linux-atm (1:2.5.1-4) unstable; urgency=medium * QA upload. * Fixup build failures with new kernel and glibc versions. * Bump std-version to 4.4.0, no changes required -- Gianfranco Costamagna Fri, 19 Jul 2019 11:14:38 +0200 linux-atm (1:2.5.1-3) unstable; urgency=medium * QA upload. * Drop obsolete Conflicts and Replaces. * Drop obsolete maintainer scripts. * Drop debian/compat and use debhelper-compat, bump to compat 12. * Move libraries to /usr/lib. * Use dh_installsystemd instead of dh_systemd_{enable,start}. Drop dh-systemd Build-Depends accordingly. * Drop obsolete start priorities from dh_installinit. -- Michael Biebl Thu, 18 Jul 2019 12:39:59 +0200 linux-atm (1:2.5.1-2) unstable; urgency=medium * QA upload. * Add Build-Depends: libfl-dev. (Closes: #846437) * Clean up maintainer scripts. -- Andreas Beckmann Sat, 10 Dec 2016 14:15:37 +0100 linux-atm (1:2.5.1-1.6) unstable; urgency=medium * Non-maintainer upload. * Add atm.service masking the atm init script (Closes: #796628) * Build-depend on dh-systemd and use dh_systemd_{enable,start} in debian/rules for the above. * Source LSB init function in atm init script - this it possible for systemd LSB hook to properly redirect direct invocations of the init script to systemctl. * Add an explicit Depends on lsb-base because of the above. * Drop build-dependency on initscripts package. (Closes: #828003) - the original intention was likely to have this as a dependency rather than build-dependency, but either way should no longer be needed so just drop it. * Orphan the package (Closes: #813775) - there has been no maintainer upload in over a decade and p2-mate confirmed he no longer has atm hardware and/or interest. -- Andreas Henriksson Sat, 25 Jun 2016 19:01:47 +0200 linux-atm (1:2.5.1-1.5) unstable; urgency=low * Non-maintainer upload. * Correct directory in libatm1-dev.postinst. Correct the directory checked for the directory symlink migration to be /usr/share/doc/libatm1-dev for the libatm1-dev binary package. It wrongly refered to /usr/share/doc/atm-tools. (Closes: #687857) -- Salvatore Bonaccorso Sat, 22 Sep 2012 11:03:25 +0200 linux-atm (1:2.5.1-1.4) unstable; urgency=low * Non-maintainer upload. * Make build targets executable in parallel (Closes: #674611). -- Luk Claes Tue, 03 Jul 2012 01:01:15 +0000 linux-atm (1:2.5.1-1.3) unstable; urgency=low * Non-maintainer upload. * Package converted to multiarch. * Support sendsigs.omit.d/ in /run and depend on initscripts >= 2.88dsf-13.3. (Closes: #633029) * Install the changelogs only in libatm1. * Removed the K links of the atmarpd initscript, there is no point in stopping the daemon. -- Marco d'Itri Sun, 30 Oct 2011 15:09:29 +0100 linux-atm (1:2.5.1-1.2) unstable; urgency=low * Non-maintainer upload. * Also Build-Depend on autoconf, automake, libtool. (Closes: #563306) * Prevent sendsigs from killing atmarpd. (Closes: #62144) -- Marco d'Itri Sat, 02 Jan 2010 21:59:19 +0100 linux-atm (1:2.5.1-1.1) unstable; urgency=low * Non-maintainer upload. * New upstream release. (Closes: #463401) * Removed the atm-dev dummy package. (Closes: #321826) * Fixed typos in some man pages. (Closes: #325072) * Autoreconf on build. (Closes: #535736, #549144) * Do not restart the init script on upgrades. (Closes: #303069) * Build with -fno-strict-aliasing just to be sure. * Added a .symbols file for libatm1. * Cleaned up debian/rules and updated to modern best practices. * Slightly cleaned up the init script. * Upgraded debhelper level to 5. * Merged back br2684ctl from the standalone source package. * Added an epoch to be able to replace the standalone br2684ctl package which has version 20040226-1. -- Marco d'Itri Thu, 24 Dec 2009 04:01:32 +0100 linux-atm (2.4.1-17.2) unstable; urgency=low * Non-maintainer upload to fix RC bug. * Add LSB dependency header to init.d scripts (Closes: #468459). -- Petter Reinholdtsen Mon, 31 Mar 2008 00:09:30 +0200 linux-atm (2.4.1-17.1) unstable; urgency=low * Non-maintainer upload. * Add patches/20_missing_includes.dpatch to add missing #include needed with last linux-libc-dev (Closes: #428943). -- Pierre Habouzit Thu, 19 Jul 2007 01:40:09 +0200 linux-atm (2.4.1-17) unstable; urgency=low * Fix build problem with gcc 4.0 (Closes: ) -- Peter De Schrijver (p2) Thu, 17 Mar 2005 23:02:03 +0100 linux-atm (2.4.1-16) unstable; urgency=low * Fix build problem with gcc 3.4 (Closes: #259422) -- Peter De Schrijver (p2) Thu, 15 Jul 2004 14:28:10 +0200 linux-atm (2.4.1-15) unstable; urgency=low * Updated descriptions (Closes: #239161) -- Peter De Schrijver (p2) Sun, 4 Apr 2004 21:10:20 +0200 linux-atm (2.4.1-14) unstable; urgency=low * Fix symlink for /usr/lib/libatm.so (Closes: #221011) -- Peter De Schrijver (p2) Sun, 7 Dec 2003 21:53:19 +0100 linux-atm (2.4.1-13) unstable; urgency=low * Previous version fixed #217259, but no changelog entry (Closes: #217259) * Previous version fixed #216662, but no changelog entry (Closes: #216662) * Added missing build dependency on automake1.4 (Closes: #221120, #221284) * New Maintainer (Closes: #206982) -- Peter De Schrijver (p2) Mon, 17 Nov 2003 23:03:58 +0100 linux-atm (2.4.1-12) unstable; urgency=low * don't build atm-tools-br2684 by default. Thanks to ftpmaster for not allowing the package to be in Debian. * Since we don't build atm-tools-br2684 any more, revert back to autotools output from 2.4.1-9 * Add README.br2684 documenting a way to build the package locally. -- Marc Haber Wed, 5 Nov 2003 21:31:42 +0000 linux-atm (2.4.1-11) experimental; urgency=low * Build-Depend on dpatch * dpatch br2684 header files from later libc for old libc (woody) -- Marc Haber Wed, 29 Oct 2003 19:05:07 +0000 linux-atm (2.4.1-10) experimental; urgency=low * add br2684 to package (closes: #216663) * autoreconf to actually build br2684 * have libatm1-dev provide libatm-dev (closes: #216662) * move lib symlink to libatm1-dev as well (closes: #217259) -- Marc Haber Thu, 23 Oct 2003 17:55:43 +0000 linux-atm (2.4.1-9) unstable; urgency=low * put libatm1-dev in libdevel (closes: #213170) * make sure that new descriptions actually make it into the package -- Marc Haber Thu, 9 Oct 2003 17:08:10 +0000 linux-atm (2.4.1-8) unstable; urgency=low * build arch-indep package as targets of binary-indep (closes: #212124) * use dh_installdocs to install files to libatm1-dev/docs * symlink shared lib to usr/bin (closes: #213146) * Use better long descriptions. Thanks to Javier (closes: #209427) Fernandez-Sanguino (closes: #209612) -- Marc Haber Sun, 28 Sep 2003 19:29:08 +0000 linux-atm (2.4.1-7) unstable; urgency=low * libatm1 now conflicts with atm-tools (<< 2.4.1-6) (closes: #208170) * armarp now writes output to stdout. * add atm-dev as empty transitional package to help upgrades -- Marc Haber Tue, 2 Sep 2003 09:20:33 +0000 linux-atm (2.4.1-6) unstable; urgency=low * split off shared libraries to libatm1 * rename atm-dev to libatm1-dev * Standards-Version: 3.6.1 -- Marc Haber Tue, 26 Aug 2003 15:46:27 +0000 linux-atm (2.4.1-5) unstable; urgency=low * move *.a and *.la to usr/lib (closes: #199506). * let atm-dev depend on atm-tools to avoid dangling /lib/libatm.so symlink. * Standards-Version: 3.5.6 -- Marc Haber Wed, 30 Jul 2003 11:46:19 +0000 linux-atm (2.4.1-4) unstable; urgency=low * add Build-Depends: on automake1.4 -- Marc Haber Wed, 11 Jun 2003 16:58:21 +0000 linux-atm (2.4.1-3) unstable; urgency=low * rebuilding libtool broke src/test/Makefile.in. Applied fix to Makefile.am and re-built again. -- Marc Haber Wed, 11 Jun 2003 11:05:26 +0000 linux-atm (2.4.1-2) unstable; urgency=low * rebuild configure script with new libtool (closes: #196909) -- Marc Haber Tue, 10 Jun 2003 21:01:50 +0000 linux-atm (2.4.1-1) unstable; urgency=low * new upstream source * remove atmarp and atmarpd from /usr/sbin as they are already in /sbin (closes: #196216) * lintian fixes -- Marc Haber Mon, 9 Jun 2003 16:03:45 +0000 linux-atm (2.4.0-5) unstable; urgency=low * Fix for src/test/Makefile.in to allow building on hppa and ia64 which the fix introduced to 2.4.0-4 broke. Thanks to Goswin Brederlow. * Move init.d priority to that atmarpd is started before network interfaces are started. * Move atmarpd and libatm to /sbin and /lib to allow atmarpd to be started before /usr is mounted. * use dh_install instead of dh_movefiles. -- Marc Haber Sat, 24 Aug 2002 15:13:48 +0000 linux-atm (2.4.0-4) unstable; urgency=low * new maintainer * Fix for src/test/Makefile.in to allow building on sparc. Thanks to Patrick Mauritz. (closes: #144225). * added pseudo-manpage for manpage-less binaries. * removed rpath by changing configure and make install paramaters -- Marc Haber Fri, 16 Aug 2002 20:39:05 +0000 linux-atm (2.4.0-3) unstable; urgency=HIGH * Re-ran libtoolize. Closes: #143522 * Previous version Closes: #135328 -- Russell Coker Fri, 19 Apr 2002 01:55:00 +0200 linux-atm (2.4.0-2) unstable; urgency=HIGH * Put a "grep -v EMAXERRNO" into the build process to deal with mipsel and the "#ifdef __KERNEL__" it has in it's /usr/include/asm/errno.h . -- Russell Coker Thu, 18 Apr 2002 19:56:00 +0200 linux-atm (2.4.0-1) unstable; urgency=HIGH * New upstream version which changes source package name. Closes: #138911 -- Russell Coker Mon, 18 Mar 2002 17:42:00 +0100 atm (0.79-4) unstable; urgency=low * Added build-depends on flex. Closes: #111072 * Made the atm tools use a shared object to save space. * Fixed the copyright file and put all copyright details in both packages. * Added support for easy building with different kernel headers. Closes: #110249 -- Russell Coker Sun, 7 Oct 2001 14:11:33 +0200 atm (0.79-3) unstable; urgency=low * Created /etc/init.d/atm to start and stop atmarpd. Closes: #110252 * Added build-depends on bison. Closes: #110576 -- Russell Coker Fri, 31 Aug 2001 15:21:44 +0200 atm (0.79-2) unstable; urgency=low * Changed the main package name to atm-tools to indicate that it doesn't provide ATM (gotta have the kernel support), it just has the daemons and utilities. -- Russell Coker Sat, 25 Aug 2001 17:55:00 +0200 atm (0.79-1) unstable; urgency=low * Initial Release. -- Russell Coker Fri, 24 Aug 2001 17:31:00 +0200