clamav (0.98.1+dfsg-1+deb6u3) oldstable; urgency=medium [ Sebastian Andrzej Siewior ] * Postinst scripts: fix empty access and broken freshclam.conf in clamav-base.postinst.in and clamav-freshclam.postinst.in (Closes: #741675) * Postinst scripts: fix quoting [ Andreas Cadhalpun ] * Add templates and adapt postinst and config scripts for the new options in 0.98 to fix the creation of the configuration files (Closes: #741675) * Reset new options to default to fix breakage in previous upload * Automatically updated translation files -- Scott Kitterman Wed, 19 Mar 2014 10:46:01 -0400 clamav (0.98.1+dfsg-1+deb6u2) oldstable; urgency=medium [ Andreas Cadhalpun ] * debian/clamav-base.postinst.in and debian/rules: Update to reflect the change from examples/clamd.conf to examples/clamd.conf.sample (Closes: #741512) [ Scott Kitterman ] * Add options in debian/clamav-base.postinst.in, clamav-daemon.postinst.in, clamav-freshclam.postinst.in, and clamav-milter.postinst.in for new 0.98 series options -- Scott Kitterman Sat, 15 Mar 2014 11:47:54 -0400 clamav (0.98.1+dfsg-1+deb6u1) oldstable; urgency=medium [ Adam Conrad ] * Stop using a cargo-culted syscall table and trust the glibc headers (Closes: #733035) [ Louis Bouchard ] * debian/common_functions - Fix slurp_config() that is sometimes not discriminative enough which leads to invalid configuration files (LP: #799623 ) [ Yolanda Robla ] * Add autopkgtests (Closes: #710260) [ Sebastian Andrzej Siewior ] * unit_test: check_clamav: skip .rar files if there is no rar support to fix test failure (and FTBFS) when tests are run * configure: use pkg-config for check so test is detected and tests will run [ Scott Kitterman ] * New upstream release (Closes: #727027) - Update embedded-library override for modified zlib for new SO version - Update debian/clamav-*.examples for upstream change in sample config file names * Stop removing clamav user and group on purge (Closes: #626547) * Moved split-tarball.sh from contrib to debian since it is debian specific and not provided by upstream * Update standards version to 3.9.5 without further change. * Add missing includes to shared/output.c and libclamav/clamav.h to fix FTBFS * Fix STATBUF definition to be struct stat vice struct64 to resolve FTBFS on 32 bit archs (Thanks to Andreas Cadhalpun) * Add pkg-config to build-depends -- Scott Kitterman Fri, 07 Mar 2014 18:21:57 -0500 clamav (0.97.8+dfsg-1) unstable; urgency=medium * New upstream release * Update libclamav6 lintian override to match updated soversion * Urgency medium due to security fixes -- Scott Kitterman Wed, 24 Apr 2013 22:34:16 -0400 clamav (0.97.7+dfsg-1) unstable; urgency=medium * New upstream release * Update libclamav6 lintian override to match updated soversion * Urgency medium due to security fixes -- Scott Kitterman Mon, 18 Mar 2013 22:28:02 -0400 clamav (0.97.6+dfsg-1) unstable; urgency=low * New upstream release (Closes: #689487) * Update libclamav6 lintian override to match updated soversion -- Scott Kitterman Mon, 08 Oct 2012 12:11:43 -0400 clamav (0.97.5+dfsg-6) unstable; urgency=medium * Urgency medium for RC bug fix the addressess regression from 0.97.3 * Add changes from upstream commit 6a879ad98460303b23a6fc119769a3b463a902f8 to fix unpack errors for various compressed files including some .bz2, .xls, .doc, and PDF (Closes: #684697) -- Scott Kitterman Tue, 14 Aug 2012 12:11:19 -0400 clamav (0.97.5+dfsg-5) unstable; urgency=low * Drop /var/run/clamav from the directories shipped in clamav-base (policy 9.1.4) and trust it will get cleaned up on boot - Thanks to Andreas Beckmann for the cluebat -- Scott Kitterman Thu, 19 Jul 2012 10:51:59 -0400 clamav (0.97.5+dfsg-4) unstable; urgency=low * Drop postrm snippets from clamav-base, clamav-freshclam, clamav-daemon, and clamav-milter that remove /var/log/clamav, /var/lib/clamav, /var/run/clamav, and /etc/clamav and and let dpkg remove the directories once they are empty in order to fix problems with directory removal by a package that did not own the directory (Closes: #681960) * Add /var/run/clamav to directories shipped by clamav-base so dpkg cleanup will work for it too. -- Scott Kitterman Wed, 18 Jul 2012 09:29:50 -0400 clamav (0.97.5+dfsg-3) unstable; urgency=low * Fix proxy port configuration handling in clamav-freshclam.postinst so that failure to specify port does not result in an invalid configuration (Closes: #678247), (LP: #784797) -- Scott Kitterman Sat, 30 Jun 2012 21:35:33 -0400 clamav (0.97.5+dfsg-2) unstable; urgency=medium * Medium urgency due to security fixes * Update debian/clamav-base.postinst.in to test for the existence of the actual .cvd files before trying to install them and not just the directory they should be in (Closes: #678019) * Remove /var/run/clamav on purge (LP: #829945) - Thanks to Imre Gergely for the patch * Add call to /sbin/restorecon in debian/common_functions make_directory to to label the /run directory for SE Linux (Closes: #677686) - Thanks to Russell Coker for the patch * Remove obsolete reference to clamav-data package in clamav-daemon init log failure message -- Scott Kitterman Mon, 18 Jun 2012 20:32:06 -0400 clamav (0.97.5+dfsg-1) unstable; urgency=medium [ Scott Kitterman ] * Urgency medium due to security fixes * New upstream release (Closes: #669370) - Addresses possible evasion cases in some archive formats (CVE-2012-1419, CVE-2012-1457, CVE-2012-1458, CVE-2012-1459) (Closes: #668273) - Repack tarball to remove non-free unrar code and win32 directory - Add contrib/split-tarball.sh and docs/man/clambc.1 in the diff.gz (these used to be added to the Debian specific upstream tarball, but aren't upstream so are better in the diff) - Change etc/clamav-milter.conf to Debian defaults * Enabled hardened build flags (Closes: #653958) - Thanks to Moritz Muehlenhoff for the patch * Remove var/lib/clamav/daily.cvd and main.cvd from clamav-base.examples because they aren't installed by the build system anymore (and are provided only as empty files in the upstream tarball) * Fix typos in README.Debian (Closes: #667831) * Update libclamav6 binary lintian override to match current filename * Bump standards version to 3.9.3 without further change [ Stephen Gran ] - Add a note about RAR functionality to README.Debian (Closes: #652009) -- Scott Kitterman Fri, 15 Jun 2012 11:39:26 -0400 clamav (0.97.3+dfsg-2.2) unstable; urgency=low * Non-maintainer upload. * Fix "FTBFS: llvm/lib/ExecutionEngine/JIT/Intercept.cpp:69:67: error: 'lseek64' was not declared in this scope": add missing include. Also fixed in upstream git already [bb8ab5c]. (Closes: #674330) -- gregor herrmann Fri, 01 Jun 2012 16:46:45 +0200 clamav (0.97.3+dfsg-2.1) unstable; urgency=low * Non-maintainer upload. * Fix spelling error in debconf templates. Closes: #660966 * Fix pending l10n issues. Debconf translations: - Dutch; (Jeroen Schot). Closes: #651405 - German (Thomas Müller). Closes: #653409 - Polish (Michał Kułach). Closes: #659369 - Japanese (Kenshi Muto). Closes: #659980 - Czech (Miroslav Kure). Closes: #660319 - Italian (Luca Monducci). Closes: #660475 -- Christian Perrier Thu, 23 Feb 2012 09:46:53 +0100 clamav (0.97.3+dfsg-2) unstable; urgency=low [ Loïc Minier ] * Pass --without-included-ltdl to configure instead of hardcoding --with-ltdl-include= and --with-ltdl-lib= pathnames, the pathnames wouldn't work with multiarch anymore. * rules: let clamav-dbg depend on libclamav6 as it seems to require it and this could make rules -j safe (didn't manage to reproduce the -j2 failure I was getting with the change). [ Stephen Gran ] * Add VERBOSE=1 to make check [ Scott Kitterman ] * Add myself to uploaders -- Scott Kitterman Tue, 06 Dec 2011 16:44:16 -0500 clamav (0.97.3+dfsg-1) unstable; urgency=medium [ Michael Tautschnig ] * New upstream release: Fixes potential DoS -- Michael Tautschnig Sun, 23 Oct 2011 23:20:17 +0100 clamav (0.97.2+dfsg-1) unstable; urgency=low [ Michael Tautschnig ] * New upstream release - Fixes off-by-one-error (closes: #635599) - Fixes opcode 20 is not implemented error (closes: #635340) - New option ExtraDatabase for freshclam * Debconf translation updates - Portuguese (closes: #630954) - French (closes: #631978) - Swedish (closes: #632144) - Danish (closes: #632558) - Spanish (closes: #633883) - Russian (closes: #635145) -- Michael Tautschnig Fri, 29 Jul 2011 16:13:32 +0200 clamav (0.97.1+dfsg-1) unstable; urgency=low [ Michael Tautschnig ] * New upstream release - New option ClamukoExcludeUID for clamd * Added debconf question for clamav-milter/LogClean (closes: #617890). * Clarified text about clamav-milter's temporary directory in debconf question (closes: #617889). * Debconf translation updates - Japanese (closes: #624802) * Remove references to other libraries from dependency_libs field (closes: #621206). Thanks Luk Claes for the patch. * Added doc-base file to clamav-docs (closes: #629357). Thanks John Vogel. * Bumped Standards-Version to 3.9.2, no changes needed. [ Stephen Gran ] * Update README.Debian to reflect reality for the milter (closes: #597048) -- Michael Tautschnig Fri, 10 Jun 2011 16:09:55 +0200 clamav (0.97+dfsg-2) unstable; urgency=low [ Michael Tautschnig ] * Proper suite name. * More tidy up: new upstream release also fixed problems with ExtendedDetectionInfo (upstream bb#2409, closes: #617262). -- Michael Tautschnig Thu, 10 Mar 2011 22:50:28 +0000 clamav (0.97+dfsg-1) UNRELEASED; urgency=low [ Alberto Wu ] * New upstream release [ Stephen Gran ] * General tidy up -- Stephen Gran Fri, 18 Feb 2011 20:52:08 +0000 clamav (0.96.5+dfsg-2) UNRELEASED; urgency=low [ Stephen Gran ] * Remove ucf backup files in cron.d directory (closes: #607053). [ Michael Tautschnig ] * Acknowledge NMU - thanks Christian for fixing my earlier broken upload (probably 0.96.3+dfsg-1) (closes: #610058). * Debconf translation updates - Danish (closes: #605626) - Dutch (closes: #605903) * Cherry-pick bc0ef08bb7312b5f295cd4070d44be96d4aed9d2 to fix crashes in paranoid mode (closes: #606308). * Cherry-pick ee50848a509662aa21c6c6a41b72c4053b1eedf3 to improve scanning of mbox files (closes: #589767). -- Michael Tautschnig Tue, 18 Jan 2011 23:21:34 +0000 clamav (0.96.5+dfsg-1.1) unstable; urgency=low * Non-maintainer upload. * Fix encoding of Italian debconf translation. -- Christian Perrier Wed, 12 Jan 2011 19:51:36 +0100 clamav (0.96.5+dfsg-1) unstable; urgency=low [ Alberto WU ] * New upstream release - Fix JIT-related crashes on VIA (closes: #604621). - New option DatabaseCustomURL for freshclam - New option OLE2BlockMacros for clamd [ Michael Tautschnig ] * Forcibly remove files in purge even if ucf is not available (anymore) - thanks piuparts. * Change StreamMaxLength default to 25Mb, also update user configurations still using 0 as value (closes: #602840). -- Michael Tautschnig Wed, 01 Dec 2010 16:46:37 +0100 clamav (0.96.4+dfsg-1) unstable; urgency=low [ Alberto WU ] * New upstream release - Fix 'Unknown error code ERROR' (closes: #599372). - Disable the JIT on K6-2 (closes: #600088). - Fix parsing of malformed pdf files (closes: #599908). [ Michael Tautschnig ] * Debconf translation updates - Czech (closes: #600098) - Vietnamese (closes: #601538) * Add additional check for milter socket in status command of milter init script (thanks Chris Moules for proposing a patch, closes: #600908). -- Michael Tautschnig Fri, 29 Oct 2010 12:38:52 +0200 clamav (0.96.3+dfsg-2) unstable; urgency=low [ Stephen Gran ] * Add NotifyClamd only if set to nonempty value. [ Michael Tautschnig ] * Cherry-pick from upstream: Only enable RLIMIT_DATA warning on *BSD (already included in Ubuntu's 1ubuntu3) (closes: #598083). * Do rmdir /etc/clamav, /var/log/clamav, /var/lib/clamav in all postrms as we cannot count on clamav-base's postrm to be the last one being called (thanks piuparts). * Remove trailing / in freshclam's DatabaseDirectory default value (closes: #598084). -- Michael Tautschnig Sun, 26 Sep 2010 11:18:22 +0200 clamav (0.96.3+dfsg-1) unstable; urgency=high [ Stephen Gran ] * Fixed NotifyClamd config options handling. [ Alberto WU ] * New upstream release - urgency=high as this addresses CVE-2010-0405 - Reset MaxFileSize to default value if set to 0 (closes: #585479) - New config option ExtendedDetectionInfo (clamd.conf) [ Michael Tautschnig ] * Set data segment limit in tests to 524288 to make kfreebsd-i386 systems happy (closes: #591245). * Bumped Standards-Version to 3.9.1, no changes needed. * Preserve order of database mirrors (closes: #592322). * Added Vcs-Git and Vcs-Browser control fields. * Debconf translation updates - Italian (closes: #597307) * We'll stay with 1.0 Debian source format for now, added proper debian/source/format -- Michael Tautschnig Mon, 20 Sep 2010 20:04:33 +0200 clamav (0.96.1+dfsg-3) unstable; urgency=low [ Michael Tautschnig ] * Increase memory limit for tests (closes: #590271). -- Michael Tautschnig Sun, 25 Jul 2010 22:47:46 +0200 clamav (0.96.1+dfsg-2) unstable; urgency=low [ Michael Tautschnig ] * Really ship clamav-milter.conf man page (closes: #585160) * Really fix PowerPC issue (closes: #587738, #579960) * Debconf translation updates - German (closes: #585482) - Russian (closes: #585691) - French (closes: #585894) * Copied BSD license text from concerned files into debian/copyright, as suggested by lintian. * Bumped Standards-Version to 3.9.0, no changes needed. -- Michael Tautschnig Sun, 25 Jul 2010 08:50:01 +0200 clamav (0.96.1+dfsg-1) unstable; urgency=medium [ Stephen Gran ] * Only manipulate /etc/aliases on fresh install (closes: #580020) * Handle RejectMsg with special care when upgrading (closes: #581410) * 0 is a valid value for StreamMaxLength, handle it properly (closes: #581408) [ Alberto WU ] * New upstream release - Includes PowerPC workaround (closes: #579960) - Ships clamav-milter.conf man page (closes: #565208) - Fixes CVE-2010-1639, CVE-2010-1640 (closes: #584183) [ Scott Kitterman ] * Add support for new TestDatabases option in debian/clamav-freshclam.postinst.in (match upstream default of yes) * Add VirusAction option to debian/clamav-milter.postinst.in [ Michael Tautschnig ] * Debconf translation updates - French (closes: #579827) - Swedish (closes: #580143) - Spanish (closes: #581735) -- Michael Tautschnig Thu, 03 Jun 2010 13:20:50 +0200 clamav (0.96+dfsg-4) unstable; urgency=low [ Stephen Gran ] * Fixed typo in clamav-milter's postinst [ Michael Tautschnig ] * Fixed typo in clamav-freshclam's postinst (closes: #579271) * Debconf translation updates - Portuguese (closes: #579068) -- Stephen Gran Mon, 26 Apr 2010 21:41:18 +0200 clamav (0.96+dfsg-2) unstable; urgency=low [ Scott Kitterman ] * In debian/clamav-base.postinst.in and debian/clamav-freshclam.postinst.in, adjust debconf processing for new options to produce valid configuration files (closes: #577499, #577952) [ Stephen Gran ] * Note that this series (closes: #577462) * Update ScanMail template and make freshclam LogTime default to true to bring it into alignment with others (closes: #521661, #521657) Other questions were deemed outside of scope of debconf for now. * Added debconf handling of new config options (closes: #577611, #577920) * Update debian/copyright (thanks Török Edwin ) (closes: #578306) [ Michael Tautschnig ] * Create and maintain freshclam's logrotate file (closes: #577041) * Set milter's LogFile debconf option to a non-blank value; LogFile was implicitly enabled by default anyway through postinst logic; make LogTime default to sync with clamav-daemon (closes: #534748) * Copy files from /usr/share/doc/clamav-base/examples/ only if this dir exists (closes: #550641) * Increase virtual memory ulimit for unit tests to 600000 to make unit tests work on kfreebsd-amd64 as well (closes: #578451) * Changed debconf template for freshclam/interface question to make clear that multiple interfaces are ok (closes: #545969) -- Stephen Gran Tue, 20 Apr 2010 08:22:36 +0200 clamav (0.96+dfsg-1) unstable; urgency=low [ Scott Kitterman ] * Bump libclamav SO version to 6.1.0 in libclamav6.install and Update SO version for lintian override for libclamav6 * Add a check in debian/clamav-daemon.init.in to see if signatures are present before starting and exit with a useful log message if not * Remove deprecated MailFollowURLs option from default clamd.conf in clamav-base.postinst.in * Additional debian/copyright updates for OpenBSD regex in llvm * Update clamav-milter.logcheck.ignore.server (closes: #541008) - Thanks to Martin Krafft for the patch * Correct options in clamav-milter.init.in (closes: #576955) - Thanks to Marco d'Itri for the patch [ Alberto WU ] * New upstream release (closes: #576908) * Update debian/clamav-base.templates and clamav-base.postinst.in for new options: - OfficialDatabaseOnly, LocalSocketGroup, LocalSocketMode, CrossFilesystems, ClamukoScannerCount, and BytecodeSecurity * Update debian/clamav-freshclam.postinst.in for new options: - DetectionStatsHostID and Bytecode * Update debian/clamav-milter.templates and clamav-milter.postinst.in for new options: - MilterSocketGroup, MilterSocketMode, and ReportHostname * Update debian/rules to provide appropriate CXXFLAGS because clamav now includes C++ code * Update debian/clamav-testfiles.install to provide all test files * Remove the new bytcode.cvd file along with the other signature files when clamav-base or clamav-freshclam are purged * Drop libclamav.a from libclamav-dev.install (not built by upstream) * Add new Bytecode Testing Tool, usr/bin/clambc, to clamav.install * Add build-depends on python for llvm * Drop build-depends on libwrap0-dev (no longer needed) * Update debian/copyright for the embedded copy of llvm (using the system llvm is not currently feasible) [ Stephen Gran ] * Prep for release -- Stephen Gran Sun, 11 Apr 2010 22:29:10 +0100 clamav (0.95.3+dfsg-1) unstable; urgency=low [ Michael Tautschnig ] * New upstream version * Should fix clamd segfault on startup (closes: #537629) * Updated info in clamd.conf man page (closes: #534443) * Proper socket ownership setup, no chgrp in make_dir (closes: #553333) -- Michael Tautschnig Mon, 02 Nov 2009 10:24:35 +0100 clamav (0.95.2+dfsg-5) unstable; urgency=low [ Michael Meskes ] * Debconf translation updates - Czech (closes: #535672) - Italian (closes: #537471) - Dutch (closes: #545061) - German (closes: #545753) - Vietnamese (closes: #548050) * Fixed LSB header information. (Closes: #546450) - thanks to Petter Reinholdtsen * Bumped Standards-Version to 3.8.3, no changes needed. [ Stephen Gran ] * Remove clamav-milter logrotate file on purge (closes: #536669) * Always use clamav-milter.ctl as local socket (closes: #543309) [ Michael Tautschnig ] * Remove all remaining files during purge -- Michael Meskes Sat, 31 Oct 2009 17:50:46 +0100 clamav (0.95.2+dfsg-4) unstable; urgency=low * Fix the changelog -- Stephen Gran Sun, 12 Jul 2009 11:02:12 +0100 clamav (0.95.2+dfsg-3) unstable; urgency=low [ Michael Meskes ] * Debconf translation updates - Finnish (closes: #534339) [ Stephen Gran ] * Lots more milter maintainer script cleanups -- Stephen Gran Sat, 11 Jul 2009 16:23:35 +0100 clamav (0.95.2+dfsg-2) unstable; urgency=low * Don't abort dpkg on failed start (closes: #533397) * Get rid of spurious patch downgrading version (closes: #533638) * [Debconf translation updates] - French (closes: #533667) - Portuguese (closes: #533779) - Russian (closes: #533548) - Swedish (closes: #533568) -- Stephen Gran Sat, 20 Jun 2009 14:51:35 +0100 clamav (0.95.2+dfsg-1) unstable; urgency=low * New upstream version * Should fix crash on unofficial sigs (closes: #525483) * Get rid of ridiculous home rolled suid (closes: #522106) * Freshclam gets 0400 or 0444 config file (closes: #524356) * Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #523573 * [Debconf translation updates] - Swedish. Closes: #525044 - Japanese. Closes: #525084 - French. Closes: #526024 - Portuguese. Closes: #526644 - Russian. Closes: #526727 - German. Closes: #526730 - Dutch. Closes: #526745 - Galician. Closes: #527320 * Define status_of_proc in the event that it's not in lsb/init-functions (closes: #527903) * Stop referencing /etc/default/clamav-milter and drop command line arguments in milter init script (closes: #526123) -- Stephen Gran Fri, 12 Jun 2009 21:42:59 +0100 clamav (0.95.1+dfsg-3) unstable; urgency=low [ Michael Tautschnig ] * Unignored make check results on ia64, sparc (alpha still broken): tell electric-fence that the alignment is at least 8 bytes (thanks Aurelien Jarno). [ Stephen Gran ] * Fix wrong variable useage in milter init script [ Michael Meskes ] * Applied patch assembled by Christian Perrier : - Debconf templates and debian/control reviewed by the debian-l10n- english team as part of the Smith review project. Closes: #523573 - [Debconf translation updates] - Swedish. Closes: #525044 - Japanese. Closes: #525084 - French. Closes: #526024 - Portuguese. Closes: #526644 - Russian. Closes: #526727 - German. Closes: #526730 - Dutch. Closes: #526745 - Galician. Closes: #527320 - Basque. Closes: #530854 * Made pid files word readable. There doesn't seem to be any sense in not doing this given that the information is available for everyone anyway. Closes: #527901 -- Michael Meskes Thu, 28 May 2009 14:10:22 +0200 clamav (0.95.1+dfsg-2) unstable; urgency=low [ Michael Tautschnig ] * Fixed LogFile handling in clamav-milter.postinst (logrotation was broken) [ Stephen Gran ] * More work on clamav-milter's init script -- Stephen Gran Mon, 20 Apr 2009 08:17:29 +0200 clamav (0.95.1+dfsg-1) unstable; urgency=low [ Michael Tautschnig ] * New upstream version, fixes: - clamav-milter: Add option to skip scanning of authenticated smtp users (closes: #519505) * Really ignore failing test suite on alpha, ia64, sparc. * Build-Depends libltdl3-dev updated to new libltdl-dev. * Translation update: - sv (thanks Martin Bagge ) * Don't suggest unrar, lha anymore as external unpackers aren't supported anyway since 0.94. [ Stephen Gran ] * Readd special handling for postfix (closes: #523119) * clamav-daemon: ArchiveLimitMemoryUsage is deprecated (closes: #522910) * Allow user to select db.ipv6.clamav.net (closes: #513023) * clamav-docs: unneeded dependency on sharutils (closes: #523878) * Make libclamav suggest libclamunrar -- Stephen Gran Tue, 14 Apr 2009 19:22:48 +0100 clamav (0.95+dfsg-2) unstable; urgency=low [ Michael Tautschnig ] * Improved debconf questions * Added Homepage: control field * Another watch file fix to rank upstreams rc lower than releases. * Even more /var/run-on-tmpfs fixes (closes: #521606). * Ignore failing test suite on alpha, ia64, sparc (bugs filed against glibc). [ Stephen Gran ] * Lots of option handling fixups for clamav-milter (closes: #521668). * Remove new .cld files on removal of freshclam * Eliminate unnecessary ucf version check * Try to preseed clamav-milter.conf with options from clamd.conf where possible * package new clamdtop utility (closes: #521658) -- Stephen Gran Wed, 01 Apr 2009 23:41:27 +0100 clamav (0.95+dfsg-1) unstable; urgency=low [ Michael Tautschnig ] * New upstream version, fixes: - License incompatibility with libgmp (closes: #512776) - wrong claim about all interception message methods (closes: #438455) - clamdscan fails to connect to clamd (closes: #515798) - clamav-milter dies after email scanning (sparc64) (closes: #339590) - VERSION reports wrong database version (closes: #323803) - memory footprint skyrockets (closes: #420391) - Virus not detected in RAR-archive inside email (closes: #484642) - clamav-milter ignores whitelist file (closes: #520353) - clamav-milter won't start when both local and tcp socket are in use (closes: #505852) - ERROR: Can't find any clamd server (closes: #435007) - clamd: random SIGABRT (closes: #512720) * Removed configure options that aren't supported anymore (--with-sendmail, --with-tcpwrappers, --with-dns) * Bumped Standards-Version to 3.8.1 (added mkdir calls to ensure /var/run/clamav exists) * Configure with --with-system-tommath to use Debian's libtommath-dev instead of the bundled one. * Updated *Depends (dropped essential packages and removed versions where etch already satisfies the dependencies). * SONAME bump: libclamav5 -> libclamav6 * Build-Depend on libltdl3-dev to avoid using the bundled libltdl, but still get support for runtime loading (nonfree) unrar code if the user so decides. * Fixed watch file to deal with new versioning schema (+dfsg). * Run make check unless nocheck is in DEB_BUILD_OPTIONS * Changed Section of clamav-dbg to debug. * Override lintian error stating that libclamav6 statically links to zlib (lintian is right, libclamav6 does indeed duplicate parts of the zlib code, but there is not way around that). * Handle new option SafeBrowsing in freshclam.conf. * Create symlinks to AUTHORS, not AUTHORS.gz (closes: #520172). * clamav-milter got its own config file and logging options, handled via debconf, added logrotation (closes: #518628) -- Michael Tautschnig Wed, 25 Mar 2009 16:02:18 +0100 clamav (0.94.dfsg.2-1) unstable; urgency=low [ Stephen Gran ] * New upstream version [ Michael Meskes ] * Removed unused debconf templates and unfuzzied all translations. [ Michael Tautschnig ] * Removed --unzip from clampipe script (closes: #506055) * Moved clamav-milter specific stuff from its specific README.Debian to clamav-global one. * Sync start of clamav-milter with clamav-daemon when clamav-daemon is being upgraded (closes: #309067) * The TemporaryDirectory option has been added long ago, no need for hacks via clamav-daemon.default anymore (closes: #253080) -- Michael Meskes Sat, 29 Nov 2008 12:15:34 -0800 clamav (0.94.dfsg.1-1) unstable; urgency=low [ Stephen Gran ] * New upstream version (closes: #505134, #502165, #501298) * Handle new option SubmitDetectionStats in freshclam.conf * Remove RAR from the description, since we really don't handle it anymore * Skip 'sleep until -e socket' logic if socket is of type inet (LP #296086) [ Michael Meskes ] * Added myself as uploader. * Changed watch file to account for dfsg extension. * Do not configure temporary directory in clamd.conf anymore unless it is already configured there. * Added Basque debconf translation (closes: #500007) [ Michael Tautschnig ] * Use lsb's status_of_proc function to determine the status of the process and return with according exit codes (closes: #486076) * Updated Dutch debconf translation (thanks Paul Gevers ) (closes: #501627) * Changed versioned dependency of clamav-daemon to clamav-base to equals (closes: #500416) * Handle new option DetectionStatsCountry in freshclam.conf * Don't trust the multilib guessing stuff, always use libdir=$prefix/lib * Removed nowadays unused lintian overrides * Create md5sums control file for clamav-dbg as well (thanks, lintian) -- Michael Tautschnig Wed, 12 Nov 2008 01:57:58 +0100 clamav (0.94.dfsg-1) unstable; urgency=low * New upstream version (closes: #497662, #497773) - lots of new options for clamd.conf - fixes CVEs CVE-2008-3912, CVE-2008-3913, CVE-2008-3914, and CVE-2008-1389 * No longer supports --unzip option, so typo is gone (closes: #496276) * Translations: - sv (thanks Martin Bagge ) (closes: #491760) -- Stephen Gran Fri, 05 Sep 2008 17:25:34 +0100 clamav (0.93.3.dfsg-1) unstable; urgency=low * New upstream version (closes: #489890, #492838, #491720) * Fix AUTHORS symlink (closes: #490207) * Fix freshclam's logcheck regex (closes: #486385) -- Stephen Gran Sun, 03 Aug 2008 20:20:40 +0100 clamav (0.93.1.dfsg-1.1) unstable; urgency=high * Non-maintainer upload by the Security Team. * This update addresses the following security issue: - CVE-2008-2713: A crafted petite file can trigger an out-of-bound read operation in petite.c resulting in a denial of sevice (Closes: #490925). -- Stephen Gran Tue, 10 Jun 2008 20:43:32 +0100 clamav (0.93.1.dfsg-1) unstable; urgency=low * New upstream version * Move conflicts to freshclam -- Stephen Gran Tue, 10 Jun 2008 20:43:32 +0100 clamav (0.93~dfsg-4) unstable; urgency=low * Dammit. The -f flag is there for a reason (closes: #484262) -- Stephen Gran Tue, 03 Jun 2008 14:35:29 +0100 clamav (0.93~dfsg-3) unstable; urgency=low * Make dash happy with use of return (closes: #484170) -- Stephen Gran Mon, 02 Jun 2008 22:45:21 +0100 clamav (0.93~dfsg-2) unstable; urgency=low * Remove dpatch dependency - we keep the code in a patch system. * Wrap evaluations of [ $variable = true ] in calls to to_lower() * Add is_true function to catch the 7 bajillion variants of something being true (closes: #483874) * Clean up old incompatible database formats. Users of 3rd party software that also loads those old databases are now out of luck. (closes: #481864) * Fix logcheck lines for clamav-daemon (closes: #477818) * New translation: - sv (thanks Martin Bagge )(closes: #483765) -- Stephen Gran Sun, 01 Jun 2008 16:25:50 +0100 clamav (0.93~dfsg-1) unstable; urgency=low * New upstream release (closes: #476450, #477278) - Fixes failure to lock database directory (closes: #467298, #471643, #426503) * Fix logrotation when supervised (closes: #469196) * Run adduser on every new install - this should work around the xen-create-image thing of adding users but not groups (closes: #458015) * Make clamav-milter be a little more self-documenting (closes: #477178) -- Stephen Gran Mon, 28 Apr 2008 23:57:28 +0100 clamav (0.92.1~dfsg2-1.1) unstable; urgency=high * Non-maintainer upload by the Security Team. * This update addresses the following security issue: - CVE-2008-1833: heap-based buffer overflow allows remote attackers to execute arbitrary code via a crafted WWPack compressed PE binary (Closes: #476694). -- Nico Golde Sat, 19 Apr 2008 12:42:18 +0200 clamav (0.92.1~dfsg2-1) unstable; urgency=high * libclamav/pe.c: possible integer overflow in wwpack * [CVE-2008-1100]: libclamav/pe.c: possible integer overflow in upack * [CVE-2008-1387]: libclamav/spin.c: possible integer overflow * libclamav/unarj.c: DoS in unarj -- Stephen Gran Tue, 15 Apr 2008 17:48:43 +0100 clamav (0.92.1~dfsg2-0.1) unstable; urgency=low * Non-maintainer upload. * Remove non-free unrar files and repack orig.tar.gz (Closes: #470073) -- Scott Kitterman Sat, 08 Mar 2008 19:29:19 -0500 clamav (0.92.1~dfsg-1) unstable; urgency=low * New upstream bugfix release - [2007-6595]: libclamav/others.c: symlink vulnerability cli_gentempfd now calls open with O_EXCL (closes: #458532) - [CVE-2008-0318]: libclamav/pe.c: possible integer overflow - libclamav/mew.c: possible heap corruption * Add a note to NEWS.Debian about unrar support being dropped (closes: #465203) * clamav-milter: off-by-one programming error in pingServer (closes: #458204) * Copyright now complete (thanks Scott Kitterman ) (closes: #456770) * Attempt to work around clamav-milter not bothering to check if another instance is running on startup (reported as LP bug 179169) -- Stephen Gran Tue, 12 Feb 2008 02:25:20 +0000 clamav (0.92~dfsg-3) unstable; urgency=low * Copyright clarifications (closes: #456770) (thanks Scott Kitterman ) -- Stephen Gran Thu, 20 Dec 2007 15:28:12 +0000 clamav (0.92~dfsg-2) unstable; urgency=low * Drop obsolete option NodalCoreAcceleration (closes: #457051) -- Stephen Gran Wed, 19 Dec 2007 11:45:28 +0000 clamav (0.92~dfsg-1) unstable; urgency=medium * New upstream version - urgency medium due to 3 CVEs: * [CVE-2007-6336]: libclamav/mspack.c: Off-by-1 error in LZX_READ_HUFFSYM * [CVE-2007-6337]: libclamav/nsis/bzlib_private.h: bzlib issue * [CVE-2007-6335]: libclamav/pe.c: MEW PE File Integer Overflow - would be urgency=high, except we have soname transition - new package libclamav3 thanks to that - Memory optimizations in trie building (closes: #420391) - Don't create circular lists when two version of the same database are loaded (closes: #454052) - sigtool prints name of file being processed (closes: #414246) - now displays message number during mbox scans with debug enabled (closes: #452543) - clamav-milter now accepts HUP to reopen logfile (closes: #414993) * Packaging changes: * Check that directories shipped in the .deb exist before chowning them. This is apparently an unreported problem for some Ubuntu users * Patches: - remove 25_wrong_shebang.dpatch (merged upstream) - add 25_skip_sendmail.cf.dpatch (closes: #312575) * Translations: - fr (closes: #454128)(thanks Christian Perrier ) * Handle new option LogTime for freshclam * Move clamav-docs to section 'doc' * Catch all cases where the init script is called from freshclam's postinst and make sure invoke-rc.d is used if available * Freshen patches -- Stephen Gran Mon, 17 Dec 2007 16:58:40 +0000 clamav (0.91.2-4) unstable; urgency=low * i18n rework (closes: #444801) * New translations: - cs (closes: #446786)(thanks Miroslav Kure ) - de (closes: #447489)(thanks Helge Kreutzmann ) - es (closes: #445605)(thanks Javier Fernández-Sanguino Peña ) - fi (closes: #447000)(thanks Esko Arajärvi ) - gl (closes: #446473)(thanks Jacobo Tarrio ) - it (closes: #445348)(thanks Cristian Rigamonti ) - ja (closes: #446208)(thanks Kenshi Muto ) - pt (closes: #447291)(thanks Ricardo Silva ) - pt_BR (closes: #446940)(thanks Felipe Augusto van de Wiel (faw) ) - ru (closes: #447356)(thanks Yuri Kozlov ) - vi (closes: #446898)(thanks Clytie Siddall ) * Get rid of some unused debconf notes * Update NEWS.Debian retroactively to quiet lintian * Add Build-Dep on po-debconf and call debconf-updatepo in clean target * Better watch file (closes: #449622) (thanks Raphael Geissert ) * Better integration between postfix and clamav-milter (closes: #446404) -- Stephen Gran Sat, 01 Dec 2007 13:01:49 +0000 clamav (0.91.2-3) unstable; urgency=low * Remove spurious dependency on libcurl3-dev from libclamav-dev (closes: #440771) -- Stephen Gran Tue, 04 Sep 2007 12:29:13 +0100 clamav (0.91.2-2) unstable; urgency=low * Use the correct variable for $user (closes: #439253) * Guard against unset $DatabaseDirectory (closes: #439913) * Make it easier to use clamav-milter with postfix (closes: #434995) * Fix shebang paths in contrib directories (closes: #439352) * Quiet clamav-milter startup (closes: #438454) -- Stephen Gran Fri, 31 Aug 2007 12:29:09 +0100 clamav (0.91.2-1) unstable; urgency=low * New upstream version - fix call to tolower() which led to a crash in libclamav - fix possible NULL dereference, e.g. when parsing email with RFC2397 URI - fix floating point exception when using ScanOLE2 - fix possible NULL dereference in rtf.c -- Stephen Gran Tue, 21 Aug 2007 11:17:01 +0100 clamav (0.91.1-2) unstable; urgency=low * Move database files to -base package (closes: #434505) * Use right config option to determine freshclam's uid (closes: #436204) * Freshclam ignore.d.server update for cdiff downloads (closes: #435199) -- Stephen Gran Sat, 11 Aug 2007 12:53:03 +0100 clamav (0.91.1-1) unstable; urgency=low * New upstream version * Patches: - drop 25_phishcheck-crash.dpatch (upstream) -- Stephen Gran Mon, 16 Jul 2007 23:47:27 +0100 clamav (0.91-2) unstable; urgency=low * Pull 25_phishcheck-crash.dpatch from upstream svn to fix a possible crash in phishcheck.c * Handle new Phish* options (no longer experimental code) -- Stephen Gran Sun, 15 Jul 2007 17:24:55 +0100 clamav (0.91-1) unstable; urgency=low * New upstream version (closes: #432857) * Fixes long database load time (closes: #423879, #427154, #428675, #432334) * [CVE-2007-3725] DoS in unrarvm.c - This should make this urgency=high, but I am nervous about some changes in clamav.h. After discussion with the Release Wizard, I am not going to bump the soname unilaterally, but I am going to delay the migration to testing to catch any problems. * Patch rework: - freshen 02_milter_sendmail_version_patch - freshen 03_etc_files_patch - 20_clamscan-manpage-update.dpatch obsoleted - freshen 24_nullmailer_ftbfs.dpatch -- Stephen Gran Sun, 15 Jul 2007 16:48:06 +0100 clamav (0.90.3-2) unstable; urgency=low * Fix newaliases test to not fail when newaliases isn't present (closes: #431990) * Quiet freshclam warnings when run from cron (closes: #427420) -- Stephen Gran Sat, 07 Jul 2007 09:21:20 +0100 clamav (0.90.3-1) unstable; urgency=low * New upstream version - Fixes segfault in segfault handler (closes: #420593) - Fixes slow load times seen in earlier 09.x versions (closes: #425796, #425661) * Stop using killproc for reloading logs, at least until it stops removing pidfiles out from under us (closes: #424618) -- Stephen Gran Thu, 31 May 2007 01:02:05 +0100 clamav (0.90.2-4) unstable; urgency=low * Make sure su gets a shell (closes: #424772) * Correct previous chown/chmod breakage (closes: #424758) -- Stephen Gran Fri, 18 May 2007 11:34:29 +0100 clamav (0.90.2-3) unstable; urgency=low * freshclam.postinst: s/chown/chmod/. Argg. (closes: #424128) -- Stephen Gran Tue, 15 May 2007 20:00:44 +0100 clamav (0.90.2-2) unstable; urgency=low * clamav-milter pid recognition fixup (closes: #419983) * clamav-freshclam doesn't need to copy in full databases if .inc directory is present (closes: #420024) * The init scripts now su to $User before starting the daemons (closes: #413624) * Oh, fine. Remove your /var/run on every reboot for no good reason (closes: #406576) * chown 0755 the .inc directories. This is a hack to workaround a temporary bug that is now fixed upstream, and we can drop this soon (hopefully) (closes: #417985) * Update Build-Dependncies to also use libcurl-dev (closes: #423623) -- Stephen Gran Mon, 14 May 2007 23:16:27 +0100 clamav (0.90.2-1) unstable; urgency=low * New upstream version - Fixes reconnect issue in non-block-connect (closes: #418935) - Fixes a segfault in pdf scanning (closes: #418849) * Update description to reflect new features in 0.9x (closes: #414884) * Translation: - Ru (thanks Yuriy Talakan )(closes: #416342) * Logcheck rule update for freshclam (thanks Jefferson Cowart ) (closes: #415073) -- Stephen Gran Fri, 13 Apr 2007 11:44:17 +0100 clamav (0.90.1-2) unstable; urgency=low * Another NotifyClamd fix that somehow didn't make it into the last upload (closes: #414407) * Remove references to Woody backports. No longer supported (closes: #412386) * Add more files to freshclam's purge list -- Stephen Gran Mon, 12 Mar 2007 23:00:42 +0000 clamav (0.90.1-1) unstable; urgency=low * New upstream version. - many memory leaks fixed. - soname version increase now upstream * Patches: - freshen 02_milter_sendmail_version_patch - freshen 20_clamscan-manpage-update.dpatch - freshen 24_nullmailer_ftbfs.dpatch - remove 25_soname_bump.dpatch (merged upstream) - remove 26_isspace_fix_segv.dpatch (merged upstream) * Another NotifyClamd fix: guard against it being accidentally set to 'true' on upgrade (closes: #411095) * Document use of a TCP socket with clamav-milter in README.Debian * Remove obsolete --mbox switch from clampipe * add --enable-dns-fix to ./configure (closes: #411921) * Remove spurious Conflicts/Provides libclamav (this results in attempting to remove libclamav1, which is not what we want). * Remove Provides libclamav1-dev from the -dev package. * Better /etc/init.d/ stop handling (closes: #411373, #411448) -- Stephen Gran Fri, 2 Mar 2007 03:18:31 +0000 clamav (0.90-1) unstable; urgency=medium * New upstream version (closes: #410966) * Patch rework: - freshen 02_milter_sendmail_version_patch - remove 05_freshclam_manpage.dpatch (obsoleted upstream) - freshen 19_freshclam-manpage-info.dpatch - freshen 20_clamscan-manpage-update.dpatch - freshen 24_nullmailer_ftbfs.dpatch - add 25_soname_bump - add 26_isspace_fix_segv.dpatch to address segv in entity normalization (taken from upstream CVS) * New freshclam option: ScriptedUpdates * Add manpage for clamconf * soname bump and library package rename due to dropped functions * Security issues addressed in this release: - [CVE-2007-0897] CAB File Denial of Service Vulnerability - [CVE-2007-0898] MIME Parsing Directory Traversal Vulnerability - [CVE-2007-0899] Possible heap overflow in libclamav/fsg.c -- Stephen Gran Thu, 15 Feb 2007 01:28:37 +0000 clamav (0.90~rc3-1) unstable; urgency=low * New upstream version - New config options: MailMaxRecursion PhishingSignatures * Add clamconf to clamav-daemon package * New translations: - gl (closes: #407281) * patch rework: - Remove 10_base64.dpatch (merged upstream) - Remove 22_libtoolize.dpatch (merged upstream: w0000t) - Remove 26_implicit_functions.dpatch (merged upstream) - Remove 25_kfreebsd.dpatch (merged upstream) - Freshen 20_clamscan-manpage-update.dpatch - Freshen 24_nullmailer_ftbfs.dpatch -- Stephen Gran Thu, 1 Feb 2007 02:10:55 +0000 clamav (0.90~rc2-2) experimental; urgency=low * CVE's unavailable at previous upload time fixed in -1: CVE-2006-6481 CVE-2006-6406 * NotifyClamd option handling was wrong for freshclam (closes: #403265) * Fix Foreground parsing bug in clamav-milter.init * Document postfix useage for clamav-milter, and include upstream INSTALL file which has more information (closes: #392224) * patches rework: libtoolizing is now a dpatch, to reduce patch size between releases in the future * New translation: - es.po (closes: #402668) -- Stephen Gran Sun, 17 Dec 2006 01:35:38 +0000 clamav (0.90~rc2-1) experimental; urgency=low * New upstream version - Can now disable options one by one (closes: #316330) - Fixes recursion based DoS (closes: #401874) * Patches: - Freshen all - Delete obsoleted ones - 10_base64.dpatch added for MIME bypass (closes: #401873) * New config file format dealt with in postinst * Freshclam now takes a PidFile argument - we don't need s-s-d to handle it * debian/rules check to make sure all config options are handled -- Stephen Gran Mon, 11 Dec 2006 13:44:54 +0000 clamav (0.88.6-1) unstable; urgency=low * New upstream version - incorporates freshclam non-block patch, thus dropping it from patches/ -- Stephen Gran Mon, 6 Nov 2006 11:19:38 +0000 clamav (0.88.5-3) unstable; urgency=low * Fix broken configure.in patch. Never mattered on systems where sendmail wasn't installed, but would make the build system fail to pick up local versions of sendmail on custom arrangements -- Stephen Gran Mon, 23 Oct 2006 23:18:59 +0100 clamav (0.88.5-2) unstable; urgency=high * Fix FTBFS with nullmailer (closes: #393672) * Urgency high because this was keeping security fixes out of testing * Noted here since they were unavailable at previous upload time: - IDEF1597 is CVE-2006-4182 (libclamav/rebuildpe.c) - IDEF1736 is CVE-2006-5295 (libclamav/chmunpack.c) -- Stephen Gran Thu, 19 Oct 2006 12:30:07 +0100 clamav (0.88.5-1) unstable; urgency=medium * New upstream version - libclamav/rebuildpe.c: fix possible heap overflow [IDEF1597] - libclamav/chmunpack.c: fix possible crash [IDEF1736] - urgency medium for this reason -- Stephen Gran Mon, 16 Oct 2006 01:40:57 +0100 clamav (0.88.4-4) unstable; urgency=low * Versioned build-dep on dpkg-dev so I can use ${binary:Version} * Actually remove Magnus this time * Add Recommends clamav-base to clamav (closes: #391038) * Fix parse problem is slurp_config() (closes: #384046) -- Stephen Gran Sun, 8 Oct 2006 13:39:15 +0100 clamav (0.88.4-3) unstable; urgency=low * Move logrotate handling to clamav-daemon.postrm (closes: #384011) * Apply upstream freshclam timeout patch (closes: #334911, #382353) * Actually install changelogs, symlink other docs. * Make binary packages binNMU'able * lsb init comments added to init scripts * Remove Magnus from Uploaders field, as it looks like he's really not coming back to it. Thanks for all your work, Magnus! * Add shlibsdeps to clamav-dbg -- Stephen Gran Mon, 2 Oct 2006 19:47:06 +0100 clamav (0.88.4-2) unstable; urgency=low * Just to note here for the security team, 0.88.4-1 fixed [CVE-2006-4018]: libclamav/upx.c: buffer overflow (CVE unavailable at upload time) * Fix up arguments to start_daemon() in init scripts (closes: #382092) * Fix override disparity -- Stephen Gran Tue, 8 Aug 2006 21:38:43 +0100 clamav (0.88.4-1) unstable; urgency=low * New upstream version - Fixes UPX unpacker overflow vulnerability (closes: #382004, 382007) * Add example for clamscan(1) (closes: #374614) * freshclam(1) typo fix (closes: #376152) * New translations: - pt (thanks Ricardo Silva ) (closes: #380216) - ja (thanks Kenshi Muto ) (closes: #379955) -- Stephen Gran Tue, 8 Aug 2006 11:24:05 +0100 clamav (0.88.3-1) unstable; urgency=low * New upstream version * New translatiosn: - nl (thanks Vincent Zweije ) (closes: #370271) - pt_BR (Andre Luis Lopes ) (closes: #374028) -- Stephen Gran Sat, 1 Jul 2006 15:04:11 +0100 clamav (0.88.2-2) unstable; urgency=low * Add -dbg package - this requires update to debian compat level 5 * upgrade to standards version 3.7.2 (no changes) -- Stephen Gran Thu, 18 May 2006 23:45:00 +0100 clamav (0.88.2-1) unstable; urgency=high * New upstream version - CVE-2006-1989 freshclam/manager.c: lack of proper check for the size of header data * Typo fix in debian/control (closes: #363201) * Fix cut-n-paste error in clamav-config.1 (closes: #364563) * Removed dpatches merged upstream * Upgrade to Standards Version 3.7.0 (no changes) * For security team: 0.88.1-1 fixed the following CVE's: CVE-2006-1614 (libclamav/pe.c,libclamav/others.h) CVE-2006-1615 (shared/ouput.c) CVE-2006-1630 (libclamav/others.c) These CVE Ids were unavailable at upload time. -- Stephen Gran Sun, 30 Apr 2006 12:35:19 +0100 clamav (0.88.1-1) unstable; urgency=low * New upstream release - Fixes segfault in bitset routine (closes: #360159) - Remerge patches (17_freshclam.conf_typos removed) * Rebuilding should fix libcurl linkage (closes: #355509) * Path to example conf file in clamav-daemon.init was wrong * New translation: - cs: (thanks Miroslav Kure )(closes: #356547) -- Stephen Gran Tue, 4 Apr 2006 16:34:04 +0100 clamav (0.88-4) unstable; urgency=low * Only use ucf, userdel, and groupdel conditionally in clamav-base postrm (closes: #351198) * Only use ucf conditionally in clamav-freshclam postrm (closes: #351225) * Manpage typo fixes (closes: #351005, #351006, #351007, #351008) -- Stephen Gran Fri, 3 Feb 2006 17:37:39 +0000 clamav (0.88-3) unstable; urgency=low * Reupload to try to triggter a rebuild with fixed debhelper -- Stephen Gran Tue, 24 Jan 2006 23:26:12 +0000 clamav (0.88-2) unstable; urgency=low * Actually rebuild ./configure with the magic to make pass_all work -- Stephen Gran Tue, 10 Jan 2006 02:55:18 +0000 clamav (0.88-1) unstable; urgency=high * New upstream version - [ libclamav/upx.c ]: fix possible heap overflow - [ libclamav/zziplib/zzip-zip.c ]: fix pointer misalignment problem on sparc64 - [ libclamav/zziplib ]: improve handling of incorrectly created/handcrafted zip archives. - Many other fixes * Urgency high due to security fixes * Updated all package descriptions. * Patch merged upstream: - 10_zzip_aligned_patch * Patch added: - 05_freshclam_manpage.dpatch (quiets lintain complaint) * Add versioned dependency on lsb-base - we use log_daemon_msg now (closes: #338414) * New Translation: - de (thanks Erik Schanze )(closes: #345697) -- Stephen Gran Tue, 10 Jan 2006 02:02:56 +0000 clamav (0.87.1-1) unstable; urgency=low * New upstream release - Upstream fix for possible infinite loop libclamav/tnef.c: IDEF1169] - Upstream fix for possible infinite loop libclamav/mspack/cabd.c: IDEF1180] - Upstream fix for buffer size calculation libclamav/fsg.c: ZDI-CAN-004] - Upstream fix for possible infinite loop libclamav/others.c,h, libclamav/ole2_extract.c: CAN-2005-3239] (closes: #333566) - Upstream fix for boundary checks libclamav/petite.c] - Upstream fix to scan attachments that have no file names libclamav/mbox.c] * Some more lsb changes to init scripts * New Translations: - it (Thanks Cristian Rigamonti )(closes: #330240) - sv (Thanks Daniel Nylander )(closes: #333400) * Move to dpatch for patch management, and add build-dependencies (dpatch and cpp) * Apply patch for bus error on sparc in zzip routines (closes: #322396) -- Stephen Gran Thu, 3 Nov 2005 23:21:30 +0000 clamav (0.87-1) unstable; urgency=low * New upstream version - Fixes CAN-2005-2920 and CAN-2005-2919 (closes: #328660) * New logcheck line for clamav-daemon (closes: #323132) * relibtoolize and apply kfreebsd patch (closes: #327707) * Make sure init.d script starts freshclam up again after upgrade when run from if-up.d (closes: #328912) -- Stephen Gran Mon, 19 Sep 2005 09:05:59 +0100 clamav (0.86.2-5) unstable; urgency=low * Make sure pidfile always expands to something in clamd init script (closes: #322564) -- Stephen Gran Thu, 11 Aug 2005 11:52:05 -0400 clamav (0.86.2-4) unstable; urgency=low * Really, I mean it this time, add the depends on lsb-base. -- Stephen Gran Thu, 11 Aug 2005 08:34:23 -0400 clamav (0.86.2-3) unstable; urgency=low * Forgot a Depends on lsb-base last time. Duh. -- Stephen Gran Wed, 10 Aug 2005 13:24:57 -0400 clamav (0.86.2-2) unstable; urgency=low * Get rid of broken check for timeout (closes: #320301) * Add a reload-log target to the init script, so that other packages can make clamd reload it's database easily (closes: #321725) * Start exising XSI'isms from maintainer scripts. * Switch to lsb-base init functions * Init script exits if if-up.d method has been chosen and at least one of the interfaces is up (closes: #319865) * New translations: it (thanks Cristian Rigamonti )(closes: #320793) * Documenting here what has not been previously documented just to keep the record straight for those interested. CAN's closed by _previous_ uploads, but not listed due to CAN unknown at time or other bad excuse: - 0.86.1: CAN-2005-1923 - 0.86.2: CAN-2005-2450 -- Stephen Gran Wed, 10 Aug 2005 08:34:53 -0400 clamav (0.86.2-1) unstable; urgency=high * New upstream version (closes: #319898, #320014) * This upload will build against new libgmp3 (closes: #317853) * This version fixes several security bugs, will put CANs in a later changelog for reference -- Stephen Gran Tue, 26 Jul 2005 08:57:49 -0400 clamav (0.86.1-2) unstable; urgency=high * Updated standards version (no changes) * Just a note for the security team's reference. Version 0.86.1 of clamav fixes the following security bugs: - CAN-2005-2070 - CAN-2005-2056 - CAN-2005-1922 Urgency high for this reason * README.Debian - explain that all conf files are handled by ucf, and add a pointer to ucf's documentation reagrding conffile handling (closes: #316049) * New translations - vi (thanks Clytie Siddall )(closes: #315804) -- Stephen Gran Fri, 1 Jul 2005 18:15:15 -0400 clamav (0.86.1-1) unstable; urgency=low * New upstream version * New translations - da (thanks Mohammed Adnene Trojette )(closes: #315396) - fr (thanks Claus Hindsgaul )(closes: #315410) -- Stephen Gran Thu, 23 Jun 2005 18:58:41 -0400 clamav (0.86-1) unstable; urgency=low * New upstream version * Pull unneeded dh_installdocs and arguments out of debian/rules (closes: #314747) * Properly check for sendmail version to be non-null in configure.in before defining macros (closes: #314752) * Define sendmail version macros to be the same as current Debian packages of sendmail if those macros are undefined - temporary fix until upstream porperly use #if defined before checking values. Also lets milter build with correct behavior for Debian sendmail users, without having to have sendmail as a build dep for something we already know (closes: #314914) -- Stephen Gran Mon, 20 Jun 2005 17:12:57 -0400 clamav (0.85.2-0.86rc1-1) unstable; urgency=low * New Upstream Version (complete with hideous version number to allow upgrades) *sigh* * Allow for entry 'none' in LogFile debconf entry, disabling LogFile directive (closes: #309444) * Also disable logrotate file if it was previously enabled, but there is now no LogFile directive. * Multiple typo fixups in documentation (closes: #310014, #310015, #310016, #310017) * README.Debian erroneously still recommended reconfiguring clamav-daemon, although the debconf stuff has been moved to clamav-base * Loosen permissions on freshclam.conf if proxy password not used (closes: #310238) * Fix stray -e in echo statement (closes: #313198) * move db_stop in clamav-daemon's postinst, so that it actually stops debconf before doing anything that needs input or output (closes: #308740) * New translations - de (thanks Erik Schanze )(closes: #311706) - ru (thanks Yuriy Talakan' )(closes: #311969) - vi (thanks Clytie Siddall )(closes: #313359) -- Stephen Gran Mon, 13 Jun 2005 20:56:44 -0400 clamav (0.85.1-2) unstable; urgency=low * How about I remember the acinclude patch this time -- Stephen Gran Mon, 16 May 2005 20:45:53 -0400 clamav (0.85.1-1) unstable; urgency=low * New upstream version -- Stephen Gran Mon, 16 May 2005 19:07:40 -0400 clamav (0.85-1) unstable; urgency=low * New upstream version (closes: #308758) * Better logcheck line for freshclam (closes: #307189) * freshclam's postinst uses /dev/urandom instead of /dev/random now - no reason to block for perfect entropy when generating a cron job :) * Implement a 'reload-log' init script target for freshclam and clamd, so that logrotate does the right thing. (closes: #308153) -- Stephen Gran Thu, 12 May 2005 09:20:15 -0400 clamav (0.84-2) unstable; urgency=medium * New logcheck lines for freshclam (closes: #307062) * Urgency is medium - should really have been medium for -1. The reason for this urgency is to get a fix for #304123 into sarge. -- Stephen Gran Sat, 30 Apr 2005 09:56:23 -0400 clamav (0.84-1) unstable; urgency=low * New upstream version Fit for sarge (closes: #304059) * Fix logrotate to only HUP freshclam if pidfile is present. This is for people who don't run it as a deamon (closes: #306678) -- Stephen Gran Fri, 29 Apr 2005 10:08:31 -0400 clamav (0.83.84rc2-2) unstable; urgency=low * Tighten permissions on freshclam.conf (may have passwords in it) (closes: #305483) * Put pointer to README.Debian in autogenerated clamd.conf, and explanation of why non-default configuration options have been chosen (closes: #292870) * Remove all reload targets in init scripts (the clam suite does not yet reread it's configuration on HUP). Replace all calls to reload in logrotate scripts with kill -HUP (closes: #305590) -- Stephen Gran Fri, 22 Apr 2005 12:06:31 -0400 clamav (0.83.84rc2-1) unstable; urgency=low * New upstream version * New clamav-milter logcheck lines -- Stephen Gran Tue, 19 Apr 2005 23:03:48 -0400 clamav (0.83.84rc1-1) unstable; urgency=low * New upstream version (0.84rc1) Freshclam: - URL added to verbose output for freshclam (closes: #231865) - mutex using logg() code removed from freshclam signal handling, which fixes hang during update (closes: #274255, #274646, #292487) libclamav: - Fixes digest handling bug (closes: #299469) - better tar file (and by extension, deb) support (closes: #300223) * Clarify the warning about ScanMail (it is enabled by default, after all) * New logcheck files (thanks Marc Sherman ) (closes: #302253, #302254) -- Stephen Gran Sat, 9 Apr 2005 19:14:52 -0400 clamav (0.83-5) unstable; urgency=low * Typo fix in README.Debian (thanks Tomasz Papszun for noticing) * Fix redirection error in clamav-freshclam.postinst (closes: #301032) -- Stephen Gran Wed, 23 Mar 2005 09:16:11 -0500 clamav (0.83-4) unstable; urgency=low * Typo fix for ucf handling of freshclam cron.d file * Make sure ucf cache directory is there before copying into it (closes: #297589) * Add another logcheck ignore for freshclam (closes: #299546) * Documentation update: - some reorganization, and addition of headers so sections are more clearly delimited. - sample exim4 integration provided (closes: #297748) * Better debconf/ucf handling in clamav-daemon.postinst (closes: #300779) -- Stephen Gran Mon, 21 Mar 2005 15:56:11 -0500 clamav (0.83-3) unstable; urgency=low * Typo fix in NEWS.Debian * Actually don't compress clamd.conf (duh) (really closes 295565 this time) * Split out common functions for better maintainability. * Put logrotate.d/clamav-daemon back into clamav-daemon package (closes: #296196) * New Translations: - cs (thanks Miroslav Kure ) - fr (thanks Mohammed Adnène Trojette )(closes: #295905) - pt_BR (thanks André Luís Lopes ) -- Stephen Gran Sat, 26 Feb 2005 21:50:53 -0500 clamav (0.83-2) unstable; urgency=low * Don't compress example clamd.conf (closes: #295565) * Add dh_installman rule to clamav-base (closes: #295569) -- Stephen Gran Thu, 17 Feb 2005 20:06:55 -0500 clamav (0.83-1) unstable; urgency=low * New upstream version - No longer uses SESSION in clamav-milter (should close 294666, but will wait for confirmation) - Fixes false positives on RIFF files (closes: #294799) * Add clamav-milter logcheck files * Change timeout in kill of clamav-milter - it just shouldn't take that long * Move configuration of clamd.conf to the package clamav-base, and decouple clamav-milter from clamav-daemon. Now that clamav-milter can run without clamav-daemon, there is no reason for this dependency. * Sadly this will blow up upgrades of clamav-milter that _do_ use clamd for scanning - apt/dpkg sets them up in essentially random order, so it is equally likely that the milter will get set up first and bail since it can't connect to clamd. Waiting for the bug reports, but I see no other way to do this properly. * Since this involved a total reworking of the debconf stuff anyway (sigh), I have added debconf support for ArchiveMaxCompressionRatio (closes: #291414) * Make sure that default values match in clamav-base for DataBaseDirectory (closes: #294402) * error trapping in freshclam.postinst if check frequency is greater than 24 and run from cron - this script does not gracefully handle that yet, so we trap the error and move on. Thanks to John R. Shearer for catching this. * New Translations: - da (thanks Claus Hindsgaul ) - it (thanks Cristian Rigamonti ) - ja (thanks Kenshi Muto ) -- Stephen Gran Mon, 14 Feb 2005 14:54:51 -0500 clamav (0.82-1) unstable; urgency=low * New upstream version (closes: #294095) * New translations: - cs (thanks Miroslav Kure )(closes: #293609) * Re-add freshclam logcheck files (closes: #284732) * 0.81 fixed CAN-2005-0218, noted here for completeness, as this vulnerability was not announced until after 0.81 was already uploaded. -- Stephen Gran Mon, 7 Feb 2005 18:03:32 -0500 clamav (0.81-2) unstable; urgency=high * Dammit! Forgot to fix acinclude.m4 so that all arches get pass_all instead of retarded magic file test. Let's try again. Sigh. * urgency=high t fix security bug in sarge (CAN-2005-0133, actually fixed in 0.81rc1, but this looks like it's the first version taht will make it). -- Stephen Gran Thu, 27 Jan 2005 23:46:51 -0500 clamav (0.81-1) unstable; urgency=low * New upstream version - programs now report normal messages on stdout, and errors and warnings on stderr - this lets me better handle freshclam cron jobs, so warnings will now be seen by admins (closes: #247180, #279249) * Fixed bug in clamav-milter.init (upstream is trying to work around 2.4 kernel bugs in thread signal handling the same way I was, and this caused, er, strange results) * Add html/ docs back in (manually generated and uuencoded images, blech - have to get upstream to start making them themselves) Also make my own icons, to avoid any licensing problems with latex2html, at least until it is released under the GPL in the next version. * Add support for new options: - clamd: ExitOnOOM, StreamMinPort, StreamMaxPort and LeaveTemporaryFiles - freshclam: AllowSupplementaryGroups * Please read NEWS.Debian for notes about clamav-milter! -- Stephen Gran Thu, 27 Jan 2005 20:03:18 -0500 clamav (0.80-0.81rc1-1) unstable; urgency=medium * New upstream version - Fixes endless loop in VBA scan (closes: #288762) - Fixes parsing of certain invalid MIME boundaries (closes: #277531) - Fixes X-Virus_Scanned header (closes: #278300) - Fixes problem with hard links in GNU tar archives (closes: #283748) - ArchiveBlockMax now also applies to ArchiveMaxRecursion (closes: #290250) * urgency is medium due to fixing endless loop and ArchiveBlockMax bug - these should go into sarge soon, if possible * Upstream has removed the html documentation from this version, so there are no more broken links (closes: #284072) * Add logcheck files for freshclam (closes: #284732) * New translation: - fr.po (closes: #285562) * New subdirectories of /etc/clamav/ and notes in README for run-parts style scripts on update, error, and virusevent. Allows packagers and admins to drop scripts in transparently, although feature is disabled by default. (closes: #288691) * Split out -docs package (closes: #290756) * This gives me a chance to rename libclamav1-dev to libclamav-dev, and totally reorganize packaging of redundant documentation (liberal usage of dh_link, IOW) * Properly escape hyphens in clamav-config manpage * Lowercase all first letters of short descriptions -- Stephen Gran Fri, 21 Jan 2005 00:06:33 -0500 clamav (0.80-7) unstable; urgency=low * Remove milter pid in postrm, in case it's not already gone (makes purge a little smoother) * Check for ucf file existence before copy in transition to clamd.conf (closes: #281867) -- Stephen Gran Thu, 18 Nov 2004 18:26:24 -0500 clamav (0.80-6) unstable; urgency=low * Maintaining versioning even thoug -5 never got uploaded. Thanks to all who run debs from p.d.o for extra testing of new init scripts. * Rewrite clamav init script to actually be portable - thanks to squid maintainers, from which I borrowed liberally. Thanks especially to Elrond and Robert Schmidli for assistance in debugging and testing. * freshclam init script no longer produces spurious error message (closes: #281514) * Again with parser fixups (freshclam, clamd) * New translations: - da.po (Thanks Claus Hindsgaul ) - de.po (Thanks Erik Schanze ) - es.po (Thanks Javi Castelo ) -- Stephen Gran Tue, 16 Nov 2004 18:29:39 -0500 clamav (0.80-5) unstable; urgency=low * Maintainer script review: - clamav-milter: instead of -R to start-stop-daemon, we find the right thread and signal that one, and loop until it dies. Much better behavior here, at least. Note that this approach is a hack for 2.4 kernels. Also patch for $SOCKET upgrades, in case someone has set an alternate one from default. Should work without intervention now. - clamav-daemon and clamav-milter: Trying to get away from the -R option to start-stop-daemon (which produces error message with the milter), we wait until the pid is actually gone. (closes: #278198) - clamav-daemon and clamav-freshclam parser for conf file (preseeding debconf and so forth) reworked a bit for better support of options that may have whitespace in them. * Remove milter dependency on sendmail, now that (finally) libmilter is packaged seperately * Add /etc/mail/m4/clamav-milter.m4 (thanks Elrond for patch)(closes: #280048) Please see /usr/share/doc/clamav-milter/README.Debian for usage instructions. * Only look for ^clamav (as opposed to ^clamav:) in /etc/aliases - postfix apparently doesn't use the colon. -- Stephen Gran Sat, 13 Nov 2004 12:54:47 -0500 clamav (0.80-4) unstable; urgency=low * Add '|| true' to newaliases invocation in clamav-base (closes:#279724) * Updated translations: - it (thanks Cristian Rigamonti )(closes: #279849) - ja (thanks Kenshi Muto ) -- Stephen Gran Fri, 5 Nov 2004 08:54:41 -0500 clamav (0.80-3) unstable; urgency=medium * Fix libclamav1-dev dependencies (closes: #277843) * Don't enforce local: type socket on clamav-milter - this change should be transparent for anyone who hasn't touched the defaults, but will bite anyone who has. Please make sure you review your /etc/default/clamav-milter if you have made any modifications. (closes: #277505) * dpkg-reconfigure works again (failed on StreamSavetoDisk - incomplete ripping out of deprecated option). (closes: #279129) (I think) * Updated translations: - fr (thanks Christian Perrier )(closes: #279450) - pt_BR (thanks Andre Luis Lopes ) -- Stephen Gran Wed, 3 Nov 2004 18:32:25 -0500 clamav (0.80-2) unstable; urgency=low * Change Build-Depends: - libcurl-dev to libcurl3-dev - add bc (for configure test) * Some missed updates for new config file name: - clamav-milter.README.Debian - clamav-base.postinst - clamav-freshclam.init - clamav-milter.init - README.Debian (clamav-base) - clamav-daemon.config - clamav-freshclam-ifupdown * Better ucf management of new clamd.conf on upgrade * Add /etc/cron.d/clamav-frechlam to ucf management (oops) * ucf -p freshclam.conf and cron.d/clamav-freshclam in postrm * Fix freshclam preconfigure warning (test with apt instead of dpkg, Steve) (closes: #277274) * Some code reorganization in postinsts for freshclam and daemon - mainly making functions of repetitive code blocks. * debian/control typo fixed (closes: #277215) (thanks Florian Zumbiehl ) * Now that freshclam does a DNS lookup preferentially over HTTP lookups, the default number of checks has been raised to 24 - if you are upgrading, feel free to raise it from the old default of 12 -- Stephen Gran Tue, 19 Oct 2004 23:53:10 -0400 clamav (0.80-1) experimental; urgency=low * New upstream version (closes: #270265) * Many many changes and cleanups, but the biggies are: - Detects jpeg attacks (closes: #273889) - Clearer error messages (closes: #255954) - conf file for clamd{,scan} is now clamd.conf (Arrgh!) - Several new conf file directives, selected ones added by default. ScanOLE is now added for new installs and this upgrade only (closes: #272809) - StreamSavetoDisk is now deprecated, and will cause clamd to not start if it is found in the (renamed) conf file. Remove automatically on upgrade, hopefully. - New option for freshclam - DNSDatabaseInfo. Will do database lookups via DNS TXT records, rather than using HTTP HEAD as before. * Add absolute path to note in NEWS (closes: #269430) * Fix freshclam's cron script not to fail after --remove (closes: #270789) * Add warning note about new socket location for upgrades from ancient versions. Hopefully this will stop or slow the bug reports from people upgrading from versions where clam still ran as root. (closes: #265606) * Change units from Mb to MB in debconf question (closes: #269616) * Parser fix to handle extra whitespace in conf files during postinst/config (closes: #273805) * Add country names to mirror selection question for freshclam - all country codes and country names are from http://www.iana.org/cctld/cctld-whois.htm Any compaints about country names should be directed to IANA. (closes: #270436) * Preseed debconf with $http_proxy for freshclam proxy question (closes: #266436) * New translations: - de (thanks Erik Schanze ) - es (thanks Javi Castelo ) - fr (thanks Mohammed Adnene Trojette ) (closes: #274675) - it (thanks Cristian Rigamonti ) - ja (thanks Kenshi Muto ) - nl (thanks Tim Dijkstra ) (closes: #274356) -- Stephen Gran Mon, 18 Oct 2004 19:48:21 -0400 clamav (0.75.1-4) unstable; urgency=medium * New da.po (thanks Claus Hindsgaul ) (closes: #268386) * Better formatting for fr.po (thanks Ludovic Rousseau ) (closes: #266433) -- Stephen Gran Sat, 28 Aug 2004 14:39:07 -0400 clamav (0.75.1-3) unstable; urgency=low * Add lintian overrides for translations * A little more readability cleanup in maintainer scripts * Fix clamav-freshclam's postinst to generate a random number using perl, instead of relying on bashisms (closes: #263167) * Fix clamav-base's postinst for the case where clamav-daemon is not installed, so it properly deals with directory permissions even in the absence of clamav.conf (closes: #261636) * Fix the ifupdown scripts to handle more recent pppd run-parts invocations. mea culpa - I only have access to a woody machine that uses pppd. (closes: #265137) * Updated translations: - da (thanks Claus Hindsgaul ) - de (thanks Erik Schanze ) - es (thanks Javi Castelo ) - fr (thanks Christian Perrier ) - it (thanks Cristian Rigamonti ) (closes: #262704) - ja (thanks Kenshi Muto ) - nl (thanks Tim Dijkstra ) - pt_BR (thanks Andre Luis Lopes ) -- Stephen Gran Sun, 15 Aug 2004 19:15:42 -0400 clamav (0.75.1-2) unstable; urgency=low * Fix quoting problem inpostinst when multiple group names entered (closes: #262433) -- Stephen Gran Fri, 30 Jul 2004 21:03:30 -0400 clamav (0.75.1-1) unstable; urgency=low * New upstream release (closes: #261672) - Additional patch from Nicolas Boullis to fix read from stdin when clamd listens on a unix socket. (closes: #260322) - Fixes segfault with LogSyslog on PPC (closes: #250320) * Remove duplicated NEWS/README from clamav (closes: #261813) * init script changes: - Add support for running clamd and clamav-milter under daemon to init scripts. See clamav-base/README.Debian for details (closes: #250008) - Change test for milter's socket to use -e instead of -f (duh) * Some readability cleanup in maintainer scripts, and more code cleanup: - Add an if -d to clamav-base.postrm to get rid of some annoying but harmless error messages. - Add if -e before chmod call in clamav-freshclam postinst; the ppp scripts are technically conffiles, so if the local admin removes them manually, dpkg won't put them back, and postinst will blow up (closes: #258885) * Some additional (*sigh*) debconf questions: - Upstream is again changing their mirror network around. New question about mirrors. - Question about adding clamav to extra groups. (closes: #250335, #250691, #255733, #256892) -- Stephen Gran Thu, 29 Jul 2004 23:01:05 -0400 clamav (0.74-1) unstable; urgency=low * New upstream version - Additional patch from Tomasz Kojm to fix hang on stdin with clamdscan * More cruft cleanup - this time in clamav-freshclam.postinst * debhelper build-depend tightening (closes: #259257) * Aadd a sleep to clamav-milter.init, so it restarts a little more gracefully (hopefully) (closes: #259161) * Add amavis reference to README (thanks Andrea Borgia ) * New translations: - German (thanks Erik Schanze ) - Spanish (thanks Javi Castelo ) - Dutch (thanks Tim Dijkstra ) (closes: #259272) -- Stephen Gran Thu, 15 Jul 2004 22:33:53 -0400 clamav (0.73-2) unstable; urgency=low * Change dependency versioning for clamav-milter * Fix up overthought ucf call in clamav-base that ended up making ucf think manually managed conf file was unmodified and safe to overwrite. (closes: #255428) * Stop cleaning up after the daemons (clamd, freshclam, milter) in init scripts. It seems they all (with the exception of the milter) do a decent job cleaning up after themselves now. The milter leaves behind a pidfile, which is sloppy, but doesn't seem to harm anything. This should fix the problems on upgrade. (closes: #255437, #255436) * Remove unnecessary depends/recommends from clamav-testfiles - these testfiles could be used for any A/V suite, and have nothing specific to do with clamav. (closes: #255370) -- Stephen Gran Mon, 21 Jun 2004 22:26:45 -0400 clamav (0.73-1) unstable; urgency=low * New Upstream Version - adds pkgconfig and clamav-config to libclamav1-dev - Fixes some crash situations with OLE viruses, and some mbox code cleanup * Add --with-tcpwrappers to ./configure * Stop creating a logrotate file if logfile is under /dev (e.g., stderr/stdout - multilog or other users) * Add clamav user to /etc/aliases (closes: #253960) * Add an ignore.d.server logcheck file for clamav-daemon (closes: #253255) * Remerge sample conf file changes - they also got lost on upgrade, somehow * Rework debconf templates with a lot of help from Christian Perrier and Cristian Rigamonti . String freeze after this, hopefully. (closes: #253344) * New translations: - German (thanks Claus Hindsgaul ) - French (thanks Christian Perrier ) (closes: #253581) - Italian (thanks Cristian Rigamonti ) (closes: #254030) - Japanese (thanks Kenshi Muto ) - Brazillian (thanks André Luís Lopes ) (sorry if your name gets mangled here) -- Stephen Gran Sat, 19 Jun 2004 11:42:41 -0400 clamav (0.72-1) unstable; urgency=low * New upstream release - Fixes read from STDIN oddity (closes: #250806) * Add debian/watch * Re-add an '|| true' to the rmdir calls in clamav-base's postrm. They somehow got lost in the last upload. (closes: #252955) * New Danish translation (thanks Claus Hindsgaul ) (closes: #252511) -- Stephen Gran Sun, 6 Jun 2004 15:38:58 -0400 clamav (0.71-3) unstable; urgency=low * Forcibly remove pidfile in clamav-milter.init. It seems clamav-milter has some problems cleaning up after itself. Also use -R to keep trying until really dead. * Add debconf question about User setting for clamav.conf - will be displayed on upgrade if User directive is unset, otherwise not seen until dpkg-reconfigure * Add AllowSupplementaryGroups (closes: #250634) for new installs and upgrades from <= 0.70-2 * New German translation (thanks Erik Schanze ) (closes: #250947) -- Stephen Gran Tue, 1 Jun 2004 19:52:38 -0400 clamav (0.71-2) unstable; urgency=low * Fix broken clamav-milter init script. Reality apparently does not match the man page: -i is not a real option, although it is supposed to be the same as --pidfile. -- Stephen Gran Sat, 22 May 2004 00:01:12 -0400 clamav (0.71-1) unstable; urgency=low * New upstream version - clamav-milter now uses --pidfile, so can fix init script to use -p - clamscan no longer follows symlinks on archive scanning (closes: #247574) - Can scan msexpand files (closes: #245240) * Change group for logfiles to adm. * Fix error in md5sum comparison in clamav-freshclam.config (closes: #247815) * clamd no longer runs as root - see NEWS.Debian for more information (closes: #248419) * Manually change pid file for clamav-daemon to /var/run/clamav/clamd.pid - no breakage should occur, and this will assist people with new change to running as unpriviledged user (closes: #238915) * Add contrib directory to clamav - this package is getting overloaded now, I think * Finally get around to including joey's clampipe (closes: #209087) * Forgot to close this earlier, but it has built just fine on woody for some time (closes: #236098) * Manually deal with permissions on /etc/network and /etc/ppp files in postinst - I still see some installs without -x bit set * Add multiple interface handling for freshclam and ifup/down method (closes: #239217, #245230) -- Stephen Gran Thu, 20 May 2004 22:23:12 -0400 clamav (0.70-4) unstable; urgency=low * Fix clamav-milter.init thinko (closes: #246919) -- Stephen Gran Sun, 2 May 2004 10:07:00 -0400 clamav (0.70-3) unstable; urgency=low * Some reworking of freshclam.config, to make sure that no user changes are lost on upgrade (same changes as to clamav-daemon, but for some reason I didn't port them over to freshclam) * Moved db_stop out of case . . . esac statement, to make sure the running debconf instance is never stopped before ucf is called (closes: #246611) -- Stephen Gran Sat, 1 May 2004 13:15:03 -0400 clamav (0.70-2) unstable; urgency=medium * Urgency medium again - still trying to get this into testing * Fix typo in freshclam description (closes: #244654) * Updated init scripts to not uses --exec on stop, and also to use --retry in case signal handling issues aren't completely resolved * Add /etc/default/clamav-daemon for setting environment variables before starting clamd. (closes: #246313) * Do a slightly smarter job preserving user changes on upgrade (closes: #245379) * Updated translations: - French (thanks Christian Perrier )(closes: #244045) - Danish (thanks Claus Hindsgaul )(closes: #244445) - Japanese (Thanks Kenshi Muto )(closes: #245431) -- Stephen Gran Wed, 28 Apr 2004 13:14:00 -0400 clamav (0.70-1) unstable; urgency=medium * New Upstream release * Urgency medium due to impending change of sigtool and database format change - version in testing will not support change. * Try to handle rename of ArchiveDetectEncrypted to ArchiveBlockEncrypted * Unless previously set, LogFileMaxSize is now set to 0 (disabled) by default - it's handled by logrotate, so this shouldn't be an issue * Got a little smarter about registering the file with ucf on first run this time around -- Stephen Gran Sat, 17 Apr 2004 19:38:26 -0400 clamav (0.69-0.70-rc-3) unstable; urgency=low * New French translation (thanks Christian Perrier ) (closes: #244045) -- Stephen Gran Fri, 16 Apr 2004 09:01:12 -0400 clamav (0.69-0.70-rc-2) unstable; urgency=low * Remove mentions of dazuko from debian/control (closes: #243217) * Add dh_installchangelogs for all binary packages built from same source * Try to work around renaming of config file option ThreadTimeout to ReadTimeout. *sigh* (closes: #243550) * New Danish translation (thanks Claus Hindsgaul ) (closes: #243562) -- Stephen Gran Thu, 15 Apr 2004 13:16:01 -0400 clamav (0.69-0.70-rc-1) unstable; urgency=low * New Upstream Version - Fixes segfault on some RAR archives (closes: #238986, #240472) - New thread manager should eliminate most of the problems of clamd children dying (closes: #238916) * sgran: * Add /etc/ppp/ip-{down,up}.d scripts for ppp users of freshclam. * mirrors.txt debconf note has been changed to reflect what actually happens - mirrors.txt is removed if unchenged, and backed up otherwise (closes: #242657) * clamav-base postinst no longer does permissions check if default setup is being used - let's not try to be too smart here (closes: #237146) * Work begun to ease backporting to stable. postinst now does some checks to see what version of ucf is available, because debconf-ok is not available in the version in stable. Still have to manually deal with it in debian/control, but it's improving. * This version builds against gcc 2.95 again, removing the Build-Dependency on gcc (>=3.0). Have to rethink how to do that so that it works a little better in the future anyway. (closes: #236769) * Add a 'head -n1' to the config file parser. This prevents people from having multiple lines with the same option, but that would be a broken config file anyway. * Manually set x bit on /etc/network/if-{up,down}.d scripts, as it seems the handling has been inconsistent. I see the bit set correctly, but there have been reports otherwise. Consistency is better, even if it feels kludgy. * Use delaycompress in logrotate files, so we don't have any open file descriptors trying to write to a now gzipped file. * New version has TCPWrappers support, add Build-Depends on libwrap0-dev * Fix up NEWS.Debian so that the real default socket is actually described. (closes: #238917) * Add note to NEWS.Debian about permissions on directories needed by clamav - permission problems will be corrected, but only if the default setup is being used. * New translations: - Dutch (thanks Tim Dijkstra ) (closes: #239330) - Japanese (thanks Kenshi Muto ) (closes: #237783) -- Stephen Gran Sun, 11 Apr 2004 15:51:47 -0400 clamav (0.67-7) unstable; urgency=low * sgran: * Updated French translation (thanks Christian Perrier ) (closes: #235742) * Clean up clamav-freshclam package description * Now adds old mirrors.txt contents into freshclam.conf but has them commented out to begin with. The default is to only use the round robin mirror address, so this is probably best - I just don't want to throw away old configuration settings. (closes: #236180) Also fix quoting problem on inserting them into file. * Fix versioned depends on ucf - should have been 0.28, not 0.30 * Fix stupid thinko in /etc/logrotate.d script (create should be earlier) (closes: #236603) * tlamy: * Used some CVS code: - qmail bounces get scanned if ScanMail is enabled - clamav-milter looks if clamd is available at start - Some bounce messages weren't properly recognized as mails, so they weren't scanned - New config option for clamav.conf ArchiveDetectEncrypted added to postinst. Man page fixup for this new option for clamav.conf and clamscan. * Removed preliminary code for bounce scanning (closes: #235792, #235992) * Added preliminary code to prevent #235792, #235992 in the future -- Stephen Gran Sun, 7 Mar 2004 19:36:04 +0100 clamav (0.67-6) unstable; urgency=low * Add line break in clamav-milter.8 (closes: #235452) * Add a longer sleep, and an earlier socket removal, to clamav-milter.init. Hopefully this will help it restart more cleanly (closes: #235463) * Fix my totally stupid lack of error checking in clamav-base.postinst, so that it actually works as intended in the permissions checking section (closes: #235624) * Better logic for clamav-freshclam.postinst, and if-up.d scripts. - postinst doesn't place rc*/ links unless set to run as daemon, and will remove if reconfigured to run as something else. - postinst creates /var/lib/clamav/interface if configured to run from ifup.d, and removes it if not. - if/up.d scripts just exit if /var/lib/clamav/interface doesn't exist, instead of complaining unnecessarily (closes: #235561) * Some more general cleanup in clamav-freshclam.postinst - better grouping of sections, better comments, better output to stdout * ifup scripts are not called with an argument, so if [ -n "$1" ] has been corrected to [ -z "$1" ] * Now ship cvd's in /usr/share/doc/clamav-freshclam/examples, and only cp them into DataDirectory if they don't exist after trying to run freshclam once. These files are really dynamic data, and should not be under package management. The downside of not doing this hackish system is if the the user is installing from cd or something, everything else in the clam* packages breaks without something there. This will hopefully protect the user who wants to run freshclam once a week from his dialup, while still keeping these files out of dpkg's control. Also move the removal of these files from purge to remove, so that a normal apt-get install clamav-data will remove the files, before installing the new package. (closes: #234928) * Also mention more prominently that freshclam needs an internet connection, and that people who intend to not have one should instead opt for clamav-data (although how they're going to get updated versions of that is left as an exercise for the end user) * Some more packaging cleanup: clamav: - Don't gzip html, css, png or pdf files clamav-daemon: - Don't gzip sample conffile clamav-testfiles: - get rid of redundant extra mbox code checker in /usr/share -- Stephen Gran Mon, 1 Mar 2004 23:48:34 -0500 clamav (0.67-5) unstable; urgency=low * Fix stupid typo in if-up/down script (closes: #235313) * Make freshclam more error tolerant - thanks Luca 'NERvOus' Gibelli for patch for reading config file * New Danish translation, thanks to Claus Hindsgaul (closes: #235337) * Put in some rough checking that permissions are set properly for clamd to run in clamav-base.postinst - probably will cause more false alarms than good, but it is a step in the right direction. Thanks Josip Rodin for coming up with the idea * Run autoreconf in source dir, hopefully fixing FTBFS on mips * Remove call to autoreconf -v from debian/rules (why did anyone want that there, and how did I miss it for so long?) * Also rmdir /var/lib/clamav on purge (if dpkg doesn't) -- Stephen Gran Sat, 28 Feb 2004 21:42:47 -0500 clamav (0.67-4) unstable; urgency=low * sgran: * Added versioned Build-Depend on gcc, since the build blows up with 2.95, adding a little work for backporting * Make logrotate scripts use reload, since Thomas got clamd and freshclam to accept a HUP signal and reopen their respective logfiles. Will hopefully make both more stable, as we're not trying to kill and restart them every week * Properly check if freshclam is being run from cron or manual before putting a 'Checks' line into the config file (Checks will be an empty field if it's being run from cron or manually, and this breaks the config file) (closes: #235276, #235289) * Only chown logdir, datadir, and rundir on fresh install (closes: #235193) * Stop relying on debhelper for starting and stoping of freshclam - now it really won't get started on install/upgrade. (closes: #235292) * tlamy: * Patch up freshclam/notify.c error messages produced during attempt to notify clamd. Error messages are now more helpful about what went wrong when attempting to notify clamd about updates, if NotifyClamd is set in freshclam.conf (closes: #234916, #234922) * Better option parsing in freschlam/options.c * Better signal handling in freshclam/freshclam.c -- Stephen Gran Sat, 28 Feb 2004 10:22:39 -0500 clamav (0.67-3) unstable; urgency=low * The "Let's Clean This Thing Up" release * sgran: * clamav-freshclam: - Fixup for clamav-freshclam init script - better parsing of options allowing for spaces in OnUpdate commands. (closes: #214279) - Better error reporting in clamav-freshclam init script - All of the debconf questions have been rewritten, thanks to suggestions from the many helpful translators who have worked on this package. They now follow the guidelines at http://people.debian.org/~bubulle/dtsg.txt (closes: #233241, #233525) - Rework clamav-freshclam config, postinst, and templates. Should avoid asking unnecessary questions about conffiles after this upgrade (closes: #233610). - Move Interface option out of freshclam.conf and into seperate file, so freshclam doesn't have parse errors (closes: #234919) - postinst generated config file should now finally add back in any options the local admin has put in the config file that are not part of the debconf questions. - update ucf dependency, so that it has --debconf-ok * clamav-daemon: - Fix up some spacing issues in debconf templates - Also some minor changes in debconf question type - mostly changing of unnecessary 'select' to 'boolean' to make life easier for translators (closes: #233862) - Got rid of all the 'question #foo of 28 ...' - Similar debconf style cleanup as freshclam, above. - Rework clamav-daemon config, postinst, and templates. - postinst generated config file should now finally add back in any options the local admin has put in the config file that are not part of the debconf questions. Should also respect previous config file options, and will preseed the debconf interaction with the choice found in the config file. - update ucf dependency, so that it has --debconf-ok - generate cron.d with user option correvtly (closes: #234458) * clamav: - Add in some more documentation to the clamav package - provided by upstream but previously left out of the package itself. * Source package: - Fix NEWS.Debian so apt-listchanges will display it (closes: #233795) - Find and add back in the French po file (closes: #232010) - Add new Danish translation (thanks Claus Hindsgaul ) - New Japanese translation (thanks Kenshi Muto ) - New French translation (thanks Christian Perrier ) - Fix clamscan's manpage to refer to the new-style databases (closes: #234927) * tlamy: * freshclam: - freshclam -d now writes it's pid file if configured in freshclam.conf (closes: #232206) and also re-opens it's log file on SIGHUP * clamd: - Handle bounces better by both scanning for bounce delimiters and multipart delimiters (closes: #232244) - handles SIGHUP by reopening it's log file, allowing more graceful reloads after logrotate. * -- Stephen Gran Fri, 27 Feb 2004 00:55:12 -0500 clamav (0.67-2) unstable; urgency=low * Correct debian/rules thinko - Correct ordering of build targets now. -- Stephen Gran Mon, 16 Feb 2004 19:42:09 -0500 clamav (0.67-1) unstable; urgency=low * New Upstream Release (closes: #232904) * Use orig.tar.gz (groan)(closes: #231963) * Add NEWS.Debian telling people about changed default run/ directory - now /var/run/clamav. This should not actually change the conffile, but only affect new installs, but it seems that it has bitten at least on person. (closes: #231962) * Finally find and fix the broken acinclude.m4 that was causing libtool to link incorrectly on mips* (closes: #231970) * Added MaxAttempts to default freshclam.conf, so that it will try up to 5 times if the first mirror is broken. (closes: #232221) * Add in the po files submitted via the BTS. Note that they will need to be retranslated for the changed string sets. (closes: #211902, #218900, #227368, #230337, #232010) * Remove trailing space in freshclam init script output (closes: #232468) * Remove old symlink for handledaemon, left over from 0.60 (closes: #232440) * Freshclam now has the ability to execute a command on update, or on error. (closes: #214279) * Remove var/lib/clamav/clamav-freshclam.debconf on purge (closes: #212653) * Explicitly remove ucf generated files, in case ucf -p fails (closes: #212661) * Updated ja.po (thanks Kenshi Muto ) * Updated es.po (thanks Javi Castelo ) * Correct Depends for libclamav1-dev (closes: #232961) -- Stephen Gran Mon, 16 Feb 2004 14:03:25 -0500 clamav (0.65-3) unstable; urgency=low * Give clamav-milter priority: extra, as it depends on sendmail. * Fix dependencies on libclamav1 (closes:#231785, #231930) * Fix endianness problem breaking md5sum verification for freshclam (closes: #23186, #231772, #231778) * Build-Depend on correct version of autoconf (closes: #231931) * cut-n-paste error fixed in clamav-milter.init (closes: #231878) -- Stephen Gran Mon, 9 Feb 2004 14:08:09 -0500 clamav (0.65-2) unstable; urgency=low * Run autoreconf in source directory - Hopefully fix FTBFS on several arches. Also B-D on automake/conf as fallback. -- Stephen Gran Sat, 7 Feb 2004 19:03:52 -0500 clamav (0.65-1) unstable; urgency=low * New Upstream Version (closes: #220792) - max-recursion level problem fixed (closes: #215306) - Support for digitally signed databases (closes: #165246) - Better stale socket detection and removal (closes: #207922) - Better zip file handling (closes: #219073, #223923) - Fixes format string vulnerability (closes: #221854) - Should no longer hang (closes: #222327, #213598) - Should no longer dump core (closes: #225356) - Can run as non-root user, although will have to be explicitly configured to do so (closes: #200525) - Handles RAR archives better, now uses internal rar unpacker. RAR code disabled by default. (closes: #223022) - Handles maildirs now (closes: #209084) - clamav-milter debug option (-x) now apparently does something, according to sources. (closes: #217155) tlamy: * Updated clamav to CVS 20040119 * Applied upstream mbox.c fixes as of CVS 20040124 * Updated documentation * Added Config-Option "Interface" to get rid of freshclam-handle-daemon.conf * freshclam-handle-daemon is split up into /etc/init.d/clamav-freshclam and if-up/down.d scripts * manpage for new freshclam.conf * debconf support for new options in freshclam.conf * fix SEGV on incomplete Content-type specifications (like in "text/") (forwarded upstream) * fix possible infinite loop in BinHex decoding, causing DoS (forwarded upstream) * use autoheader and "clamav-config.h" for build defines (forwarded upstream) sgran: * Make clamav-freshclam-handledaemon a properly named init script and not a symlink(closes: #212648) * clamav-freshclam logrotate output sent to /dev/null (closes: #222565, #230658) * Fixed clamav-freshclam.postinst error (closes: #223018, #212052) * Removed extra call to dh_install (closes: #217746) * Added clamav-milter init script (closes: #204340) * Fix up clamav-daemon init script. - Checks for and removes pidfile and socket on restart, and sleeps to give clam a chance to restart gracefully (closes: #214278, #219801) * Cosmetic fix for clamav-freshclam init script (closes: #222740) * Added /var/run/clamav for all pid and socket files (closes: #219182) * freshclam init.d script now checks if if-up.d method is being used, and exits if network is down (closes: #214608) -- Stephen Gran Sat, 7 Feb 2004 13:29:57 -0500 clamav (0.60-10) unstable; urgency=high * Updated libclamav to CVS 20030916 * Fixes at least some mbox problems (closes:Bug#211442) * Updated french translation patch from Christian Perrier * README.Debian Clarified how debconf handles mixing dpkg-reconfigure and manual editing (closes:Bug#210908) Warnings about unstable mbox code in (also in debconf templates and manpages) -- Magnus Ekdahl Sat, 20 Sep 2003 00:31:38 +0200 clamav (0.60-9) unstable; urgency=high * Updated libclamav fixes to CVS 20030905 (closes:Bug#208822) (closes:Bug#206562) * Reformulated template to avoid illegal template field (closes:Bug#208656) * Patch from Adam D. Barratt Fixing another incorrect reference (closes:Bug#208667) * Cleaned templates from debconf frontend-dependent text (closes:Bug#209026) * Added warning for the fact that freshclam doesn't check the gpg signature on the database. (closes:Bug#209027) * Made clamav-freshclam-handledaemon mimic init scripts when needed and updated manpage (closes:Bug#208818) * Added logrotate ability to clamav-freshclam and clamav-daemon (closes:Bug#208819) Logrotate deprecates the LogFileMaxSize debconf handling * New libclamav1 description (closes:Bug#210100) * Purging more files (hopefully all now) * Made clamav-daemon autoconfigured during install (Idea by Tore Anderson) -- Magnus Ekdahl Thu, 11 Sep 2003 11:25:43 +0200 clamav (0.60-8) unstable; urgency=medium * Patch from Adam D. Barratt Fixing incorrect references (closes:Bug#208517) (closes:Bug#208519) (closes:Bug#208520) * Corrected a souring bug in clamav-freshclam-handledaemon -- Magnus Ekdahl Wed, 3 Sep 2003 13:10:57 +0200 clamav (0.60-7) unstable; urgency=medium * Based on 0.60+bugfixes in 20030829 snapshot Holding back mbox fixes for this package (introducing new bugs) * Patch from Jerome BENOIT: handling running freshclam as daemon (closes:Bug#206706) (closes:Bug#198652) * Patch from Christian Perrier support for different languages in packaging text (closes:Bug#205820) french translation (closes:Bug#206773) updated Brazilian translation (closes:Bug#187777) fixed wrong default in clamav-daemon.templates (closes:Bug#206706) * Implemented Colin Watson's backport friendly translation extensions * Fixed careless handling of configure files that can be removed by user (closes:Bug#205426) * Improved the default /etc/clamav.conf for the case when user doesn't configure using debconf * Added even more docs to the templates, to avoid pink finger injuries (for more info see bug 206373) * Added debconf proxy support to clamav-freshclam (closes:Bug#205124) * Wrote manpages for new files -- Magnus Ekdahl Mon, 1 Sep 2003 19:21:35 +0200 clamav (0.60-6) unstable; urgency=high * Patches from Tomasz Papszun * Fixing a mbox problem * Spelling in changelog -- Magnus Ekdahl Tue, 12 Aug 2003 09:58:19 +0200 clamav (0.60-5) unstable; urgency=medium * Based on 0.60+bugfixes in 20030806 snapshot * Patch from Jean Charles Delepine depending on the correct version of ucf (closes:Bug#202417) (closes:Bug#203444) * Brought configuration management up to debian standards Corrected a significant number of debconf priorities (closes:Bug#197264) Added SelfCheck question Updated documentation * Patch from Timshel Knoll fixing bashism in init file -- Magnus Ekdahl Thu, 7 Aug 2003 20:52:55 +0200 clamav (0.60-4) unstable; urgency=high * Based on 0.60+bugfixes in 20030720 snapshot * Patch by Jonas Smedegaard realizing bashism in initfile + adding correct options to start-stop-daemon (closes:Bug#202175) * Patch from Chris Butler unconfusing upgrading notes (closes:Bug#202266) -- Magnus Ekdahl Mon, 21 Jul 2003 18:34:10 +0200 clamav (0.60-3) unstable; urgency=high * Based on 20030719 snapshot. However new code (not fixing bugs) in freshclam removed. Fixes many problems including (closes: Bug#201812). * Corrected permissions on LogFile (closes: Bug#200527) * Removed --notify-daemon option from cron-script (closes:Bug#198758) * Implemented ucf purging * Included most of the upstream clamav description in package description for clamav-base * Make sure that daemon not tries to start if /etc/clamav.conf contain Example * PidFile bug in initscript fixed -- Magnus Ekdahl Sun, 20 Jul 2003 10:22:55 +0200 clamav (0.60-2) unstable; urgency=high * Corrected permissions on PidFile (closes: Bug#200527) * Patch from Tomasz Papszun making freshclam run as clamav from cron (closes: Bug#200508) * Debconf now respects manual clamav.conf changes * Improved pidfile handling in init script (problem found by Daniel E. Atencio Psille) * Downgraded dazuko-source dependency to a suggestion (closes:Bug#199823) * Spelling (closes Bug#199987) -- Magnus Ekdahl Thu, 10 Jul 2003 00:35:44 +0200 clamav (0.60-1) unstable; urgency=high * New upstream release (closes:Bug#198366) Includes bzip2 support (closes:Bug#171665) Includes syslog support (closes:Bug#190699) Fixes CONTSCAN command in daemon (closes:Bug#194696) 0.61-1 contains no source differences compared to upstream release * Updated docs * New package: clamav-milter * Updated copyright statement * Lowered debhelper dependency to >=4 (reported by Jefferson Cowart) * Started usability upgrade of debconf scripts Included configuration handling for new daemon options Implemented backing functionality Replacing defaults with defaults conditioned on answer to previous questions. The expected number of questions has been lowered. -- Magnus Ekdahl Mon, 23 Jun 2003 00:05:36 +0200 clamav (0.54-11) unstable; urgency=high * patch from Brian May fixing typo in debian/rules (closes: Bug#193373) * clamav-freshclam depends on cron (closes:Bug#196902) * --daemon-notify added to cron script (closes:Bug#194013) * important updates from development snapshot newest freshclam with mirror support (closes:Bug#185043) zzlib security fix -- Magnus Ekdahl Thu, 12 Jun 2003 22:42:04 +0200 clamav (0.54-10) unstable; urgency=low * Splitting patch from Marc Haber, (closes:Bug#190176), new packages: clamav-base clamav-freshclam * replaced zoo with unzoo (closes: Bug#187927) * Changed section of development library * added watch file * downgrading debconf dependency, allowing stable backports * cleaned docs -- Magnus Ekdahl Wed, 7 May 2003 20:19:26 +0200 clamav (0.54-9) unstable; urgency=low * corrected UNIX socket permissions (closes:Bug#191286) -- Magnus Ekdahl Tue, 6 May 2003 20:41:15 +0200 clamav (0.54-8) unstable; urgency=high * pulled enough *printf and daemonize() changes from upstream snapshot to avoid printing to closed stderr (closes:Bug#190143) * delayed writing to pidfile until after fork (daemon). -- Magnus Ekdahl Thu, 24 Apr 2003 20:27:45 +0200 clamav (0.54-7) unstable; urgency=low * fixed binary-indep/arch build rules (closes: Bug#186616) -- Magnus Ekdahl Sat, 29 Mar 2003 16:28:19 +0100 clamav (0.54-6) unstable; urgency=low * changed arch any->all for clamav-testfiles (closes: Bug#184733) * added (deprecated) unarj option to keep qmail compability (closes: Bug#184840) -- Magnus Ekdahl Sun, 16 Mar 2003 17:26:31 +0100 clamav (0.54-5) unstable; urgency=high * fixed permission on /var/lib/clamav (closes: Bug#184433) * included security fix posted on clamav-users mailing list -- Magnus Ekdahl Wed, 12 Mar 2003 22:07:04 +0100 clamav (0.54-4) unstable; urgency=low * added documentation concerning the database location (closes: Bug#183821) -- Magnus Ekdahl Sat, 8 Mar 2003 10:46:07 +0100 clamav (0.54-3) unstable; urgency=low * updated virus database, including removal of bad Chemnitz signature (closes: Bug#181500) * replaced unarj with arj (closes: Bug#182283) * moved database to /usr. Soft links remain under /var (closes: Bug:#181204) -- Magnus Ekdahl Mon, 3 Mar 2003 20:16:22 +0100 clamav (0.54-2) unstable; urgency=low * replaced close with dup2 in conjunction with -i option (closes: Bug#173376) * fixed missing build dependency (closes: Bug#170113) * updated virus database -- Magnus Ekdahl Fri, 24 Jan 2003 17:25:24 +0100 clamav (0.54-1) unstable; urgency=low * new upstream version -- Magnus Ekdahl Thu, 21 Nov 2002 20:08:18 +0100 clamav (0.53-1) unstable; urgency=low * new upstream version * added default localsocket (closes: Bug:#168302) -- Magnus Ekdahl Sat, 9 Nov 2002 21:18:14 +0100 clamav (0.51-2) unstable; urgency=low * patch from Martin Lesser * correct http-proxy code (closes: Bug#165141) * clamav-daemon. postinst and configure now traps db_* error codes using || true, which makes dpkg-preconfigure & co work (closes: Bug#165121) * rewrote the pidfile patch so its less intrusive * the daemon won't try to run as clamav until the FHS issues are resolved -- Magnus Ekdahl Thu, 17 Oct 2002 20:01:57 +0200 clamav (0.51-1) unstable; urgency=low * new upstream version (closes: Bug#163406) (closes: Bug#155485) * patch from Marc Haber (closes: Bug#161916) * properly clean up latex files during debian/rules clean * make clamav build correctly with cvs-buildpackage * new build system/rules file * splitted package, new packages: libclamav1, libclamav1-dev, clamd * removed oav-support since upstream doesn't support it anymore * trashscan isn't even included in upstream anymore (closes: Bug#161202) * updated and splitted documentation * added clamd templates/config * clamd is a system command (clamd.1 -> clamd.8, /usr/bin -> /usr/sbin) * removed troublesome hardlink in docs/html/ * updated docs again after upstream release 0.51 * Made the daemon write pidfile to /var/run before releasing root rights * patch from Ola Lundqvist (closes: Bug#164290) * option --system to addgroup + delete the group in postrm * close fd 3 in clamd * made clamd more understanding for extra whitespaces in clamav.conf * clamav-daemon.config now prompts users for a correct value when they enter non-numerical values for numerical questions -- Magnus Ekdahl Sat, 12 Oct 2002 16:15:50 +0200 clamav (0.24-3) unstable; urgency=low * added modified freshclam that should play nicely with oav-update. * added trashscan explanation in README.Debian -- Magnus Ekdahl Tue, 17 Sep 2002 20:35:00 +0200 clamav (0.24-2) unstable; urgency=low * added support for custom database directories (by request from Marc Haber) after discussing integration with upstream (Tomasz) -- Magnus Ekdahl Wed, 28 Aug 2002 15:12:23 +0200 clamav (0.24-1) unstable; urgency=low * new upstream version 0.24 -- Magnus Ekdahl Fri, 23 Aug 2002 15:52:24 +0200 clamav (0.23-4) unstable; urgency=low * added missing Buildepend on tetex-extra (closes: Bug#156367) -- Magnus Ekdahl Mon, 12 Aug 2002 11:12:34 +0200 clamav (0.23-3) unstable; urgency=low * clamscan doesn't work with unrar v2.71, added versioned dependency (closes: Bug#156059) * fixed error in control description (bz2 isn't supported for now) -- Magnus Ekdahl Fri, 9 Aug 2002 16:31:21 +0200 clamav (0.23-2) unstable; urgency=low * added .gz support * added bunzip2 support * fixed linewrapping in description (closes: Bug#155507) * Upstream are reworking the archive support part. Removed .gz/.bz2 support, if you're really in a hurry the patch is available in the source as debian/GzBz2Support.diff. Upstream version will be fixed in 0.30. * fixed Builddepends (closes: Bug#155722) -- Magnus Ekdahl Thu, 8 Aug 2002 09:58:45 +0200 clamav (0.23-1) unstable; urgency=low * now has upstreams names of debian docs * fixed lintian warning (Matthew Grant) * cleaned up debian/ (Matthew Grant) * new upstream version 0.23 -- Magnus Ekdahl Tue, 30 Jul 2002 11:06:23 +0200 clamav (0.22-1) unstable; urgency=low * added debconf template handling old freshclam cron entries (closes: Bug#154117) * added support for debian package scanning. * removed/replaced more generic docs with debian specific versions (closes: Bug#153789) * added sigtool * new upstream version 0.22 -- Magnus Ekdahl Wed, 24 Jul 2002 10:50:19 +0200 clamav (0.20-2) unstable; urgency=low * new upstream version 0.20 -- Magnus Ekdahl Mon, 15 Jul 2002 11:25:44 +0200 clamav (0.15-2) unstable; urgency=low * accepted changes from Matthew Grant (thank you Matthew). * Removed freshclam specific parts from description. * Removed Suggest/ Recommend on essential packages (Policy 2.3.4). * converted non-essential commands from postrm to essential (Policy 7.2). * fixed CPU autodetection (closes: Bug#149552) * added missing depends,recommends and suggestions (closes: Bug#151421) * Removed unneccesary docs (closes: Bug#151420) * Added extra check on detectCPU after mail from Tomasz (upstream). -- Magnus Ekdahl Sun, 30 Jun 2002 16:36:15 +0200 clamav (0.15-1.mag.3) unstable; urgency=low * Added missing Recommends and Suggests fields to control file. -- Matthew Grant Mon, 24 Jun 2002 23:17:45 +1200 clamav (0.15-1.mag.2) unstable; urgency=low * Removed cruft from package diff by going back to original tarball. Checked files that had been changed with "zcat *.diff.gz | fgrep '+++' ". None found apart from unneeded business in clamscan/Makefile.am and freshclam/Makefile.am and running automake to change where viruses.db lives. This is now set up by defining pkgdatadir when making clamscan in debian/rules. -- Matthew Grant Mon, 24 Jun 2002 22:28:52 +1200 clamav (0.15-1.mag.1) unstable; urgency=low * Removed freshclam and associated files, and cron support * Changed viruses.db path to /var/lib/oav-virussignatures/viruses.db * Cleaned up debian directory - there was a lot of unnecessary cruft - extra dir files etc. * Moved DMS documentation copying from rules into docs file * Added missing prerm script for debhelper documentation symlink removal as given in manpage for dh_installdocs * Removed preinst script as user is preferred to be added in postinst as per Policy Manual Section 11.9 * Replaced most of the maintainer scripts as they tended to ignore all arguments * Made deluser happen on purge and not remove in postrm as in gdm and pidentd packages. Of course first tested for existence in passwd and group files. This is OK as by default no data is left behind when the package is purged (consider when you purge a Web server - you want the pages probably). * Fixed addition of clamav user so that in 'postinst configure' it tests before adding the user, and take care that all the /etc/passwd fields are set securely. * Made postinst script re-add clamav group just in case it is removed. * Removed dependency on cron. * Added dependency on oav-virussignatures pseudo-package. -- Matthew Grant Mon, 24 Jun 2002 13:46:52 +1200 clamav (0.15-1) unstable; urgency=low * adapted to upstream version 0.15 (closes: Bug#149957) -- Magnus Ekdahl Fri, 14 Jun 2002 14:41:40 +0200 clamav (0.14-2) unstable; urgency=low * Fixed confusing output from postinst script (closes: Bug#149552) -- Magnus Ekdahl Mon, 10 Jun 2002 21:01:50 +0200 clamav (0.14-1) unstable; urgency=low * adapted to upstreams clamav v 0.14 * made cron script use the clamav user -- Magnus Ekdahl Fri, 31 May 2002 19:59:53 +0200 clamav (0.13-3) unstable; urgency=low * fixed wrong path references caused by previous fix (closes: Bug#148427) -- Magnus Ekdahl Wed, 29 May 2002 10:43:01 +0200 clamav (0.13-2) unstable; urgency=low * moved the virus database to /var/lib/clamav (closes: Bug#148367) -- Magnus Ekdahl Tue, 28 May 2002 15:36:46 +0200 clamav (0.13-1) unstable; urgency=low * Adapted debian package to new upstream version -- Magnus Ekdahl Sat, 25 May 2002 18:45:07 +0200 clamav (0.12-1) unstable; urgency=low * fixed permissions on log file -- Magnus Ekdahl Wed, 22 May 2002 21:32:23 +0200 clamav (0.11-1) unstable; urgency=low * Initial Release. Closes: #146283 -- Magnus Ekdahl Thu, 9 May 2002 11:06:00 +0200