2.6-2) unstable; urgency=low * [0c80707] add myself to uploaders * [ef07945] init script: add LSB header * [e150623] start lbcd by default * [78b3ac6] don't run lbcd as root -- Guido Guenther Sat, 28 Jun 2008 00:04:49 +0200 lbcd (3.2.6-1) unstable; urgency=low * New upstream release. * Don't fail on stop and restart actions in the init script if lbcd was not already running. * Ignore failures in prerm from the old init script, since it will fail if lbcd couldn't be stopped. * Update standards version to 3.7.2 (no changes required). -- Russ Allbery Tue, 16 May 2006 12:01:08 -0700 lbcd (3.2.5-1) unstable; urgency=low * New upstream release. - Fix a bug in using external commands to generate weights. * Add a watch file. -- Russ Allbery Mon, 10 Apr 2006 20:51:34 -0700 lbcd (3.2.4-1) unstable; urgency=low * New upstream release. - Document behavior on systems with multiple interfaces. * General debian/rules cleanup. * Update debian/copyright to my current format. * Update to standards version 3.6.2 (no changes required). * Update maintainer address. -- Russ Allbery Fri, 17 Mar 2006 23:26:43 -0800 lbcd (3.2.3-1) unstable; urgency=low * New upstream release adding the -b option to lbcd. -- Russ Allbery Thu, 24 Feb 2005 20:02:29 -0800 lbcd (3.2.2-1) unstable; urgency=low * New upstream release. - Improved documentation. -- Russ Allbery Tue, 16 Nov 2004 14:40:48 -0800 lbcd (3.2.1-1) unstable; urgency=low * New upstream release. - Fixes -R mode on Linux when responding to v2 queries. -- Russ Allbery Thu, 16 Sep 2004 16:12:51 -0700 lbcd (3.2.0-1) unstable; urgency=low * Initial release. -- Russ Allbery Thu, 19 Aug 2004 17:30:18 -0700