dolfin (2019.2.0~legacy20240219.1c52e83-10) unstable; urgency=medium * debian patch install_cmake_devfiles_in_libdir.patch uses DOLFIN_CMAKE_INSTALL_DIR as destination dir for installed cmake dev files. Set to lib/**/cmake/dolfin instead of share/dolfin/cmake since references to libmpi now depend on architecture (openmpi on 64-bit, mpich on 32-bit systems). i.e. provide cmake files in libdolfin-dev not libdolfin-dev-common. libdolfin64-dev Depends: libdolfin-dev (for cmake files). Closes: #1076272. -- Drew Parsons Sat, 13 Jul 2024 20:36:43 +0200 dolfin (2019.2.0~legacy20240219.1c52e83-9) unstable; urgency=medium * Add pylit_re_raw_strings.patch: - patches every call of re.compile and re.search in utils/pylit/pylit.py to use raw strings instead of normal strings - required to avoid triggering warnings utils/pylit/pylit.py:479: SyntaxWarning: invalid escape sequence '\.' utils/pylit/pylit.py:1592: SyntaxWarning: invalid escape sequence '\s' to stderr on CI * Squash two trailing white spaces in changelog -- Francesco Ballarin Tue, 02 Jul 2024 06:10:05 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-8) unstable; urgency=medium * Add cflags_soabi_in_jit_signature.patch: - make sure to include CFLAGS and SOABI from sysconfig.get_config_var in signature used by jit - inspired by https://github.com/FEniCS/ffcx/pull/527/files * Improved python version reporting in autopkgtests: found three places at which the python version was not being printed * Run autopkgtest python tests only against the default python version on archs where CI is too slow (armel, riscv64) -- Francesco Ballarin Sun, 30 Jun 2024 19:14:53 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-7) unstable; urgency=medium * Test unit tests and demos against all installed python versions while running autopkgtest * Add test_timer_big_int.patch: - drop using 1e32 in python/test/unit/common/test_timer.py, which would need to be written as 10**32 in python 3.12 - use instead sys.maxsize, since the only goal of the provided number is to generate a random number -- Francesco Ballarin Sat, 29 Jun 2024 07:56:52 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-6) unstable; urgency=medium * Require pusimp >= 0.1.1 * Update pusimp.patch: - compatibility with pusimp 0.1.1 - pin pip-installed numpy to <2.0 until debian ships numpy 2.0 too, otherwise numpy 2.0 would break binary compatibility in petsc4py and slepc4py. -- Francesco Ballarin Sat, 22 Jun 2024 12:07:54 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-5) unstable; urgency=medium * Skip test-dolfin-python-pusimp on riscv64 because of timeout. -- Francesco Ballarin Wed, 29 May 2024 08:51:05 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-4) unstable; urgency=medium * Skip unit tests related to mesh entities on riscv64 too. -- Francesco Ballarin Mon, 27 May 2024 13:15:20 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-3) unstable; urgency=medium * debian/tests: skip more python tests and demos on riscv64 * Standards-Version: 4.7.0 -- Drew Parsons Sun, 19 May 2024 19:12:08 +0200 dolfin (2019.2.0~legacy20240219.1c52e83-2exp3) experimental; urgency=medium * Rename libraries for 64-bit time_t transition. Thanks to Michael Hudson-Doyle for providing the patch. Closes: #1062405. * Change version tweak number from 13 to 1364 in debian/patches/gcc13.patch as a reminder that both gcc13 patch has been applied and also t64 transition has occurred. * riscv64 debci fails due to time out: remove the top 20 slowest unit test as measured on amd64 (cannot use time measurements on riscv64, because the test session is killed before durations are printed out). * Replace gcc13.patch with t64.patch to avoid having to append two version tweak numbers 13 and 64. * Replace gcc13t64 with t64 in debian control and rules files. -- Francesco Ballarin Sat, 11 May 2024 15:01:53 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-2exp2) experimental; urgency=medium * python3-dolfin Depends on python3-pusimp * Refresh debian/patches/pusimp.patch to skip tests that require downloading from pypi.org if internet is not available * Run pusimp integration tests against all available python versions in autopkgtest * Add a section to README.Debian to motivate internet availability for pusimp integration tests -- Francesco Ballarin Thu, 09 May 2024 09:27:42 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-2exp1) experimental; urgency=medium * Require python3-pusimp and add pusimp.patch * Add test file for usage of python3-pusimp * Add Francesco Ballarin to uploaders * Replace pkg-config with pkgconf in Depends * Replace pkg-config with pkgconf in Build-Depends * Add debian/patches/mixed_solvers_without_petsc.patch to guard mixed solver against using PETSc if it is not available. In such a case the solver will raise an error. -- Francesco Ballarin Sun, 21 Apr 2024 15:38:03 +0000 dolfin (2019.2.0~legacy20240219.1c52e83-1) unstable; urgency=medium * New upstream snapshot - provides significant updates to mixed dimensional (MeshView) functionality, see https://fenicsproject.discourse.group/t/ critical-meshview-updates-for-legacy-dolfin/13662 -- Drew Parsons Mon, 19 Feb 2024 18:51:22 +0100 dolfin (2019.2.0~legacy20240118.982f376-1) unstable; urgency=medium * New upstream snapshot on 2024-01-18, up to commit 982f376 * Refer to discourse forum instead of google groups in README and error messages * catch_SIGSTKSZ_libc6_2.34.patch has been contributed upstream in commit 9720c * docstring_not_byte.patch has been contributed upstream in commit 982f376 * Part of gcc13.patch has been contributed upstream in commit d56b1b0 -- Francesco Ballarin Fri, 19 Jan 2024 18:21:04 +0000 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-8) unstable; urgency=medium * update debian patch test_timing_precision.patch to apply timing resolution uncertainty to all tests in test_timing.py -- Drew Parsons Thu, 04 Jan 2024 02:10:00 +0100 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-7) unstable; urgency=medium * debian patch test_dof_to_vertex_map_PETScVector.patch uses PETScVector data (as numpy array) to test use of dof_to_vertex_map in MPI tests. Otherwise with PETSc 3.19 the PETScVector is in the "wrong state". See upstream Issue #1140. -- Drew Parsons Wed, 03 Jan 2024 04:46:22 +0100 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-6) unstable; urgency=medium * add debian patch test_timing_precision.patch to allow for more uncertainty in timing resolution. Degradation of resolution might have been introduced by boost 1.83. cf. https://github.com/FEniCS/dolfinx/issues/2946 -- Drew Parsons Tue, 02 Jan 2024 16:48:56 +0100 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-5) unstable; urgency=medium [ Francesco Ballarin ] * Add snes_set_from_options_with_empty_matrix.patch: adapt test_snes_set_from_options to PETSc >= 3.19. Closes: #1042000. * Add deprecated-petsc-3.15.patch: avoid using KSPMonitorTrueResidualNorm (deprecated since PETSc 3.15). * Add deprecated-petsc-3.17.patch: avoid using TaoSetHessianRoutine, TaoSetInitialVector, and TaoSetObjectiveAndGradientRoutine (deprecated since PETSc 3.17). [ Drew Parsons ] * after dh_clean remove generated build files. Closes: #1044418. -- Drew Parsons Mon, 18 Dec 2023 01:54:17 +0100 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-4) unstable; urgency=medium * source-only upload to migrate to testing -- Drew Parsons Wed, 09 Aug 2023 17:17:45 +0200 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-3) unstable; urgency=medium * gcc-13 patches alter the ABI, so add gcc13 suffix to sonames. Closes: #1041705. -- Drew Parsons Mon, 24 Jul 2023 20:41:21 +0200 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-2) unstable; urgency=medium * debian patch gcc13.patch enables build with gcc-13 - apply dolfinx PR#2646 to use int instead of std::int32_t in timing.h - elsewhere #include to define std::int32_t - Closes: #1037622 -- Drew Parsons Thu, 20 Jul 2023 19:58:06 +0200 dolfin (2019.2.0~legacy20230609.8b85e9d.ar-1) unstable; urgency=medium * snapshot of upstream ufl_legacy branch - source tarball generated with git archive to catch git-lfs files - applies debian ufl_legacy renaming patches * document use of ufl_legacy in debian/NEWS and in README.Debian. Install README.Debian in libdolfin-dev, python3-dolfin, dolfin-doc. * debian patch docstring_not_byte.patch fixes docstring. The byte string broke pytest 7.3 (PYTEST_DONT_REWRITE). Thanks Timo Röhling. Closes: #1038883. -- Drew Parsons Sun, 25 Jun 2023 13:24:37 +0200 dolfin (2019.2.0~git20230116.bd54183-3) experimental; urgency=medium * UFL 2023.1 has diverged and breaks dolfin. debian patches rename_ufl_legacy.patch, test_ufl_legacy.patch and demo_ufl_legacy.patch rename ufl as ufl_legacy providing the last compatible UFL 2022.2. Depends: python3-ufl-legacy. Build-Depends: python3-ffc (>= 2019.2.0~git20210714.a20cbe7-4~), python3-ufl-legacy (>= 1:2022.2.0-3~) -- Drew Parsons Wed, 26 Apr 2023 18:21:52 +0200 dolfin (2019.2.0~git20230116.bd54183-2) unstable; urgency=medium * debian/tests: armhf debci started running out of disk space compiling some forms, so skip test_form, test_evaluate_dofs_manifolds_affine, test_butcher_schemes_vector[ForwardEuler-True] -- Drew Parsons Sun, 26 Feb 2023 11:33:10 +0100 dolfin (2019.2.0~git20230116.bd54183-1) unstable; urgency=medium * New upstream snapshot - provides fixes for mixed-dimensional -- Drew Parsons Wed, 15 Feb 2023 16:51:16 +0100 dolfin (2019.2.0~git20221205.588d3ac-2) unstable; urgency=medium * add debian patches - matplotlib3.6.patch uses plt.axes directly to access 3D axes. gca() no longer takes arguments in matplotlib 3.6, only handles 2D plots. Also fixes 3D quiver plots. Closes: #1027170. - debian_version_id.patch sets git_commit_hash to DEBIAN_VERSION_ID (os ID from /etc/os-release with debian version) rather than leaving as "unknown" (since built from tarball source not git source). - update test_float128.patch to use float,int,long instead of deprecated (removed) numpy.float,numpy.int,numpy.long. Replace deprecated np.[u]int0 with np.[u]intp. Closes: #1027190. * Standards-Version: 4.6.2 -- Drew Parsons Fri, 06 Jan 2023 16:25:49 +0100 dolfin (2019.2.0~git20221205.588d3ac-1) unstable; urgency=medium * New upstream snapshot - applies debian patches fix_ftbfs.patch and test_import_ufl_2022.patch * debian/tests: specify bash shell in cpp tests to ensure the echo -e flag is available (to enable backslash escapes) -- Drew Parsons Fri, 09 Dec 2022 01:16:45 +0100 dolfin (2019.2.0~git20220407.d29e24d-8) unstable; urgency=medium * debian/tests: reorganise python unit tests to be skipped using shell arrays. Helps ensure armel skips test_mixed_assembly_rank0 Likewise organise skipped python demos using shell arrays. -- Drew Parsons Sun, 11 Sep 2022 11:43:00 +0200 dolfin (2019.2.0~git20220407.d29e24d-7) unstable; urgency=medium * debian/tests: add armel to the list of arches skipping test_mixed_assembly_rank0 in python unit tests -- Drew Parsons Sat, 10 Sep 2022 10:32:35 +0200 dolfin (2019.2.0~git20220407.d29e24d-6) unstable; urgency=medium * remove debian/tmp64 when running dh_auto_clean * debian/tests: skip demo_matnest on s390x -- Drew Parsons Wed, 07 Sep 2022 00:04:12 +0200 dolfin (2019.2.0~git20220407.d29e24d-5) unstable; urgency=medium * skip demo_mixed-poisson_mpi in build-time tests * debian patch test_import_ufl_2022.patch applies explicit ufl imports to .ufl files in order to work with ufl 2022.1.0 * Standards-Version: 4.6.1 -- Drew Parsons Sat, 11 Jun 2022 20:18:26 +0200 dolfin (2019.2.0~git20220407.d29e24d-4) unstable; urgency=medium * drop more flaky tests and demos -- Drew Parsons Mon, 18 Apr 2022 10:09:55 +0200 dolfin (2019.2.0~git20220407.d29e24d-3) unstable; urgency=medium * provide LD_LIBRARY_PATH to libdolfin.so when building python docs * Build-Depends: python3-pkgconfig and set PKG_CONFIG_PATH when building python docs -- Drew Parsons Sun, 17 Apr 2022 17:32:56 +0200 dolfin (2019.2.0~git20220407.d29e24d-2) unstable; urgency=medium * list dependencies for building docs under Build-Depends-Indep: python3-sphinx-rtd-theme, doxygen, graphviz * provide PYTHONPATH to newly built python module when building python docs * skip python unit test test_mixed_assembly_rank0 on i386, s390x -- Drew Parsons Sun, 17 Apr 2022 10:39:44 +0200 dolfin (2019.2.0~git20220407.d29e24d-1) unstable; urgency=medium * New upstream snapshot - adds Cécile Daversin-Catty's mixed-dimensional functionality * skip MPI demo tests in debian/tests which occasionally suffer race conditions in the test environment: block-assembly-2D2D, meshview-2D2D, meshview-3D1D -- Drew Parsons Thu, 14 Apr 2022 23:55:55 +0200 dolfin (2019.2.0~git20210928.3eacdb4-4) unstable; urgency=medium * skip test_function.py, test_function_assigner.py, and test_mesh.py test_shared_entities[shared_vertex-mesh_factory8] in MPI python unit tests (debian/tests for autopkgtest). Closes: #1008225. -- Drew Parsons Sun, 03 Apr 2022 15:48:51 +0200 dolfin (2019.2.0~git20210928.3eacdb4-3) unstable; urgency=medium * debian patch catch_SIGSTKSZ_libc6_2.34.patch patches catch.hpp setting sigStackSize to 32768 if using libc6 2.34 or later, where SIGSTKSZ is no longer an integer (already fixed in catch2, but this is vendored catch1). Adapted from catch2 upstream PR#2317, moderated by catch2 upstream commit c0d0a50b. Closes: #993516. * debian patch docs_local_mathjax.patch configures docs to build with local mathjax script. -- Drew Parsons Sat, 05 Feb 2022 11:14:50 +0100 dolfin (2019.2.0~git20210928.3eacdb4-2) unstable; urgency=medium * skip failing serial tests on hppa -- Drew Parsons Sun, 24 Oct 2021 15:37:25 +0200 dolfin (2019.2.0~git20210928.3eacdb4-1) unstable; urgency=medium * New upstream snapshot. - drop upper-versioned dependency on ufl (python3-ufl) * place INSTALLATION_BUILDDIR{_64} definitions before rules, to be used by override_dh_auto_clean * remove deprecated dolfin_utils entries from debian/copyright * Standards-Version: 4.6.0 -- Drew Parsons Sat, 23 Oct 2021 11:33:15 +0200 dolfin (2019.2.0~git20201207.b495043-5) unstable; urgency=medium * use triple-slash (file:///) for mathjax local url replacement to make docs for demos properly legible. -- Drew Parsons Wed, 09 Jun 2021 13:23:16 +0200 dolfin (2019.2.0~git20201207.b495043-4) unstable; urgency=medium * debian/tests: add ppc64el to the list of arches skipping some tests * update test_relax_tolerance.patch to relax more tolerances in multimesh/test_volume.py for ppc64el. -- Drew Parsons Fri, 29 Jan 2021 17:09:57 +0100 dolfin (2019.2.0~git20201207.b495043-3) unstable; urgency=medium * skip failing mesh and multimesh tests on selected non-amd64 arches (arm64, i386, s390x) * update test_relax_tolerance.patch to relax multimesh test tolerances * display timings of 20 slowest python unit tests and demos -- Drew Parsons Thu, 28 Jan 2021 11:40:28 +0100 dolfin (2019.2.0~git20201207.b495043-2) unstable; urgency=medium * add mipsel to the list of arches which fail MPI demo tests or run too slowly. * debian patch test_relax_tolerance.patch relaxes tolerance in test_incremental_assembly in unit/fem/test_system_assembler.py * apply "set -e" in debian/tests to register test failures -- Drew Parsons Wed, 27 Jan 2021 19:59:23 +0100 dolfin (2019.2.0~git20201207.b495043-1) unstable; urgency=medium * New upstream snapshot. -- Drew Parsons Mon, 25 Jan 2021 16:48:33 +0100 dolfin (2019.2.0~git20200629.946dbd3+lfs-4) unstable; urgency=medium * Team upload. * [7286d2a] Fix FTBFS. (Closes: #977222) * [47cdea3] Ignore quilt dir * [c8d8285] Remove unused patch * [8e0289b] Trim trailing whitespace. * [a251c1d] Use secure copyright file specification URI. * [c6c315f] debian/copyright: use spaces rather than tabs to start continuation lines. * [327629b] Remove unnecessary get-orig-source-target. * [615ba90] Drop transition for old debug package migration. * [d47166b] Respect CPPFLAGS -- Anton Gladky Tue, 15 Dec 2020 22:52:05 +0100 dolfin (2019.2.0~git20200629.946dbd3+lfs-3) unstable; urgency=medium * debian/tests: run C++ tests with Restrictions: allow-stderr to ignore compilation warnings (which are sent to stderr) * debian/tests: skip more python demos (iterative, block, meshview, assignment) on i386, armhf -- Drew Parsons Tue, 24 Nov 2020 03:46:18 +0800 dolfin (2019.2.0~git20200629.946dbd3+lfs-2) unstable; urgency=medium * debian/tests Depends: libblis-pthread-dev | libopenblas-pthread-dev (intention is to improve debci test times) * skip slow python demos (cahn-hilliard hyperelasticity elastodynamics navier-stokes elasticity) in debian/tests * debian patch demo_block-assembly-3D2D_relax.patch relaxes tolerance in 3D vector check. -- Drew Parsons Mon, 23 Nov 2020 02:13:28 +0800 dolfin (2019.2.0~git20200629.946dbd3+lfs-1) unstable; urgency=medium * reset against upstream source containing lfs demo files (git archive from local clone instead of bitbucket download link) - drop debian patch git-lfs_fetch_demo_meshes and remove upstream source entries from debian/source/include-binaries * debian/tests: split python unit tests from python demos * Standards-Version: 4.5.1 -- Drew Parsons Sat, 21 Nov 2020 20:29:06 +0800 dolfin (2019.2.0~git20200629.946dbd3-8) unstable; urgency=medium * [9f0767f] Fix compilation against Boost_1.74. (Closes: #974947) * Proper source-only upload with demo-files. (Closes: #975057) -- Anton Gladky Wed, 18 Nov 2020 17:09:19 +0100 dolfin (2019.2.0~git20200629.946dbd3-7) unstable; urgency=medium * Team upload. * [004980a] Revert "Fix compilation against Boost_1.74. (Closes: #975012)" -- Anton Gladky Tue, 17 Nov 2020 23:03:48 +0100 dolfin (2019.2.0~git20200629.946dbd3-6) unstable; urgency=medium * Team upload. * [9726492] Fix compilation against Boost_1.74. (Closes: #974948) -- Anton Gladky Tue, 17 Nov 2020 18:03:48 +0100 dolfin (2019.2.0~git20200629.946dbd3-5) unstable; urgency=medium * Use -flto-partition=none on mips64el. Thanks Adrian Bunk. Drop debian patch pybind11_lto_mips64el.patch. * Build-Depends: graphviz to provide dot for building docs. * Build-Depends: python3-petsc4py, python3-slepc4py to provide .pth -- Drew Parsons Sun, 15 Nov 2020 01:18:39 +0800 dolfin (2019.2.0~git20200629.946dbd3-4) unstable; urgency=medium * skip slow serial tests on armel, armhf, alpha, riscv64 * skip demo_cahn-hilliard_serial on all arches (everywhere slow) -- Drew Parsons Mon, 09 Nov 2020 12:37:51 +0800 dolfin (2019.2.0~git20200629.946dbd3-3) unstable; urgency=medium * debian patch test_float128.patch runs unit/la/test_vector.py using numpy.longdouble instead of numpy.float128 on systems (32-bit arches) which do not support numpy.float128 -- Drew Parsons Mon, 12 Oct 2020 01:08:21 +0800 dolfin (2019.2.0~git20200629.946dbd3-2) unstable; urgency=medium * python3-dolfin Depends: python3-petsc4py, python3-slepc4py (make sure base packages are available providing .pth files) -- Drew Parsons Sun, 06 Sep 2020 23:18:53 +0800 dolfin (2019.2.0~git20200629.946dbd3-1) unstable; urgency=medium * New upstream snapshot. - applies debian patch function_MeshView_f0a90b8.diff -- Drew Parsons Sun, 06 Sep 2020 00:40:10 +0800 dolfin (2019.2.0~git20200218.027d9cc-18) unstable; urgency=medium * debian patch pybind11_lto_mips64el.patch disables LTO linking with pybind11 on mips64el (applies -fno-lto when building python extensions on mips64el). -- Drew Parsons Tue, 01 Sep 2020 17:05:28 +0800 dolfin (2019.2.0~git20200218.027d9cc-17) unstable; urgency=medium * swap python3-dolfin Depends/Recommends relationships with python3-dolfin[64]-real. Make python3-dolfin primary (defaulting to standard 32-bit build) -- Drew Parsons Sun, 30 Aug 2020 23:02:47 +0800 dolfin (2019.2.0~git20200218.027d9cc-16) unstable; urgency=medium * define petsc64:Depends (PETSc/SLEPc dependencies for libdolfin64-dev) -- Drew Parsons Sat, 29 Aug 2020 20:17:07 +0800 dolfin (2019.2.0~git20200218.027d9cc-15) unstable; urgency=medium * debian patch lib_rename.patch appends DOLFIN_LIB_NAME_EXT to the dolfin library name in DOLFINConfig.cmake, to allow cmake to find libdolfin64.so (cmake -DDOLFIN_LIB_NAME_EXT=64) rather than libdolfin.so * make mathjax handling independent of version -- Drew Parsons Sat, 29 Aug 2020 14:05:11 +0800 dolfin (2019.2.0~git20200218.027d9cc-14) unstable; urgency=medium * add debian patch test_floating_point.patch to use pytest.approx to test equality of floating point numbers (in geometry/test_point.py) Needed to pass non-intel (arm64, ppc64el) tests. -- Drew Parsons Mon, 10 Aug 2020 14:52:01 +0800 dolfin (2019.2.0~git20200218.027d9cc-13) unstable; urgency=medium * disable dolfin64 tests in debian/tests (autopkgtest). They are known to fail. Reinstate once they are passing. * mark libdolfin-dev, libdolfin64-dev as Multi-Arch: same * mark libdolfin-dev-common Architecture: all and Multi-Arch: foreign * remove FindEigen3.cmake from FindMPFR.cmake entry in debian/copyright * debhelper compatibility level 13 -- Drew Parsons Sun, 09 Aug 2020 22:10:12 +0800 dolfin (2019.2.0~git20200218.027d9cc-12) unstable; urgency=medium * add mipsel to 32-bit arch list skipping some 64-bit tests, including demo_contact-vi-snes_serial, demo_sym-dirichlet-bc_serial -- Drew Parsons Mon, 20 Jul 2020 15:05:17 +0800 dolfin (2019.2.0~git20200218.027d9cc-11) experimental; urgency=medium * skip demo_contact-vi-snes_serial in 64-bit tests on armel, armhf -- Drew Parsons Sat, 18 Jul 2020 09:19:12 +0800 dolfin (2019.2.0~git20200218.027d9cc-10) experimental; urgency=medium * update list of 64-bit tests skipped on 32-bit arches: demo_mixed-poisson_serial demo_stokes-taylor-hood_serial demo_auto-adaptive-navier-stokes_serial demo_multimesh-stokes_serial -- Drew Parsons Fri, 17 Jul 2020 12:33:07 +0800 dolfin (2019.2.0~git20200218.027d9cc-9) experimental; urgency=medium * append 64-bit tests to skip on 32-bit arches, append to ARCH_SPECIFIC_SKIP_SERIAL_TEST_64 * libdolfin-dev-common Replaces and Breaks: libdolfin-dev (<< 2019.2.0~git20200218.027d9cc-7) Add corresponding versioned depends for libdolfin-dev on libdolfin-dev-common (>= 2019.2.0~git20200218.027d9cc-7) Closes: #965005. -- Drew Parsons Tue, 14 Jul 2020 23:34:19 +0800 dolfin (2019.2.0~git20200218.027d9cc-8) experimental; urgency=medium * skip 64-bit build-time tests of demo_mixed-poisson_serial demo_stokes-taylor-hood_serial demo_contact-vi-snes_serial demo_multimesh-stokes_serial on 32 bit arches (armel armhf i386 hppa m68k powerpc) -- Drew Parsons Tue, 14 Jul 2020 11:47:03 +0800 dolfin (2019.2.0~git20200218.027d9cc-7) experimental; urgency=medium * new packages libdolfin64-dev, python3-dolfin64-real provide DOLFIN built against 64-bit PETSc (64-bit indexing). Set PETSC_DIR=/usr/lib/petsc64 SLEPC_DIR=/usr/lib/slepc64 to activate. - skip 64-bit build-time serial tests demo_stokes-iterative_serial and demo_curl-curl_serial - ignore errors in 64-bit MPI tests: "PETSc function 'KSPSolve' error code: 92 (See petsc linearsolvertable.html for possible LU and Cholesky solvers) * convert python3-dolfin to a base package providing dolfin.pth that Recommends: python3-dolfin-real. PETSc-specific dolfin module is installed under the PETSC_DIR it was built against and made accessible via dolfin.pth. * add debian patches - lib_rename.patch allows LIB_NAME_EXT to be defined as a suffix to the library name, to distinguish libdolfin.so from libdolfin64.so - cmake_find_petsc.patch ensures PETSc is found before loading Dolfin cmake rules (needed to check for 64-bit build) -- Drew Parsons Tue, 07 Jul 2020 16:27:09 +0800 dolfin (2019.2.0~git20200218.027d9cc-6) unstable; urgency=medium * dolfin-doc provides HTML documentation (Python and C++ API) - include .rst files (sphinx html docs references them in "View page source" links) -- Drew Parsons Mon, 27 Apr 2020 18:27:50 +0800 dolfin (2019.2.0~git20200218.027d9cc-5) unstable; urgency=medium * include mesh files in upload: git lfs pull; patch -p1 -R Mon, 20 Apr 2020 22:07:47 +0800 dolfin (2019.2.0~git20200218.027d9cc-4) unstable; urgency=medium * upload Cécile Daversin-Catty's snapshot to unstable -- Drew Parsons Mon, 20 Apr 2020 17:46:09 +0800 dolfin (2019.2.0~git20200218.027d9cc-3) experimental; urgency=medium * Make git-lfs provide mesh files before uploading package: git lfs pull patch -p1 -R < debian/patches/git-lfs_fetch_demo_meshes -- Drew Parsons Fri, 03 Apr 2020 13:04:55 +0800 dolfin (2019.2.0~git20200218.027d9cc-2) experimental; urgency=medium * debian patch function_MeshView_f0a90b8.diff applies upstream commit f0a90b8 to fix Function restriction involving MeshView mappings. * skip demo_contact-vi-snes on sparc64 -- Drew Parsons Fri, 03 Apr 2020 02:06:42 +0800 dolfin (2019.2.0~git20200218.027d9cc-1) experimental; urgency=medium * New upstream snapshot. This is Cécile Daversin-Catty's branch, cecile/mixed-dimensional providing support for Mixed Dimensional calculations (MixedFunctionSpace). * Incidentally the preceding snapshot was actually git20200123.ac79caa (master branch) not git20200124.734bf76. -- Drew Parsons Tue, 17 Mar 2020 22:24:24 +0800 dolfin (2019.2.0~git20200124.734bf76-1) experimental; urgency=medium * New upstream snapshot. - applies debian patches revert_PETSc3.11_8e92f6ee.patch and workaround_matplotlib_broken_API.patch * Standards-Version: 4.5.0 * Get demo mesh files with git-lfs fetch, register in debian/source/include-binaries, with ascii xdmf sample file in debian/patches/git-lfs_fetch_demo_meshes -- Drew Parsons Wed, 29 Jan 2020 03:25:39 +0800 dolfin (2019.1.0-10) unstable; urgency=medium * debian patch workaround_matplotlib_broken_API.patch works around broken API in matplotlib 3.1: can no longer set axes.aspect to 'equal' in 3d. -- Drew Parsons Sat, 28 Dec 2019 08:25:16 +1100 dolfin (2019.1.0-9) unstable; urgency=medium * skip all build-time tests on mips64el. Closes: 945817. * skip some build-time MPI tests on ia64 * set MCA btl_base_warn_component_unused to 0 in also for build-time tests in debian/rules -- Drew Parsons Sun, 01 Dec 2019 23:43:12 +0800 dolfin (2019.1.0-8) unstable; urgency=medium * libdolfin-dev Depends: g++ | c++-compiler, dolfin-doc Recommends: python3-matplotlib * set MCA btl_base_warn_component_unused to 0 in debian/tests (python) to ignore complaints about missing OpenFabrics transports -- Drew Parsons Tue, 12 Nov 2019 00:49:22 +0900 dolfin (2019.1.0-7) unstable; urgency=medium * skip demo_built-in-meshes_mpi test on ia64 * relax pybind11 dependency. pybind11 follows semantic versioning, so should be backwards compatible with minor and patch version updates. * Standards-Version: 4.4.1 -- Drew Parsons Sun, 20 Oct 2019 15:27:11 +0800 dolfin (2019.1.0-6) unstable; urgency=medium * skip test demo_biharmonic_mpi on ia64 -- Drew Parsons Sat, 28 Sep 2019 16:26:12 +0800 dolfin (2019.1.0-5) unstable; urgency=medium * deactivate colour for MPI python unit tests to aid log readability * debian patch scripts_python3.patch superficially converts dolfin-order and dolfin-plot to Python3. They are deprecated and may not work anyway. Closes: #936436. -- Drew Parsons Mon, 02 Sep 2019 03:39:33 +0800 dolfin (2019.1.0-4) unstable; urgency=medium * Standards-Version: 4.4.0 * drop python-dolfin * skip the demo_bcs_mpi test on ia64 -- Drew Parsons Mon, 05 Aug 2019 09:41:17 +0800 dolfin (2019.1.0-3) experimental; urgency=medium * autopkgtest: report CPUs available (merge 2018.1.0.post1-18) -- Drew Parsons Tue, 04 Jun 2019 12:38:07 +0800 dolfin (2019.1.0-2) experimental; urgency=medium * debian/README.source: document the file format of scripts/dolfin-convert/test_exodus.exo as Exodus II (can view in paraview) * update debian/copyright (AUTHORS, io/pugi*) * merge C++ unit tests into debian/tests from 2018.1.0.post1-17 -- Drew Parsons Sat, 01 Jun 2019 12:04:49 +0800 dolfin (2019.1.0-1) experimental; urgency=medium * New upstream release (official). - applies patches: * PETSc_3.10_SNESTEST_removed.patch * conditional-parmetis-in-cholmod.patch * test_mpi_oversubscribe.patch * unittests_demos_include_dirs.patch * v2019.1.patch * debhelper 12: Build-Depends: debhelper-compat (= 12) * apply debian patch revert_PETSc3.11_8e92f6ee.patch: VecScatterCreateWithData never made it into PETSc 3.11 -- Drew Parsons Thu, 25 Apr 2019 22:43:54 +0800 dolfin (2019.1.0~git20190216+lfs-1) experimental; urgency=medium * New upstream test release. - applies pytest_fixtures_096217a.patch - demo data files pulled in from git lfs * debian patch v2019.1.patch bumps DOLFIN_VERSION to 2019.1 (needed to set soname for libdolfin.so) -- Drew Parsons Wed, 06 Mar 2019 10:40:45 +0800 dolfin (2018.1.0.post1-18) unstable; urgency=medium * debian/tests (autopkgtest): report CPUs available and used for C++ MPI demos (tracking flaky timeouts, Bug#920546) -- Drew Parsons Sat, 01 Jun 2019 13:30:35 +0800 dolfin (2018.1.0.post1-17) unstable; urgency=medium * debian/tests (autopkgtest): run C++ unit tests -- Drew Parsons Fri, 31 May 2019 23:24:20 +0800 dolfin (2018.1.0.post1-16) unstable; urgency=medium * use ctest --output-on-failure not -output-on-failure -- Drew Parsons Mon, 11 Feb 2019 19:14:25 +1100 dolfin (2018.1.0.post1-15) unstable; urgency=medium * symlink man-page for fenics-version to manpage for dolfin-version * run ctest with -output-on-failure to show details of test failures -- Drew Parsons Mon, 11 Feb 2019 13:58:33 +1100 dolfin (2018.1.0.post1-14) unstable; urgency=medium * add debian patch pytest_fixtures_096217a.patch (upstream commit 096217a0a3cb710e869d7e82a3d3609c4d968b76) to update tests for latest pytest API. * debhelper compatibility level 12 * dolfin-bin installs /usr/bin/fenics-version * usr/share/dolfin/dolfin.conf is redundant on Debian, list it in debian/not-installed * debian/rules: - skip C++ build-time tests of demo_elastodynamics_mpi (unreliable, sometimes passes, but fails with pdebuild) - override dh_dwz to ignore python module .so files (already stripped by python's setuptools) -- Drew Parsons Sat, 09 Feb 2019 18:07:21 +1100 dolfin (2018.1.0.post1-13) unstable; urgency=medium * Standards-Version: 4.3.0 * create patch PETSc_3.10_SNESTEST_removed.patch to work with PETSc 3.10 (SNESTEST has been removed). Thanks Jed Brown. -- Drew Parsons Wed, 26 Dec 2018 09:14:38 +0100 dolfin (2018.1.0.post1-12) unstable; urgency=medium * apply strict versioned depends on pybind11, python3-dolfin Depends: pybind11 (>= 2.2.4), pybind11 (<= 2.2.5) Closes: #909407. * Hardening: add dpkg-buildflags CXXFLAGS to CMAKE_CXX_FLAGS and python module build * use VERBOSE build of python modules -- Drew Parsons Mon, 24 Sep 2018 03:03:27 +0800 dolfin (2018.1.0.post1-11) unstable; urgency=medium * skip slow build-time tests (>500-1000 sec to complete) * rebuild for pybind11 2.2.4 -- Drew Parsons Sun, 23 Sep 2018 04:58:48 +0800 dolfin (2018.1.0.post1-10) unstable; urgency=medium * skip build-time tests: - demo_auto-adaptive-poisson_serial test on m68k - demo_cahn-hilliard_mpi and other MPI tests on mips - all tests on sh4 -- Drew Parsons Tue, 04 Sep 2018 03:53:23 +0800 dolfin (2018.1.0.post1-9) unstable; urgency=medium * autopkgtest: configure cpp tests with mpicc to ensure that the cmake test for PetscInt passes * Standards-Version: 4.2.1 -- Drew Parsons Mon, 03 Sep 2018 04:17:35 +0800 dolfin (2018.1.0.post1-8) unstable; urgency=medium * mark libdolfin2018.1 as Multi-Arch: same * python3-dolfin Depends: python3-six * Standards-Version: 4.2.0 -- Drew Parsons Fri, 17 Aug 2018 00:11:03 +0800 dolfin (2018.1.0.post1-7) unstable; urgency=medium * skip demo_stokes-taylor-hood_mpi test on mips64el -- Drew Parsons Wed, 01 Aug 2018 22:54:05 +0800 dolfin (2018.1.0.post1-6) unstable; urgency=medium * skip demo_cahn-hilliard_mpi, demo_ale_mpi, demo_poisson-disc_mpi tests on mipsel * skip demo_elasticity_serial test on m68k * run build-time tests on mips, but skip demo_cahn-hilliard_serial, demo_hyperelasticity_serial -- Drew Parsons Tue, 31 Jul 2018 15:16:58 +0800 dolfin (2018.1.0.post1-5) unstable; urgency=medium * update debian/test (autopkgtest) Depends * skip demo_sym-dirichlet-bc_mpi test on ppc64el * skip ALL build-time tests on mips, hurd-i386 -- Drew Parsons Sat, 28 Jul 2018 22:42:00 +0800 dolfin (2018.1.0.post1-4) unstable; urgency=medium * skip demo_bcs_mpi test on mips64el * update debian/tests/control Depends: @, @builddeps@ (to provide c++) -- Drew Parsons Fri, 27 Jul 2018 14:47:32 +0800 dolfin (2018.1.0.post1-3) unstable; urgency=medium * update skipped tests: - skip demo_navier-stokes_mpi test on arm64 - skip demo_contact-vi-tao_mpi on mips64el - skip demo_stokes-iterative_mpi on mipsel - skip all MPI tests on armhf, i386, hppa, powerpc * don't download fresh source for tests * do copy symlink contents for C++ tests (in particular, copy pulley.xdmf for demo_elasticity) * tests Depends: python3-pytest -- Drew Parsons Fri, 27 Jul 2018 02:42:56 +0800 dolfin (2018.1.0.post1-2) unstable; urgency=medium * new upstream version for unstable. Some minor API changes: - Rename `mpi_comm_world()` to `MPI.comm_world`. - Rename `ERROR`, `CRITICAL` etc. to `LogLevel.ERROR`, `LogLevel.CRITICAL`. * skip demo_curl-curl_mpi test on mips64el -- Drew Parsons Thu, 26 Jul 2018 01:19:42 +0800 dolfin (2018.1.0.post1-1exp6) experimental; urgency=medium * skip all MPI tests on ppc64el -- Drew Parsons Wed, 11 Jul 2018 10:39:00 +0800 dolfin (2018.1.0.post1-1exp5) experimental; urgency=medium * updates to debian/rules: - identify build dir using DEB_HOST_GNU_TYPE - respect the parallel flag in DEB_BUILD_OPTIONS when running tests - skip cahn-hilliard, elasticity, elastodynamics MPI build tests which fail or time out for: armel mips64el ppc64el - skip m68k MPI tests altogether (times out) * debian patch unittests_demos_include_dirs.patch ensures include directories are defined for tests without reconfiguring cmake * link elasticity/pulley.xdmf from python demo to cpp demo * allow parallel jobs (max 8) in CI test test-dolfin-cpp -- Drew Parsons Sun, 08 Jul 2018 13:14:48 +0800 dolfin (2018.1.0.post1-1exp4) experimental; urgency=medium * Enable installation CI testing with Testsuite: autopkgtest. * run build-time tests including unittests and demos - use --oversubscribe with openmpi tests - skip demo_hyperelasticity_mpi (it diverges) * enable MPI for mpich arches. LAM arches will have to manually set ENABLE_MPI=OFF in debian/rules. * configure default preference for mumps or petsc over superlu_dist, since superlu_dist is crippled by mc64, which cannot be redistributed. * Standards-Version: 4.1.5 -- Drew Parsons Fri, 06 Jul 2018 23:49:43 +0800 dolfin (2018.1.0.post1-1exp3) experimental; urgency=medium * Build-Depends: python3-all-dev (build against all python3 versions) -- Drew Parsons Thu, 28 Jun 2018 11:21:07 +0800 dolfin (2018.1.0.post1-1exp2) experimental; urgency=medium * process python demo files only for doc (arch-indep) builds -- Drew Parsons Wed, 27 Jun 2018 23:45:13 +0800 dolfin (2018.1.0.post1-1exp1) experimental; urgency=medium * New corrected upstream release. * install python demos with dolfin-doc -- Drew Parsons Wed, 27 Jun 2018 20:50:58 +0800 dolfin (2018.1.0.post0-1exp1) experimental; urgency=medium * Corrected upstream release. - includes the fenics python module. - petsc4py and other include dirs are no longer added to DOLFIN_3RD_PARTY_INCLUDE_DIRS in DOLFINConfig.cmake. Closes: #895419. * Use override_dh_auto_test instead of DEB_BUILD_OPTIONS=nocheck to skip build time tests without triggering a lintian warning. -- Drew Parsons Tue, 26 Jun 2018 01:38:04 +0800 dolfin (2018.1.0-1exp1) experimental; urgency=medium [ Nico Schlömer ] * remove Python 2 package in preparation of 2018.1 [ Drew Parsons ] * New upstream release. - python-dolfin is now a dummy package that depends on python3-dolfin. - remove debian patches applied upstream: env.patch, gnuinstalldirs.patch, use-dolfin.patch - no longer uses instant - uses pybind11 instead of SWIG * remove ancient-python-version-field X-Python3-Version: >= 3.4 * Standards-Version: 4.1.4 * Manpages for dolfin-bin scripts taken from old dolfin docs. -- Drew Parsons Fri, 15 Jun 2018 17:38:32 +0200 dolfin (2017.2.0.post0-3) unstable; urgency=medium * update petsc/slepc dependencies for PETSc/SLEPc 3.8 (dev package now libpetsc-real3.8-dev not libpetsc3.8.3-dev) -- Drew Parsons Sun, 04 Mar 2018 10:46:39 +0800 dolfin (2017.2.0.post0-2) unstable; urgency=medium * debian/control: update VCS tags to salsa.debian.org -- Drew Parsons Thu, 22 Feb 2018 08:56:02 +0800 dolfin (2017.2.0.post0-1exp2) experimental; urgency=medium * reorganise debian/copyright: collect core DOLFIN files and contributors in one entry. * Remove -dbg packages from debian/control. Debug packages (-dbgsym) are built automatically. -- Drew Parsons Fri, 16 Feb 2018 15:34:44 +0800 dolfin (2017.2.0.post0-1exp1) experimental; urgency=medium * New upstream release. - updated debian/upstream/signing-key.asc for signature from the FEniCS Project Steering Council (key BED06106DD22BAB3) - drops VTK support (no plots, but VTK files can still be created) - update versions of Build-Dependencies: cmake (>= 3.5), swig3.0 (>= 3.0.5), petsc-dev (>= 3.7), slepc-dev (>= 3.7), libboost-dev (>= 1.56), libeigen3-dev (>= 3.2.90) * Standards-Version: 4.1.3 * Update debian.patches - file encoding now included when reading files in python scripts - VTK no longer supported * debhelper compatibility level 11 * debian/control: Priority: optional not extra * FEniCS version dependencies are taken as >=2017.2 and <=2017.3~ i.e. depend on major.minor version only -- Drew Parsons Sun, 21 Jan 2018 21:21:52 +0800 dolfin (2017.1.0-4) unstable; urgency=medium * Team upload. * New upstream (new soname) version built against GCC7. Closes: #871279. * Builds against swig 3.0.12. Closes: #875395. -- Drew Parsons Tue, 12 Sep 2017 15:45:48 +0800 dolfin (2017.1.0-3) experimental; urgency=medium * Team upload. * Add debian/patches/FindPETScSLEPc.patch to test for PETSc and SLEPc at build time. The patch ensures tests link against -lmpi. Thanks Johannes Ring. -- Drew Parsons Tue, 05 Sep 2017 01:20:24 +0800 dolfin (2017.1.0-2) experimental; urgency=medium * Team upload. * Create debian patch conditional-parmetis-in-cholmod.patch to only link cholmod support with parmetis if parmetis support is enabled. Parmetis is non-free and therefore cannot routinely be supported while dolfin is in Debian main. * Standards-Version: 4.1.0 * debhelper compatibility level 10. -- Drew Parsons Mon, 28 Aug 2017 23:26:11 +0800 dolfin (2017.1.0-1) experimental; urgency=medium * New upstream release. * d/control: - Update package names (libdolfin2016.2 -> libdolfin2017.1 and libdolfin2016.2-dbg -> libdolfin2017.1-dbg). - Bump minimum required version for python-dijitso and python-ffc to 2017.1 in Build-Depends. * Move d/libdolfin2016.2.install -> d/libdolfin2017.1.install. * d/patches/python3-support.patch: removed (fixed upstream). -- Johannes Ring Fri, 07 Jul 2017 11:24:50 +0200 dolfin (2016.2.0-5) unstable; urgency=medium * libdolfin-dev depends on either the python2 or python3 version of modules (enables python3-only installation). -- Drew Parsons Thu, 06 Jul 2017 15:21:57 +0800 dolfin (2016.2.0-4) unstable; urgency=medium [ Johannes Ring ] * d/rules: - Re-generate swig interface with correct Python version before build and install. Closes: #863829. - Build for Python 2 after Python 3 by switching the order in PYVERS, since Python 2 is default. * Add patch vtk-python2-only-cmake-usefile.patch that disables the vtk section in UseDOLFIN.cmake for Python 3. Closes: #863828. * d/control: Add python-ffc to Depends for binary package libdolfin-dev (provides ufc.h). -- Drew Parsons Wed, 07 Jun 2017 12:14:40 +0800 dolfin (2016.2.0-3) unstable; urgency=medium [ Drew Parsons ] * Enable petsc/slepc dependencies on kfreebsd. Note that PETSc support in dolfin on kfreebsd is not in fact active due to linking problems during configuration tests, but dolfin builds successfully without it. Closes: #822971. [ Johannes Ring ] * Support Python 3: new packages python3-dolfin and python3-dolfin-dbg. -- Drew Parsons Tue, 30 May 2017 16:17:28 +0800 dolfin (2016.2.0-2) unstable; urgency=medium * Dolfin depends on specific 3.7.X patch releases of PETSc and SLEPc (see dolfin.pc, DOLFINConfig.cmake) -- Drew Parsons Tue, 24 Jan 2017 06:18:32 +0800 dolfin (2016.2.0-1) unstable; urgency=medium [ Drew Parsons ] * Drop HDF5 Fortran configuration (it's not actually used). * Tighten build and python-dolfin fenics dependencies to the FENiCS minor version: (>= 2016.2.0), (<< 2016.3~) [ Johannes Ring ] * New upstream release. * d/watch: Check pgp signature. * d/control: - Update package names (libdolfin2016.1 -> libdolfin2016.2 and libdolfin2016.1-dbg -> libdolfin2016.2-dbg). - Bump minimum required version for python-instant, python-ufl and python-ffc to 2016.2. - Add python-dijitso to Build-Depends and Depends for binary package python-dolfin. -- Drew Parsons Wed, 21 Dec 2016 16:47:36 +0800 dolfin (2016.1.0-5) unstable; urgency=medium * Reenable HDF5 support. * patches/HDF5-configure.patch helps configure HDF5 parallel. -- Drew Parsons Fri, 16 Sep 2016 11:16:05 +0800 dolfin (2016.1.0-4) unstable; urgency=medium * Disable HDF5 support. HDF5 was never actually enabled previously due to a discrepant configuration between serial and parallel HDF5, but that now causes dolfin to fail to build. -- Drew Parsons Wed, 14 Sep 2016 12:52:59 +0800 dolfin (2016.1.0-3) unstable; urgency=medium * Thanks Christophe Prud'homme for your uploads of the earlier versions of dolfin. Removing from the Uploaders list now. Closes: #835003. * enable parallel build (dh $@ --parallel). Closes: #833602. -- Drew Parsons Mon, 12 Sep 2016 17:19:42 +0800 dolfin (2016.1.0-2) unstable; urgency=medium * Enable build against version of PETSc (and SLEPc) provided by petsc-dev, e.g. PETSc 3.6 or 3.7. * Include support for petsc4py and slepc4py. * Update debian/watch (uscan). -- Drew Parsons Thu, 11 Aug 2016 23:08:05 +0800 dolfin (2016.1.0-1) unstable; urgency=medium [ Johannes Ring ] * New upstream release. * debian/control: - Update package names for new SONAME 2016.1 (libdolfin1.6 -> libdolfin2016.1 and libdolfin1.6-dbg -> libdolfin2016.1-dbg). - Bump minimum required version for python-instant, python-ufl and python-ffc to 2016.1. * Move debian/libdolfin1.6.install -> debian/libdolfin2016.1.install. * debian/rules: Add -fpermissive to CXX flags. -- Drew Parsons Tue, 05 Jul 2016 13:14:01 +0800 dolfin (1.6.0-5) unstable; urgency=medium * Depends: libpetsc3.6-dev rather than petsc-dev. Likewise libslepc3.6-dev. dolfin 1.6 is not compatible with petsc 3.7. -- Drew Parsons Tue, 07 Jun 2016 09:11:42 +0800 dolfin (1.6.0-4) unstable; urgency=medium [ Mattia Rizzolo ] * debian/control: + Update VCS fields after the move to Git. [ Drew Parsons ] * Remove python-dolfin dependency on python-netcdf. Closes: #821215. * Build against vtk6 not vtk5 (source and libdolfin-dev dependencies). Requires Qt4 support to be switched off (vtk6 uses Qt5). Qt support has been dropped upstream. Closes: #821875. * Activate support for SCOTCH. * Standards-Version: 3.9.8 -- Drew Parsons Tue, 26 Apr 2016 23:59:41 +0800 dolfin (1.6.0-3) unstable; urgency=medium * Team upload. * Use OPENMPI_ARCHITECTURES from mpi-default-dev instead of hardcoding architectures where not to use openmpi. -- Mattia Rizzolo Thu, 21 Apr 2016 15:33:43 +0000 dolfin (1.6.0-2) unstable; urgency=medium * Team upload. * Run wrap-and-sort -s * Switch to unversioned Build-Depends on petsc-dev and slepc-dev (also for the libdolfin-dev dependencies). -- Mattia Rizzolo Thu, 21 Apr 2016 13:32:44 +0000 dolfin (1.6.0-1) unstable; urgency=medium * New upstream release. * debian/control: - Add gfortran to build dependencies. - Update package names for new SONAME 1.6 (libdolfin1.5 -> libdolfin1.6 and libdolfin1.5-dbg -> libdolfin1.6-dbg). - Bump minimum required version for python-instant, python-ufl and python-ffc to 1.6.0. - Require swig3.0 (>= 3.0.3) in Build-Depends. * Move debian/libdolfin1.5.install -> debian/libdolfin1.6.install. * Remove patch for fixing problem with Python 2.7.10 (fixed upstream). * debian/rules: - Replace swig with swig3.0. - Set PETSC_DIR to /usr/lib/petsc and SLEPC_DIR to /usr/lib/slepc. - Explicitly disable petsc4py, slepc4py and sphinx. - Help CMake find the parallel version of hdf5. -- Johannes Ring Sat, 31 Oct 2015 13:30:16 +0800 dolfin (1.5.0-4) unstable; urgency=medium * debian/control: Enable libpetsc3.2-dev and libslepc3.2-dev on armel, arm64 and hurd-i386 (closes: #787494). * debian/rules: Enable MPI on armel. -- Johannes Ring Tue, 02 Jun 2015 12:39:45 +0200 dolfin (1.5.0-3) unstable; urgency=medium * Add patch to fix issue with Python 2.7.10 (closes: #786857). -- Johannes Ring Mon, 01 Jun 2015 09:26:07 +0200 dolfin (1.5.0-2) unstable; urgency=medium * Upload to unstable (closes: #780359). -- Johannes Ring Wed, 13 May 2015 09:48:59 +0200 dolfin (1.5.0-1) experimental; urgency=medium * New upstream release (closes: #780359). * debian/control: - Bump Standards-Version to 3.9.6 (no changes needed). - Bump X-Python-Version to >= 2.7. - Update package names for new SONAME 1.5 (libdolfin1.4 -> libdolfin1.5, libdolfin1.4-dbg -> libdolfin1.5-dbg and libdolfin1.4-dev -> libdolfin1.5-dev). - Bump minimum required version for python-instant, python-ufl and python-ffc to 1.5.0. - Add python-sympy and python-six to Depends for binary package python-dolfin. - Add dh-python to Build-Depends. - Remove libcgal-dev from {Build-}Depends. * Remove CSGCGALMeshGenerator3D-oom.patch since CGAL is no longer used by DOLFIN. * Move debian/libdolfin1.4.install -> debian/libdolfin1.5.install. * debian/rules: No longer any non DFSG-free stuff to remove, so update get-orig-source target (update debian/watch accordingly). * Update debian/copyright and debian/copyright_hints. -- Johannes Ring Tue, 17 Mar 2015 07:57:11 +0100 dolfin (1.4.0+dfsg-4) unstable; urgency=medium * debian/control: Disable libcgal-dev on i386, mipsel and sparc. * debian/rules: Remove bad directives in pkg-config file dolfin.pc (closes: #760658). * Remove debian/libdolfin-dev.lintian-overrides. -- Johannes Ring Mon, 22 Sep 2014 14:35:34 +0200 dolfin (1.4.0+dfsg-3) unstable; urgency=medium * debian/rules: Enable MPI on mips(el) and sparc (closes: #759182). * debian/control: - Disable libcgal-dev on {hurd, kfreebsd}-i386 since it requires unreasonable amounts of memory (closes: #759183). - Disable libpetsc3.4.2-dev and libslepc3.4.2-dev on amr64 since they are not available on this architecture. -- Johannes Ring Fri, 29 Aug 2014 08:28:19 +0200 dolfin (1.4.0+dfsg-2) unstable; urgency=medium * Rename libdolfin1.4-dev to libdolfin-dev and remove dolfin-dev. -- Johannes Ring Mon, 18 Aug 2014 10:21:43 +0200 dolfin (1.4.0+dfsg-1) unstable; urgency=medium * New upstream release. * debian/control: - Update package names for new SONAME 1.3 (libdolfin1.3 -> libdolfin1.4, libdolfin1.3-dbg -> libdolfin1.4-dbg and libdolfin1.3-dev -> libdolfin1.4-dev). - Bump minimum required version for python-instant, python-ufl and python-ffc to 1.4.0. - Add python-ffc (>= 1.4.0) to Build-Depends. - Replace swig2.0 with swig in Build-Depends. - Remove ufc and python-ufc from Build-Depends and from Depends for binary package libdolfin1.4-dev and python-dolfin (closes: #755727). - Add libdolfin1.3-dev in Conflicts and Replaces for binary package libdolfin1.4-dev. - Remove libarmadillo-dev from {Build-}Depends. - Remove libptscotch-dev from {Build-}Depends (closes: #741165). * Move debian/libdolfin1.3.install -> debian/libdolfin1.4.install and debian/libdolfin1.3-dev.install -> debian/libdolfin1.4-dev.install. * debian/rules: - Enable CGAL again (accidentally disabled in last upload). - No longer needed to remove .pyc files in get-orig-source target. - Add "export PERL_LWP_SSL_VERIFY_HOSTNAME=0" to get-orig-source target to help uscan download from Bitucket. * Remove patch for bug in Boost (fixed). * Add lintian override libdolfin1.4-dev: pkg-config-bad-directive. -- Johannes Ring Mon, 11 Aug 2014 09:57:36 +0200 dolfin (1.3.0+dfsg-2) unstable; urgency=medium * debian/control: - Disable libcgal-dev on armhf and mips since it requires unreasonable amounts of memory (closes: 739697). - Disable libpetsc3.4.2-dev and libslepc3.4.2-dev on hurd-i386 since they are not available on this architecture. * Add patch to workaround bug in boost (thanks to Peter Green). * Use DEB_BUILD_MULTIARCH when installing the DOLFIN library and pkg-config file. -- Johannes Ring Wed, 26 Feb 2014 12:23:11 +0100 dolfin (1.3.0+dfsg-1) unstable; urgency=medium * New upstream release. * Remove patches for PETSc/SLEPc 3.4 (no longer needed). * debian/docs: README -> README.rst and remove TODO. * debian/control: - Bump Standards-Version to 3.9.5 (no changes needed). - Add libeigen3-dev in Build-Depends and Depends for binary package libdolfin1.3-dev. - Add python-ply in Build-Depends. - Update package names for new SONAME 1.3 (libdolfin1.2 -> libdolfin1.3, libdolfin1.2-dbg -> libdolfin1.3-dbg and libdolfin1.2-dev -> libdolfin1.3-dev). - Bump minimum required version for ufc and python-ufc to 2.3.0, and for python-instant, python-ufl and python-ffc to 1.3.0. - Add libdolfin1.2-dev in Conflicts and Replaces for binary package libdolfin1.3-dev. - Add python-ply in Build-Depends. * Move debian/libdolfin1.2.install -> debian/libdolfin1.3.install and debian/libdolfin1.2-dev.install -> debian/libdolfin1.3-dev.install. * debian/libdolfin1.3-dev.install: Remove pkg-config file dolfin.pc (cmake files should be used instead). * debian/rules: Remove .pyc files in get-orig-source target. -- Johannes Ring Fri, 14 Feb 2014 19:11:50 +0100 dolfin (1.2.0+dfsg-4) unstable; urgency=medium * Team upload. * CSGCGALMeshGenerator3D-oom.patch: new patch, workaround for FTBFS on some arches due to g++ eating all the RAM. -- Sébastien Villemot Sat, 14 Dec 2013 19:16:13 +0100 dolfin (1.2.0+dfsg-3) unstable; urgency=low * Team upload. * Refactor patches for PETSc/SLEPc 3.4, to fix a missing symbol in the library + petsc-slepc-3.4.2.patch: remove patch + {slepc,petsc}-3.4.patch: new patches taken from upstream -- Sébastien Villemot Sun, 27 Oct 2013 15:48:52 +0100 dolfin (1.2.0+dfsg-2) unstable; urgency=low * Team upload. * Update (build-)dependencies to libpetsc3.4.2-dev and libslepc3.4.2-dev. * petsc-slepc-3.4.2.patch: new patch to adapt for the new PETSC/SLEPC. -- Sébastien Villemot Sat, 26 Oct 2013 04:33:36 +0200 dolfin (1.2.0+dfsg-1) unstable; urgency=low * New upstream release (closes: #718636, #718153). * debian/control: - Replace libdolfin1.1 with libdolfin1.2 and libdolfin1.1-dev with libdolfin1.2-dev to follow library soname. - Bump required version for ufc, python-ufc, python-ffc, python-ufl, and python-instant. - Add libdolfin1.1-dev to Conflicts and Replaces for binary package libdolfin1.2-dev. - Bump Standards-Version to 3.9.4. - Remove DM-Upload-Allowed field. - Bump required debhelper version in Build-Depends. - Replace python-all-dev with python-dev in Build-Depends. - Remove cdbs from Build-Depends. - Use canonical URIs for Vcs-* fields. - Disable libcgal-dev on armel. - Enable libpetsc3.2-dev and libslepc3.2-dev on armhf and s390x. - Enable libptscotch-dev on all arches. - Add new debug package python-dolfin-dbg. * debian/compat: Bump to compatibility level 9. * debian/rules: - Rewrite for debhelper (drop cdbs). - Avoid hardcoding the swig2.0 version (closes: #692852). - Update get-orig-source target to remove non DFSG-free stuff, update watch file accordingly. * Update debian/copyright and debian/copyright_hints. * Move debian/libdolfin1.1.install to debian/libdolfin1.2.install and debian/libdolfin1.1-dev.install to debian/libdolfin1.2-dev.install to follow library soname. * Add dolfin-get-demos in dolfin-bin.install and add manual page for it. * Add all CMake files in libdolfin1.2-dev.install. -- Johannes Ring Tue, 06 Aug 2013 16:49:23 +0200 dolfin (1.1.0-1) UNRELEASED; urgency=low * New upstream release. * debian/control: - Replace libdolfin1.0 with libdolfin1.1 and libdolfin1.0-dev with libdolfin1.1-dev to follow library soname. - Bump required version for ufc, python-ufc, python-ffc, python-ufl, and python-instant. - Add libdolfin1.0-dev to Conflicts and Depends for binary package libdolfin1.1-dev. - Add libvtk5-dev, libvtk5-qt4-dev, libqt4-dev, libhdf5-mpi-dev, libboost-timer-dev and libboost-chrono-dev to Build-Depends and in Depends field for binary package libdolfin1.1-dev. - Add python-ply to Depends for binary package python-dolfin. - Remove python-viper from Depends for binary package python-dolfin. * debian/rules: Enable building with HDF5, VTK, and QT. * Move debian/libdolfin1.0.install to debian/libdolfin1.1.install and debian/libdolfin1.0-dev.install to debian/libdolfin1.1-dev.install to follow library soname. * debian/patches: Remove patches now fixed upstream. * Determine swig2.0 version at build time (closes: #692852). Thanks to Stefano Riviera for the patch. -- Johannes Ring Thu, 10 Jan 2013 11:28:21 +0100 dolfin (1.0.0-7) unstable; urgency=low * debian/control: - Remove Conflicts and Replaces from binary package libdolfin1.0-dbg. - Update long description for all packages. - Add python-netcdf to Depends for binary package python-dolfin (closes: #674014). - Require SWIG upstream version 2.0.7 for binary package python-dolfin (closes: #675207). - Require UFC >= 2.0.5-3. -- Johannes Ring Fri, 29 Jun 2012 09:45:28 +0200 dolfin (1.0.0-6) unstable; urgency=low * debian/rules: Set default Python version to fix FTBFS when Python3 is available (closes: #672952). * debian/control: Remove Provides: libdolfin0-dev from libdolfin1.0-dev (and same to -dbg package). -- Johannes Ring Mon, 21 May 2012 10:09:59 +0200 dolfin (1.0.0-5) unstable; urgency=low * Add patches to fix problems with SWIG 2.0.5 and GCC 4.7. * debian/control: Require UFC >= 2.0.5-2. -- Johannes Ring Mon, 14 May 2012 11:25:47 +0200 dolfin (1.0.0-4) unstable; urgency=low * debian/watch: Replace http with https in URL. * debian/control: - Add libcgal-dev to Build-Depends and Depends for binary package libdolfin1.0-dev. - Bump Standards-Version to 3.9.3 (no changes needed). * debian/rules: - Enable CGAL support. - Call dh_numpy in binary-install/python-dolfin target to fix lintian error missing-dependency-on-numpy-abi. -- Johannes Ring Tue, 20 Mar 2012 14:47:27 +0100 dolfin (1.0.0-3) unstable; urgency=low * Disable building with PETSc, SLEPc and SCOTCH on some arches. -- Johannes Ring Tue, 14 Feb 2012 11:46:11 +0100 dolfin (1.0.0-2) unstable; urgency=low * debian/control: - Replace libpetsc3.1-dev and libslepc3.1-dev with libpetsc3.2-dev and libslepc3.2-dev, respectively. - Require libptscotch-dev, libpetsc3.2-dev and libslepc3.2-dev on all arches. * debian/rules: Help CMake find version 3.2 of PETSc and SLEPc by defining PETSC_DIR and SLEPC_DIR variables, respectively. -- Johannes Ring Mon, 30 Jan 2012 11:45:31 +0100 dolfin (1.0.0-1) unstable; urgency=low * New upstream release. * debian/control: - Bump version numbers for python-ufc, python-ffc, python-viper, python-ufl and python-instant in Depends field for binary package python-dolfin. - Bump version numbers for ufc and python-ufc in Build-Depends and in Depends field for binary package libdolfin1.0-dev. -- Johannes Ring Thu, 08 Dec 2011 08:47:31 +0100 dolfin (1.0-rc2-1) unstable; urgency=low * New upstream release. * debian/control: Bump version for ufc and python-ufc to 2.0.4. -- Johannes Ring Tue, 29 Nov 2011 11:44:52 +0100 dolfin (1.0-rc1-1) unstable; urgency=low * New upstream release. * debian/control: - Update Homepage field. - Add libboost-math-dev to Build-Depends and in Depends field for binary package libdolfin1.0-dev. * Disable Trilinos support (version >= 10.8.1 now required). * Remove patch for building with Trilinos. * Update debian/copyright and debian/copyright_hints. -- Johannes Ring Tue, 22 Nov 2011 12:10:02 +0100 dolfin (1.0-beta2-1) unstable; urgency=low * New upstream release. * Add lintian override dolfin-dev: empty-binary-package. * debian/control: - Add libboost-mpi-dev in Build-Depends and in Depends field for binary package libdolfin1.0-dev. - Bump version numbers for dependencies ufc, python-ufc, python-ffc, and python-ufl. * debian/patches: Remove patch for importing PyTrilinos before DOLFIN as this is now fixed upstream. -- Johannes Ring Thu, 27 Oct 2011 13:17:47 +0200 dolfin (1.0-beta-1) unstable; urgency=low * New upstream release. This release fixes a large number of bugs and brings many improvements. The most notable changes are improved support for parallel computing and a redesigned and simplified interface for solving variational problems. * debian/control: - Add libboost-iostreams-dev to Build-Depends and to Depends in -dev package. - Replace libdolfin0 with libdolfin1.0 and libdolfin0-dev with libdolfin1.0-dev to follow library soname. - Bump required version for ufc, python-ufc, python-ffc, python-viper, python-ufl, and python-instant. - Add provide, replace and conflict on libdolfin0-dev for binary package libdolfin1.0-dev. Similarly for libdolfin1.0-dbg. * Add patch for importing PyTrilinos before dolfin (closes: #631589). * Rename libdolfin0.install to libdolfin1.0.install and libdolfin0-dev.install to libdolfin1.0-dev.install to follow library soname. -- Johannes Ring Wed, 17 Aug 2011 12:01:58 +0200 dolfin (0.9.11-1) unstable; urgency=low * New upstream release. This release moves to SWIG 2.0 and it incorporates a significant number of bug fixes. * debian/control: - Bump Standards-Version to 3.9.2 (no changes needed). - Replace swig with swig2.0 in Build-Depends. - Add swig2.0 to Depends for binary package python-dolfin. - Bump required version for ufc and python-ufc in Build-Depends. - Bump required version for ufc, python-ufc, python-ffc, python-ufl and python-instant in Depends for binary packages libdolfin0-dev and python-dolfin. * debian/rules: - Set SWIG_EXECUTABLE to /usr/bin/swig2.0. - Use DEB_COMPRESS_EXCLUDE_ALL instead of deprecated DEB_COMPRESS_EXCLUDE. - Include cdbs utils.mk rule for automated copyright checks. * debian/copyright: - Update for upstream license change to LGPLv3. - Switch to DEP-5 format. * Remove custom cdbs rules and licensecheck script for copyright check. * Disable MPI on lam architectures (closes: #627172). * Add patch to fix FTBFS when Trilinos is enabled (closes: #624925). -- Johannes Ring Wed, 18 May 2011 13:30:21 +0200 dolfin (0.9.10-2) unstable; urgency=low * Move from python-central to dh_python2 (closes: #616793). - Remove python-central from Build-Depends. - Bump minimum required python-all-dev package version to 2.6.6-3~. - Remove XB-Python-Version line. - Bump minimum required cdbs version to 0.4.90~. - Replace XS-Python-Version with X-Python-Version. - Replace call to dh_pycentral with dh_python2 in debian/rules. * Build for all supported Python versions. * Remove some unnecessary packages in Depends for binary packages libdolfin0 and libdolfin0-dev. * Add ufc and python-ufc in Depends for binary package libdolfin0-dev. * Add python-ufc, python-ffc, python-viper, python-ufl python-instant, and python-numpy in Depends for binary package python-dolfin. * Disable building with PETSc and SLEPc on some architectures. * Remove old Provides field for binary package python-dolfin. -- Johannes Ring Fri, 15 Apr 2011 09:17:37 +0200 dolfin (0.9.10-1) unstable; urgency=low * New upstream release. This release fixes bug "FTBFS: error: 'SCOTCH_Dgraph' was not declared in this scope" (closes: #612602). * debian/control: - Add libslepc3.1-dev and libboost-thread-dev to Build-Depends and Depends field in binary package libdolfin0-dev. - Bump build dependency on python-ufc to >= 2.0.0. - Remove Build-Depends-Indep field as upstream no longer ships the user manual. - Remove old fields Conflicts, Provides, and Replaces from libdolfin0-dev, libdolfin0, libdolfin0-dbg, and python-dolfin. * Remove all patches as they are now incorporated upstream. * Add dolfin-plot and dolfin-version to debian/dolfin-bin.install. * Remove .doc-base file since the user manual is removed by upstream. * Remove targets clean and install/dolfin-doc from debian/rules since they are no longer needed. -- Johannes Ring Thu, 24 Feb 2011 10:34:44 +0100 dolfin (0.9.9-4) unstable; urgency=low * Update Homepage field in debian/control and Maintainer field in debian/copyright. * Add patch for generating correct pkg-config file dolfin.pc. -- Johannes Ring Tue, 11 Jan 2011 12:36:55 +0100 dolfin (0.9.9-3) unstable; urgency=low * Add patch from upstream to fix problem with the CMake config file (dolfin-config.cmake) having the wrong path to the DOLFIN library. -- Johannes Ring Tue, 14 Sep 2010 18:45:39 +0200 dolfin (0.9.9-2) unstable; urgency=low * debian/rules: Make CMake skip adding runtime paths. -- Johannes Ring Tue, 14 Sep 2010 10:49:24 +0200 dolfin (0.9.9-1) unstable; urgency=low * New upstream release. * Switch to CMake CDBS class: - Replace scons with cmake in Build-Depends and in Suggests for binary package dolfin-doc. - Add cmake to Depends field for binary package libdolfin0-dev. - Install CMake config file for DOLFIN with package libdolfin0-dev. * debian/control: - Update version for python-ufc in Build-Depends field. - Update version for python-ufl in Depends field for binary package libdolfin0-dev. - Update version for ufc and python-ffc in Depends field for binary package libdolfin0-dev. - Bump Standards-Version to 3.9.1 (no changes needed). * Add patches from upstream to help CMake find PETSc, SLEPc, and Trilinos and for installing some missing utilities (dolfin-convert and dolfin-order) and manual pages. * Update debian/copyright and debian/copyright_hints. -- Johannes Ring Mon, 13 Sep 2010 11:45:17 +0200 dolfin (0.9.8-3) unstable; urgency=low * Disable Trilinos on non-supported platforms (closes: #590100). -- Johannes Ring Wed, 04 Aug 2010 16:47:38 +0200 dolfin (0.9.8-2) unstable; urgency=low * Fix generation of pkg-config file dolfin.pc. -- Johannes Ring Sun, 04 Jul 2010 20:41:45 +0200 dolfin (0.9.8-1) unstable; urgency=low * New upstream release. * debian/control: - Update version for python-ufc in Build-Depends field. - Update version for python-ufl in Depends field for binary package libdolfin0-dev. - Update version for ufc, python-ffc, and python-viper in Depends field for binary package libdolfin0-dev. - Add libarmadillo-dev to Build-Depends and Depends for binary package libdolfin0-dev. * Allow building against either version 3.0.0 or 3.1 of PETSc. * Remove patches (added upstream). * Switch to dpkg-source 3.0 (quilt) format. * Update debian/copyright and debian/copyright_hints. * Enable Trilinos support. -- Johannes Ring Fri, 02 Jul 2010 13:24:21 +0200 dolfin (0.9.7-5) unstable; urgency=low * Add patch from upstream to detect and build with SCOTCH. -- Johannes Ring Mon, 14 Jun 2010 13:15:04 +0200 dolfin (0.9.7-4) unstable; urgency=low * Add support for PETSc 3.1 (closes: #583419). * Minor fix in Vcs fields in debian/control. -- Johannes Ring Mon, 07 Jun 2010 09:25:13 +0200 dolfin (0.9.7-3) unstable; urgency=low * debian/rules: Remove bashism (closes: #581470). -- Johannes Ring Thu, 20 May 2010 10:27:06 +0200 dolfin (0.9.7-2) unstable; urgency=low * Package moved from pkg-scicomp to Debian Science. * Enable building for multiple Python versions. * debian/control: - Replace python-dev with python-all-dev in Build-Depends. - Update version dependencies for python-ufc, ufc, python-ffc, and python-viper (closes: #571780). - Replace libscotch-dev with libptscotch-dev in Build-Depends and in Depends for binary package libdolfin0-dev. * Add configure target to cdbs tweaks for scons. * Rename binary package python-pydolfin0 to python-dolfin. -- Johannes Ring Tue, 27 Apr 2010 17:21:22 +0200 dolfin (0.9.7-1) unstable; urgency=low * New upstream release. * debian/control: Add pkg-config to Build-Depends and Depends in binary package libdolfin0-dev. * Do not build with GTS (support was removed upstream). * Keep debian/copyright and debian/copyright_hints up to date. -- Johannes Ring Thu, 18 Feb 2010 00:40:38 +0100 dolfin (0.9.6-2) unstable; urgency=low * Disable support for Trilinos for now. -- Johannes Ring Sat, 13 Feb 2010 09:55:48 +0100 dolfin (0.9.6-1) unstable; urgency=low * New upstream release. * debian/control: - Add libtrilinos-dev to Build-Depends and Depends for binary package libdolfin0-dev. - Add python-pytrilinos to Build-Depends and Depends for binary package python-pydolfin0. - Bump Standards-Version to 3.8.4 (no changes needed). * debian/rules: - Enable building with Trilinos. - Remove some old lintian fixes. - Fix problem when generating pkg-config dolfin.pc in install/libdolfin0-dev target. * debian/copyright: Keep up-to-date with new and removed files. -- Johannes Ring Fri, 12 Feb 2010 10:27:02 +0100 dolfin (0.9.5-1) unstable; urgency=low * New upstream release. This release simplifies the use of Constants and Expressions in both the C++ and Python interfaces, with the automatic selection of function spaces from Python. Support for computing eigenvalues of symmetric matrices has been improved and a number of small bugs have been fixed. * debian/watch: Update download URL. * debian/copyright: Update for new and removed files. * debian/rules: - Include new adaptivity demos in dolfin-doc package. - Disable ParMETIS and MTL4 explicitly. * Add debian/dolfin-doc.doc-base for DOLFIN user manual. * debian/control: Slight modifications in package descriptions. * debian/python-pydolfin0.install: Allow both site-packages and dist-packages. -- Johannes Ring Thu, 10 Dec 2009 11:53:04 +0100 dolfin (0.9.4-1) unstable; urgency=low * New upstream release. This version cleans up the design of the function class by adding a new abstraction for user-defined functions called Expression. A number of minor bugfixes and improvements have also been made. * debian/watch: Update for new flat directory structure. * Update debian/copyright. * debian/rules: Use explicit paths to PETSc 3.0.0 and SLEPc 3.0.0. -- Johannes Ring Mon, 12 Oct 2009 14:13:18 +0200 dolfin (0.9.3-1) unstable; urgency=low * New upstream release. This version provides many new features, improvements and bug fixes, including improved XML file handling, improved Python support and compressed VTK file output. Experimental parallel assembly and solve is now available, with fully distributed meshes, parallel mesh partitioning and parallel IO. * debian/control: - Add DM-Upload-Allowed: yes. - Bump debhelper version to 7. - Bump Standards-Version to 3.8.3 (no changes needed). - Add libboost-program-options-dev and libboost-filesystem-dev to Build-Depends and to Depends for binary package libdolfin0-dev. * debian/rules: - Update for new 3 step build process. - Build documentation. * Update debian/copyright. * Remove old patches (now included upstream). * Remove (temporary) support for Trilinos because of #529807. -- Johannes Ring Mon, 28 Sep 2009 09:21:05 +0200 dolfin (0.9.2-2) unstable; urgency=low * debian/control: - add build-dependency on libtrilinos-dev and libboost-serialization-dev (closes: #540118). - add libtrilinos-dev to Depends field for -dev package. - add python-pytrilinos to Depends field for python- package. - change -dbg package section to debug (removes lintian warning). - update Standard-Version to 3.8.2. * debian/rules: enable building against Trilinos. * debian/patches: add patch for build system to find Trilinos (taken from upstream development repository). -- Johannes Ring Mon, 10 Aug 2009 16:03:52 +0200 dolfin (0.9.2-1) unstable; urgency=low * Initial release (Closes: #503082) -- Johannes Ring Tue, 16 Sep 2008 08:41:20 +0200