lm-sensors (1:3.6.0-7) unstable; urgency=medium * Switch libsensors4-dev to architecture: any. Closes: #981274. -- Aurelien Jarno Sat, 30 Jan 2021 07:05:25 +0100 lm-sensors (1:3.6.0-6) unstable; urgency=medium * Restart fancontrol.service after power sleep. Closes: #664141. * Call dh_missing with --list-missing on non-Linux. Closes: #980944. -- Aurelien Jarno Mon, 25 Jan 2021 01:03:48 +0100 lm-sensors (1:3.6.0-5) unstable; urgency=medium * Upload to unstable. -- Aurelien Jarno Sat, 16 Jan 2021 11:54:36 +0100 lm-sensors (1:3.6.0-4) experimental; urgency=medium * Upload to experimental. * Rename libsensors4-dev into libsensors-dev and replace libsensors4-dev by a transitional package for a smooth transition. The transitional package will be removed in bookworm. -- Aurelien Jarno Sun, 10 Jan 2021 18:42:27 +0100 lm-sensors (1:3.6.0-3) unstable; urgency=medium * Bump debhelper compatibility to 13. * Bump Standards-Version to 4.5.1 (no changes). * Update fancontrol.service to use the /run directory instead of /var/run. Closes: #973521. * Ensure the process has stopped before returning in fancontrol initscript. Closes: #830847. -- Aurelien Jarno Sun, 10 Jan 2021 17:58:28 +0100 lm-sensors (1:3.6.0-2) unstable; urgency=medium * Replace MACHINE by ARCH in debian/rules. Thanks to Lucas Kanashiro for the notice. Closes: #944195. -- Aurelien Jarno Tue, 05 Nov 2019 20:57:53 +0100 lm-sensors (1:3.6.0-1) unstable; urgency=medium * New upstream version. * Bump debhelper compatibility to 12. * Bump Standards-Version to 4.4.1 (no changes). * Fix debian/copyright to not refer to the versionless symlink GPL and LGPL licenses. -- Aurelien Jarno Sat, 19 Oct 2019 10:16:05 +0200 lm-sensors (1:3.5.0-3) unstable; urgency=medium * Upload to unstable. -- Aurelien Jarno Wed, 19 Dec 2018 16:58:53 +0100 lm-sensors (1:3.5.0-2) experimental; urgency=medium * libsensors-config: add a Breaks: libsensors4. This will make the transition more painful but is needed to move the configuration file from one package to another (closes: #915873). * debian/rules: fix FTCBFS by passing MACHINE to make. Thanks to Helmut Grohne for the patch (closes: #915819). * debian/rules: force the installation of /etc/sensors3.conf in the architecture independent target (closes: #915810). -- Aurelien Jarno Fri, 07 Dec 2018 19:51:55 +0100 lm-sensors (1:3.5.0-1) experimental; urgency=medium * New upstream version: - sensors-detect now point to an existing web page (closes: #813137). - Refresh 01-sensors-detect-udevadm.patch. - Refresh 06-sensors-detect-debian.patch. - Drop 07-sensors3.conf-local-changes.patch (obsolete). - Drop 12-sensors-detect-superio-x86.patch upstreamed). - Drop 13-sensors-manpage.patch (upstreamed). - Rename libsensors4 package into libsensors5. * Add a libsensors-config package and move the configuration files there. * Update debian/control, debian/copyright and debian/watch to reflect the new home page (closes: #882770). * Update debian/copyright to reflect that the library is now released under LGPL version 2.1 or later (closes: #912409). * Bump debhelper compat version to 10. * Downgrade priority from extra to optional. * Drop ancient conflicts/replaces. * Set Rules-Requires-Root: no. * Add "Provides: libsensors-dev" to libsensors4-dev to be able to transition to a version-less -dev package. * Bumped Standards-version to 4.2.1. -- Aurelien Jarno Tue, 04 Dec 2018 21:14:55 +0100 lm-sensors (1:3.4.0-4) unstable; urgency=medium * Drop the sensord package, it is not really maintained upstream, and the RRD part has some issues (closes: #244037, #469096, #790796). - Stop building it. - Remove corresponding patches. - Remove corresponding debhelper files. - Drop the build-depends on librrd-dev. * Fix udevadm path in sensors-detect (closes: #852558). -- Aurelien Jarno Wed, 05 Apr 2017 20:07:33 +0000 lm-sensors (1:3.4.0-3) unstable; urgency=medium * Switch lm-sensors and sensord packages to architecture linux-any. Add a note that libsensors4 and libsensors4-dev will only find sensors with a Linux kernel, but keep them for portability on other systems (closes: #570429). * debian/lm-sensors.init: fix LSB init output, thanks to Guillem Jover for the patch (closes: #823078). * debian/patches/15-path-max.patch: new patch to define PATH_MAX on GNU Hurd, thanks to Christoph Berg for the patch (closes: #824005). * Bumped Standards-version to 3.9.8 (no changes). -- Aurelien Jarno Thu, 19 May 2016 21:24:51 +0200 lm-sensors (1:3.4.0-2) unstable; urgency=medium * Build-depends on librrd-dev instead of librrd2-dev as the Provides has been removed without warnings. * Rewrite debian/rules usind dh. * Update 05-sensord-manpage.patch with the new Apache 2.4 default document root. Thanks to Jean-Michel Vourgère for the patch (closes: #753394). -- Aurelien Jarno Mon, 07 Sep 2015 20:51:21 +0200 lm-sensors (1:3.4.0-1) unstable; urgency=medium * New upstream version: - Fixes fancontrol when FCFANS is not set (closes: #727731). * debian/sensord.maintscript: fix version (closes: #747379, #756474). * Improve fancontrol description. * Mention sensors-detect(8) in sensors(1) (closes: #766775). * Bumped Standards-version to 3.9.6 (no changes). -- Aurelien Jarno Sun, 09 Aug 2015 18:03:52 +0200 lm-sensors (1:3.3.5-2) unstable; urgency=medium * debian/lm-sensors.preinst: remove and rely now on lm-sensors.maintscript to manage obsolete conffiles (closes: #567183). * debian/sensord.maintscript: add /etc/logcheck/ignore.d.server/sensord (closes: #747379). -- Aurelien Jarno Thu, 08 May 2014 14:48:32 +0200 lm-sensors (1:3.3.5-1) unstable; urgency=medium * New upstream version: - drop 01-sensors-conf-convert-manpage.patch (merged upstream). - refresh other patches. -- Aurelien Jarno Mon, 28 Apr 2014 19:41:14 +0200 lm-sensors (1:3.3.4-3) unstable; urgency=medium * lm-sensors.service: allow calls to sensors to fail, in case no sensors are available. * Bumped Standards-version to 3.9.5 (no changes). * Don't force xz compression when generating .deb now that it is the default. * Don't pass start and stop actions to dh_installinit. The LSB headers of the init scripts already contain all necesssary information (closes: #722074). -- Aurelien Jarno Sun, 06 Apr 2014 20:06:52 +0200 lm-sensors (1:3.3.4-2) unstable; urgency=low * debian/fancontrol.init: pass the config file location as argument of the fancontrol daemon (closes: #720213). -- Aurelien Jarno Tue, 27 Aug 2013 18:36:05 +0200 lm-sensors (1:3.3.4-1) unstable; urgency=low * New upstream version. * Use dh-systemd to get proper systemd related maintainer scripts, based on a patch from Michael Stapelberg (closes: #714190). -- Aurelien Jarno Sat, 29 Jun 2013 16:37:48 +0200 lm-sensors (1:3.3.3-1) unstable; urgency=low * New upstream version: - Don't choke on systems without PCI (closes: #695889). * Bumped Standards-version to 3.9.4.0 (no changes). * Compress .deb with xz. * Add a watch file (closes: #694848). * Fix RRD file creation with loadavg (closes: #614965). * Backport pwmconfig changes from upstream to fix multiple fan control (closes: #695895). -- Aurelien Jarno Mon, 06 May 2013 23:37:35 +0200 lm-sensors (1:3.3.2-2) unstable; urgency=low * Tell user to restart kmod instead of modules-init-tools (closes: #670213). * Install a systemd service file for lm-sensors (closes: #674778). * Correctly pass CPPFLAGS and LDFLAGS to build with hardening support. -- Aurelien Jarno Sun, 03 Jun 2012 16:21:26 +0200 lm-sensors (1:3.3.2-1) unstable; urgency=low * New upstream version: * Bumped Standards-version to 3.9.3 (no changes). * Drop useless dependency on makedev | udev (closes: #666510). -- Aurelien Jarno Mon, 23 Apr 2012 19:00:39 +0200 lm-sensors (1:3.3.1-2) unstable; urgency=low * sensors-detect: restrict super-io probes to x86 and x86_64 (closes: #657555). -- Aurelien Jarno Fri, 27 Jan 2012 10:42:53 +0100 lm-sensors (1:3.3.1-1) unstable; urgency=low * New upstream version: - Drop 12-upstream-patches.patch. - Drop 13-udev-run.patch. -- Aurelien Jarno Sun, 09 Oct 2011 15:21:24 +0200 lm-sensors (1:3.3.0-4) unstable; urgency=low * Rename source package to lm-sensors now that the version 2 is gone. * Add patch from upstream to support 2 digits kernel version (closes: #630508). * Convert to multiarch: - Bump debhelper build-dep to >= 8.1.3 for multiarch. - Add Pre-Depends: ${misc:Pre-Depends} to libsensors4 and set it Multi-Arch: same. - Install the library in the multiarch path. * Add build-arch and build-indep targets. -- Aurelien Jarno Mon, 20 Jun 2011 21:25:57 +0200 lm-sensors-3 (1:3.3.0-3) unstable; urgency=low * Correctly detect udev in sensors-detect (closes: #628228). -- Aurelien Jarno Sat, 04 Jun 2011 22:42:37 +0200 lm-sensors-3 (1:3.3.0-2) unstable; urgency=low * Avoid printing a warning if ucf is not available (closes: #626402). -- Aurelien Jarno Wed, 11 May 2011 20:02:23 +0200 lm-sensors-3 (1:3.3.0-1) unstable; urgency=low * New upstream version: - refresh all patches. - update 12-upstream-patches.patch with upstream recommended patches. - update symbols file, now that upstream only export symbols of the public API. Hope it won't break anything, otherwise we should go through a soname bump and a transition. * Remove old fancontrol links in postinst (closes: bug#612231). * Bumped Standards-version to 3.9.2 (no changes). -- Aurelien Jarno Sat, 09 Apr 2011 15:19:33 +0200 lm-sensors-3 (1:3.2.0-1) unstable; urgency=low * New upstream version. * Suggests fancontrol instead of recommending it in lm-sensors (closes: bug#567185). * Suggests lm-sensors instead of recommending it in libsensors4 (closes: bug#602914). * Suggests rrdtool in sensord (closes: bug#588132). * Detect SMSC SCH5524-NS chip (closes: bug#588355). * Bumped Standards-version to 3.9.1 (no changes). -- Aurelien Jarno Sun, 06 Feb 2011 14:46:28 +0100 lm-sensors-3 (1:3.1.2-6) unstable; urgency=low * Fix return value in fancontrol --check (closes: bug#583216). -- Aurelien Jarno Wed, 26 May 2010 19:17:40 +0200 lm-sensors-3 (1:3.1.2-5) unstable; urgency=low * Use the --check option in both the initscript and the fancontrol script (closes: bug#582979). -- Aurelien Jarno Wed, 26 May 2010 11:15:17 +0200 lm-sensors-3 (1:3.1.2-4) unstable; urgency=low * Check /etc/fancontrol before starting the daemon (closes: bug#582979). * Add a README.Debian in lm-sensors package. (closes: bug#576932). -- Aurelien Jarno Tue, 25 May 2010 11:33:23 +0200 lm-sensors-3 (1:3.1.2-3) unstable; urgency=medium * Add 09-sensord-multiple-chips.diff from upstream to fix multiple chip support in sensord (closes: bug#581036). * Fix error message in lm-sensors init script (closes: bug#581350). * Remove /etc/rc1.d/K20sensord on upgrade (closes: bug#573898). * Fix typos in pwmconfig (closes: bug#570344). -- Aurelien Jarno Mon, 24 May 2010 23:11:32 +0200 lm-sensors-3 (1:3.1.2-2) unstable; urgency=low * Detect old configuration files in init script (closes: bug#568627). -- Aurelien Jarno Sun, 07 Feb 2010 21:12:44 +0100 lm-sensors-3 (1:3.1.2-1) unstable; urgency=low * New upstream version. * Bumped Standards-version to 3.8.4 (no changes). -- Aurelien Jarno Thu, 04 Feb 2010 20:15:07 +0100 lm-sensors-3 (1:3.1.1-6) unstable; urgency=low * Move fancontrol.txt to the fancontrol package (closes: bug#567181). * Remove old init scripts if they are not modified an upgrading from version (<< 1:3.1.1-5). (closes: bug#567183). -- Aurelien Jarno Wed, 27 Jan 2010 22:11:25 +0100 lm-sensors-3 (1:3.1.1-5) unstable; urgency=low * Split-out fancontrol in a separate package (closes: bug#540677). * Restart fancontrol in postinst instead of starting it (closes: bug#552197). * Don't stop fancontrol in runlevel 0 1 6 (closes: bug#563835). * Don't stop sensord in runlevel 1. * Ignore failures to set sensors at boot time (closes: bug#566184, bug#556361). -- Aurelien Jarno Wed, 27 Jan 2010 00:00:33 +0100 lm-sensors-3 (1:3.1.1-4) unstable; urgency=low * Bumped Standards-version to 3.8.3 (no changes). * Drop libsensors4 postinst script and the dependency on makedev | udev. This part has been moved to i2c-tools. -- Aurelien Jarno Wed, 14 Oct 2009 00:20:17 +0200 lm-sensors-3 (1:3.1.1-3) unstable; urgency=low * *.init: depends on $remote_fs instead of $local_fs (closes: bug#541363). -- Aurelien Jarno Thu, 13 Aug 2009 20:18:11 +0200 lm-sensors-3 (1:3.1.1-2) unstable; urgency=low * Stop managing /etc/sensors3.conf using ucf, as user changes should now go in /etc/sensors.d/. * Mention /etc/sensors.d in libsensors4.NEWS. -- Aurelien Jarno Wed, 01 Jul 2009 21:46:24 +0000 lm-sensors-3 (1:3.1.1-1) unstable; urgency=low * New upstream version. - LDFLAGS is taken into account by the build system (closes: bug#513171). * debian/sensord.init: add a 'sleep 1' between stop and start for the restart action (closes: #528276). * debian/*.init: add status actions (closes: #525899). * Update sensord.README.Debian to mention /etc/sensors3.conf instead of /etc/sensors.conf (closes: #520056). * Bumped Standards-version to 3.8.2. -- Aurelien Jarno Sun, 28 Jun 2009 21:59:56 +0200 lm-sensors-3 (1:3.1.0-2) unstable; urgency=low * lm-sensors.preinst: make sure that the directory exists before trying to remove them (closes: bug#518976). -- Aurelien Jarno Mon, 09 Mar 2009 19:48:36 +0100 lm-sensors-3 (1:3.1.0-1) unstable; urgency=low * New upstream version. * lm-sensors.fancontrol.init: remove pidfile on stop action (closes: bug#504304). * lm-sensors.fancontrol.init: decrease the stop/start time to 3 seconds (closes: bug#504379). * libsensors4.README.Debian: update. * libsensors4.symbols: new file. * lm-sensors.preinst: remove /etc/modprobe.d/i2c on install/upgrade (closes: bug#518111). * patches/06-sensors-detect-debian.patch: update. * patches/07-sensors-detect-fixes.patch: remove (merged upstream). * patches/07-sensors-detect-modprobe.conf.patch: new patch to create files with .conf extension in /etc/modprobe.d/. -- Aurelien Jarno Thu, 05 Mar 2009 01:30:18 +0100 lm-sensors-3 (1:3.0.2-2) unstable; urgency=low * Remove stop links from rc0 and rc6 (closes: bug#495547). * Add a NEWS.Debian file from libsensors4 explaining how to generate /etc/sensors3.conf from /etc/sensors.conf (closes: bug#496703). * Bumped Standards-version to 3.8.0 - Add debian/README.source -- Aurelien Jarno Thu, 04 Sep 2008 12:40:12 +0200 lm-sensors-3 (1:3.0.2-1) unstable; urgency=low * New upstream version. * Use quilt for patch management. -- Aurelien Jarno Wed, 21 May 2008 17:57:23 +0200 lm-sensors-3 (1:3.0.1-5) unstable; urgency=low * /etc/init.d/fancontrol: use --startas instead of --exec. -- Aurelien Jarno Thu, 17 Apr 2008 00:03:27 +0200 lm-sensors-3 (1:3.0.1-4) unstable; urgency=low * Fix labels/compute/set override (closes: bug#474596). -- Aurelien Jarno Sun, 13 Apr 2008 01:15:52 +0200 lm-sensors-3 (1:3.0.1-3) unstable; urgency=low * Remove /etc/modutils/i2c in preinst script (closes: bug#470611). * Parse the configuration file in C locale (closes: bug#469333). -- Aurelien Jarno Tue, 18 Mar 2008 17:23:40 +0100 lm-sensors-3 (1:3.0.1-2) unstable; urgency=medium * Don't try to convert the configuration file from version 2, let the user do this task (closes: bug#468862, bug#467056). * Suggest i2c-tools instead of i2c (closes: bug#460997). * Rework debian/copyright. * Add an iniscript for fancontrol (closes: bug#400770). * Set minimum load average value to 0 in sensord (closes: bug#446313). -- Aurelien Jarno Sun, 02 Mar 2008 22:24:39 +0100 lm-sensors-3 (1:3.0.1-1) unstable; urgency=low * New upstream version. * Make /etc/init.d/lm-sensors LSB compliant. -- Aurelien Jarno Thu, 31 Jan 2008 18:03:33 +0100 lm-sensors-3 (1:3.0.0-5) unstable; urgency=low * Move sensors3.conf file to libsensors4. * Only convert /etc/sensors.conf into /etc/sensors3.conf if the former has been modified. Otherwise, install the default file. * Fix voltage value references in compute statements in the default configuration file and in the configuration file converter (closes: bug#456774). -- Aurelien Jarno Thu, 03 Jan 2008 11:11:02 +0100 lm-sensors-3 (1:3.0.0-4) unstable; urgency=medium * Apply upstream fix for sensord. -- Aurelien Jarno Tue, 11 Dec 2007 15:14:10 +0100 lm-sensors-3 (1:3.0.0-3) unstable; urgency=low * Ship sensors-detect in the lm-sensors package (closes: bug#454528). -- Aurelien Jarno Fri, 07 Dec 2007 00:53:24 +0100 lm-sensors-3 (1:3.0.0-2) unstable; urgency=low * Only install isaset and isadump on i386 and amd64. -- Aurelien Jarno Mon, 03 Dec 2007 22:51:33 +0100 lm-sensors-3 (1:3.0.0-1) unstable; urgency=low * New upstream version. -- Aurelien Jarno Tue, 27 Nov 2007 12:35:24 +0100 lm-sensors (1:2.10.5-2) unstable; urgency=low * Fix sensors-detect (closes: bug#451296). -- Aurelien Jarno Wed, 14 Nov 2007 22:19:59 +0100 lm-sensors (1:2.10.5-1) unstable; urgency=low * New upstream release. -- Aurelien Jarno Mon, 12 Nov 2007 15:12:28 +0100 lm-sensors (1:2.10.4-3) unstable; urgency=low * Don't print an error message if the die-code entry does not exists. (closes: bug#443060). -- Aurelien Jarno Mon, 24 Sep 2007 10:27:34 +0200 lm-sensors (1:2.10.4-2) unstable; urgency=low * pwmconfig: reprint the prompt each time (closes: bug#400609). -- Aurelien Jarno Wed, 12 Sep 2007 17:30:06 +0200 lm-sensors (1:2.10.4-1) unstable; urgency=low * New upstream release. * Use dh_installmodules with -n (closes: bug#432413). * Remove "ASUS rumors" from the default configuration files (closes: bug#426128). * Remove the 2.4 kernel part from the description (closes: bug#432969). -- Aurelien Jarno Fri, 20 Jul 2007 15:47:11 +0200 lm-sensors (1:2.10.3-1) unstable; urgency=low * New upstream release. * debian/lm-sensors.init, debian/sensord.init: add lsb header. -- Aurelien Jarno Fri, 04 May 2007 02:22:30 +0200 lm-sensors (1:2.10.1-3) unstable; urgency=medium * Update upstream URL. -- Aurelien Jarno Mon, 5 Mar 2007 01:38:06 +0100 lm-sensors (1:2.10.1-2) unstable; urgency=low * libsensors3: don't source debconf from postinst (closes: bug#390034). -- Aurelien Jarno Fri, 29 Sep 2006 01:46:58 +0200 lm-sensors (1:2.10.1-1) unstable; urgency=low * New upstream version. * Dropped debconf notes. I just hope the users won't report too much bugs as experience has shown that a lot of users are not capable of reading /usr/share/doc/.../README.Debian (closes: bug#388522, bug#388918). -- Aurelien Jarno Tue, 26 Sep 2006 00:30:08 +0200 lm-sensors (1:2.10.0-9) unstable; urgency=low * Remove the dependency on sysvinit (Closes: bug#386133). * Add to libsensors3.README.Debian that 2.4 kernels are deprecated. * Drop the recommends on linux-image-2.6 | lm-sensors-source as users are supposed to use 2.6 kernels. -- Aurelien Jarno Tue, 5 Sep 2006 16:21:03 +0200 lm-sensors (1:2.10.0-8) unstable; urgency=medium * 2.4 kernels are deprecated, stop building lm-sensors-source and kernel-patch-2.4-lm-sensors (Closes: bug#385279). * Disable lm85 /sys entries that while be introduced in 2.6.19+ kernels (Closes: #372740). -- Aurelien Jarno Wed, 30 Aug 2006 12:05:15 +0200 lm-sensors (1:2.10.0-7) unstable; urgency=low * Fixed a typo in mkpatch.pl: s/71085/71805/ (Closes: bug#369506). -- Aurelien Jarno Wed, 31 May 2006 06:42:33 +0200 lm-sensors (1:2.10.0-6) unstable; urgency=low * Change the dependency from makedev | devfsd to makedev | udev. * Bumped Standards-version to 3.7.2 (No changes). -- Aurelien Jarno Mon, 29 May 2006 00:16:50 +0200 lm-sensors (1:2.10.0-5) unstable; urgency=low * 2.4 kernels are deprecated, stop building the modules on i386. * Added Galician debconf translation, thanks to Jacobo Tarrio (closes: bug#362138). -- Aurelien Jarno Wed, 12 Apr 2006 15:49:45 +0200 lm-sensors (1:2.10.0-4) unstable; urgency=low * Update Russian debconf translation, thanks to Yuri Kozlov (closes: bug#360962). -- Aurelien Jarno Thu, 6 Apr 2006 17:23:14 +0200 lm-sensors (1:2.10.0-3) unstable; urgency=low * Move the startup script from position 35 to position 47, so that it is called after mountnfs (closes: bug#356195). -- Aurelien Jarno Fri, 24 Mar 2006 22:50:44 +0100 lm-sensors (1:2.10.0-2) unstable; urgency=low * Rebuild against libsysfs2. -- Aurelien Jarno Sun, 5 Mar 2006 13:58:25 +0100 lm-sensors (1:2.10.0-1) unstable; urgency=low * New upstream version. * Added Danish debconf translation, thanks to Claus Hindsgaul (closes: bug#352062). -- Aurelien Jarno Wed, 15 Feb 2006 12:34:13 +0100 lm-sensors (1:2.9.2-8) unstable; urgency=low * Fixed udev detection (closes: bug#350404). -- Aurelien Jarno Sun, 29 Jan 2006 23:07:25 +0100 lm-sensors (1:2.9.2-7) unstable; urgency=low * Added a note about sensors limits in /usr/share/doc/sensord/README.Debian (closes: bug#336613). -- Aurelien Jarno Wed, 21 Dec 2005 01:26:25 +0100 lm-sensors (1:2.9.2-6) unstable; urgency=low * Fixed Suggests line: s/ inux/linux/g (closes: bug#340614). * Fixed FSF address in copyright file. -- Aurelien Jarno Thu, 24 Nov 2005 20:10:31 +0100 lm-sensors (1:2.9.2-5) unstable; urgency=low * Also recommends linux-image-2.6 as an alternative to kernel-image-2.6, as aptitude is a bit dumb and can't cope with the current recommends line (closes: bug#335746). -- Aurelien Jarno Wed, 26 Oct 2005 02:36:08 +0200 lm-sensors (1:2.9.2-4) unstable; urgency=low * Moved README.Debian from the lm-sensors package to the libsensors3 package (closes: bug#333323). -- Aurelien Jarno Tue, 11 Oct 2005 13:42:48 +0200 lm-sensors (1:2.9.2-3) unstable; urgency=low * Added Swedish debconf translation. Thanks to Daniel Nylander (closes: bug#330823). -- Aurelien Jarno Mon, 3 Oct 2005 00:31:22 +0200 lm-sensors (1:2.9.2-2) unstable; urgency=low * The conflict between i2c-viapro and via686a modules has been fixed in kernel 2.6.10. As the problem is not present anymore in kernels shipped by Debian, don' blacklist i2c-viapro anymore. -- Aurelien Jarno Wed, 21 Sep 2005 15:24:28 +0200 lm-sensors (1:2.9.2-1) unstable; urgency=low * New upstream version. * Fixed the detection of RAM in sensord (closes: bug#328268). * Dropped the debconf note about upgrading from version < 2.7 as woody -> etch upgrades are not supported. -- Aurelien Jarno Wed, 7 Sep 2005 16:01:38 +0200 lm-sensors (1:2.9.1-7) unstable; urgency=high * Urgency set to high due to security fix. * Fixed and insecure tempfile usage in pwmconfig. Thanks to Javier Fernández-Sanguino Peña for the bug report and the patch (closes: bug#324193). -- Aurelien Jarno Sat, 20 Aug 2005 22:12:54 +0200 lm-sensors (1:2.9.1-6) unstable; urgency=low * Changed librrd0-dev into librrd2-dev in the build-dependencies (closes: bug#323650). -- Aurelien Jarno Wed, 17 Aug 2005 22:01:36 +0200 lm-sensors (1:2.9.1-5) unstable; urgency=low * Explain why gcc-3.3 is used to build modules in /usr/share/doc/lm-sensors-source/README.Debian. -- Aurelien Jarno Mon, 1 Aug 2005 01:16:47 +0200 lm-sensors (1:2.9.1-4) unstable; urgency=low * Build the modules with gcc-3.3 -- Aurelien Jarno Fri, 8 Jul 2005 11:24:06 +0200 lm-sensors (1:2.9.1-3) unstable; urgency=low * Build-depends on debhelper (>= 4.9.3) to use a working dh_installmodules. * Bumped Standards-version to 3.6.2 (No changes). -- Aurelien Jarno Wed, 29 Jun 2005 07:33:17 +0200 lm-sensors (1:2.9.1-2) unstable; urgency=low * Added Vietnamese debconf translation. Thanks to Clytie Siddall (closes: bug#312510). * Fixed a typo in the debconf template. Thanks to Clytie Siddall (closes: bug#312511). -- Aurelien Jarno Thu, 9 Jun 2005 01:17:29 +0200 lm-sensors (1:2.9.1-1) unstable; urgency=low * New upstream version. -- Aurelien Jarno Fri, 15 Apr 2005 07:33:35 +0200 lm-sensors (1:2.9.0-19) unstable; urgency=medium * Patch pulled from CVS: read /etc/udev.conf to know how to detect the presence of udev. -- Aurelien Jarno Mon, 28 Mar 2005 23:02:35 +0200 lm-sensors (1:2.9.0-18) unstable; urgency=medium * Also detect udev with /dev/.udevdb (closes: bug#299563). -- Aurelien Jarno Tue, 15 Mar 2005 10:47:49 +0100 lm-sensors (1:2.9.0-17) unstable; urgency=high * Don't build p4b_smbus.o on non-x86 machines -- Aurelien Jarno Thu, 10 Mar 2005 02:14:57 +0100 lm-sensors (1:2.9.0-16) unstable; urgency=high * Rebuilt against latest i2c-source. * Conflicts with current i2c modules. -- Aurelien Jarno Wed, 9 Mar 2005 20:32:13 +0100 lm-sensors (1:2.9.0-15) unstable; urgency=low * Added support for it8712 in sensord (closes: bug#298168). -- Aurelien Jarno Sun, 6 Mar 2005 00:57:07 +0100 lm-sensors (1:2.9.0-14) unstable; urgency=low * Remove wrong installed file /etc/blacklist.d/lm-sensors and the associated directory in preinst (closes: bug#295519). -- Aurelien Jarno Wed, 16 Feb 2005 18:39:16 +0100 lm-sensors (1:2.9.0-13) unstable; urgency=low * Disable error message of /etc/init.d/sensors is monitoring modules are not loaded (closes: bug#295160). -- Aurelien Jarno Mon, 14 Feb 2005 07:44:50 +0100 lm-sensors (1:2.9.0-12) unstable; urgency=medium * Fixed location of hotplug's blacklist directory. -- Aurelien Jarno Tue, 8 Feb 2005 01:07:03 +0100 lm-sensors (1:2.9.0-11) unstable; urgency=low * Fixed a bad UTF-8 character in fancontrol(8). -- Aurelien Jarno Fri, 28 Jan 2005 00:22:01 +0100 lm-sensors (1:2.9.0-10) unstable; urgency=low * Added export-objs-target for amd756 in mkpatch.pl (closes: bug#292096). * Replaced the patch about the temp file creation by the upstream one. Basically it uses mktemp instead of tempfile, as the former seems to be more common. * Added manpage for pwmconfig and fancontrol. They were also sent upstream and will be included in the next version of lm-sensors. * Pulled support for sis5595 2.6 kernel driver from CVS. -- Aurelien Jarno Thu, 27 Jan 2005 01:58:19 +0100 lm-sensors (1:2.9.0-9) unstable; urgency=high * Applied a patch from Javier Fernández-Sanguino Peña to fix an insecure temp file creation (closes: bug#291957). -- Aurelien Jarno Mon, 24 Jan 2005 13:45:23 +0100 lm-sensors (1:2.9.0-8) unstable; urgency=low * Fixed copyright (closes: bug#290204). -- Aurelien Jarno Thu, 13 Jan 2005 08:09:58 +0100 lm-sensors (1:2.9.0-7) unstable; urgency=low * Build against kernel 2.4.27-2 (closes: bug#289913). * Explain that the loadavg is not scaled anymore by sensord in NEWS (closes: bug#289921). -- Aurelien Jarno Tue, 11 Jan 2005 22:38:17 +0100 lm-sensors (1:2.9.0-6) unstable; urgency=low * Fixed a typo in sensors-detect (closes: bug#289871). -- Aurelien Jarno Tue, 11 Jan 2005 17:25:46 +0100 lm-sensors (1:2.9.0-5) unstable; urgency=medium * Added a note to the FAQ and to sensors-detect about via686a and i2c-viapro conflict. * Prevent this module to be automatically loaded by hotplug. * Closes: bug#289798. -- Aurelien Jarno Tue, 11 Jan 2005 12:12:34 +0100 lm-sensors (1:2.9.0-4) unstable; urgency=high * Urgency set to high as it may hold KDE security update into sid. * Fixed display of error message in sensord (closes: bug#288671). -- Aurelien Jarno Wed, 5 Jan 2005 22:30:26 +0100 lm-sensors (1:2.9.0-3) unstable; urgency=low * Changed all call to dh_ from -a to -s. -- Aurelien Jarno Mon, 3 Jan 2005 03:01:05 +0100 lm-sensors (1:2.9.0-2) unstable; urgency=low * Removed build rules. -- Aurelien Jarno Mon, 3 Jan 2005 00:23:03 +0100 lm-sensors (1:2.9.0-1) unstable; urgency=medium * New upstream version. * The upstream has restore compatibility with 2.4 kernels, so having lm-sensors and lm-sensors-old in Debian is not necessary anymore. * Generate lm-sensors-source and lm-sensors-2.4* modules from this package instead of lm-sensors-old. * Fixed README.Debian file (closes: bug#286045). * Fixed package name for module assistant (closes: bug#287558). -- Aurelien Jarno Sun, 2 Jan 2005 19:31:29 +0100 lm-sensors (2.8.8-7) unstable; urgency=high * Fixed kernel version detection (closes: bug#280828, bug#282406). -- Aurelien Jarno Mon, 22 Nov 2004 10:43:40 +0000 lm-sensors (2.8.8-6) unstable; urgency=low * Only install isaset on i386 arches. -- Aurelien Jarno Wed, 17 Nov 2004 13:21:15 +0000 lm-sensors (2.8.8-5) unstable; urgency=low * Also install /usr/bin/isaset and the corresponding manpage. -- Aurelien Jarno Wed, 17 Nov 2004 00:34:52 +0100 lm-sensors (2.8.8-4) unstable; urgency=low * Fixed de debconf translation (really closes: bug#280997). -- Aurelien Jarno Sun, 14 Nov 2004 21:37:58 +0100 lm-sensors (2.8.8-3) unstable; urgency=low * Updated de debconf translation. Thanks to Erik Schanze (closes: bug#280997). -- Aurelien Jarno Sun, 14 Nov 2004 21:37:56 +0100 lm-sensors (2.8.8-2) unstable; urgency=high * Fixed the output of sensors-detect which was not printing the modules to load. -- Aurelien Jarno Wed, 10 Nov 2004 21:13:28 +0000 lm-sensors (2.8.8-1) unstable; urgency=low * New upstream version. -- Aurelien Jarno Fri, 8 Oct 2004 21:09:17 +0200 lm-sensors (2.8.7-8) unstable; urgency=high * Removed patch generation for kernels 2.4.24 to 2.4.26 (closes: bug#271248). * sensors-detect: automatically adds line to /etc/modules if the user wants to (closes: bug#266227). * Urgency set to high as this bug affects sarge. -- Aurelien Jarno Mon, 13 Sep 2004 14:33:27 +0200 lm-sensors (2.8.7-7) unstable; urgency=high * Depends on sed (>= 4.0.5-1) (closes: bug#267213). * Removed useless debconf note (closes: bug#268285). * Updated fr, cs and it debconf translations (closes: bug#268146, #268570, #268683). -- Aurelien Jarno Tue, 31 Aug 2004 01:10:14 +0200 lm-sensors (2.8.7-6) unstable; urgency=low * Fixed a typo in sensors-detect (closes: bug#266966). -- Aurelien Jarno Fri, 20 Aug 2004 00:18:36 +0200 lm-sensors (2.8.7-5) unstable; urgency=low * Don't fail if the debconf note has already been seen. -- Aurelien Jarno Thu, 19 Aug 2004 23:32:55 +0200 lm-sensors (2.8.7-4) unstable; urgency=low * Fixed a typo in postinst. -- Aurelien Jarno Thu, 19 Aug 2004 17:34:22 +0200 lm-sensors (2.8.7-3) unstable; urgency=high * Added patch generation for kernel 2.4.27 * Urgency set to high as 2.4.27 is shipped with Sarge. * The previous patch to sensors-detect was erroneous. Fixed. * Don't run sensors -s on install. The user hasn't run sensors-detect at that time. * Suggests: read-edid (closes: bug#265890). * Add a debconf note to explain how to configure lm-sensors (closes: bug#266227). * Depends on sysvinit to make sure /sys is mounted (closes: bug#266227). -- Aurelien Jarno Thu, 19 Aug 2004 15:55:55 +0200 lm-sensors (2.8.7-2) unstable; urgency=medium * /usr/sbin/sensors-detect: don't check for i2c device node when using udev. They will be created when the module is loaded (closes: bug#254556). * Updated Brazilian debconf translation. Thanks to Andre Luis Lopes (closes: bug#264216). * Updated Dutch debconf translation. Thanks to Cobaco (closes: bug#260292). -- Aurelien Jarno Sun, 8 Aug 2004 01:33:44 +0200 lm-sensors (2.8.7-1) unstable; urgency=low * New upstream version. * sensors-detect: display instructions depending on the kernel version (closes: bug#253892). -- Aurelien Jarno Sat, 12 Jun 2004 00:03:00 +0200 lm-sensors (2.8.6-13) unstable; urgency=low * Added Italian debconf translation. Thanks to Luca Monducci (closes: bug#251739). * Removed patch generation for kernels 2.4.19, 2.4.20, 2.4.21 and 2.4.22 as they have been removed from Debian. -- Aurelien Jarno Mon, 31 May 2004 22:45:50 +0200 lm-sensors (2.8.6-12) unstable; urgency=low * Added Catalan debconf translation. Thanks to Aleix Badia i Bosch (closes: bug#250112). -- Aurelien Jarno Fri, 28 May 2004 13:33:00 +0200 lm-sensors (2.8.6-11) unstable; urgency=low * Added Czech debconf translation. Thanks to Marcel Sebek (closes: bug#249284). * Don't install /etc/modprobe.d/i2c. Its contents is already provided by module-init-tools (closes: bug#249097). -- Aurelien Jarno Mon, 17 May 2004 12:39:39 +0200 lm-sensors (2.8.6-10) unstable; urgency=low * Added some clarification to README.Debian about i2c-proc. * Added and example on how to enable/disable beep into /etc/sensors.conf (closes: bug#99665). -- Aurelien Jarno Mon, 10 May 2004 00:05:14 +0200 lm-sensors (2.8.6-9) unstable; urgency=low * Invert beep bits for the AS99127F in the driver instead of in userspace tools. If you are using prebuilt modules, use a version >= 2.7.0-9. If you are using a 2.6 kernel, the fix would be included in the kernel soon, problably in version 2.6.7. Meanwhile, you can use that patch: http://archives.andrew.net.au/lm-sensors/msg07760.html (closes: bug#209299). * Fixed devfs detection in sensors-detect (closes: bug#247719). * Correctly display beep settings on w83781d chips (closes: bug#121832). * Dont Build-Depends on make, it is an essential package. -- Aurelien Jarno Fri, 7 May 2004 10:42:23 +0200 lm-sensors (2.8.6-8) unstable; urgency=low * Updated French debconf translation. Thanks to Michel Grentzinger (closes: bug#246812). * Added a patch which also in the CVS to disable the average in RRD (closes: bug#244034). -- Aurelien Jarno Sat, 1 May 2004 20:56:31 +0200 lm-sensors (2.8.6-7) unstable; urgency=medium * Removed Thinkpad warning. All the combination possible in Debian with modules and userspace tools are considered to be safe (closes: bug#246674). -- Aurelien Jarno Sat, 1 May 2004 11:57:54 +0200 lm-sensors (2.8.6-6) unstable; urgency=low * Added patch for kernel 2.4.26 into kernel-patch-2.4-lm-sensors. * Updated Japanese debconf translation. Thanks to Kenshi Muto (closes: bug#245423). -- Aurelien Jarno Fri, 23 Apr 2004 10:10:57 +0200 lm-sensors (2.8.6-5) unstable; urgency=low * Read the values once after setting the limits (closes: bug#244129). -- Aurelien Jarno Fri, 16 Apr 2004 23:52:25 +0200 lm-sensors (2.8.6-4) unstable; urgency=low * Added a note for people upgrading from a version prior to 2.6.3 telling that the comparison of negatives has changed (closes: bug#145235). * Mentioned the kernel config parameter SYSCTL in case /proc/sys is not found (closes: bug#200966). * Added details to /etc/sensors.conf for Abit BP6 motherboard (closes: bug#57912). * Included support for Nvidia Nforce2 based mainboard into the kernel patch (closes: bug#243930). -- Aurelien Jarno Fri, 16 Apr 2004 13:22:16 +0200 lm-sensors (2.8.6-3) unstable; urgency=critical * Pass --debconf-ok option to ucf (closes: bug#243815, #243818). -- Aurelien Jarno Thu, 15 Apr 2004 00:44:36 +0200 lm-sensors (2.8.6-2) unstable; urgency=critical * Set urgency to critical, as the current version breaks upgrade in testing. * Moved back libsensors.3 to libsensors-dev (closes: bug#243746). * Make libsensors-dev conflicts with libsensors3 (<= 2.8.6-1). -- Aurelien Jarno Wed, 14 Apr 2004 23:12:11 +0200 lm-sensors (2.8.6-1) unstable; urgency=medium * New upstream version (closes: #243025): - Fixed in7 and fan3 for it87 chips in sensord (closes: bug#231699). - Support for 2.6.5 and later kernels (closes: bug#242296). * Display a message if sensors support is not enabled (closes: bug#64042). * Display a message if running kernel older than 2.6.5. -- Aurelien Jarno Tue, 13 Apr 2004 17:16:12 +0200 lm-sensors (2.8.5-4) unstable; urgency=low * Provide a new package that contains patch for lm-sensors against 2.4 kernels (closes: bug#238437). * Don't pass -n option to the second echo in /etc/init.d/lm-sensors (closes: bug#238429). * Install a modutils file in /etc/{modprobe.d,modutils}. -- Aurelien Jarno Fri, 19 Mar 2004 08:59:40 +0100 lm-sensors (2.8.5-3) unstable; urgency=low * Removed dependency on dmidecode as it is not need anymore since lm-sensors 2.8.2. * Patch from CVS: fix segfault that occurs with -a -r parameters with an empty rrd file (closes: bug#201605). * Added pwmconfig and fancontrol to debian/lm-sensors.install (closes: bug#237913). * Added a patch to display the degree sign in the current locale (closes: bug#160737, #178510). * Removed a broken URL from the FAQ (closes: bug#99664). -- Aurelien Jarno Mon, 15 Mar 2004 07:26:27 +0100 lm-sensors (2.8.5-2) unstable; urgency=high * Urgency set to high as we really need to have this package in Sarge. * Only build isadump on x86 architectures. * Manage /etc/sensors.conf with ucf (closes: bug#237780). * Fixed sensord.8 (closes: bug#234588). -- Aurelien Jarno Sat, 13 Mar 2004 17:18:01 +0100 lm-sensors (2.8.5-1) unstable; urgency=low * New upstream version. * Fixed manpage (closes: bug#99657). * Create i2c-* devices only if need. Dropped debconf message (closes: bug#231011). * Moved call to 'sensors -s' from sensord initscript to lm-sensors initscript (closes: bug#115043). -- Aurelien Jarno Sat, 6 Mar 2004 09:32:18 +0100 lm-sensors (2.8.4-1) unstable; urgency=low * New maintainer (closes: #219172). * New upstream version. - sysfs support (Closes: #207012, #224884, #223884). * Removed code to build modules from debian/rules. * Don't put INSTALL in /usr/share/doc/lm-sensors anymore. * Have libsensors3 suggests lm-sensors-mod-2.7 | kernel-image-2.6 * Fixed typo in sensors-detect(8). (Closes: #219838). -- Aurelien Jarno Fri, 27 Feb 2004 13:54:52 +0100 lm-sensors (2.8.1-2) unstable; urgency=low * Use the standalone dmidecode package, which has a newer dmidecode than what lm-sensors includes. * Standards-version 3.6.1.0. (No changes) * Fix sensors-detect to work if we're using devfs, but no i2c bus driver is loaded. -- David Z Maze Sat, 15 Nov 2003 11:45:16 -0500 lm-sensors (2.8.1-1) unstable; urgency=low * New upstream release. Modified sensord source to build against newer DDCMON IDs. (Closes: #208385, #219601) * Update debian/rules to call i2ccheck.pl via perl, so it doesn't matter whether or not that script is executable. (Closes: #215301) * Have libsensors2 only Suggests: lm-sensors-mod-2.8, rather than Recommends: it. The main lm-sensors package still Recommends: the kernel modules. This is so that other things can depend on the library package (of present note, libsnmp) without aptitude trying to drag in a kernel module and probably also a new kernel. (Closes: #216093) * Updated Russian Debconf translation. (Closes: #214338, #219260) * Add Japanese Debconf translation; thanks to Kenshi Muto. (Closes: #211955) * Don't build kernel modules, since building i2c modules conflicts with things in the kernel and we'd otherwise depend on those. -- David Z Maze Sun, 9 Nov 2003 20:03:48 -0500 lm-sensors (2.8.0-2) unstable; urgency=low * Build vs. kernel 2.4.22-1. * Make sure libsensors.so points at libsensors.so.2. (Closes: #209389) -- David Z Maze Sat, 27 Sep 2003 18:03:54 -0400 lm-sensors (2.8.0-1) unstable; urgency=low * New upstream release. The modules ABI changed, so you need both i2c and lm-sensors 2.8.0 modules, not in-kernel modules. Upstream also changed the libsensors soname. (Closes: #183751, #202154) * Build vs. kernel 2.4.21-4. * Add Dutch debconf translation, from Bart Cornelis . (Closes: #205354) -- David Z Maze Mon, 1 Sep 2003 10:11:25 -0400 lm-sensors (2.7.0-6) unstable; urgency=low * Make the libsensors.so link in libsensors-dev point at the right place, libsensors.so.1.debian.1. * Add Portugese (Brazilian) debconf translation, from Andre Luis Lopes . (Closes: #198259) * Add French debconf translation, from Michel Grentzinger . (Closes: #197309) * Get Perl dependencies correct, using dh_perl. (Closes: #196237) -- David Z Maze Sun, 22 Jun 2003 15:10:50 -0400 lm-sensors (2.7.0-5) unstable; urgency=low * Build vs. kernel 2.4.20-3. -- David Z Maze Mon, 2 Jun 2003 11:26:11 -0400 lm-sensors (2.7.0-4) unstable; urgency=low * Rename libsensors.so.1 to libsensors.so.1.debian.1, and change the package name to libsensors1. This due to a change in the library ABI upstream which isn't reflected in an soname change. (Closes: #191572, #193082) -- David Z Maze Tue, 20 May 2003 19:15:34 -0400 lm-sensors (2.7.0-3) unstable; urgency=low * Make libsensors-dev depend on exact version of libsensors1. (Addressing #191572.) * Move libsensors-dev to section libdevel. * Use debhelper 4 everywhere. In the process, stop calling dh_undocumented. * Convert to po-debconf. -- David Z Maze Thu, 1 May 2003 23:31:05 -0400 lm-sensors (2.7.0-2) unstable; urgency=low * Build vs. kernel 2.4.20-1. * Update to policy 3.5.9.0 (no changes). -- David Z Maze Sun, 13 Apr 2003 15:17:16 -0400 lm-sensors (2.7.0-1) unstable; urgency=low * New upstream release. This depends on version 2.7.0 of i2c, which means that it can't use the in-kernel drivers. * Take proposed changes from upstream to make logging to a round-robin database an option in /etc/default/sensord. -- David Z Maze Wed, 1 Jan 2003 20:15:57 -0500 lm-sensors (2.6.5-5) unstable; urgency=low * Automatically build kernel modules for kernel 2.4.20, doing deep black magic to figure out what flavors exist. * Patch the upstream Makefile to only check include/linux/autoconf.h to see if a kernel is SMP or not, don't look in the kernel's Makefile. (Important since kernel-build-* doesn't include the Makefile; also differently addresses #132394.) * Hopefully this will work for all architectures and all of the stock kernels. *crosses fingers* -- David Z Maze Wed, 11 Dec 2002 18:36:36 -0500 lm-sensors (2.6.5-4) unstable; urgency=low * Pass LINUX=$(KSRC) to 'make clean', to avoid trying to look in /usr/src/linux when we build modules. (Closes: #132394) * Updated to standards-version 3.5.8.0. No longer ask permission to create i2c devices. -- David Z Maze Fri, 6 Dec 2002 21:24:15 -0500 lm-sensors (2.6.5-3) unstable; urgency=low * Pulled forward some changes from upstream. (I wish cvs-buildpackage dealt better with this; I think it's CVS' fault.) Updated debian/rules to correctly deal with the newer makefile. * Put kernel modules in /lib/modules/$KVERS/lm-sensors, not misc. -- David Z Maze Sun, 24 Nov 2002 12:01:48 -0500 lm-sensors (2.6.5-2) unstable; urgency=low * Make kernel-package rules understand $(ROOT_CMD). (Closes: #161799) * Correctly separated out building (arch-dependent) binary packages from (arch-all) module source in debian/rules. * Add 'debian/rules modules-nokpkg' to build and install kernel modules locally without building a package, since the working 'make' invocation is kind of gross. Suggest using it in lm-sensors-source's README.Debian file. This addresses the concern brought out by #165508, though it doesn't actually make the requested change. -- David Z Maze Tue, 12 Nov 2002 00:09:53 -0500 lm-sensors (2.6.5-1) unstable; urgency=low * New upstream version. (Closes: #157121, #161058) -- David Z Maze Thu, 31 Oct 2002 22:58:08 -0500 lm-sensors (2.6.4-3) unstable; urgency=low * Document the cause of a "no rule to make target `rrd.h'" error, namely ignoring the instructions in README.Debian and blindly running make. (Closes: #157240) * Change from being an i386-only package to being Architecture: any (or all for lm-sensors-source); claims that this will work on at least PPC, MIPS, and ARM. -- David Z Maze Mon, 19 Aug 2002 09:52:38 -0400 lm-sensors (2.6.4-2) unstable; urgency=low * The "'Recursive Make Considered Harmful' Considered Harmful" release. * When building kernel modules, only pay attention to the directories needed to do said build; don't try to bring in dependencies from the user-space utilities. (Closes: #155430) -- David Z Maze Tue, 6 Aug 2002 13:15:01 -0400 lm-sensors (2.6.4-1) unstable; urgency=low * New upstream release. (Closes: #155077, #154874) * The Debian diff for the sensors-detect script was huge. Merge in a lot of changes the upstream made; this should make the script able to detect a lot more hardware. The diff is back down to not generating an /etc/sysconfig script and outputting data for /etc/modules. (Closes: #147831) * Cause dh_clean to be called with the module tree's debian/control file, resulting in module build directories getting cleaned properly too. (Closes: #116696) -- David Z Maze Sun, 4 Aug 2002 11:19:12 -0400 lm-sensors (2.6.3-5) unstable; urgency=low * Okay, don't actually depend on the exact kernel version. (Herbert Xu claims the kernel ABI shouldn't change appreciably between kernel builds.) -- David Z Maze Tue, 16 Apr 2002 21:13:13 -0400 lm-sensors (2.6.3-4) unstable; urgency=low * Don't just Recommend the kernel we built against; Depend on it, and more precisely, depend on the exact version that was used. -- David Z Maze Mon, 15 Apr 2002 10:43:56 -0400 lm-sensors (2.6.3-3) unstable; urgency=low * Abandon genchanges.sh, and use debsign to sign the .changes file in 'debian/rules kdist'. This is the same change that was made to i2c. -- David Z Maze Sun, 14 Apr 2002 18:33:21 -0400 lm-sensors (2.6.3-2) unstable; urgency=low * Make the debconf question about creating /dev entries priority high, and have it default to true. (Closes: #142225) * Add a German translation of this question as well; thanks to Sebastian Feltel. (Closes: #119938) -- David Z Maze Wed, 10 Apr 2002 23:43:51 -0400 lm-sensors (2.6.3-1) unstable; urgency=low * New upstream release. * Added a helper script (i2ccheck.pl) to find the best version of i2c in between what's installed and what's in the kernel. Use that now. * The glaring debconf warning points users to README.thinkpad in lm-sensors-source; install that. (Closes: #110595) * Added Russian debconf template for lm-sensors... (Closes: #136597) * ...and for lm-sensors-source. Thanks to Ilgiz Kalmetev for these. (Closes: #136929) -- David Z Maze Tue, 2 Apr 2002 22:41:34 -0500 lm-sensors (2.6.2-1) unstable; urgency=low * New upstream release. (Closes: #122102) * Update lm-sensors README.Debian to be clearer about how to build the kernel modules. Mention that it's possible to use the i2c support in the kernel as of kernel 2.4.13. Update package descriptions, too. * No longer have the lm-sensors kernel modules depend on the matching i2c kernel modules. Still keep a suggests around, though. (Closes: #120554) * For now, disable checking for the existence of i2c modules headers when building lm-sensors modules. This should allow building the modules with only the kernel support, but if you have neither kernel support nor external modules, you'll lose oddly. Document this failure in the lm-sensors-source README.Debian; it should get fixed before too long. -- David Z Maze Mon, 3 Dec 2001 22:39:50 -0500 lm-sensors (2.6.1-3) unstable; urgency=low * Use the right check to see if we're using devfs or not. (Closes: #118404) -- David Z Maze Mon, 5 Nov 2001 22:29:42 -0500 lm-sensors (2.6.1-2) unstable; urgency=low * Ask before creating devices (via debconf), but only if we're not in a devfs world. (Closes: #111432) * Various clean-ups to make lintian happy once again. -- David Z Maze Sun, 4 Nov 2001 21:37:31 -0500 lm-sensors (2.6.1-1) unstable; urgency=low * New upstream release. Not that we support it, but patching 2.4.7 or newer kernels should work with this release. (Closes: #107774) -- David Z Maze Tue, 16 Oct 2001 10:58:21 -0400 lm-sensors (2.6.0-4) unstable; urgency=low * Eliminate duplicate dependencies on libsensors1. * Install extra utility programs (i2cdump, i2cset, isadump) with lm-sensors. * No longer have the source package conflict with suidmanager, since it no longer contains any non-standard permissions. * Update lm-sensors README.Debian to mention the dependency on i2c-source and known common problems. * Added German debconf template; thanks to Sebastian Feltel. (Closes: #106894) * lm-sensors now Recommends: (not just Suggests:) lm-sensors-mod. * 'debian/rules clean' no longer omits the kernel directories, so it should work even on the module source. This should clean up people's nasty problems building modules. (Closes: #108107, #109065) -- David Z Maze Mon, 27 Aug 2001 17:11:55 -0400 lm-sensors (2.6.0-3) unstable; urgency=low * Let definitions of MODULE_LOC in the environment override the default setting. (Fixes a problem reported on debian-user.) -- David Z Maze Sun, 15 Jul 2001 12:11:31 -0400 lm-sensors (2.6.0-2) unstable; urgency=low * Don't include /usr/src/modules or /usr/src/modules/lm-sensors in the lm-sensors-source package. (Apparently this causes conflicts with things like pcmcia, and it's not necessary any more.) (Closes: #103829) -- David Z Maze Sat, 7 Jul 2001 16:10:05 -0400 lm-sensors (2.6.0-1) unstable; urgency=low * New upstream release. This depends on the new upstream i2c as well. * !!! NOTE !!! Upstream claims this release will permanently fry IBM ThinkPads! * Don't print "modprobe" before lines going in /etc/modules in sensors-detect script. (Closes: #101934) * Run /usr/bin/sensors -s in /etc/init.d/sensord to initialize the sensor driver. (Closes: #92792), though not optimally. * Good news for bug 94697: i2c-voodoo3 no longer interacts with ddcmon. Bad news: it thinks it can talk to the eeprom driver, so there's pretty much the same symptom. :-( -- David Z Maze Fri, 6 Jul 2001 11:09:18 -0400 lm-sensors (2.5.4-15) unstable; urgency=low * Add a default for MODULE_LOC in debian/rules, and explain a little more about it in lm-sensors-source's README.Debian. -- David Z Maze Sat, 26 May 2001 11:33:24 -0400 lm-sensors (2.5.4-14) unstable; urgency=low * lm-sensors-source now depends on bison and flex. (Closes: #98409) * Check for common user errors when building modules. * Minor documentation updates. * Added logcheck ignore files to not listen to sensord syslog spew. (Closes: #98559) -- David Z Maze Sat, 26 May 2001 11:13:53 -0400 lm-sensors (2.5.4-13) unstable; urgency=low * New maintainer. (Closes: #93350) * lm-sensors now depends on makedev | devfsd, so that people using devfs don't necessarily need to have makedev installed. (Closes: #96309) * Don't unpack the source into /usr/src/modules directly; instead, build a tarball in /usr/src/lm-sensors.tar.gz. This is more consistent with what ALSA, OpenAFS, etc. do. * It was never correct to put the package out of the modules source into $(MODULE_LOC)/..; put the package in $(KSRC)/.. instead. (Closes: #94577) This also causes the package to not be lost under the root directory (half of #93545). * Build the correct makefile targets when building kernel modules. Without doing this, no modules get built. (Closes: #93545) * If the kernel has i2c support, use its i2c headers; otherwise, depend on having the i2c-modules-source package installed. There's not a good way to do this with dpkg dependencies. :-/ -- David Z Maze Mon, 14 May 2001 20:52:24 -0400 lm-sensors (2.5.4-12) unstable; urgency=low * Only build kernel modules in make-kpkg target; Closes: #89014 * Added a few more notes about i2c. * Use MODULE_LOC, although I can imagine no way on earth that it can be better than using ../ . Of course, the bug reporter didn't bother to explain his particular configuration, or show any type of log, or any type of useful information, so this may not actually Closes: #91828. That's their tough luck. * Orphaned the package. I'm tired of this monkey on my back. -- Joey Hess Sun, 8 Apr 2001 21:21:26 -0700 lm-sensors (2.5.4-11) unstable; urgency=low * Made the library package only recommend lm-sensors. You may want to install something like mrtgutils w/o dragging in all of lm-sensors. -- Joey Hess Tue, 3 Apr 2001 15:15:26 -0700 lm-sensors (2.5.4-10) unstable; urgency=low * Turned off -w in sensors-detect to shut it up when it finds non-hex values in /proc/bus/pci/devices. Closes: #87213 -- Joey Hess Wed, 14 Mar 2001 12:58:24 -0800 lm-sensors (2.5.4-9) unstable; urgency=low * Updated libsensors man page. * Made sensord stop spamming syslog every minute with debug messages. Closes: 88600 -- Joey Hess Mon, 5 Mar 2001 13:19:14 -0800 lm-sensors (2.5.4-8) unstable; urgency=low * New sensord package thanks to Merlin Hughes -- Joey Hess Fri, 9 Feb 2001 13:57:13 -0800 lm-sensors (2.5.4-7) unstable; urgency=low * Fixed override disparities. -- Joey Hess Wed, 31 Jan 2001 12:27:52 -0800 lm-sensors (2.5.4-6) unstable; urgency=low * Downgraded dependancy on i2c-source to a suggests, as it is in the 2.4.0 kernel. Closes: #83974 -- Joey Hess Tue, 30 Jan 2001 13:50:25 -0800 lm-sensors (2.5.4-5) unstable; urgency=low * statoverride transition. -- Joey Hess Wed, 10 Jan 2001 14:58:59 -0800 lm-sensors (2.5.4-4) unstable; urgency=low * Re-upload with full source, as: "Rejected: lm-sensors_2.5.4-3.dsc refers to lm-sensors_2.5.4.orig.tar.gz, but I can't find it in Incoming or in the pool." -- becuase lm-sensors_2.5.4-2.tar.gz somehow got uploaded. Yuck! * Added kdist_clean target, even though it is pretty useless -- the other kdist_ targets clean up after themselves. Closes: #81360 -- Joey Hess Sat, 6 Jan 2001 00:45:07 -0800 lm-sensors (2.5.4-2) unstable; urgency=low * README.Debian grammar fix, Closes: #80414 -- Joey Hess Wed, 3 Jan 2001 17:14:31 -0800 lm-sensors (2.5.4-1) unstable; urgency=low * New upstream release, which should fix build problems on recent 2.4pre kernels. -- Joey Hess Mon, 23 Oct 2000 11:51:57 -0700 lm-sensors (2.5.2-3) unstable; urgency=low * Removed CVS directories that snuck into the deb. -- Joey Hess Fri, 13 Oct 2000 01:26:57 -0400 lm-sensors (2.5.2-2) unstable; urgency=low * Moved lm-sensors binary package from section misc to section utils (well, the override filee will probably still need to be updated to follow suit, so I am actually going to reassign bug #74467 to ftp.d.o). -- Joey Hess Thu, 12 Oct 2000 11:11:08 -0400 lm-sensors (2.5.2-1) unstable; urgency=low * New upstream version. This version has known problems with the 2.4.0-test8 kernel. -- Joey Hess Thu, 21 Sep 2000 21:43:01 -0700 lm-sensors (2.5.0-10) unstable; urgency=low * Rebuilt (and build-dends on) debhelper 2.1.9. Earlier versions produced postinst/postrm files that did not work on systems with non-modular kernels. Closes: #64457 -- Joey Hess Tue, 19 Sep 2000 20:40:28 -0700 lm-sensors (2.5.0-9) unstable; urgency=low * Epoch and version number patch. Closes: #69522 -- Joey Hess Fri, 1 Sep 2000 16:42:59 -0700 lm-sensors (2.5.0-8) unstable; urgency=low * Quoted some text used inside a m// in sensors-detect. Closes: #69461 * Now depends on the current makedev package, which uses /dev/i2c-*, in complience with devices.txt and upstream, not /dev/i2c* that Debian used to use for some reason. I belive this Closes: #61670, #65381 * Note that this means that /dev/i2c0 and /dev/i2c1 will still be around after this upgrade. Policy says I cannot remove them; up to admin. So be it. -- Joey Hess Mon, 21 Aug 2000 12:13:14 -0700 lm-sensors (2.5.0-7) unstable; urgency=low * Type fix, Closes: #68415 -- Joey Hess Wed, 2 Aug 2000 13:40:01 -0700 lm-sensors (2.5.0-6) unstable; urgency=low * Applied most of a documentation patch by Josip Rodin. Killed the bit about chowning the tree to a user, that's what the src group is for. Closes: #65806 -- Joey Hess Sun, 18 Jun 2000 20:25:59 -0700 lm-sensors (2.5.0-5) unstable; urgency=low * The source package now installs everything owned by root.src, and directories are 2755. This is to mirror the standard permissions of /usr/src. -- Joey Hess Wed, 14 Jun 2000 20:48:50 -0700 lm-sensors (2.5.0-4) unstable; urgency=low * Build .deb in $(KSRC)/.., not $(MOD_DIR)/.. I started using the latter by accident in the last release. -- Joey Hess Tue, 23 May 2000 11:54:13 -0700 lm-sensors (2.5.0-3) unstable; urgency=low * Shut up warnings about .d files, Closes: 64045 -- Joey Hess Tue, 16 May 2000 01:01:24 -0700 lm-sensors (2.5.0-2) unstable; urgency=low * Listed the (many) authors in debian/copyright. Closes: #64082 * Enhanced README.Debian in lm-sensors-source, based on the work of Josip Rodin. Closes: #64044 (Well, part of it anyway. I disagree with the other parts, amd if people want to file multipart bug reports, getting them closed like this is the price they pay for that convenience.) -- Joey Hess Mon, 15 May 2000 17:05:28 -0700 lm-sensors (2.5.0-1) unstable; urgency=low * Major new upstream release. Closes: #62362 * i2c stuff is split off into a separate package. Lots of changes for this. * Major code tree reogranaization, both upstream and in debian/ * The shared library is at soname 1 now. * Cleaned up the control file handling. * genchanges.sh now supports gpg. * lm-sensors install now runs MAKEDEV i2c for you. * lm-sensors-source uses dh_installmodules to handle maintainer scripts, and so depends on the latest version of debhelper, 2.0.96 -- Joey Hess Wed, 3 May 2000 13:25:41 -0700 lm-sensors (2.4.4-3) unstable; urgency=low * Corrected section and priority information to match the overrides file. -- Joey Hess Mon, 1 May 2000 21:12:59 -0700 lm-sensors (2.4.4-2) unstable; urgency=low * Removed bogus lm-sensor-mod Suggests lines. Closes: #63360, which Christian says is important. Hmm. -- Joey Hess Mon, 1 May 2000 10:02:37 -0700 lm-sensors (2.4.4-1) unstable; urgency=low * New upstream. -- Joey Hess Tue, 11 Jan 2000 16:14:22 -0800 lm-sensors (2.4.3-11) unstable; urgency=low * Updated link to kernel-package docs. Closes: #54604 -- Joey Hess Mon, 10 Jan 2000 16:43:41 -0800 lm-sensors (2.4.3-10) unstable; urgency=low * -dev package now includes .so link, Closes: #53500 -- Joey Hess Mon, 3 Jan 2000 16:19:59 -0800 lm-sensors (2.4.3-9) unstable; urgency=low * Patch from bug submitter to make it work if linux source is elsewhere than /usr/src/linux, Closes: #53888 -- Joey Hess Mon, 3 Jan 2000 12:04:06 -0800 lm-sensors (2.4.3-8) unstable; urgency=low * Fixed typo, Closes: #53408 -- Joey Hess Fri, 24 Dec 1999 11:25:43 -0800 lm-sensors (2.4.3-7) unstable; urgency=low * Fixed module build problem: always clean first. -- Joey Hess Sat, 18 Dec 1999 14:41:23 -0800 lm-sensors (2.4.3-6) unstable; urgency=low * New upstream version. Closes: #51893 -- Joey Hess Mon, 6 Dec 1999 16:08:25 -0800 lm-sensors (2.4.3-5) unstable; urgency=low * Build dependancies. * Don't build kernel modules when building the regular debian package. -- Joey Hess Sat, 4 Dec 1999 01:09:55 -0800 lm-sensors (2.4.3-4) unstable; urgency=low * Moved the modutils file to the lm-sensors package and made it a conffile. It doesn't make sense to put it in the modules package. -- Joey Hess Mon, 29 Nov 1999 15:38:13 -0800 lm-sensors (2.4.3-3) unstable; urgency=low * Fixed KDREV parsing, Closes: #50878 -- Joey Hess Sun, 21 Nov 1999 14:24:51 -0800 lm-sensors (2.4.3-2) unstable; urgency=low * If epoch is present in KDREV, slit it out and only use it in the right places. Closes: #49421 -- Joey Hess Thu, 18 Nov 1999 14:03:13 -0800 lm-sensors (2.4.3-1) unstable; urgency=low * New upstream version. Had to re-merge my changes, luckily, there were few. * Removed some junk directories that shouldn't be installed. -- Joey Hess Wed, 17 Nov 1999 20:06:07 -0800 lm-sensors (2.3.4-6) unstable; urgency=low * Corrected filename to /usr/share/kernel-package/README.modules, Closes: #46440 -- Joey Hess Sun, 3 Oct 1999 12:58:24 -0700 lm-sensors (2.3.4-5) unstable; urgency=low * Decreased maintainer script verbosity. -- Joey Hess Mon, 20 Sep 1999 15:39:31 -0700 lm-sensors (2.3.4-4) unstable; urgency=low * Fixed control file mispelling (Closes: #44830) -- Joey Hess Fri, 10 Sep 1999 18:52:00 -0700 lm-sensors (2.3.4-3) unstable; urgency=low * Add #DEBHELPER# to postrm. -- Joey Hess Mon, 6 Sep 1999 17:39:12 -0700 lm-sensors (2.3.4-2) unstable; urgency=low * Include kernel revision number in modules package version. Closes: #44110 -- Joey Hess Sat, 4 Sep 1999 00:41:36 -0700 lm-sensors (2.3.4-1) unstable; urgency=low * Fixed sensors-detect to use correct /dev filenames. Closes: #44084. * New upstream version. -- Joey Hess Fri, 3 Sep 1999 19:33:51 -0700 lm-sensors (2.3.2-2) unstable; urgency=low * Split out the library package properly. * Lintian clean except lm-sensors-source, which can't be. * Modified sensors-detect to print out debian-friendly instructions. * Added some more docs. -- Joey Hess Wed, 12 May 1999 14:42:05 -0700 lm-sensors (2.3.2-1) unstable; urgency=low * New maintainer. * New upstream release with many changes (completly rewritten). * Folded in patch from my NMU (#36567). - Generate a lm-sensors-source package now, which kernel-package can use to build packages that work with a given kernel. Dropped the pre-built module package. * Re-wrote all the package descriptions. * Generate a lm-sensors package with the shared lib and support programs in it. This may need to be split into a normal library and bin and dev package. * Fixed package names of modules packages to properly encode the kernel version. * Fixed lm-sensors-source postinst and postrm. * I still need to deal with some things, including a ton of lintian errors. Consider this a snapshot of a not-quite-done package. -- Joey Hess Tue, 11 May 1999 19:55:59 -0700 lm-sensors (1.4.11-2) unstable; urgency=low * No longer build as seperate modules. * Added -m elf_i386 back to link flags * Fixed makefile * Changed architecture to i386 -- Stephen Crowley Wed, 2 Dec 1998 23:28:06 -0600 lm-sensors (1.4.11-1) unstable; urgency=low * Removed -m elf_i386 from LDFLAGS * New upstream version. -- Stephen Crowley Mon, 30 Nov 1998 15:56:17 -0600 lm-sensors (1.4.10-1) unstable; urgency=low * New upstream version. -- Stephen Crowley Sun, 29 Nov 1998 22:11:02 -0600 lm-sensors (1.4.9-3) unstable; urgency=low * Added modules for 2.0.36 -- Stephen Crowley Wed, 18 Nov 1998 18:31:36 -0600 lm-sensors (1.4.9-2) unstable; urgency=low * Removed update-modules from postinst and postrm -- Stephen Crowley Sun, 8 Nov 1998 18:37:24 -0600 lm-sensors (1.4.9-1) unstable; urgency=low * Initial Release. -- Stephen Crowley Sun, 8 Nov 1998 00:18:25 -0600 Local variables: mode: debian-changelog End: