libfprint (1:1.90.7-2) unstable; urgency=medium
* debian/patches: Skip udev rules tests when not all drivers are compiled
* debian/libfprint-2-2.postinst: Regenerate the udev list based on new IDs
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 17:10:57 +0100
libfprint (1:1.90.7-1) unstable; urgency=medium
* New upstream release:
- vfs5011: Fix possible use-after-free
- goodixmoc: Add two new PIDs (0x63AC, 0x639C)
- goodixmoc: Support finger status API
- synaptics: Only identify within provided prints
- synaptics: Reject devices with old firmware during probe (#239)
* debian/patches:
- Refresh, dropping merged
- Include upstream udev fixes and use hardcoded rules
- Ensure that umockdev tests will pass with libusb 1.0.24
(Closes: #977848, #978256)
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 21 Jan 2021 13:38:59 +0100
libfprint (1:1.90.6-2) unstable; urgency=medium
* d/p/meson-Do-not-support-drivers-known-to-fail-in-Big-Endian-.patch:
- Do not enable drivers that are not supported by big endian archs
Upstream patch to only build drivers everywhere but not include them
in the supported list or test them
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 10 Dec 2020 21:32:49 +0100
libfprint (1:1.90.6-1) unstable; urgency=medium
* New upstream release:
- fp_print_deserialize will now correctly return a sunken reference
- Object reference management fixes for FpPrint and identify
- Fixed issues that caused problem on non-x86 machines (#236)
- Fix building with older GLib versions
- synaptics: Support PID 00e7
- goodix: Fix issue with long USB packages
* debian/control:
- Remove Didier Raboud from uploaders (as he requested via bigon).
- Mark libfprint-2-doc as Multi-Arch: foreign
* debian/rules:
- Ignore tests failures in s390x as it now builds and tests correctly
- Increase testing timeout.
* debian/{control,rules,*.install}:
- Switch to debhelper 13 and use its features.
As per this restrict more the .install files wilcards
* debian/gbp.conf: Include suggested settings by GNOME team.
- Even if libfprint is not part of GNOME I think these settings are good
practice anyways.
* debian/patches:
- Refresh
- Add upstream patch to avoid nbis library warnings.
These have been checked to be harmless upstream
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Thu, 10 Dec 2020 15:58:37 +0100
libfprint (1:1.90.5-2) unstable; urgency=medium
* d/p/fpi-device-Return-proper-type-on-identification-success.patch,
d/p/test-fpi-device-Always-check-the-return-values-for-the-AP.patch:
- Properly handle identify return value and add tests.
This fixes fprintd test failures in s390x
* d/p/fp-print-Don-t-byte-swap-two-times-the-NBIS-array-content.patch:
- Fixes virtual-image test in libfprint for s390x
* debian/control: Add myself to Uploaders
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Dec 2020 17:53:32 +0100
libfprint (1:1.90.5-1) unstable; urgency=medium
* New upstream release:
- Remove USB hub from udev autosupend rules
- synaptics: Add PID 0x00c9 which is used in some HP laptops
* debian/patches: Use gbp pq topics for debian-specific patches
-- Marco Trevisan (Treviño) <marco@ubuntu.com> Wed, 02 Dec 2020 05:11:33 +0100
libfprint (1:1.90.4-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Work around GUsb cancellation issue
- Redefine internal image device state machine for more robustness
- Add public finger-status reporting to FpDevice
- Rework device removal API to be convenient
- Enable powersave for unsupported USB devices (LP: #1905603)
- Improvements to examples
- synaptics: Support identify operation (LP: #1905600)
- synaptics: Fix possible crash when the interrupt transfer is resubmitted
- synaptics: Add support for PIDs 0x00f9, 0x00fc and 0x00c2
- elan: Add PID 0x0c4d to supported device list
- aes3k: Fix driver and add CI test (LP: #1897613)
- uru4000: Fix reference counting of image transfer
- vfs301: Fix driver and add CI test (LP: #1905597, Closes: #951648)
* debian/libfprint-2-2.symbols: Add new symbols
* debian/rules: Also build the virtual drivers, as they're useful for
testing libfprint and fprintd
[ Laurent Bigonville ]
* debian/control: Bump Standards-Version to 4.5.1 (no further changes)
-- Laurent Bigonville <bigon@debian.org> Tue, 01 Dec 2020 11:36:08 +0100
libfprint (1:1.90.3-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release
- Fixed crash in VFS0050 (LP: #1876502)
- Enrollment fails with UPEK reader (LP: #1881380)
- Lots of various drivers fixes
- As per a patch for nbis required for some sensors that was accidentally
dropped in an earlier release. Users of sensors/drivers aes1610, aes2501,
aes2550, aes1660, aes2660, elan, upektc_img) need to re-enroll
* d/p/git_reading_pointer.patch:
- Dopped (applied upstream)
[ Laurent Bigonville ]
* New upstream release
-- Laurent Bigonville <bigon@debian.org> Sun, 15 Nov 2020 16:05:30 +0100
libfprint (1:1.90.1-2) experimental; urgency=medium
* Team upload.
[ Laurent Bigonville ]
* debian/control: Add libcairo-dev and python3 to build-dependencies as they
are explicitly required for some tests
[ Sebastien Bacher ]
* debian/patches/git_reading_pointer.patch:
- backport an upstream fix for a test issue
* debian/rules:
- don't fail the build on s390x test results, upstream stated that
fixing those is low priority for them since there is no real
usecase for fingerprint authentification on that architecture.
* Use the correct indentation for the previous changes
-- Laurent Bigonville <bigon@debian.org> Thu, 27 Feb 2020 16:28:45 +0100
libfprint (1:1.90.1-1) experimental; urgency=medium
* Team upload.
* The "I should check if somebody else hasn't done the work already" release
* New upstream release
- Replace libusb-1.0 build-dependency by gusb and add libgusb-doc to the
Build-Depends-Indep. Also drop libxv-dev from the build-dep.
- Drop d/patches/kFreeBSD_FTBFS_add_ETIME_definition.patch and
d/patches/use-non-versionned-libusbh-path.patch, not needed anymore
- debian/patches/udev-rules-creation-add-Debian-specifics.patch: refreshed
by Sebastien Bacher, thanks!
- Bump the soname to libfprint-2
- Bump libglib2.0-dev and meson minimal versions
* Bump debhelper compatibility version to 12
* Add gobject-introspection and libgirepository1.0-dev to the
build-dependencies and install the GObject introspection bindings
* debian/control: Bump Standards-Version to 4.4.1 (no further changes)
* debian/control: Build-Depends on python3-cairo, python3-gi, umockdev for
the testsuite
* Update debian/libfprint2.postinst for the new supported readers
* debian/gbp.conf: Upstream tags have changed format
* debian/control: Bump Standards-Version to 4.5.0 (no further changes)
* d/p/udev-rules-creation-add-Debian-specifics.patch: Avoid unprivileged
users to be able to read the devices, this is not necessary and could lead
to fingerprint images being captured.
-- Laurent Bigonville <bigon@debian.org> Thu, 13 Feb 2020 16:35:50 +0100
libfprint (1:1.0-1) unstable; urgency=medium
* Team upload.
* New upstream release
- d/p/lib-Add-accessor-for-minutia-coordinates.patch,
d/p/fix_ftbfs_meson.patch: Dropped, applied upstream
- Other patches: Refreshed
- debian/libfprint0.symbols: Add newly exported symbol
- debian/libfprint0.postinst: Call udevadm --trigger also for the new
supported readers
* debian/gbp.conf: Set pristine-tar and upstream-vcs-tag
* debian/control: Update Vcs-* fields (Closes: #909256)
* debian/rules: Disable the build of the GTK+ test application for now, this
is not ready yet
* debian/control: Bump Standards-Version to 4.4.0 (no further changes)
* debian/libfprint0.symbols: Add the Build-Depends-Package field
* debian/control: Add libglib2.0-doc to Build-Depends-Indep, this allows
gtk-doc to properly resolve all the links in the documentation
* debian/README.source: Document how the list of devices in
debian/libfprint0.postinst is generated
-- Laurent Bigonville <bigon@debian.org> Fri, 23 Aug 2019 17:27:45 +0200
libfprint (1:0.8.2-3) unstable; urgency=medium
* Team upload.
* d/p/lib-Add-accessor-for-minutia-coordinates.patch: Add a way to access
minutia coordinates, this will help to fix ftbfs in fprint_demo
-- Laurent Bigonville <bigon@debian.org> Wed, 10 Oct 2018 17:20:45 +0200
libfprint (1:0.8.2-2) unstable; urgency=medium
* Team upload.
* debian/rules: Remove the *.private fields of libfprint.pc (Closes:
#906975)
-- Laurent Bigonville <bigon@debian.org> Thu, 23 Aug 2018 15:02:51 +0200
libfprint (1:0.8.2-1) unstable; urgency=medium
* Team upload.
* New upstream release (Closes: #904791)
- Switch to meson, the static library is not built anymore
- Bump debhelper version to >= 10.3 to have meson support
- debian/libfprint0.symbols: Add newly exported symbols
- Fix security hole by zero out memory when allocated (Closes: #890827)
- d/p/kFreeBSD_FTBFS_add_ETIME_definition.patch: Updated
- d/p/use-non-versionned-libusbh-path.patch: Updated
- debian/libfprint0.postinst: Call udevadm --trigger also for the new
supported readers
* debian/watch: Update the watch file to point to the freedesktop gitlab
release page
* Build the documentation
* debian/libfprint0.lintian-overrides: Overrides udev-rule-missing-uaccess,
we don't want the readers to be accessible by unprivileged users
* debian/rules: Do not explicitly pass --parallel to debhelper as it's the
default now
* debian/control: Bump Standards-Version to 4.1.4 (no further changes)
* debian/control: Bump all the packages to priority optional, priority extra
is now deprecated
* debian/rules: Simplify the installation of the udev rules file
* Ship the API doc in a new libfprint-doc package
* d/p/fix_ftbfs_meson.patch: Fix FTBFS with newer meson
* debian/control: Bump Standards-Version to 4.2.0 (no further changes)
-- Laurent Bigonville <bigon@debian.org> Sun, 12 Aug 2018 17:51:42 +0200
libfprint (1:0.7.0-1) unstable; urgency=medium
* Team upload.
* New 0.7.0 upstream release:
- Add VFS0050 driver (Closes: #843626)
- Refresh the patches, drop all the upstreamed ones
* Bump debhelper compatibility to 10 and rely on dh_autoreconf instead of
calling the autotools explicitly
* debian/control:
- Bump Standards-Version to 3.9.8 (no further changes)
- Use https for the Homepage and Vcs-* fields
- Drop libssl-dev build-dependency, not needed anymore (Closes: #854710)
- Drop libmagickcore-dev build-dep and add libpixman-1-dev
instead, ImageMagick is not supported since 0.6.0
* Add debian/watch file
* debian/libfprint0.postinst: Add new calls to "udevadm --trigger" to
also properly set the permissions on the newest supported readers.
-- Laurent Bigonville <bigon@debian.org> Wed, 17 May 2017 16:58:45 +0200
libfprint (1:0.6.0-2) unstable; urgency=low
* Upload to unstable
* Add simple gbp.conf to help with releasing
-- Didier Raboud <odyx@debian.org> Sun, 03 May 2015 15:19:19 +0200
libfprint (1:0.6.0-1) experimental; urgency=medium
* New 0.6.0 upstream release:
* Drivers:
- Reduce duplication between AES3500 and AES4000 drivers and add support
for AES3500 device
- Add support for UPEK 147e:2020 and Upek Eikon 2 devices
- Add EgisTec ES603 driver
- Add VFS5011 driver (Closes: #713815)
- Always perform 5 scans for image enrollment
- Better verification with AES1660 driver
- Better verification for a number of AES drivers
* Library:
- Always use Pixman for image manipulation, gdk-pixbuf and ImageMagick
are not supported any more.
* Udev rules:
- Fix warning when USB hub or system does not support power management
[ Didier Raboud ]
* Refresh Debian patches
* Backport two upstream patches:
- imgdev: fix enum mismatch for dev_change_state() call
- vfs101: Logical conjunction always evaluates to false
* Add two new 0.6.0 symbols
-- Didier Raboud <odyx@debian.org> Fri, 27 Mar 2015 08:33:53 +0100
libfprint (1:0.5.1-1) unstable; urgency=low
* New 0.5.1 upstream release:
- Update patches list for 0.5.1, drop 6 patches incorporated or
backported from upstream, refresh one.
-- Didier Raboud <odyx@debian.org> Sun, 29 Sep 2013 13:41:22 +0200
libfprint (1:0.5.0-6) unstable; urgency=low
[ Jeremy Bicha ]
* Fix underlinking against glib - thanks to Julian Taylor
(Closes: #710381, #713466)
[ Didier Raboud ]
* Run udevadm trigger on 147e:2020 too
-- Didier Raboud <odyx@debian.org> Mon, 24 Jun 2013 11:24:43 +0200
libfprint (1:0.5.0-5) unstable; urgency=low
* Upload to unstable with two more backports from upstream:
- imgdev: fix cancelling of enrollment from stage_completed callback
- upeke2: Add support for 147e:2020 ID
-- Didier Raboud <odyx@debian.org> Sat, 18 May 2013 16:35:39 +0200
libfprint (1:0.5.0-4) experimental; urgency=low
* Correct the kFreeBSD ETIME patch update to define ETIME later.
-- Didier Raboud <odyx@debian.org> Sun, 03 Mar 2013 15:22:25 +0100
libfprint (1:0.5.0-3) experimental; urgency=low
* Update kFreeBSD ETIME patch to also correct the vfs301 driver.
-- Didier Raboud <odyx@debian.org> Sun, 03 Mar 2013 13:56:16 +0100
libfprint (1:0.5.0-2) experimental; urgency=low
* Patch vfs301 driver to look for libusb.h without the versionned
path, hopefully fixes the kFreeBSD FTBFS.
* Bump Standards-Version to 3.9.4 without changes needed.
* Only execute the udevadm commands if udevadm is in the script path,
allows seamless install in chroots without udev and non-Linux.
-- Didier Raboud <odyx@debian.org> Sun, 03 Mar 2013 12:58:41 +0100
libfprint (1:0.5.0-1) experimental; urgency=low
* New 0.5.0 upstream release.
[ Didier Raboud ]
* Refresh all patches for 0.5.0
- Drop fix-libusb-global-variables-FTBFS.patch implemented upstream.
* Backport two upstream hotfixes for uru4000:
- uru4000: fix race condition on waiting power up irq
- uru4000: fix cancelling of imaging from error callback
[ Luca Capello ]
* Apply udev rules at install time with udevadm --trigger (Closes: #683863)
-- Didier Raboud <odyx@debian.org> Sat, 02 Mar 2013 18:52:25 +0100
libfprint (1:0.4.0-4-gdfff16f-4) unstable; urgency=low
* Fix libusb global variables FTBFS. (Closes: #680838)
-- Didier Raboud <odyx@debian.org> Mon, 09 Jul 2012 00:46:05 +0200
libfprint (1:0.4.0-4-gdfff16f-3) unstable; urgency=low
* Patch the udev rules creator to:
- include all devices; (Closes: #679001)
- handle blacklists correctly.
-- Didier Raboud <odyx@debian.org> Tue, 26 Jun 2012 10:52:16 +0200
libfprint (1:0.4.0-4-gdfff16f-2) unstable; urgency=low
* Mark libfprint0 Multi-Arch: same.
* Add patch to define ETIME for the kFreeBSD flavours. (Closes:
#673704)
-- Didier Raboud <odyx@debian.org> Mon, 21 May 2012 10:55:36 +0200
libfprint (1:0.4.0-4-gdfff16f-1) unstable; urgency=low
* New upstream release snapshot.
- Fix versioning with an epoch: the 0.4.0 version was released and
this is indeed a post-0.4.0 upstream snapshot.
* Bump debhelper Build-Depends and compat to 9.
* Use short debhelper style; migrate to multiarch.
* Use the built udev rules for autosuspend; append our mode and group
specificities.
* Add symbols tracking for libfprint0.
* Update homepage to the new home at freedesktop.org.
* Bump Standards-Version to 3.9.3 without changes needed.
* Add Vcs-* to reflect the new Git repository.
* Drop the mention of the old synchronous library from the
description.
* Drop useless dirs specifications.
* Avoid duplication of Section snippet in control.
* Add myself as uploader.
-- Didier Raboud <odyx@debian.org> Sat, 19 May 2012 17:11:57 +0200
libfprint (20110418git-2) unstable; urgency=low
* Transitioning from libmagick9 to libmagickcore (Closes: #625597, #629788).
-- Ulises Vitulli <dererk@debian.org> Sun, 12 Jun 2011 12:22:16 -0300
libfprint (20110418git-1) unstable; urgency=low
* New upstream release.
* Removing resigned uploader from the Uploaders filed (Closes: #595719).
* Cleaning out 'dependency_libs' for multiarch support (Closes: #620447).
* Added libnss as build-depend for uru4000.
* Added Validity VFS101 device support.
* Bump Standard-version up to 3.9.2.0 (no changes needed).
-- Ulises Vitulli <dererk@debian.org> Tue, 19 Apr 2011 14:58:27 -0300
libfprint (20100820git-1) unstable; urgency=low
* New upstream snapshot.
* Remove local patches, reported and applied on upstream side,
thanks BastienNocera:
- Check-return-code-from-img2print-conversion.patch.
- Add-some-corrective-action-if-there-are-missing-pack.patch.
- Make-the-2-right-shift-correction-happen-on-image-ha.patch.
- Dont-consider-the-scan-complete-unless-there-is-atle.patch.
-- Ulises Vitulli <dererk@debian.org> Mon, 23 Aug 2010 09:02:32 -0300
libfprint (20100819git-2) unstable; urgency=low
* debian/libfprint0.udev:
- Include support for uru400 (05ba:0008).
- Include support for upeke2 and upeksonly (147e:2016).
- Include support for Veridicom 5thSense (061a:0110).
-- Ulises Vitulli <dererk@debian.org> Sun, 22 Aug 2010 21:48:02 -0300
libfprint (20100819git-1) unstable; urgency=low
* New upstream release:
- upeke2: Add support for 0x2e status code (Closes: #584563, #585179).
- Don't crash when no devices are present.
- Implement discover() methods for upeke2 and upeksonly.
- Rework "discover" code for drivers.
- Finish implementation of AES1610 driver.
- Add udev rules to set devices to autosuspend.
- Add gdk-pixbuf support.
* Bump Standard-version up to 3.9.1.
-- Ulises Vitulli <dererk@debian.org> Thu, 19 Aug 2010 13:30:18 -0300
libfprint (20081125git-4) unstable; urgency=low
* debian/libfprint0.udev:
Include support for aes2501-wy (08ff:2500).
-- Ulises Vitulli <uvitulli@fi.uba.ar> Sun, 18 Apr 2010 18:34:23 -0300
libfprint (20081125git-3) unstable; urgency=low
* The 'Oh-yeah!' upload:
- Droping pkg from experimental, now going to unstable.
* Switch to dpkg-source 3.0 (quilt) format.
* Minor package updates to comply with 3.8.4 standard.
- debian/control: Added misc:Depends for libfprint0+libfprint-dev.
-- Ulises Vitulli <uvitulli@fi.uba.ar> Wed, 14 Apr 2010 12:00:01 -0300
libfprint (20081125git-2) experimental; urgency=low
* Fix missing dependence (Closes: #539085).
-- Ulises Vitulli <uvitulli@fi.uba.ar> Wed, 29 Jul 2009 08:21:37 -0300
libfprint (20081125git-1) experimental; urgency=low
* Synchronized to upstream v0.1.0-pre1 release.
* Upstream git checkout fixing little issues:
- Fixes libtool problem.
- Add more debuging support.
* Minor package updates to comply with 3.8.2 standard.
* Now depends on libusb-1.0.
-- Ulises Vitulli <uvitulli@fi.uba.ar> Sat, 06 Jun 2009 12:00:26 -0300
libfprint (0.0.6-2) experimental; urgency=low
* Fixing to non-native pkg (Closes: 481434)
-- Ulises Vitulli <uvitulli@fi.uba.ar> Thu, 15 May 2008 21:56:24 -0300
libfprint (0.0.6-1) experimental; urgency=low
* New upstream release (Closes: #472780).
* Adding udev rule allowing 'plugdev' group access fprint known devices.
-- Ulises Vitulli <uvitulli@fi.uba.ar> Wed, 26 Mar 2008 10:59:55 -0300
libfprint (0.0.5-3) experimental; urgency=low
* Fixing dependences (Closes: #469813)
-- Ulises Vitulli <uvitulli@fi.uba.ar> Fri, 07 Mar 2008 08:47:18 -0200
libfprint (0.0.5-2) experimental; urgency=low
* Added license for nbis/* files in copyright file
-- Miguel Gea Milvaques <xerakko@debian.org> Mon, 04 Feb 2008 21:02:48 +0100
libfprint (0.0.5-1) experimental; urgency=low
[ Emfox Zhou ]
* Initial release (Closes: #460493, #438922)
[ Miguel Gea Milvaques ]
* Moved target from unstable to experimental
* Lintian clean ( makefile distclean in rules)
-- Miguel Gea Milvaques <xerakko@debian.org> Sat, 02 Feb 2008 22:56:51 +0100