gutenprint (5.2.10-3) unstable; urgency=medium * Add autopkgtest suite that tests all drivers using cups-client's test-drivers utility * On upgrade, remove driver update timestamp in cups' trigger cache to ensure all earlier printers are refreshed (Closes: #749600) -- Didier Raboud Mon, 23 Jun 2014 19:31:46 +0200 gutenprint (5.2.10-2) unstable; urgency=medium * Add Pre-Depends against dpkg-dev for dir_to_symlink support (Closes: #749931) -- Didier Raboud Sun, 01 Jun 2014 15:29:31 +0200 gutenprint (5.2.10-1) unstable; urgency=medium * New 5.2.10 final upstream release * Fix drivers listing by re-introduction --libdir as well as the specific dh_makeshlibs and dh_shlibdeps calls, unfortunately dropped in the packaging cleanup * Fix ppd-updater trigger installation * Drop the upstream patch to fix the usb backend crash; was from upstream * Rework the /doc/ directories symlinks -- Didier Raboud Wed, 28 May 2014 13:45:00 +0200 gutenprint (5.2.10~pre2-2) unstable; urgency=medium * Fix printer-driver-gutenprint installation of common files on Linux (Closes: #748761) * Adopt package from Roger, replace him as Uploader, with many thanks for his past work! (Closes: #479397) -- Didier Raboud Thu, 22 May 2014 08:08:54 +0200 gutenprint (5.2.10~pre2-1) unstable; urgency=low * Team upload * New upstream release o Added a unified CUPS backend to support selected dye sublimation printers. o Added support for many new Epson and Canon inkjets and for many dye sublimation printers. Support for new Canon inkjets mostly experimental. o Improved support for many already supported dye sublimation printers. o Corrected page dimensions for borderless printing with Canon printers. o Added duplex support for the EPSON WorkForce 645. o Expanded printable area at the bottom of the page for the Epson Stylus Pro 3800 and 3880. o Added IEEE1284 device IDs for many Epson and Canon inkjets (LP: #1248303), monochrome laser printers of all manufacturers, and dye sublimation printers of all manufacturers. o Added Catalan, Turkish, and Vietnamese translations. [ Didier Raboud ] * Simplify buildsystem to make use of recent debhelper features * Let printer-driver-gutenprint only depend on perl-base through dh_perl -p * Only build-depend on libusb-1.0-dev on !hurd-any as it's not available there * Add patch to avoid running the insanely long test-rastertogutenprint build-test that makes sbuild timeout * Build-depend and use dh_autoreconf to make the latest patches useful * Drop Section redundancy in printer-driver-gutenprint * Correct the lintian warning and the dh_fixperms call around gutenprint52+usb * Import a bunch of Ubuntu changes, thanks to Till Kamppeter. [ Till Kamppeter ] * Replace the printer-driver-gutenprint postinst with a ppd-updater trigger. Update the PPD files of all already existing print queues using this driver when updating this package. In contrary to Gutenprint's own cups-genppdupdate, the script of the cups package can also migrate PPD files. In our case we migrate Foomatic/IJS PPD files to the equivalent PPDs using the CUPS Raster driver of Gutenprint and we replace simplified PPD files by the corresponding standard PPDs, as we discontinue the simplified PPDs in Ubuntu to reduce the delta to Debian and to make printer model/driver listings in printer setup tools less cluttered. * Replaced dependency of printer-driver-gutenprint on ghostscript-cups by "cups-filters (>= 1.0.36) | ghostscript-cups (<< 9.08)" as Ghostscript's CUPS filters moved to cups-filters from cups-filters 1.0.36/Ghostscript 9.08 on. * Add two configure flags to avoid depending on the CUPS version detection code to enable CUPS 1.2 enhancements and disable the CUPS PPD files. * Build-depend on libusb-1.0-0-dev for the new CUPS backend for dye sublimation printers on USB * Install new USB printer blacklist file for the CUPS USB backend (for dye sublimation printers using Gutenprint's own backend) * Add upstream patch to fix the gutenprint52+usb CUPS backend crashing on failure of USB access via libusb (LP: #1297326) * Set gutenprint52+usb CUPS backend to 700 permissions so that CUPS runs it as root (LP: #1297326) * Build, install and fix the permissions of the usb backend only on linux-any as kfreebsd's libusb doesn't have the matching API yet -- Didier Raboud Thu, 15 May 2014 21:12:31 +0200 gutenprint (5.2.9-2) unstable; urgency=low * Team upload [ Didier Raboud ] * Move the repository from collab-maint to printing; update the VCS-* fields accordingly * Bump Standards-Version to 3.9.5 without changes needed * Add the non-minified jquery 1.7.1 source to debian/missing-sources * Let {lib,}gutenprint-doc depend on libjs-jquery and symlink the jquery.js to the packaged version * Add homepage URL * Stop installing .po files in gutenprint-locales (Closes: #650758) [ Bart Martens ] * Add debian/watch -- Didier Raboud Tue, 15 Apr 2014 14:16:04 +0200 gutenprint (5.2.9-1) unstable; urgency=low * New upstream stable release. * Drop patches against 5.2.8-1 to correct library versioning and linking, which have been incorporated upstream. -- Roger Leigh Mon, 09 Jul 2012 23:16:31 +0100 gutenprint (5.2.8-1) unstable; urgency=low * New upstream stable release. * debian/README.building: Document git workflow. * debian/control: - Upgrade Standards-Version to 3.9.3 - Require debhelper >= 9. * debian/rules: - Re-enable NLS with --enable-nls. * printer-driver-gutenprint no longer installs profile.jpg. * Re-enable NLS with --enable-nls. -- Roger Leigh Thu, 21 Jun 2012 23:31:35 +0100 gutenprint (5.2.7-5) unstable; urgency=low * Apply patch to fix cups-genppd on Linux (and all non-Apple) platforms by not using Apple-specific paths for ICC profiles. The patch removes all ICC profile information from the generated PPDs (Closes: #625925). Thanks to Julien Cristau for the patch. -- Roger Leigh Sat, 04 Feb 2012 10:57:44 +0000 gutenprint (5.2.7-4) unstable; urgency=low * printer-driver-gutenprint has versioned Conflicts and Replaces on cups-driver-gutenprint (Closes: 651507). * Remove printer-driver-gutenprint preinst, and remove parts of the postinst and postrm; the migration and cleanup tasks were done for oldstable upgrades, and are no longer required. * printer-driver-gutenprint Description matches the printing team template. -- Roger Leigh Thu, 29 Dec 2011 12:06:59 +0000 gutenprint (5.2.7-3) unstable; urgency=low * Add printer-driver-gutenprint package to replace cups-driver-gutenprint. cups-driver-gutenprint is a transitional package. * debian/control: Use multiline dependencies. -- Roger Leigh Sat, 26 Nov 2011 17:51:58 +0000 gutenprint (5.2.7-2) unstable; urgency=low * Set libdir correctly. -- Roger Leigh Sat, 23 Jul 2011 20:01:21 +0100 gutenprint (5.2.7-1) unstable; urgency=low * New upstream stable release. * Upgrade to Standards Version 3.9.2 (no changes). * Drop inactive maintainers from Uploaders. * Use dh from debhelper for building. * Use multiarch paths. -- Roger Leigh Sat, 23 Jul 2011 13:03:48 +0100 gutenprint (5.2.6-1) unstable; urgency=low * New upstream stable release. * Use source format 3.0 (quilt), drop dpatch support. * Upgrade to Standards Version 3.9.1 (no changes). * Drop unused --with-ijs configure argument. * debian/rules install-stamp rule depends on build-stamp rather than build (which is phony). -- Roger Leigh Sun, 15 Aug 2010 14:15:09 +0100 gutenprint (5.2.5-1) unstable; urgency=low * New upstream stable release. * debian/control: - Update to standards version 3.8.4. - Build-Depend on libreadline-dev. - Use ${misc:Depends}. -- Roger Leigh Thu, 18 Feb 2010 21:32:05 +0000 gutenprint (5.2.4-1) unstable; urgency=low [ Roger Leigh ] * New upstream stable release. * cups-driver-gutenprint: Depend on ghostscript-cups, required for Postscript/PDF printing. -- Roger Leigh Sun, 02 Aug 2009 11:50:51 +0100 gutenprint (5.2.3-3) unstable; urgency=low * debian/control: cups-driver-gutenprint: Depend on cups-client since lpadmin and lpstat are used during postinst (Closes: #532880). -- Roger Leigh Sat, 13 Jun 2009 10:43:09 +0100 gutenprint (5.2.3-2) unstable; urgency=low * debian/rules: Update build and build-stamp dependencies (it doesn't matter if debian/control is changed when build is called). This is already taken care of through the autoconfigure-stamp dependency. -- Roger Leigh Sat, 21 Feb 2009 12:49:23 +0000 gutenprint (5.2.3-1) experimental; urgency=low [ Roger Leigh ] * New upstream stable release. * debian/control: - Use ${source:Version} in place of ${binary:Version} for all dependencies except for shared library dependencies in library -dev packages. This relaxes the dependencies so that a specific debian revision of a package is not strictly required. Thanks to Amaya Rodrigo Sastre. - ijsgutenprint no longer depends on obsolete ghostscript packages (Closes: #447533). - Build-Depend on debhelper v7. * debian/cups-driver-gutenprint.postinst: Don't use full path when running cups-genppdupdate (fix Lintian warning). * debian/rules: - update-patch-series: Use xargs -r to cope with null input. - Use dh_prep in place of dh_clean -k. - Split install into install-arch and install-indep with common install-common rule. - For binary-arch, use -s in place of -a. -- Roger Leigh Sun, 04 Jan 2009 18:19:28 +0000 gutenprint (5.2.2-1) experimental; urgency=low [ Roger Leigh ] * New upstream stable release. -- Roger Leigh Sun, 04 Jan 2009 13:05:13 +0000 gutenprint (5.2.1-2) experimental; urgency=low [ Roger Leigh ] * debian/compat: Update to debhelper v7 compatibility. * debian/control: - Add W. van den Akker to Uploaders. - ijsgutenprint: Recommend foomatic-db-gutenprint. - Update description of GIMP Print plugin. - Build-Depend upon quilt instead of dpatch. * debian/rules: - autoconfigure-stamp: Update configure options to create globalised CUPS PPDs, and remove obsolete options. - realclean: + Remove redundant removal of -stamp files. + Save and restore config.sub and config.guess. Thanks to Till Kamppeter. + Move copying of new config.sub and config.guess to autoconfigure-stamp, or else saving and restoring has no effect. - install: Replace use of pwd with $(CURDIR). - Use quilt in place of dpatch, and add rule to generate quilt patch series from patches branch in git. - Create -stamp files in the debian/ directory, so no new files are created outside the debian directory. * debian/cups-driver-gutenprint.*: Replace use of cupsys with cups. * debian/cups-driver-gutenprint.postinst: - Automatically upgrade print queues using the obsolete canon and epson backends. Attempt to determine the most appropriate alternative backend from the device name. - Document USB backend device ID upgrade problems. * debian/cups-driver-gutenprint.NEWS: New file. - Document automatic upgrade of print queue backends. - Document USB backend device ID upgrade problems. * debian/patches/10_cups_modeldir.dpatch: Remove. * debian/patches/20_fix_gimpprint_menu_entry.dpatch: Remove. Not needed, and no longer compiled with GIMP >= 2.4. * debian/patches/21_gutenprintui_plist_localefix.dpatch: Remove. Since PPD files are no longer generated, we don't need to patch the source to use /usr/share/ppd. -- Roger Leigh Sat, 01 Nov 2008 18:47:26 +0000 gutenprint (5.2.1-1) experimental; urgency=low [ W. van den Akker ] * Upgraded to Standards version 3.8.0. * debian/*: Update version from 5.1 to 5.2. [ Roger Leigh ] * New upstream stable release. * debian/control.in: Add Vcs-Browser and Vcs-Git fields. * debian/control.in: Remove, leaving debian/control. * debian/control: Remove unnecessary version information in package descriptions. * debian/control: Rename cupsys-driver-gutenprint to cups-driver-gutenprint (already done in 5.0 branch). * debian/control: Remove dependencies prior to Lenny, including unneeded versioning and old transitional dependencies. * debian/rules: Remove library soname substitution in package names. * debian/README.building: Remove old outdated instructions. * debian/patches/20_fix_gimpprint_menu_entry.dpatch: Make executable. -- Roger Leigh Thu, 30 Oct 2008 00:27:41 +0000 gutenprint (5.1.98.2-2) experimental; urgency=low * debian/cupsys-driver-gutenprint.postinst: Remove version suffix from cups-genppdupdate. * debian/rules, debian/cupsys-driver-gutenprint.install: Remove cups-genppd; this is no longer needed with CUPS 1.2.x (Closes: #474994). * debian/control: Remove debian revision in Build-Depends package versions. -- Roger Leigh Sat, 10 May 2008 12:32:39 +0100 gutenprint (5.1.98.2-1) unstable; urgency=low * New upstream stable beta release (Closes: #439961, #480113). * debian/rules: - Remove debian/libgutenprint2.install from GENERATED_FILES, and remove the rule to generate it. - Rename versioned binaries to 5.1. - Remove commands for programs and manpages removed in this release. * debian/control.in: - Bump version from 5.0 to 5.1. - cupsys-driver-gutenprint dependency on older ghostscript versions has been restored, to allow migration to testing. * debian/cupsys-driver-gutenprint.install: - Rename versioned binaries to 5.1. - Remove cups-genppdconfig. * debian/cupsys-driver-gutenprint.postinst, debian/cupsys-driver-gutenprint.postrm, debian/cupsys-driver-gutenprint.preinst: Rename versioned binaries to 5.1. * debian/gutenprint-doc.doc-base: Update version, section is now Graphics. * debian/ijsgutenprint.install: Rename versioned binaries to 5.1. * debian/libgutenprint2.install.in: Rename to debian/libgutenprint2.install and hard-code version. * debian/libgutenprint-doc.doc-base.developer, debian/libgutenprint-doc.doc-base.reference: Section is now Programming/C. * debian/README.Debian: Bump version from 5.0 to 5.2. * -- Roger Leigh Fri, 09 May 2008 17:04:37 +0100 gutenprint (5.0.2-2) unstable; urgency=low * debian/control: - ijsgutenprint only needs to Depend upon ghostscript. The older gs-* variants are no longer needed (Closes: #447533). * debian/cupsys-driver-gutenprint.preinst: - Remove /etc/cups/command.types if the version is <- 5.0.2-2 (Closes: #455016). Thanks to Kumar Appaiah for finding this. * debian/patches/21_gutenprintui_plist_localefix.dpatch: Set locale to C before executing lpr to get non-localised output. Patches src/gutenprintui/plist.c and src/gutenprintui2/plist.c to fix querying of available printers in a non-C locale (Closes: #456281). -- Roger Leigh Sun, 06 Jan 2008 00:25:17 +0000 gutenprint (5.0.2-1) unstable; urgency=low * New upstream release. * debian/control: - Update to Standards-Version 3.7.3. - libgutenprintui2-dev is in Section libdevel. * debian/compat: Update to version 6. * debian/changelog: - Provide link to full GFDL licence text, rather than the entire licence verbatim. - Update copyright dates. -- Roger Leigh Fri, 04 Jan 2008 23:14:24 +0000 gutenprint (5.0.1-4) unstable; urgency=low * debian/control: Rename gimp-print to gimp-gutenprint. * Rename debian/gimp-print.* to debian/gimp-gutenprint.*. * debian/gimp-gutenprint.preinst, debian/gimp-gutenprint.postrm: Remove, since diversions are no longer used. * debian/gimp-gutenprint.install: Install gutenprint plug-in (Closes: #439500). -- Roger Leigh Thu, 27 Sep 2007 20:03:33 +0100 gutenprint (5.0.1-3) unstable; urgency=low * debian/control: Remove libgutenprintui1-1 and libgutenprintui-dev, * debian/rules: Disable libgutenprintui when running configure. Remove libgutenprintui1-1 from search path for dh_shlibdeps. as well as libgtk1.2-dev build dependency. * debian/libgutenprintui1-1.install: Remove. * debian/libgutenprintui1-dev.install: Remove. -- Roger Leigh Sun, 22 Jul 2007 18:46:29 +0100 gutenprint (5.0.1-2) unstable; urgency=low * debian/control.in: Use ${binary:Version} and ${source:Version} in place of deprecated ${Source-Version} substvar (Closes: #431391). Thanks to Vincent Fourmond. * debian/rules: - Don't ignore clean target errors. - Remove duplicate distclean command in the clean target. -- Roger Leigh Tue, 03 Jul 2007 23:21:40 +0100 gutenprint (5.0.1-1) unstable; urgency=low * New upstream stable release. * debian/control.in: - Remove cupsys-driver-gimpprint (cupsys-driver-gutenprint now Conflicts and Replaces this transitional package from Etch). - Remove foomatic-db-gimp-print (foomatic-db-gutenprint now Conflicts and Replaces this transitional package from Etch). - Remove ijsgimpprint (ijsgutenprint now Conflicts and Replaces this transitional package from Etch). - Replace linuxprinting.org with OpenPrinting in package descriptions (merge from Ubuntu). * debian/cupsys-driver-gutenprint.install: Move /etc/cups/command.types to /usr/share/cups/mime. * debian/cupsys-driver-gutenprint.preinst: - If upgrading from a version less than or equal to 5.0.0-2, remove /usr/share/cups/model/gutenprint/5.0. - If upgrading from a version less than or equal to 5.0.1-1, remove /usr/share/ppd/gutenprint/5.0. * debian/cupsys-driver-gutenprint.postinst: - Don't call cups-genppdconfig.5.0 now that PPD files are generated on the fly. - cups-genppdupdate.5.0 no longer needs any arguments. * debian/cupsys-driver-gutenprint.postrm: - No longer remove PPD files on purge, since PPD files are no longer provided. * debian/patches/10_cups_modeldir.dpatch: Patch from Ubuntu. Fix up PPD directory location. (Not actually used yet--the patch needs some work.) * debian/patches/20_fix_gimpprint_menu_entry.dpatch: Patch from Ubuntu. Place the Print option in a better position in the GIMP File menu. -- Roger Leigh Sun, 24 Jun 2007 23:22:03 +0100 gutenprint (5.0.0-3) unstable; urgency=low * cupsys-driver-gutenprint: Move PPD files from /usr/share/cups/model/gutenprint/5.0 to /usr/share/ppd/gutenprint/5.0, to comply with the Debian PPD File Structure Specification (http://wiki.debian.org/PpdFileStructureSpecification). The postinst and postrm scripts have been updated to remove the old PPDs, generate new PPDs in the new location, and to upgrade PPDs using the new location. Closes: #396642. * debian/control: cupsys-driver-gutenprint Depends upon cupsys or cups >= 1.2.5, so CUPS is guaranteed to find the PPDs in the new location. -- Roger Leigh Thu, 2 Nov 2006 22:42:04 +0000 gutenprint (5.0.0-2) unstable; urgency=low * debian/control.in: cupsys-driver-gutenprint does not recommend gnome-gv | postscript-viewer (Closes: #384232). It is doubtful this was of any useful value. Thanks to Christian Hammers. -- Roger Leigh Tue, 22 Aug 2006 23:00:04 +0100 gutenprint (5.0.0-1) unstable; urgency=low * New upstream stable release. * debian/compat: Switch to debhelper compatibility level 5. * debian/control.in: - Replace "beta" with "stable" in package descriptions. - Add gutenprint-doc package now that GFDL licensed material with no invariant sections is allowed in main. - Build-Depend on debhelper >= 5.0.0. * debian/copyright: Include full GFDL text. * debian/rules: - Update upstream version; compute from changelog revision number. - Don't compress .pdf and .odt files. * debian/gutenprint-doc.doc-base.in: Use new PDF manual rather than old (removed) HTML user's guide. * debian/gutenprint-doc.install: Install new PDF manual (and ODT source) instead of old (removed) HTML user's guide. * debian/patches: Drop patches applied upstream: - 05_genppdconfig_remove_perlmenu.dpatch - 06_genppdupdate_egrep_stdin_freeze.dpatch - 07_print_ps_imageable_area_rounding.dpatch - 08_escputil_raw_device_open.dpatch * configure.ac: Teach PACKAGE_DATA_DIR about $datarootdir. * doc/Makefile.am: install-data-local: Install files from $(srcdir), to fix VPATH build. -- Roger Leigh Sat, 12 Aug 2006 18:31:14 +0100 gutenprint (4.3.99+cvs20060521-4) unstable; urgency=low * src/escputil/escputil.c: When a raw device cannot be opened, display a more informative error message. Patch installed as debian/patches/08_escputil_raw_device_open.dpatch (Closes: #352106). -- Roger Leigh Tue, 6 Jun 2006 21:06:56 +0100 gutenprint (4.3.99+cvs20060521-3) unstable; urgency=low * src/main/print-ps.c: Round ImageableArea dimensions towards the centre of the page, and preserve locales recursively. Patch installed as debian/07_print_ps_imageable_area_rounding.dpatch (Closes: #329027). -- Roger Leigh Mon, 5 Jun 2006 10:43:30 +0100 gutenprint (4.3.99+cvs20060521-2) unstable; urgency=low * debian/rules: Unconditionally set DIALOG when running configure. * src/cups/cups-genppdupdate.in: Don't freeze waiting on stdin when running egrep. Patch installed as debian/patches/06_genppdupdate_egrep_stdin_freeze.dpatch; thanks to Felix C. Stegerman for identifying the fault and providing the patch (Closes: #368446). -- Roger Leigh Mon, 22 May 2006 19:21:50 +0100 gutenprint (4.3.99+cvs20060521-1) unstable; urgency=low * New upstream release candidate. * doc/Makefile.am, doc/Makefile.in: Drop patches from the .diff.gz which have been dropped upstream. * debian/cupsys-driver-gutenprint.docs, debian/gimp-print.docs, debian/ijsgutenprint.docs: Drop doc/gutenprint-options, which is no longer present. * debian/libgutenprint-doc.doc-base.developer: Use book1.html, rather than index.html, which is no longer present in the upstream release (Closes: #367412). * debian/control: - Update to Standards-Version 3.7.2. - escputil: Recommend cupsys-bsd|lprng|lpr to advise that an lpr command is available (Closes: #352102). * debian/copyright: Update with current CVS repository location (Closes: #361120). -- Roger Leigh Sun, 21 May 2006 12:40:54 +0100 gutenprint (4.3.99+cvs20060121.dfsg.1-1) unstable; urgency=low * New upstream release candidate (5.0.0-rc2). * The many options provided by Gutenprint are now documented, and this documentation (gutenprint-options) is now provided for the cupsys-driver-gutenprint, ijsgimpprint and gimp-print packages in their documentation directories (Closes: #323172). * Revert accidental conversion to a debian-native source package in the last release. * debian/cupsys-driver-gimpprint.postinst, debian/cupsys-driver-gimpprint.postrm: Use invoke-rc.d when reloading cupsys, and don't fail if cupsys fails to reload. Patches pulled from the Ubuntu patch repository for gimp-print. -- Roger Leigh Sun, 22 Jan 2006 14:21:19 +0000 gutenprint (4.3.99+cvs20051122.dfsg.1-2) unstable; urgency=low * debian/control.in: Remove xlibs-dev from Build-Depends, in anticipation of its removal from unstable. -- Roger Leigh Fri, 16 Dec 2005 10:53:04 +0000 gutenprint (4.3.99+cvs20051122.dfsg.1-1) unstable; urgency=low * New upstream CVS snapshot (Closes: #340155). * The GFDL licensed user's guide has been removed from the upstream tarball to create a DFSG-free .orig.tar.gz. * Several Epson Stylus Photo printers have been retuned since the last version (Closes: #335789). * The Epson Stylus C88 is now supported (Closes: #338961). * debian/control.in: - Improve the ijsgutenprint package description (Closes: #337845). - Remove 'Suggests: gutenprint-doc (>= ${Source-Version})' from gimp-print and cupsys-driver-gutenprint. - Remove the gutenprint-doc package, which was GFDL licensed. The control data is kept in debian/control.gfdl. * debian/rules: Update UPSTREAM_VERSION to 5.0.0-rc2. * debian/copyright: Remove the GFDL manual paragraph, and document its removal due to DFSG incompatibility. -- Roger Leigh Tue, 22 Nov 2005 15:44:02 +0000 gutenprint (4.3.99+cvs20050901-1) unstable; urgency=low * New upstream release candidate. * Drop patches which have been incorporated upstream: - 01_cups_genppdupdate_filename_metacharacters.dpatch - 02_escp2_r800_papers.dpatch - 03_escp2_colour_adjust_segfault.dpatch - 04_print_settings_corruption.dpatch * debian/control: - cupsys-driver-gutenprint: Drop libperlmenu-perl dependency. - gimp-print: Add an "Enhances: gimp" to reinforce the fact this is a useful part of gimp (Closes: #322066). This does not entirely fix the upgrade issues, but without a strict dependency in gimp (which the author does not want), this is the best that can be done. * src/cups/cups-genppdconfig.in: Remove support for perlmenu in favour of dialog(1). This prevents a number of warnings on startup, and also removes a lot of dead code (Closes: #323450). Applied as 05_genppdconfig_remove_perlmenu.dpatch. -- Roger Leigh Sat, 3 Sep 2005 20:46:06 +0100 gutenprint (4.3.99+cvs20050813-2) unstable; urgency=low * src/main/print-canon.c: Change "Plain PIXMA" paper name to "PlainPIXMA" in order to avoid illegal whitespace in generated PPD files (Closes: #322397). -- Roger Leigh Wed, 31 Aug 2005 21:16:10 +0100 gutenprint (4.3.99+cvs20050813-1) unstable; urgency=low * New upstream release candidate. * src/cups/cups-genppdconfig.in: drop Locale::gettext patch, which is now incorporated upstream. * debian/control.in, debian/rules: Use dpatch. * Added cups-genppdupdate patch as 01_cups_genppdupdate_filename_metacharacters.dpatch * Don't segfault when using certain paper types with an Epson R800. Applied patch from Dan Torop as 02_escp2_r800_papers.dpatch and 03_escp2_colour_adjust_segfault.dpatch (Closes: #321603). * Don't corrupt print settings under certain conditions, due to using uninitialised global variables. Applied patch from upstream based on a patch contributed by Dan Torop as 04_print_settings_corruption.dpatch (Closes: #321599). * debian/debian/cupsys-driver-gutenprint.postinst: Remove bashisms. -- Roger Leigh Sun, 14 Aug 2005 22:20:52 +0100 gutenprint (4.3.99+cvs20050801-1) unstable; urgency=low * New upstream release candidate. * src/cups/cups-genppdconfig.in: Remove "use Locale::gettext" to drop missing dependency on liblocale-gettext-perl (Closes: #320745). -- Roger Leigh Tue, 2 Aug 2005 21:06:08 +0100 gutenprint (4.3.99+cvs20050715-4) unstable; urgency=low * debian/rules: Correct the names of the ijsgutenprint symlinks. -- Roger Leigh Thu, 28 Jul 2005 23:19:35 +0100 gutenprint (4.3.99+cvs20050715-3) unstable; urgency=low * src/cups/cups-genppdupdate.in: Apply patch to handle shell metacharacters in PPD filenames, to fix a regression from cupsys-driver-gimpprint (Closes: #319109). * debian/control.in: Add foomatic-db-gimp-print as a transitional package to ease upgrades. * debian/rules: ijsgutenprint symlinks should not be relative to the build directory (Closes: #319416). -- Roger Leigh Thu, 28 Jul 2005 21:14:31 +0100 gutenprint (4.3.99+cvs20050715-2) unstable; urgency=low * debian/control.in: - ijsgimpprint depends on ijsgutenprint, not cupsys-driver-gutenprint (Closes: #318911). - ijsgimpprint is in section text, not graphics (correction of override disparity). -- Roger Leigh Mon, 18 Jul 2005 18:39:47 +0100 gutenprint (4.3.99+cvs20050715-1) unstable; urgency=low * New upstream release candidate. * debian/control.in: Change Maintainer to Debian Printing Group . * debian/rules: Don't build translated PPDs. They may be generated after installation by the user. -- Roger Leigh Sat, 16 Jul 2005 22:45:28 +0100 gutenprint (4.3.99+cvs20050702-1) experimental; urgency=low * New upstream release candidate (Closes: #293890). * Renamed package to gutenprint. The following packages were renamed in consequence: - cupsys-driver-gimpprint renamed to cupsys-driver-gutenprint - foomatic-db-gimp-print renamed to foomatic-db-gutenprint - gimpprint-doc renamed to gutenprint-doc - gimpprint-locales renamed to gutenprint-locales - ijsgimpprint renamed to ijsgutenprint - libgimpprint renamed to libgutenprint - libgimpprint-dev renamed to libgutenprint-dev - libgimpprint-doc renamed to libgutenprint-doc * New packages: - libgimpprintui1-1 (GTK+ 1.2 UI library) - libgimpprintui1-dev (GTK+ 1.2 UI library headers) - libgimpprintui2-1 (GTK+ 2.0 UI library) - libgimpprintui2-dev (GTK+ 2.0 UI library headers) * Upgrade to Standards-Version 3.6.2 * Build-Depends: - replace libreadline4-dev with libreadline5-dev - add libcupsimage2-dev - remove libtool * debian/rules: add LIBRARYUI_VERSION, required to support separate sonames for libgutenprint and libgutenprintui*. * cupsys-driver-gutenprint: - add cups-genppdupdate - generates the PPDs in postinst, and removes them in prerm - use new versioned CUPS executables * libgutenprint: add modules and XML data. * libgutenprint-doc: - fix documentation installation for new API reference and developer's reference. - distribute gutenprint.pdf; gutenprint.ps is no longer created. * Remove old and outdated manual pages. * Provide versioned ijsgutenprint manual page, and unversioned symlinks for the binary and manpage. * Create a dummy cupsys-driver-gimpprint package to enable upgrades from stable. * Create a dummy ijsgimpprint package to enable upgrades from stable. * Remove symlinks in debian directory. * Don't autogenerate files in debian directory for anything but the libgutenprintui package. -- Roger Leigh Sat, 2 Jul 2005 10:12:46 +0100 gimp-print (4.2.7-10) unstable; urgency=high * cupsys-driver-gimpprint: Depend on a perl >= 5.8.0, otherwise upgrades from woody may fail due to /usr/bin/cups-genppdupdate using features only available in perl 5.8 (Closes: #307286). * Build-Depend on libreadline5-dev, rather than the old libreadline4-dev. -- Roger Leigh Mon, 2 May 2005 14:58:39 +0100 gimp-print (4.2.7-9) unstable; urgency=low * debian/cups-genppdupdate: Fix grepping of PPDs to work with PPD file names with shell metacharacters in them. Patch from Martin Pitt (Closes: #302434). -- Roger Leigh Thu, 31 Mar 2005 22:10:41 +0100 gimp-print (4.2.7-8) unstable; urgency=low * cupsys-driver-gimpprint: Depend on cupsys >= 1.1.23 to ensure that /etc/init.d/cupsys supports the force-reload option. Some older versions of cupsys did not, and this causes package configuration to fail when restarting cupsys. (Closes: #300966) -- Roger Leigh Wed, 23 Mar 2005 18:06:35 +0000 gimp-print (4.2.7-7) unstable; urgency=low * debian/control.in: - Prefer gs-esp as gs interpreter. Patch from Colin Watson. - Recommend gnome-gv as default postscript-viewer. Patch from Sebastien Bacher. -- Roger Leigh Tue, 22 Mar 2005 00:20:09 +0000 gimp-print (4.2.7-6) unstable; urgency=low * Allow A4 printing on HP DesignJet printers. Patch from Klaus Singvogel. -- Roger Leigh Sat, 19 Mar 2005 09:58:18 +0000 gimp-print (4.2.7-5) unstable; urgency=low * Patch src/cups/Makefile.in so that genppd will use the "C" locale when generating PPDs, not the locale of the build system. This will prevent wrongly UTF-8 encoded "ISOLatin1" PPDs being generated (Closes: #293178). * ijsgimpprint: Conditionally depend upon gs-afpl instead of gs-aladdin, which it replaces (Closes: #293384). -- Roger Leigh Wed, 2 Feb 2005 21:45:16 +0000 gimp-print (4.2.7-4) unstable; urgency=low * cupsys-driver-gimpprint: Use "force-reload" rather than "reload" in postinst and postrm (Closes: #274820). Reported by Martin Pitt. * Applied GNU/k*BSD patch from Robert Millan (Closes: #263763). -- Roger Leigh Tue, 5 Oct 2004 19:46:08 +0100 gimp-print (4.2.7-3) unstable; urgency=low * foomatic-db-gimp-print: ensure all files are UTF-8 encoded by building the package in a UTF-8 locale (en_GB.UTF-8). Thanks to Chris Lawrence for finding this problem. -- Roger Leigh Tue, 21 Sep 2004 21:37:38 +0100 gimp-print (4.2.7-2) unstable; urgency=medium * Medium urgency to facilitate the libtiff transition. * cupsys-driver-gimpprint: - Link explicitly with -lcupsimage, rather than `cups-config --image --libs`. This prevents unnecessary libpng, libjpeg and libtiff dependencies. The cups-config logic in configure is overridden. Thanks to Steve Langasek for this patch (Closes: #262852). - Backport some PPD generation logic from current Gimp-Print CVS, and use the new PPD keywords in cups-genppdupdate. The PPD PCFileName keyword was made compliant with the PPD standard with version 4.2.6 (read: crippled to an 8.3 DOS filename) which broke the upgrade script since the full PPD name could no longer be encoded. The new Gimp-Print specific keywords *StpDriverName, *StpPPDLocation and *StpLocale have been added to the PPDs, and this information is now used to correctly upgrade PPDs (Closes: #260072). * debian/rules: Don't enable maintainer-mode when running configure. -- Roger Leigh Tue, 3 Aug 2004 19:23:19 +0100 gimp-print (4.2.7-1) unstable; urgency=low * New upstream stable release. * Dropped patches for: - missing strdup prototype in AM_PATH_GIMPPRINT (#233971). - fixing garbage output when files generated with psnup are printed (#175970). - correct margin definitions for Epson Stylus C63, C64, C83 and C84. All of these patches have been incorporated into the new release. * Update to Standards-Version 3.6.1. * cupsys-driver-gimpprint: update Recommends to depend upon the current gs package names, and put the virtual package postscript-viewer as the last alternative, rather than the first. * cupsys-driver-gimpprint: patched src/cups/Makefile.am to disable linking rastertoprinter with a static libgimpprint. -- Roger Leigh Sat, 17 Jul 2004 17:38:35 +0100 gimp-print (4.2.6-7) unstable; urgency=high * Reupload with high urgency to shorten libcupsys2-gnutls10 transition waiting time. -- Roger Leigh Fri, 9 Jul 2004 11:56:34 +0100 gimp-print (4.2.6-6) unstable; urgency=low * cupsys-driver-gimpprint-data depends on cupsys-driver-gimpprint. -- Roger Leigh Wed, 7 Jul 2004 13:26:51 +0100 gimp-print (4.2.6-5) unstable; urgency=medium * NMU. * Rebuild against libcupsys2-gnutls10. -- Kenshi Muto Thu, 27 May 2004 16:39:55 +0000 gimp-print (4.2.6-4) unstable; urgency=low * Split architecture-independent data in cupsys-driver-gimpprint into a separate arch-all cupsys-driver-gimpprint-data package which cupsys-driver-gimpprint depends upon (Closes: #233338). * Add missing strdup prototype in AM_PATH_GIMPPRINT in gimpprint.m4. This prevents configure scripts using this macro from segfaulting on ia64 (Closes: #233971). * Correct margin definitions for Epson Stylus C63, C64, C83 and C84. This is a temporary fix until the margins have been correctly computed. * Build-Depend upon libijs-dev (>= 0.35-1) to ensure that ijsgimpprint is built against the current libijs (Closes: #237561). -- Roger Leigh Fri, 12 Mar 2004 20:32:51 +0000 gimp-print (4.2.6-3) unstable; urgency=low * Rebuild against new Foomatic packages. This should hopefully fix autobuilding problems with older Foomatic releases (which wouldn't autoconfigure on the buildd). -- Roger Leigh Mon, 1 Mar 2004 13:07:07 +0000 gimp-print (4.2.6-2) unstable; urgency=low * Fix garbage output when files generated with psnup are printed. The output quality will be degraded, and warnings will be logged, since the job options have been broken. This is because psnup generates non-ADSC compliant PostScript which makes pstops output incorrect job options. Patch from Martin Kögler (Closes: #175970). -- Roger Leigh Tue, 10 Feb 2004 19:39:17 +0000 gimp-print (4.2.6-1) unstable; urgency=low * New upstream stable release. * cupsys-driver-gimpprint: cups-genppdupdate should escape metacharacters in queue names. quotemeta fix from David Beaumont (Closes: #223081). * A locale issue which resulted in buggy PostScript output with some locales has been fixed (Closes: #221662). * CUPS PPD files moved from /usr/share/cups/model/gimp-print to /usr/share/cups/model/gimp-print/4.2. This is the 5.0 naming scheme, and will allow 4.2 and 5.0 to coexist. cups-genppdupdate uses the new scheme. -- Roger Leigh Tue, 13 Jan 2004 23:42:02 +0000 gimp-print (4.2.5-6) unstable; urgency=low * Change Recommends on gimpprint-locales to Suggests (Closes: #212302). * cupsys-driver-gimpprint postrm should not reload cupsys if it has already been removed (Closes: #217295). -- Roger Leigh Sun, 26 Oct 2003 23:10:31 +0000 gimp-print (4.2.5-5) unstable; urgency=low * Clean up package descriptions in debian/control.in. * Don't depend on essential package gzip. -- Roger Leigh Sun, 7 Sep 2003 23:04:56 +0100 gimp-print (4.2.5-4) unstable; urgency=low * Fix the use of an unintialised value in cups-genppdupdate (Closes: #193501). * cups-genppdupdate no longer prints an error when there are no PPD files available (use Perl glob() instead of shell globbing). * Update cups-genppdupdate using the latest upstream CVS version. * Replace cupsys-driver-gimpprint dependency on libcompress-zlib-perl, with a gzip dependency (gunzip replaces Compress::Zlib in cups-genppdupdate). * Update for Foomatic 3.0: - Update foomatic-db-gimp-print description (sync with foomatic-db). - Build-Depend on foomatic-db-engine (foomatic-bin is deprecated). - Update foomatic-db-gimp-print dependencies (correctly depend on the new foomatic packages and conflict with the old packages). - Run configure with --with-foomatic3 * Include escputil fix from 4.2.6 prerelease to fix intermittent hanging reads from printer (Closes: #156228). * Audit all manual pages to ensure correct use of hyphens and minus signs, required for copy and paste in a unicode locale (Closes: #203930). * gimp1.2-print has been removed now the gimp package provides an up-to-date version of the Print plugin. * Updated debian/copyright to include the GFDL-licensed User's Guide. -- Roger Leigh Mon, 25 Aug 2003 19:12:24 +0100 gimp-print (4.2.5-3) unstable; urgency=low * Build-Depend on libcupsimage2-dev (Closes: #189093). * Remove automake, autoconf, libtool, and bison from Build-Depends, since they are not strictly required. * Remove docbook-utils, texi2html and imagemagick from Build-Depends, since the documentation is pre-generated in the upstream tarball. * Change my maintainer email address to . * Move libgimpprint1-dev to section libdevel. -- Roger Leigh Wed, 23 Apr 2003 12:57:58 +0100 gimp-print (4.2.5-2) unstable; urgency=low * cupsys-driver-gimpprint: cups-genppdupdate will not die if grep exits with a nonzero status (for example, there are no Gimp-Print PPDs in use). (Closes: #179137) * cupsys-driver-gimpprint: Depend on libcompress-zlib-perl, since dh_perl doesn't compute module dependencies. (Closes: #179120, #179170, #179171, #179203) -- Roger Leigh Fri, 31 Jan 2003 23:26:51 +0000 gimp-print (4.2.5-1) unstable; urgency=low * New stable release * Update for Standards-Version 3.5.7 * Use debian/build and debian/install instead of debian/gimp-print-build and debian/gimp-print-install, respectively. * Use dh_install rather than dh_movefiles. This makes debian/rules slightly cleaner, and debian/install is unchanged after install. * Create symlinks for HTML manuals, since different versions of texi2html and db2html create different names. * Make the dependencies sane (remove incorrect dependencies, and correct dubious ones). foomatic-db-gimp-print now depends only upon foomatic-db and ijsgimpprint. * escputil has been changed to section "utils", and the override changed (Closes: #145094). * Gimp-Print PPDs are automatically upgraded using a new tool, cups-genppdupdate, which will prevent the in-use PPDs mismatching with the libgimpprint version in use (Closes: #172116). * The Epson stc640 will now print in greyscale and black and white at resolutions >= 720 DPI (Closes: #170473). * The CUPS epson backend uses non-blocking I/O, and so will not hang with some models when no status readback data is sent. -- Roger Leigh Wed, 29 Jan 2003 11:37:49 +0000 gimp-print (4.2.4-1) unstable; urgency=low * New stable release. * foomatic-db-gimp-print: removed "stp" data, to start the transition to using ijsgimpprint only. * The escputil manual page documents the needed kernel configuration options (Closes: #139000). * The gimpprint-doc package includes the following manual pages: gimpprint-color.7, gimpprint-dithers.7, gimpprint-imagetypes.7 gimpprint-inktypes.7, gimpprint-mediasizes.7 gimpprint-mediasources.7, gimpprint-mediatypes.7 gimpprint-models.7, gimpprint-resolutions.7 This documents all the features of gimp-print, in particular all of the details from src/ghost/README (Closes: #113075). * Magenta and cyan are no longer swapped on some Lexmark printers (Closes: #166815). -- Roger Leigh Tue, 26 Nov 2002 20:54:30 +0000 gimp-print (4.2.3-2) unstable; urgency=low * Use libtool 1.4.3 instead of the release version, to correctly support shared libraries on some architectures. Closes #168901 * escputil is now in section "utils". Closes #145094 -- Roger Leigh Tue, 19 Nov 2002 20:55:01 +0000 gimp-print (4.2.3-1) unstable; urgency=low * New stable release. * Fixed doc-base problems in libgimpprint-doc. The doc-base file is generated with sed to insert the version number, Closes #149847 * libgimpprint$(VERSION)-doc provides and conflicts with a virtual package libgimpprint-doc to prevent clashes with gimpprint.info docs. * New package ijsgimpprint. This provides an IJS server for use with ghostscript. * Remove the autotools, texi2html, imagemagick and docbook-utils from the Build-Depends. * Put config.sub and config.guess into scripts/ and clean libgimpprint-doc.doc-base * I am the new maintainer of gimp-print for Debian. -- Roger Leigh Sun, 20 Oct 2002 22:10:17 +0100 gimp-print (4.2.2-pre2-1) unstable; urgency=low * New stable release, Closes: #148737 * Upgrade to debhelper version 4 (RL) * Automate library versioning to work for stable and unstable series. LIBRARY_VERSION is the library major version or -UPSTREAM_VERSION (RL) * Update configure regeneration to work with configure.ac (RL) * libgimpprint$(VERSION)-dev provides and conflicts with a virtual package `libgimpprint-dev' (RL) * Remove libgimpprint.postinst as ldconfig is called by debhelper (RL) * Update package descriptions (RL) -- Eric Sharkey Thu, 6 Jun 2002 15:35:28 -0400 gimp-print (4.2.2-pre1-1) unstable; urgency=low * New upstream release, Closes: #147404, #139218 * Move escputil to section utils (RL) * Add postscript-viewer virtual package as an alternative to gs Recommends for cupsys-driver-gimpprint (RL) * Reinitialise cupsys after installation or removal of cupsys-driver-gimpprint (RL) * Correctly version libgimpprint1 shlibs with -V dh_makeshlibs option * Fix libgimpprint.postinst to use 'if' instead of 'case', removing a lintian warning. (RL) * Split out the message catalogues from the libgimpprint package into a new gimpprint-locales package to avoid filename conflicts when multiple libgimpprint versions are installed concurrently. (RL) * Add libgimpprint-doc.doc-base (existed for six months, but was never added to CVS!) (RL) * New package foomatic-db-gimpprint. Contains foomatic data (RL) -- Eric Sharkey Sat, 25 May 2002 14:20:17 -0400 gimp-print (4.2.0-4) unstable; urgency=low * Apply Roger's user's guide Makefile.am patch, Closes: #128421 * Work around bug #130756 by building docs with EPS1 figures. -- Eric Sharkey Sat, 16 Feb 2002 22:46:29 -0500 gimp-print (4.2.0-3) unstable; urgency=low * Fix locales package description, Closes: #123796 * Change conflicts to replaces, Closes: #123811 -- Eric Sharkey Mon, 31 Dec 2001 12:02:42 -0500 gimp-print (4.2.0-2) unstable; urgency=low * Fix build dependencies, Closes: #121597 * Fix broken gimpprint-doc.doc-base pointing to old index filename * Fix libgimpprint.postinst to use 'if' instead of 'case', removing a lintian warning. (Roger Leigh) * Split out the message catalogues from the libgimpprint package into a new gimpprint-locales package to avoid filename conflicts when multiple libgimpprint versions are installed concurrently. (RL) * Add libgimpprint-doc.doc-base (existed for six months, but was never added to CVS!) (RL) -- Eric Sharkey Sun, 9 Dec 2001 09:47:05 -0500 gimp-print (4.2.0-1) unstable; urgency=low * New upstream release * cupsys-driver-gimpprint only includes the basic `C' POSIX locale ppd files due to the size of the ppd files (Roger Leigh) * New package gimpprint-doc contains the new user guide. (RL) * Enable i18n (RL) * Add Build-Depends for gettext (>= 0.10.36-1), because 'make install' fails with earlier versions due to absent DESTDIR support. (RL) * libgimpprint-doc uses ps instead of dvi manual, due to inclusion of graphics (RL) * gimp1.2-print no longer registers documentation with doc-base, as the manual is provided in libgimpprint-doc (RL) * Disable building of translated PPD files (RL) -- Eric Sharkey Sun, 25 Nov 2001 22:20:33 -0500 gimp-print (4.1.99-b1-1) unstable; urgency=low * New upstream release, Closes: #110066 * Remove README.dither from libgimpprint-dev.docs (Roger Leigh) * Add image samples to gimp1.2-print and cupsys-driver-gimpprint (RL) * Change rules and control to use ABI library versioning (RL) * Changed library version names to reflect upstream library versioning change to ABI versioning. (RL) -- Eric Sharkey Mon, 23 Jul 2001 10:49:04 -0400 gimp-print (4.1.99-a2-1) unstable; urgency=low * New upstream release -- Eric Sharkey Mon, 23 Jul 2001 10:49:04 -0400 gimp-print (4.1.99-a1-1) unstable; urgency=low * New upstream release (first 4.2 pre-release) -- Eric Sharkey Tue, 10 Jul 2001 16:19:03 -0400 gimp-print (4.1.10-1) unstable; urgency=low * New upstream release (4.1.8 and 4.1.9 were buggy) -- Eric Sharkey Fri, 29 Jun 2001 23:08:27 -0400 gimp-print (4.1.7-1) unstable; urgency=low * New package libgimpprint-doc for Info and dvi docs. (Roger Leigh) * Change debian/rules to use separate binary-arch and binary-indep targets (Roger Leigh) * New upstream release -- Eric Sharkey Wed, 9 May 2001 12:19:43 -0400 gimp-print (4.1.6-2) unstable; urgency=low * Fix build dependencies to include flex, Closes: #96401 -- Eric Sharkey Tue, 8 May 2001 20:09:30 -0400 gimp-print (4.1.6-1) unstable; urgency=low * New upstream release -- Eric Sharkey Mon, 30 Apr 2001 13:45:56 -0400 gimp-print (4.1.5-2.01) unstable; urgency=low * Recompile 4.1.5-2 with updated debhelper to fix dependencies * Closes #90741 -- Eric Sharkey Fri, 6 Apr 2001 21:11:15 -0400 gimp-print (4.1.5-2) unstable; urgency=low * Clean up build process so that things work even if some scripts don't have execute permissions, complicate things a bit by using funky building script, Closes #89283, I hope... -- Eric Sharkey Thu, 15 Mar 2001 21:54:52 -0500 gimp-print (4.1.5-1) unstable; urgency=low * New upstream release * First Official version uploaded to Debian * Close ITP bug for wnpp, Closes #85563 -- Eric Sharkey Fri, 2 Mar 2001 19:59:11 -0500 gimp-print (4.1.4-2) unstable; urgency=low * Repackage gimp-print after forking the Debian branch from 4.1.4 * Add version numbers to the libgimpprint package name * Move documentation files from libgimpprint to libgimpprint-dev -- Eric Sharkey Tue, 27 Feb 2001 11:22:18 -0500 gimp-print (4.1.4-1) unstable; urgency=low * New upstream release * Debian package rewritten from scratch. * Added diversion of the print plugin that is part of the GIMP package to /usr/lib/gimp/1.2/print * Fixed shared library dependencies for programs linked with libgimpprint * Added /etc/cups/command.types as a conffile for package cupsys- driver-gimpprint * Added gimp1.2-print html and sgml docs to doc-base * Remove /etc/cups in postrm for cupsys-driver-gimprint (but won't if not empty) * Added versioned debhelper Build-Depends -- Roger Leigh Fri, 16 Feb 2001 00:16:10 +0000 gimp-print (4.0.2-1) unstable; urgency=low * Debian packages of the latest GP -- Eric Sharkey Sun, 12 Nov 2000 04:46:54 +0900 gimp-print (3.1.4-1) unstable; urgency=low * Debianised gimp-print built from gimp-print CVS at sourceforge. -- Charles Briscoe-Smith Wed, 24 May 2000 00:39:54 +0100