bladerf (0.2016.06-1~bpo8+1) unstable; urgency=medium * Rebuild for jessie-backports -- A. Maitland Bottoms Sun, 04 Sep 2016 10:26:55 -0400 bladerf (0.2016.06-1) unstable; urgency=medium * New upstream release * Depend upon ca-certificates. Thanks Andreas and piuparts! (Closes: #825690) -- A. Maitland Bottoms Sat, 09 Jul 2016 19:35:35 -0400 bladerf (0.2016.06) unstable; urgency=low * Added synchronization trigger functionality * Added SMB clock port control to libbladeRF API * Added XB-300 support * Added detection of v2.0.0 firmware series (with new VID/PID) * FPGA bitstream v0.6.0, FX3 FW v2.0.0, libbladeRF v1.7.2, bladeRF-cli v1.4.0 -- Jon Szymaniak Wed, 29 Jun 2016 16:10:35 -0400 bladerf (0.2016.01~rc1-5) unstable; urgency=medium * remove incorrect dependency. Thanks Andreas and Steven! (Closes:#815341) * Lintian fixes (copyright format, spelling) -- A. Maitland Bottoms Tue, 26 Apr 2016 20:05:18 -0400 bladerf (0.2016.01~rc1-4) unstable; urgency=medium * update to 2015.06-rc1.1-269-g5367663 -- A. Maitland Bottoms Mon, 25 Apr 2016 22:55:35 -0400 bladerf (0.2016.01~rc1-3~bpo8+1) jessie-backports; urgency=medium * Rebuild for jessie-backports. -- A. Maitland Bottoms Mon, 25 Jan 2016 12:41:42 -0500 bladerf (0.2016.01~rc1-3) unstable; urgency=medium * update to 1be8b76 use upstream fixes for big-endian builds * single Debian kFreeBSD support patch * spelling fixes -- A. Maitland Bottoms Tue, 12 Jan 2016 21:31:17 -0500 bladerf (0.2016.01~rc1-2) unstable; urgency=medium * Apply fixes for big-endian builds * Apply fixes for Debian kFreeBSD support -- A. Maitland Bottoms Mon, 11 Jan 2016 12:21:43 -0500 bladerf (0.2016.01~rc1-1) unstable; urgency=medium * New upstream release candidate update to 6e35ea3 -- A. Maitland Bottoms Sun, 10 Jan 2016 15:51:33 -0500 bladerf (2016.01-rc1) unstable; urgency=low * Added support for VCTCXO taming using 1.8V 1 PPS or 10 MHz input signal * Revised DC offset correction algorithm; fixes lockups * Added firmware logging mechanism * Updated firmware to FX3 SDK 1.3.3 * Added libbladeRF support for setting SMB clock to arbitrary frequency * Added XB-100 host support * Fixed TX undderrun issues (now correctly uses all available buffers) * FPGA bitstream v0.5.0, FX3 FW v1.9.0, libbladeRF v1.5.1, bladeRF-cli v1.3.1 -- Jon Szymaniak Thu, 07 Jan 2016 16:35:09 -0500 bladerf (0.2015.07-4) unstable; urgency=medium * Update to 2015.06-rc1.1-106-gc262e84 -- A. Maitland Bottoms Fri, 27 Nov 2015 22:16:54 -0500 bladerf (0.2015.07-3) unstable; urgency=low * fix-bladerf-big-endian (Closes: #795456) * Update to 6919e9e -- A. Maitland Bottoms Fri, 14 Aug 2015 10:23:34 -0400 bladerf (0.2015.07-2) unstable; urgency=medium * place optional installer packages in contrib (Closes: #795210) -- A. Maitland Bottoms Wed, 12 Aug 2015 00:53:59 -0400 bladerf (0.2015.07-1) unstable; urgency=low * New upstream release * Adopt upstream packaging, Thanks to Ryan Tucker - always install udev rules (no libbladerf-udev package necessary) - ship bladeRF-install-firmware script in bladerf package -- A. Maitland Bottoms Sat, 08 Aug 2015 21:21:45 -0400 bladerf (0.2015.06-rc1) unstable; urgency=low * New upstream release * Adopt upstream packaging, Thanks to Ryan Tucker always install udev rules (no libbladerf-udev package necessary) -- A. Maitland Bottoms Sat, 01 Aug 2015 00:12:45 -0400 bladerf (2015.07) unstable; urgency=low * FPGA: Fixed bug where TX_NOW bursts could cause metadata/sample FIFO slips * libbladeRF: Devices can now be opened using only a subset of a serial number * libbladeRF: Fixed regressions in XB-200 filterbank selection and loopback support * libbladeRF: Corrected zero-padding at end of TX burst * FPGA bitstream v0.3.4, FX3 Firmware v1.8.0, libbladeRF v1.4.3, bladeRF-cli v1.2.1 -- Jon Szymaniak Sat, 25 Jul 2015 16:35:38 -0400 bladerf (2015.06-rc1) unstable; urgency=low [ Jon Szymaniak ] * FPGA, libbladeRF: Configurable tuning modes: host and fpga * FPGA, libbladeRF: Scheduled retune: retune module at specified sample timestamp * FPGA, libbladeRF: Quick retune: retune using previously identified tuning parameters * FPGA, libbladeRF: Readback of current vctcxo trim DAC settting * bladeRF-cli: Added semicolon command separator support * bladeRF-cli: Added 'print trimdac' implementation [ Ryan Tucker ] * Fixup debian/changelog for rc1 -- Ryan Tucker Wed, 01 Jul 2015 20:07:04 -0400 bladerf (2015.02) unstable; urgency=low * Build fixes -- Jon Szymaniak Sat, 28 Feb 2015 15:58:39 -0500 bladerf (2015.01-rc2) unstable; urgency=low * Fixed issue #95, which prevented device from being opened after an application crash * Fixes for undesired XB-200 signal attenuation and LMS signal integrity issues * Added BLADERF_LOG_LEVEL support and optional libbladeRF syslog support * FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.2.0, bladeRF-cli v1.1.1 -- Jon Szymaniak Sat, 31 Jan 2015 17:02:35 -0500 bladerf (2014.12-rc1) unstable; urgency=low * Added libbladeRF API functions for finding and recovering devices in bootloader mode * Added BLADERF_SEARCH_DIR, current working directory, and binary dir to libbladeRF file search path * The bladeRF-cli -p/--probe option now returns a non-zero return code if no devices were found. * FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.1.0, bladeRF-cli v1.1.0 -- Jon Szymaniak Tue, 22 Dec 2014 14:06:49 -0500 bladerf (2014.11) unstable; urgency=low * First stable libbladeRF API release * FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.0.0, bladeRF-cli v1.0.0 -- Jon Szymaniak Sun, 30 Nov 2014 16:18:33 -0500 bladerf (2014.11-rc3) unstable; urgency=low * Second of three release candidates for rescheduled 2014.11 release * FPGA bitstream v0.1.1, FX3 Firmware v1.7.1, libbladeRF v0.17.0, bladeRF-cli v0.12.0 * Introduced timestamp metadata support in libbladeRF's synchronous interface * A majority of libbladeRF functions have been made thread-safe. * Fixes for DC calibration issues, deadlocks, crashes, and various defects. -- Jon Szymaniak Thu, 30 Oct 2014 21:59:38 -0400 bladerf (0.2014.09~rc2-5) unstable; urgency=low * remove kfreebsd uninstallable dependency on libusb-1.0-0 -- A. Maitland Bottoms Fri, 12 Sep 2014 09:40:21 -0400 bladerf (0.2014.09~rc2-4) unstable; urgency=low * update build dependency to libtecla-dev (due to libtecla 1.6.2) -- A. Maitland Bottoms Tue, 09 Sep 2014 14:49:14 -0400 bladerf (0.2014.09~rc2-3) unstable; urgency=low * update usb library dependencies -- A. Maitland Bottoms Tue, 09 Sep 2014 01:27:32 -0400 bladerf (0.2014.09~rc2-2) unstable; urgency=low * Update to 2014.09-rc2-49-g0bb0cce -- A. Maitland Bottoms Wed, 27 Aug 2014 02:37:36 -0400 bladerf (0.2014.09~rc2-1) unstable; urgency=low * Update to 2014.09-rc2-39g0189d48 bladeRF-install-firmware checksums updated * Second of three release candidates for 2014.09 release * FPGA bitstream v0.0.6, FX3 Firmware v1.7.1, libbladeRF v0.16.2, bladeRF-cli v0.11.1 * [hdl (nios)] Defects present in gain/phase correction bug * Frequency readback is incorrect when using xb200 bug * Markdown-ify the bladeRF-cli interactive help * bladeRF-cli: Clean up print/set lnagain bug * [libbladeRF] LMS VTUNE not locking occasionally bug * [bladeRF-Cli] Fix 'correct' command parameter ranges, cleanup usage and help text * [libbladeRF] Remove bladerf_* calls from lms.c enhancement * [libbladeRF] Cleanup: Move bladerf_get/set_sampling to lms.c enhancement * libbladeRF: LMS SELOUT[1:0] may be left in an invalid state upon exiting loopback mode * [CLI] After a calibrate command is issued, the bladeRF transmits a carrier -- A. Maitland Bottoms Wed, 20 Aug 2014 11:23:42 -0400 bladerf (2014.09-rc2) unstable; urgency=low * Tagged release 2014.09-rc2 at dddc72f * Second of three release candidates for 2014.09 release * FPGA bitstream v0.0.6, FX3 Firmware v1.7.1, libbladeRF v0.16.2, bladeRF-cli v0.11.1 * Closes #284: [hdl (nios)] Defects present in gain/phase correction bug * Closes #271: Frequency readback is incorrect when using xb200 bug * Closes #270: Markdown-ify the bladeRF-cli interactive help * Closes #254: bladeRF-cli: Clean up print/set lnagain bug * Closes #249: [libbladeRF] LMS VTUNE not locking occasionally bug * Closes #248: [bladeRF-Cli] Fix 'correct' command parameter ranges, cleanup usage and help text bug * Closes #243: [libbladeRF] Remove bladerf_* calls from lms.c enhancement * Closes #234: [libbladeRF] Cleanup: Move bladerf_get/set_sampling to lms.c enhancement * Closes #220: libbladeRF: LMS SELOUT[1:0] may be left in an invalid state upon exiting loopback mode bug * Closes #210: [CLI] After a calibrate command is issued, the bladeRF transmits a carrier. bug -- Ryan Tucker Thu, 24 Jul 2014 22:59:24 -0400 bladerf (0.2014.09~rc1-1) unstable; urgency=low * New upstream release candidate -- A. Maitland Bottoms Sun, 06 Jul 2014 23:06:53 -0400 bladerf (2014.09-rc1) unstable; urgency=low * Tagged release 2014.09-rc1 at 9c651b5 * First of two release candidates for 2014.09 release * FPGA bitstream v0.0.5, FX3 Firmware v1.7.0, libbladeRF v0.16.0, bladeRF-cli v0.11.0 * Closes #268: [libbladeRF] Version check routines have flipped logic bug * Closes #257: [libbladeRF] Remove incorrect error_conv() call(s). * Closes #256: [libbladeRF] Intermittent FPGA load failures bug * Closes #246: [libbladerRF] Added an error code for "File not found" errors enhancement * Closes #245: [libbladeRF] bladerf_set_bandwidth() does not appropriately handle actual=NULL bug * Closes #244: [libbladeRF] Lock-up occurs if sync TX is configured but not used * Closes #241: TX Stream can lose initial buffers * Closes #237: [libbladeRF] XB-200 support and API calls required bug * Closes #235: [libbladeRF] Change API return values for flash calls - return 0, not >= 0. bug * Closes #228: [libbladeRF] Additional libusb function checks required bug * Closes #223: FPGA DC remover block enhancement * Closes #217: Probe returns Backend Id's, bladerf_open wants a string for the backend. bug * Closes #211: [bladeRF-cli] Text wraps around in man pages bug * Closes #189: [libbladeRF] Refactor backend interface and libusb backend implementation enhancement * Closes #176: [libbladeRF] Mixup between SPI flash "sector" and "erase block" enhancement * Closes #55: CLI: A number of commands are still unimplemented stubs bug * Closes #46: CLI: Add -e support enhancement -- Ryan Tucker Sat, 05 Jul 2014 14:56:29 -0400 bladerf (0.10.7.47.ebe70c4-4) unstable; urgency=low * avoid help2man build failures on some architectures -- A. Maitland Bottoms Sat, 19 Apr 2014 19:07:28 -0400 bladerf (0.10.7.47.ebe70c4-3) unstable; urgency=low * More kFreeBSD build fixes -- A. Maitland Bottoms Fri, 18 Apr 2014 18:53:19 -0400 bladerf (0.10.7.47.ebe70c4-2) unstable; urgency=low * Find libusb2 library on kFreeBSD -- A. Maitland Bottoms Sun, 13 Apr 2014 17:10:54 -0400 bladerf (0.10.7.47.ebe70c4-1) unstable; urgency=low * Update to v0.10.7 47 ebe70c4 -- A. Maitland Bottoms Sun, 13 Apr 2014 11:35:00 -0400 bladerf (0.9.0.15.8ba2499-1~bpo70+1) wheezy-backports; urgency=low * Rebuild for wheezy-backports. -- A. Maitland Bottoms Tue, 21 Jan 2014 20:53:21 -0500 bladerf (0~20131229-1) unstable; urgency=low * Rename libbladerf0-dev -> libbladerf-dev -- Ryan Tucker Sun, 29 Dec 2013 16:04:17 -0500 bladerf (0.9.0.15.8ba2499-1) unstable; urgency=low * new upstream version -- A. Maitland Bottoms Fri, 27 Dec 2013 12:15:29 -0500 bladerf (0.8.0.14.9126eac-1) unstable; urgency=low * New Debian Package (Closes: #724967) -- A. Maitland Bottoms Mon, 25 Nov 2013 23:51:56 -0500 bladerf (0~20131006-1) unstable; urgency=low * Another experimental release * Make it work * Rebase to b80d31f5 (Merge pull request #140) * Generate man pages from markdown'd doxygen -- Ryan Tucker Sun, 06 Oct 2013 19:38:31 -0400 bladerf (0~20130929-1) unstable; urgency=low * Initial Debian packaging (Closes: #121) -- Ryan Tucker Sun, 29 Sep 2013 17:41:30 +0000