sbuild (0.89.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/Build.pm:
- improve error message for when a source package was not found
- if unpacked source directory already exists in schroot mode with
persistent mountpoint on /build (Closes: #1091222)
* To set an unreproducible build path, BUILD_PATH has to be the empty string
* man/sbuild.1.in:
- improve option text. Thanks to Leopold Palomo-Avellaneda
- document the existance of new autopkgtest backends
* debian/tests/get_default_release.py: support base-files from
proposed-updates (Closes: #1057768)
* lib/Sbuild/Conf.pm:
- do not list 'sid' in CHROOT_ALIASES (Closes: #1099551)
- move NOLOG to other Logging options
* bin/sbuild:
- print dpkg-source invocations with --debug (Closes: #1094982)
- fix error message about missing --maintainer when using --make-binNMU
or --append-to-version (Closes: #1095063)
* Store the original value of $dsc in 'DSC Orig' and use it in
run_autopkgtest (Closes: #1090360)
* Lintian 2.77.0 reversed the exit status for program errors and policy
violations (Closes: #1032302)
* lib/Sbuild/ChrootUnshare.pm:
- check if the unshared user can 'touch' the unpack directory
- warn if primary effective group id does not match the group id of the
user account (Closes: #1101753)
* Add new option --hide-log-sections to hide log sections (Closes: #1050147)
* disallow relative build path
* document a workaround for running autopkgtest backends that require
$HOME to be set (Closes: #1033352)
* Do not create a binary-only=yes d/changelog entry if --binNMU=0, relax
binNMU restrictions (Closes: #963756)
* bin/sbuild-usernsexec: Add entry for / in /proc/mounts.
Thanks to Helmut Grohne <helmut@subdivi.de> (Closes: #1087430)
* lib/Sbuild/Options.pm: add --log-filename-ts-format (Closes: #834736)
[ Jochen Sprickerhof ]
* Don't run dpkg-buildtree for old dpkg (Closes: #1100636)
* Make sure PATH is set when executing commands (Closes: #1101928)
* Deprecate sbuild-debian-developer-setup (Closes: #1101753)
* Fix uninitialized value in Build.pm
[ Daniel Gröber ]
* bin/sbuild-debian-developer-setup:
- Pass --arch through to sbuild-createchroot
- Tweak schroot alias logic for multiple arches (Closes: #1100769)
[ Aurelien Jarno ]
* sbuild.1.in: improve the aspcud criteria for experimental
[ Chris Hofstaedtler ]
* Remove invocation of host gpg
* Remove CHROOT_MODE=sudo (Closes: #731573)
[ Richard Lewis ]
* debian/tests/unshare: skip test if mmdebstrap fails
* Build.pm:
- Split log_file() out of open_build_log()
- Store name of the log file
- Define %SBUILD_LOG_DIR, %SBUILD_LOG_BASENAME and %SBUILD_LOG_PATH
- Define %SRCPACKAGE and %SRCPACKAGE_VERSION
* sbuild.1.in: Improve documentation of percent-escapes
[ Guillem Jover ]
* Buildd::Uploader: Update dupload output scrapping against latest version
* Update dupload queue names
[ Sebastian Crane ]
* Allow using doas in sbuild-debian-developer-setup
[ Jakob Haufe ]
* Error out when both DOAS_USER and SUDO_USER are set
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Tue, 15 Apr 2025 20:56:15 +0200
sbuild (0.88.5) unstable; urgency=medium
* distro_mangle: drop duplication in regex
* build_as_root_when_needed: support older dpkg
-- Jochen Sprickerhof <jspricke@debian.org> Sat, 01 Mar 2025 10:10:11 +0100
sbuild (0.88.4) unstable; urgency=medium
[ Samuel Thibault ]
* bin/buildd-vlog: Fix against perl 5.40.
[ Richard Lewis ]
* .perltidyrc: Use tabs for consistency with .editorconfig
* Add test/check-perltidy to run perltidy on perl files
* run test/check-perltidy -w
* make lib/Sbuild/Sysconfig.pm.in perltidy
* make everything perltidy - additional changes from unstable version
[ Jochen Sprickerhof ]
* Obey $TMPDIR for unshare_tmpdir_template
* Use root for Rules-Requires-Root: binary-targets
(enable with $build_as_root_when_needed = 1)
* Error out when running sbuild-* in unshare mode (Closes: #1094239)
* AUTOPKGTEST_OPTIONS: no longer pass --apt-upgrade to unshare
* sbuild-usernsexec: unlink resolv.conf before creating it (Closes: #1071736)
* Use GET to set WANNA_BUILD_SSH_CMD value
-- Jochen Sprickerhof <jspricke@debian.org> Thu, 20 Feb 2025 13:39:25 +0100
sbuild (0.88.3) unstable; urgency=medium
[ Samuel Thibault ]
* bin/sbuild-createchroot: Add --extra-suites parameter.
[ Johannes Schauer Marin Rodrigues ]
* lib/Buildd/ClientConf.pm: WANNA_BUILD_SSH_CMD is an array, not a string
(Closes: #1093536)
* Add a supplementary group for the build user
* Convert remaining bash scripts to POSIX shell
[ Jochen Sprickerhof ]
* Add missing build dependency on apt
* Don't pass --root-owner-group to old dpkg
-- Jochen Sprickerhof <jspricke@debian.org> Sun, 02 Feb 2025 11:12:43 +0100
sbuild (0.88.2) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/Conf.pm:
- fix examples for ENVIRONMENT_FILTER (Closes: #1090336)
- do not ignore an empty DEB_BUILD_PROFILES environment variable
- Add CHROOT_ALIASES configuration option, allowing one to look up chroots
under a different name (Closes: #1089035)
* lib/Sbuild/ConfBase.pm:
- run check after setting all values
- preserve order of configuration options
- Set variables to their default values in ~/.config/sbuild/config.pl
(Closes: #1090358)
* lib/Sbuild/ChrootUnshare.pm:
- check if mmdebstrap is installed only when needed
- instead of passing the tarball path to the decompressor, let sbuild open
it and feed it to the decompressor program via standard input (Closes:
#1091169)
* debian/tests/unshare:
- install ca-certificates for https debci hosts. Thanks to Paul Gevers
- run dpkg-deb with --root-owner-group (Closes: #1092091)
* lib/Sbuild/Build.pm: fail if dpkg --print-foreign-architectures failed
* lib/Sbuild/ResolverBase.pm: build metapackage with dpkg-deb
--root-owner-group (Closes: #1092557)
* Use dpkg-buildtree to figure out if fakeroot is required
* die if exec fails because it cannot find the program
[ Simon McVittie ]
* man: Cross-reference the --build-dir option in BUILD ARTIFACTS
* man: Document how and where log files are saved
[ Guillem Jover ]
* lib/Sbuild/Conf.pm: Do not use deprecated Dpkg::Build::Info module
[ Chris Hofstaedtler ]
* Remove deborphan from Suggests:, package was removed
* sbuild-update: abort if chroot-mode=unshare (Closes: #1089105, #1091370)
[ Santiago Ruano Rincón ]
* Add Recommends on iproute2
* Fix mmdebstrap+unshare setup-hook when handling *-security suites
[ Jakub Wilk ]
* man: Remove stray quotation mark
[ Richard Lewis ]
* man/sbuild.1.in: remove stray quotation mark
* Document the need to retain package lists in the chroot if $apt_update is 0
(Closes: #1091170)
[ Jochen Sprickerhof ]
* unshare: Use $BUILD_USER as the default user
* unshare: Use 'sbuild' as the default user
* Use BUILD_USER for architecture and disk space check
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Thu, 16 Jan 2025 07:46:28 +0100
sbuild (0.88.1) unstable; urgency=medium
[ Helmut Grohne ]
* configure apt's barbarian architectures for the cross build profile
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/ResolverBase.pm: disable the sbuild-cross-resolver without
apt-utils in the chroot
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Mon, 16 Dec 2024 13:55:17 +0100
sbuild (0.88.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* Breaking change: UNSHARE_MMDEBSTRAP_EXTRA_ARGS now supports globs and
regexes as keys and is a list instead of a hash. The last part means that
if you set $unshare_mmdebstrap_extra_args in your ~/.sbuildrc, you have to
convert it to a list. See sbuild.conf(5) for examples and documentation.
(Closes: #1088653)
* lib/Sbuild/ChrootUnshare.pm:
- eval replacement string to be able to reference matches in the regex
- support distro mangle replacement strings containing a prefix to $1
- filter out CHRTYPE and BLKTYPE entries from tarballs (Closes: #1068382)
* lib/Sbuild/Conf.pm: also replace percent-escapes in the mmdebstrap
arguments
* debian/tests/unshare:
- disable cross-builds until #1088971 is fixed in autopkgtest
- use --bd-uninstallable-explainer=apt because the dose explainer does not
respect apt pinning and thus presents useless successes
* lib/Sbuild/Build.pm:
- don't copy in /usr/lib/apt/solvers/apt from the outside (Closes:
#1088836)
- refactor condition to avoid nesting and reduce indentation
- be more verbose about dpkg-buildpackage failures
* bin/sbuild-cross-resolver: support debug output when used by the apt
BD_UNINSTALLABLE_EXPLAINER for cross building
* Add a few more 'I:' status messages
[ Samuel Henrique ]
* Add .*-security to UNSHARE_MMDEBSTRAP_DISTRO_MANGLE (closes: #1088655)
[ Chris Hofstaedtler ]
* example.sbuildrc: drop "1;"
[ Jochen Sprickerhof ]
* Pass host architecture to piuparts
* Fix mmdebstrap command when keep_tarball is not set
* Add newline to uidmap error message (Closes: #1089126)
* Map any UNRELEASED.* string to unstable
[ Emanuele Rocca ]
* bin/sbuild-usernsexec: fix passwd typos
[ Julian Andres Klode ]
* d/t/build-procenv: Cat the debootstrap.log if it fails
[ Matthias Klose ]
* add timestamps to subsection logging (Closes: #1088662)
[ Niko Tyni ]
* Use build start time when generating binNMU timestamp (Closes: #1089088)
[ Richard Lewis ]
* Remove old dependencies
[ Santiago Vila ]
* Use standard location for perl
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Sun, 15 Dec 2024 22:39:40 +0100
sbuild (0.87.1) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* prefer ~/.config/sbuild/config.pl over ~/.sbuildrc (Closes: #1087378)
* default build path is /build/reproducible-path and switch off log filtering
* bin/sbuild: run dpkg-buildpackage --target clean instead of running
debian/rules clean under fakeroot
* lib/Sbuild/Conf.pm:
- throw out FAKEROOT
- add UNSHARE_MMDEBSTRAP_DISTRO_MANGLE
* lib/Sbuild/ChrootUnshare.pm:
- create new tarball for a chroot given via --chroot if it was missing
- always print mmdebstrap invocation when creating new chroot tarballs
- if mmdebstrap failed unlink (probably empty) tarball
- print out the files that were ignored because they are empty
- also translate UNRELEASED->unstable via unshare_mmdebstrap_distro_mangle
* bin/sbuild-usernsexec:
- do not attempt bind-mounting something that does not exist on the
outside
- be more verbose about what failed to mount
* bin/sbuild-cross-resolver: switch license to mit/expat
* Be more elaborate with explanation for insufficient disk space
(Closes: #1087656)
* debian/tests/unshare: test cross compilation
* debian/copyright: modernize
[ Alexis Murzeau ]
* lib/Sbuild/Base.pm: add function to add items to array conf options
* lib/Sbuild/Options.pm: replace uses of push by push_conf
* test/sbuild-options-parsing.pl: test that options correctly set conf
variables
[ Jochen Sprickerhof ]
* Improve wording about future schroot deprecation
* Use mmdebstrap to create piuparts chroot
[ Chris Hofstaedtler ]
* Reword schroot/unshare compat warning
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Mon, 25 Nov 2024 11:17:42 +0100
sbuild (0.87.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* If a tarball can't be found, create a chroot on-demand using mmdebstrap.
This version introduces an experimental new feature for the unshare
backend which is supposed to make sbuild more easy to use because sbuild
will manage the chroot tarballs itself. With unshare-mode, sbuild will
now automatically create a chroot tarball upon startup using mmdebstrap
if it cannot find one in ~/.cache/sbuild. This feature can be disabled
by setting $unshare_mmdebstrap_auto_create=0; in your ~/.sbuildrc. If
you like the feature and you would like to keep the tarballs sbuild
creates so that they can be re-used in subsequent invocations of sbuild,
you can set $unshare_mmdebstrap_keep_tarball=1; in your ~/.sbuildrc.
This will also make sbuild update an existing tarball (by re-creating
it) if it has become too old. The maximum age of a chroot tarball can be
specified by setting $unshare_mmdebstrap_max_age to a maximum age value
in seconds (default is 604800, which is one week). To customize the
chroot tarball creation, refer to the setting
UNSHARE_MMDEBSTRAP_EXTRA_ARGS in your sbuild.conf(5).
[ Jochen Sprickerhof ]
* Use empty release in unshare autopkgtest (Closes: #1085450)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Tue, 12 Nov 2024 00:09:38 +0100
sbuild (0.86.3) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* bin/sbuild-usernsexec: add interesting package sets for the unshare backend
* bin/sbuild-usernsexec: do not die if symlink creation fails but warn with
the possible reason for failure
(Closes: #1085219)
[ Chris Hofstaedtler ]
* Drop sbuild-debuild code
[ Johannes Schauer Marin Rodrigues ]
* If run in unshare mode and if unset in ~/.sbuildrc, run piuparts and
autopkgtest in unshare mode as well, re-using the sbuild tarball
* unify ROOT_ARGS handling of autopkgtest and piuparts
* lib/Sbuild/Build.pm: remove use of apt's Debug::BuildDeps=1 which was last
used in jessie and no longer exists in apt since stretch
[ Benjamin Drung ]
* debian/tests/unshare-qemuwrapper: Test absolute paths in %SBUILD_DSC
* debian/tests/unshare: Test fix building symlinks not ending on .dsc
(Closes: #1012856)
[ Jochen Sprickerhof ]
* Don't show "Keeping session:" in unshare mode (Closes: #1073295)
* Update sbuild wiki link
-- Jochen Sprickerhof <jspricke@debian.org> Sun, 27 Oct 2024 08:12:10 +0100
sbuild (0.86.2) unstable; urgency=medium
* unshare: disable pivot_root (Closes: #1084956)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Sat, 12 Oct 2024 21:57:54 +0200
sbuild (0.86.1) unstable; urgency=medium
* unshare: Don't setsid() for hooks (Closes: #1084174)
* Add warning for schroot users
* Fix lintian warning superfluous-file-pattern
-- Jochen Sprickerhof <jspricke@debian.org> Fri, 11 Oct 2024 09:33:39 +0200
sbuild (0.86.0) unstable; urgency=medium
[ Chris Hofstaedtler ]
* Remove buildd-mail-wrapper compat symlink
* Remove NEWS-buildd, ending in 2004
* Remove reference to deleted ChangeLog-buildd
* Remove Makefile-buildd
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/Build.pm: warn if source package name is not defined
* lib/Sbuild/ConfBase.pm: fall back to sane PATH if unset
* debian/salsa-ci.yml: SALSA_CI_REPROTEST_ENABLE_DIFFOSCOPE: 1
* remove ./debian/buildd.init
* d/rules: set LC_ALL=C.UTF-8 for reproduciblity (Closes: #1082358)
* refactor the unshare backend as /usr/libexec/sbuild-usernsexec
[ Helmut Grohne ]
* sbuild-usernsexec: avoid getpwnam inside the chroot
[ Grzegorz Szymaszek ]
* man/sbuild-update.1: delete clean from an example
[ Johannes Schauer Marin Rodrigues ]
* add .perltidyrc
* lib/Sbuild/Build.pm: when auto-adding deb-src to EXTRA_REPOSITORIES,
consider sources.list entries unique by Repo-URI, Codename and Component
[ Jochen Sprickerhof ]
* Remove unused use
* unshare: mkdir before bind mounting
[ Johannes Schauer Marin Rodrigues ]
* bin/sbuild-usernsexec: let make_path croak() by itself on error.
Thanks to Guillem Jover
-- Jochen Sprickerhof <jspricke@debian.org> Wed, 02 Oct 2024 14:59:15 +0200
sbuild (0.85.11) unstable; urgency=medium
[ Christian Kastner ]
* sbuild-qemu: Add discard=unmap to drive options
* sbuild-qemu-update: Reduce image size after update (Closes: #1073509)
[ Paride Legovini ]
* Unshare: run useradd/groupadd with --prefix instead of --root
[ Jochen Sprickerhof ]
* Mark dumb-init as :native (Closes: #1079731)
-- Jochen Sprickerhof <jspricke@debian.org> Wed, 28 Aug 2024 11:15:11 +0200
sbuild (0.85.10) unstable; urgency=medium
* autopkgtest: skip test for unreleased architecture
-- Jochen Sprickerhof <jspricke@debian.org> Thu, 30 May 2024 10:41:26 +0200
sbuild (0.85.9) unstable; urgency=medium
[ Aurelien Jarno ]
* Unshare: add IPv6 loopback address to /etc/hosts
* Unshare: preserve HOME environment variable
* Unshare: define the LOGNAME environment variable
[ Christian Kastner ]
* sbuild-qemu: Fix typo breaking one guess for image path
* sbuild-qemu: Don't add --dist (Closes: #1071000)
[ Helmut Grohne ]
* lib/Sbuild/ChrootUnshare.pm: Do not expose /sys/kernel in the unshare backend.
(Closes: #1071234)
[ Timo Röhling ]
* Relax permissions on pipes connected to STDOUT (Closes: #1070007)
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/Conf.pm: make the schroot binary configurable via ~/.sbuildrc
* bin/sbuild: only check group membership if 'schroot' is configured as the schroot binary
-- Jochen Sprickerhof <jspricke@debian.org> Wed, 29 May 2024 10:46:22 +0200
sbuild (0.85.8) unstable; urgency=medium
[ Aurelien Jarno ]
* man/sbuild-createchroot.8.in: fix unshare mode example
* Unshare: use linux32 personality for 32-bit on 64-bit architectures
-- Jochen Sprickerhof <jspricke@debian.org> Thu, 25 Apr 2024 14:49:56 +0200
sbuild (0.85.7) unstable; urgency=medium
[ Santiago Ruano Rincón ]
* Remove deprecation note about the sudo chroot mode
[ Christian Kastner ]
* sbuild-qemu: Use 4M OVMF images if available
[ Jochen Sprickerhof ]
* Add --{no-,}enable-network and ENABLE_NETWORK options
* Unshare: use dumb-init for build
* Run post-build-failed-commands before cleanup
* Add myself to uploaders
[ Boyuan Yang ]
* "directory" is available for "--extra-package" (Closes: #1040978)
-- Jochen Sprickerhof <jspricke@debian.org> Fri, 12 Apr 2024 18:50:09 +0200
sbuild (0.85.6) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* d/tests/unshare: generate a new GPG key every time using sqop.
* d/tests/unshare: copy apt sources and preferences from outside the chroot
* d/control: let buildd depend on sbuild (= ${binary:Version}) as it is not
arch:any
* d/tests/unshare-qemuwrapper: drop --mode=unshare in favour of mmdebstrap
picking the mode automatically depending on what is available
* man/sbuild-debian-developer-setup.1.in: document where the chroot is placed
* lib/Sbuild/ChrootUnshare.pm: use HOME from config instead of the
environment
* follow adduser's changes in example: --gecos => --comment
[ Benjamin Drung ]
* d/t/get_default_release.py: Support Ubuntu
* Test unshare autopkgtest directly
[ Dave Jones ]
* Update verify_deb to match current zstd output
[ Tianyu Chen ]
* Fix extra-packages log output
[ Arnaud Rebillout ]
* Update sbuild-createchroot man page regarding merged-usr
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Mon, 26 Feb 2024 19:22:49 +0100
sbuild (0.85.5) unstable; urgency=medium
[ Jochen Sprickerhof ]
* Replace ‐ with - in commands
[ Johannes Schauer Marin Rodrigues ]
* sbuild-qemu-update: pass exec args as list avoiding a sub-shell
* sbuild-qemu-update: add --verbose and --quiet
* sbuild-qemu-update: allow passing arbitrary extra options to qemu after
a double dash
* sbuild-qemu-update: add --boot option analogous to autopkgtest-virt-qemu
(Closes: #1061636)
[ Christian Kastner ]
* sbuild-qemu-create: add --boot option analogous to autopkgtest-build-qemu
* sbuild-qemu-boot: add --boot option analogous to autopkgtest-virt-qemu
* sbuild-qemu: add --boot option analogous to autopkgtest-virt-qemu
* sbuild-qemu-update: Add help message to --boot
* sbuild-qemu*: Update manpages for --boot
* sbuild-qemu-create: Remove APT lists to reduce image size.
* Bump copyrights
-- Christian Kastner <ckk@debian.org> Tue, 13 Feb 2024 19:59:25 +0100
sbuild (0.85.4) unstable; urgency=medium
* debian/tests/unshare-qemuwrapper:
- use hook directory copy-host-apt-sources-and-preferences
- explicitly choose unshare mode
* debian/tests/control:
- remove needs-root from unshare-qemuwrapper
- add dep on uidmap
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Thu, 26 Oct 2023 23:01:14 +0200
sbuild (0.85.3) unstable; urgency=medium
[ Lee Garrett ]
* Remove reference to bug that has been closed for 6 years
[ Johannes Schauer Marin Rodrigues ]
* debian/tests/unshare-qemuwrapper: use debvm
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Sun, 24 Sep 2023 01:06:51 +0200
sbuild (0.85.2) unstable; urgency=medium
* buildd: Demote lsb-base dependency to the lesser alternative.
-- Christian Kastner <ckk@debian.org> Sat, 11 Mar 2023 10:05:09 +0100
sbuild (0.85.1) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* add .mailmap
[ Christian Kastner ]
* Add myself to .mailmap
* Bump Standards-Version to 4.6.2 (no changes needed)
* sbuild-qemu: Properly handle --arch, --build, --host.
* sbuild-qemu: Fix broken --overlay-dir
* sbuild-qemu-update: Increase default timeout to 600s.
* sbuild-qemu-update: Add --timeout option
* sbuild-qemu-create: Add support for /root/.ssh/authorized_keys
* sbuild-qemu-create: Properly quote variables
* sbuild-qemu-boot: Set tty geometry to host's geometry
* sbuild-qemu-boot: Add option to forward SSH
-- Christian Kastner <ckk@debian.org> Fri, 10 Mar 2023 22:17:29 +0100
sbuild (0.85.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/Conf.pm: replace deprecated
Dpkg::Build::Info::get_build_env_allowed by
Dpkg::BuildInfo::get_build_env_allowed (Closes: #1027719)
* debian/control: bump libdpkg-perl dep to 1.21.14 because of
Dpkg::BuildInfo::get_build_env_allowed
* lib/Sbuild/ResolverBase.pm: copying debs can take a long time -- output log
messages
* the sbuild dummy repository should not be considered to create a deb-src
entry automatically
* lib/Sbuild/ChrootUnshare.pm: guard against empty /etc/subuid and
/etc/subgid
* debian/tests/unshare: uncompress source package before comparing to ignore
differences in the compression (dpkg recently started using threaded xz
compression for source packages)
* add get_default_release.py to figure out the archive used by the currently
running system
* debian/tests/unshare: put common sbuild invocation into a function
* debian/tests/unshare: do not run apt upgrade nor apt update
* debian/tests/control: add dependency on python3-apt
* debian/tests/unshare-qemuwrapper: do not cleanup apt list files or
otherwise we have to call apt update again later
* lib/Sbuild/Build.pm: reduce number of self->get_conf() calls
* debian/control: add debootstrap as dependency of
sbuild-debian-developer-setup
* bin/sbuild-createchroot: set MERGED_USR to 'auto' letting debootstrap
decide
* bin/sbuild-debian-developer-setup: inform the user where the chroot is and
that the current user has already been added to the sbuild group
[ Jochen Sprickerhof ]
* Make the DSC Dir configurable
[ Dave Jones ]
* Skip build-procenv when mknod would fail (Closes: #928364)
[ Benjamin Drung ]
* Fix building symlinks not ending on .dsc (Closes: #1012856)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Wed, 04 Jan 2023 14:04:05 +0100
sbuild (0.84.2) unstable; urgency=medium
[ Stefano Rivera ]
* fix autopkgtest LXD mode and sbuild-qemu (closes: #1024619)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Thu, 08 Dec 2022 10:20:58 +0100
sbuild (0.84.1) unstable; urgency=medium
[ Jochen Sprickerhof ]
* unshare_bind_mounts: use rbind to mount subtrees
* unshare: Use user/groupadd from outside the chroot
[ Johannes Schauer Marin Rodrigues ]
* Revert "bin/sbuild-createchroot: Do not hardcode mirror argument" as this
creates invalid deb-src entries in sources.list
-- Johannes Schauer Marin Rodrigues <josch@mister-muffin.de> Tue, 15 Nov 2022 08:05:31 +0100
sbuild (0.84.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* bin/sbuild-createchroot: die if move() fails
* bin/sbuild-debian-developer-setup: Don't alias to sid/UNRELEASED if suite
is not unstable (Closes: #1014574)
* debian/copyright: update copyright for makefiles and debian/*
* debian/tests/unshare-qemuwrapper: allow ~/.ssh to exist already
* debian/tests/unshare-qemuwrapper: bump disk size to 4G (Closes: #1016070)
* debian/tests/unshare: don't fail if gpghome cannot be removed
* debian/tests/unshare: gpgconf --kill all before removing gpghome
* debian/tests/unshare: run with --no-source-only-changes
* debian/tests/unshare: run with --nolog to output log to stdout
* lib/Sbuild/Build.pm: automatically add a deb-src entry if necessary
* lib/Sbuild/ResolverBase.pm: factor out add_extra_repositories()
* lib/Sbuild/ResolverBase.pm: stop emitting Packages.gz and Sources.gz
* man/sbuild-qemu-boot.1.in: fix typo Bood -> Boot
* man/sbuild.1.in: unshare chroot mode is not experimental anymore
[ Benjamin Drung ]
* Fix shellcheck issues in autopkgtests
* Revert "debian/tests/build-procenv: add deb-src repository"
* Run unshare autopkgtest against target release
* Set NO_PKG_MANGLE=1 when building dummy packages
* unshare-qemuwrapper: Cleanup guestfs appliance
* unshare-qemuwrapper: Disable SSH password authentication
* unshare-qemuwrapper: Support Ubuntu
* unshare-qemuwrapper: Use free port
* unshare-qemuwrapper: Use linux-image-cloud-amd64
* unshare-qemuwrapper: Use sbuild in temp directory name
[ Dave Jones ]
* Ensure umask is consistent with the comparison blobs
[ Christoph Berg ]
* run_autopkgtest: Accept exit 2 as pass
[ Andrea Pappacoda ]
* sbuild-debian-developer-setup: alias the chroot to UNRELEASED-$arch-sbuild
(Closes: #1006135)
[ Mattias Jernberg ]
* bin/sbuild-createchroot: Do not hardcode mirror argument to debootstrap
(Closes: #1010665)
[ Ben Westover ]
* sbuild-debian-developer-setup: Add option to specify chroot architecture
[ Jochen Sprickerhof ]
* Replace adduser by useradd
* Unshare: create sbuild group
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Wed, 02 Nov 2022 21:42:11 +0100
sbuild (0.83.2) unstable; urgency=medium
[ Jochen Sprickerhof ]
* Support $path in unshare backend
* Support systems without a resolv.conf in unshare backend
* Unshare: add minimal etc/hosts
[ Dave Jones ]
* verify() in unshare uses the same (wrong) parameter for $verify_*
* devscripts is missing from EXTRA_DEPS
* Update verify_deb to match zstd compressed debs
[ Johannes Schauer Marin Rodrigues ]
* lib/Sbuild/ChrootUnshare.pm: add /dev/{stdin,stdout,stderr}
* Mount a new instance of /dev/pts in the chroot
[ Aurelien Jarno ]
* Buildd::Mail: support MIME encoded Subject: header
* Buildd::Mail: also copy the Content-Type: header when forwarding mail
-- Aurelien Jarno <aurel32@debian.org> Mon, 29 Aug 2022 22:44:02 +0200
sbuild (0.83.1) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* bin/sbuild-cross-resolver: we don't need the English module (closes:
#1005957)
* debian/tests/unshare: run with -x
* lib/Sbuild/Utility.pm: add warning about missing libwww-perl (closes:
#1009859)
[ Jochen Sprickerhof ]
* lib/Sbuild/ChrootUnshare.pm: mkdir for bind mounts
[ Daniel Kahn Gillmor ]
* Use --batch with gpg when importing secret key (Closes: #1010171)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Tue, 26 Apr 2022 11:21:44 +0200
sbuild (0.83.0) unstable; urgency=medium
* sbuild-qemu (package):
- Support for new architectures: armhf, arm64, ppc64el
- Move vmdb2 to Depends
- Depend on autopkgtest (>= 5.17~)
* sbuild-qemu:
- Fix looking for images when --arch was specified
- sbuild-qemu: rename --ram to --ram-size. This matches the
autopkgtest-virt-qemu option
- Reduce default CPU count to 2, rather than equal to host cores. This is
more likely to work on all platforms
* sbuild-qemu-create:
- Update shared dir setup (deprecated QEMU syntax). Existing images will no
longer work and will need to be recreated
* sbuild-qemu-update:
- Fix QEMU launch issues (network, serial)
- Reduce memory requirement. 1GiB is sufficient for apt-get operations
* sbuild-qemu-boot: New utility to boot to a VM console
-- Christian Kastner <ckk@debian.org> Sat, 05 Feb 2022 18:02:40 +0100
sbuild (0.82.1) unstable; urgency=medium
* fix sbuild-cross-resolver
* copy solvers from /usr/lib/apt/solvers into chroot if cross-building
* add dependency on apt-utils for /usr/lib/apt/solvers/apt
* chown /var/lib/sbuild 755 so that the _apt user can read apt.conf inside it
* remove maintainer script support for ancient package versions
* debian/control: bump Standards-Version (no changes)
* debian/source/include-binaries is not needed anymore
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Sat, 29 Jan 2022 16:52:05 +0100
sbuild (0.82.0) unstable; urgency=medium
[ Johannes Schauer Marin Rodrigues ]
* remove etc/99builddsourceslist as it is unused
* bin/sbuild-createchroot: avoid allowing execution of arbitrary Perl code
via a custom mirror URL (closes: #1001807)
* debian/tests/build-procenv: add deb-src repository
* debian/tests/unshare-qemuwrapper: use copy:// instead of file://
* man/sbuild.1.in: document the --arch-all and --no-arch-all defaults while
cross-building
* lib/Sbuild/ChrootUnshare.pm: also create /dev/console and /dev/ptmx and
mount /dev/pts and /dev/shm
* lib/Sbuild/Build.pm: fix error reporting of 'changes.new could not be
renamed'
* add sbuild-cross-resolver filtering out m-a:foreign and essential:yes
packages that are not arch:all and not arch:native during cross-building
* bump debhelper-compat to 13
* use dh-sequence-python3 instead of --with=python3
* run wrap-and-sort
* add myself to d/copyright -- better late than never ;)
* debian/control: add uidmap to Recommends (closes: #986962)
* use debian/*.manpages instead of debian/*.install to install manpages
* add UNSHARE_BIND_MOUNTS allowing to bind-mount directories into the chroot
in unshare mode (closes: #986694)
[ Samuel Thibault ]
* control: Fix git URLs.
[ Christian Kastner ]
* sbuild.1: Refresh unshare info
[ Jochen Sprickerhof ]
* Don't overwrite BUILD_DIR when compiling in src dir (Closes: #990734)
[ Vagrant Cascadian ]
* lib/Sbuild/Utility.pm: Add support for zstd compression. (Closes: #987655)
-- Johannes Schauer Marin Rodrigues <josch@debian.org> Mon, 24 Jan 2022 23:30:27 +0100
sbuild (0.81.2) unstable; urgency=medium
* Package sbuild-qemu should be arch:all, not arch:amd64.
Resolves a FTBFS.
-- Christian Kastner <ckk@debian.org> Sun, 31 Jan 2021 15:34:54 +0100
sbuild (0.81.1) unstable; urgency=medium
* lib/Sbuild/ChrootUnshare.pm: also ignore /dev/console when unpacking
rootfs becauke mknod is forbidden in unshare mode
* lib/Sbuild/Build.pm: add comment about #977674
* bin/sbuild: use umask 0022 as default for Debian -- see dpkg source:
scripts/Dpkg/Vendor/Debian.pm
* lib/Sbuild/Build.pm: run dpkg-buildpackage with --sanitize-env if dpkg
1.20.0 is available
* add new unshare autopkgtest with qemu wrapper
-- Johannes 'josch' Schauer <josch@debian.org> Sun, 31 Jan 2021 10:41:30 +0100
sbuild (0.81.0) unstable; urgency=medium
[ Johannes 'josch' Schauer ]
* make 'none' explicitly disable the bd-uninstallable-explainer.
Thanks helmut & vagrantc
[ Jochen Sprickerhof ]
* Cleanup link in /etc/sbuild if it exists
[ Christian Kastner ]
* Add package sbuild-qemu, replaces qemu-sbuild-utils
- The utilities have been renamed from qemu-sbuild-* to sbuild-qemu-* to
for consistency
* Add myself to Uploaders
* Set Rules-Requires-Root: no
* Bump Standards-Version to 4.5.1
[ Bruno Kleinert ]
* Removed obsolete script /usr/share/sbuild/create-chroot to fix 'bullseye:
/updates -> -security'. Neither sbuild itself, nor any reverse dependency
appear to depend on that script, so removed it. (Closes: #972747)
-- Johannes 'josch' Schauer <josch@debian.org> Sun, 24 Jan 2021 23:13:34 +0100
sbuild (0.80.1) unstable; urgency=medium
* Fix build system to rely on debian/changelog instead of VERSION file
* use mkdir -p when creating build_path (thanks Niels Thykier)
-- Johannes 'josch' Schauer <josch@debian.org> Sat, 05 Dec 2020 17:46:22 +0100
sbuild (0.80.0) unstable; urgency=medium
[ Johannes 'josch' Schauer ]
* New release
* Convert packaging to a native package to make maintenance easier by
avoiding the complicated upstream release and debian packaging procedure
* lib/Sbuild/Conf.pm: fix example for individual_stalled_pkg_timeout
(closes: #924500)
* man/sbuild.1.in: remove from docs of --autopkgtest-virt-server-opts
(closes: #948799)
* lib/Sbuild/Build.pm: check for defined-ness and even print a '0' Version
(closes: #950939)
* debian/control: due to using Dpkg::Build::Info::get_build_env_allowed, we
now require libdpkg-perl (>= 1.20)
* man/sbuild.1.in: starting/finished/failed-build-commands are run as root
(closes: #961623)
* bin/sbuild-createchroot: chown root dir 0755 (closes: #950684)
* use Dpkg::Build::Info::get_build_env_allowed instead of deprecated
Dpkg::Build::Info::get_build_env_whitelist for dpkg >= 1.20.0
(closes: #963845, #966428)
[ Pierre-Elliott Bécue ]
* Workaround to pass on dpkg-genchanges specific options until dpkg bug
#902856 is fixed (closes: #884428, #891247, #917849, #947755)
-- Johannes 'josch' Schauer <josch@debian.org> Sat, 01 Aug 2020 14:07:53 +0200
sbuild (0.79.1-1) unstable; urgency=medium
* Team upload.
* New upstream release.
* add option --dpkg-file-suffix to buildd
* switch to debhelper compat 12
* switch dh_installinit call to --no-stop-on-upgrade
* buildd: remove calls to dpkg-maintscript-helper
* test build-procenv: replace ADTTMP with AUTOPKGTEST_TMP
-- Ivo De Decker <ivodd@debian.org> Wed, 22 Apr 2020 22:35:33 +0000
sbuild (0.79.0-1) unstable; urgency=medium
* Team upload.
* New upstream release.
* remove debian/patches (have been applied upstream)
* add buildd depends on devscripts and recommends on sudo (closes: #920335,
#774856)
* debian/tests/build-procenv: don't install packages from a different distro
(closes: #928366)
* pass the right .changes file to lintian (closes: #934721)
* sbuild-createchroot: use umask 0022 (closes: #921675)
* fix etc/sbuild-debian-developer-setup-update-all (closes: #922148)
* add apt_keep_downloaded_packages option (closes: #933723)
* add option --dpkg-file-suffix
-- Ivo De Decker <ivodd@debian.org> Wed, 05 Feb 2020 17:41:38 +0100
sbuild (0.78.1-2) unstable; urgency=medium
[ Mike Gabriel ]
* debian/patches: Add support-gzip-in-wheezy.patch. The gzip command
in Debian wheezy lacks support for the --keep cmdline option, so
avoid using it. (closes: #926161)
[ Aurelien Jarno ]
* debian/patches: Add fix-disk-space-directory-check.patch. The right
directory has to be checked inside the chroot. (closes: #923484)
-- Johannes 'josch' Schauer <josch@debian.org> Wed, 03 Apr 2019 14:08:12 +0200
sbuild (0.78.1-1) unstable; urgency=medium
* New upstream release.
* fix syntax of generated Sources.gz files (Closes: #920227)
-- Johannes 'josch' Schauer <josch@debian.org> Sat, 09 Feb 2019 07:25:07 +0100
sbuild (0.78.0-2) unstable; urgency=medium
* Fix debian/sbuild-debian-developer-setup.postrm by removing wrong default
case
-- Johannes 'josch' Schauer <josch@debian.org> Thu, 10 Jan 2019 17:03:25 +0100
sbuild (0.78.0-1) unstable; urgency=medium
* New upstream release.
* remove debian/patches (have been applied upstream)
* Add libc-dev and libstdc++-dev when cross compiling (closes: #905346)
* default to --no-arch-all for cross builds (closes: #905347)
* Set build profiles cross and nocheck by default when cross building
(closes: #905345)
* bin/sbuild-createchroot: allow an empty lost+found directory in the target
directory (closes: #909378)
* add --no-source-only-changes option (closes: #904968)
* sbuild-createchroot: Do not check for empty directory if --setup-only
option is used (closes: #916009)
* do not check debian/tests/control when running autopkgtest (closes:
#916924)
* add sbuild and BUILD_USER if they didn't exist yet (closes: #911979)
* let --append-to-version imply --no-arch-all like it's the case for
--make-binNMU (closes: #911399)
* allow chroots with nothing more but Essenital:yes packages, apt and their
hard dependencies and create missing users and groups as needed
(closes: #909847)
* run wrap-and-sort
* let sbuild Suggests e2fsprogs for /usr/share/sbuild/create-chroot (closes:
#887264)
* remove /var/log/sbuild-update-all.log if sbuild-debian-developer-setup
gets purged (closes: #905513)
* bump debhelper compat to 11
* debian/control: bump Standards-Version to 4.3.0 (no changes)
-- Johannes 'josch' Schauer <josch@debian.org> Wed, 09 Jan 2019 05:53:49 +0100
sbuild (0.77.1-2) unstable; urgency=medium
* Add patch allowing to control merged /usr (closes: #913228)
-- Johannes 'josch' Schauer <josch@debian.org> Tue, 13 Nov 2018 16:07:19 +0100
sbuild (0.77.1-1) unstable; urgency=medium
* New upstream release.
* Run dpkg-source --before-build and --after-build (closes: #886633)
* Move sbuild-debian-developer-setup man page to correct package (closes:
#907076)
-- Johannes 'josch' Schauer <josch@debian.org> Tue, 11 Sep 2018 00:08:08 +0200
sbuild (0.77.0-4) unstable; urgency=medium
* Add patch to fix the empty directory check of sbuild-create-chroot
(closes: #904722)
-- Johannes 'josch' Schauer <josch@debian.org> Fri, 27 Jul 2018 14:03:10 +0200
sbuild (0.77.0-3) unstable; urgency=medium
* Patch sbuild-destroychroot with an import of SchrootInfo (closes: #903513)
-- Johannes 'josch' Schauer <josch@debian.org> Wed, 11 Jul 2018 21:32:04 +0200
sbuild (0.77.0-2) unstable; urgency=medium
* Install /usr/sbin/sbuild-adduser and /usr/sbin/sbuild-destroychroot again
(closes: #903269)
-- Johannes 'josch' Schauer <josch@debian.org> Sun, 08 Jul 2018 15:52:22 +0200
sbuild (0.77.0-1) unstable; urgency=medium
* New upstream release.
* debian/control: move "exim4 | mail-transport-agent" from Recommends to
Suggests (closes: #863718)
* Set maintainer address to sbuild@packages.debian.org (closes: #899688)
* lib/Sbuild/Build.pm: filter out foreign essential and multiarch foreign
packages before passing them to dose3 (closes: #865432)
* man/sbuild.1.in: pre- and post-build-commands are run as non-root (closes:
#900916)
* Add null resolver which does not install, upgrade or remove any packages
(closes: #858899)
* lib/Sbuild/ResolverBase.pm: also print kernel version (closes: #866402)
* lib/Sbuild/Build.pm: install (cross-)build-essential, manual depends and
build depends with a single dummy package (closes: #871968)
* lib/Sbuild/Build.pm: dump .dsc content before extracting it (closes:
#901727)
* Add config variables that allow sbuild to fail if lintian, piuparts or
autopkgtest fail (closes: #891590)
* lib/Sbuild/ResolverBase.pm: run dpkg-scanpackages with -m to allow
multiple architectures of the same package (closes: #886257)
* lib/Sbuild/Build.pm: additional Lintian reasons info and warn (closes:
#893228)
* man/sbuild.1.in: fix typo (closes: #891588)
* lib/Sbuild/Build.pm: also cope with special characters when filtering the
log (closes: #901730)
* Add new log filtering for /build/pkg-minimal-XXX/resolver-YYY:
<<RESOLVERDIR>> (closes: #901725)
* lib/Sbuild/Build.pm: only run autopkgtest if debian/tests/control exists
(closes: #901167)
* lib/Sbuild/Options.pm: --make-binNMU implies --no-arch-all (closes:
#898946)
* etc/sbuild-update-all: set executable bit (closes: #870451)
* lib/Sbuild/ChrootSetup.pm: If BUILD_PATH is set, use it instead of /build
(closes: #868657)
* lib/Sbuild/ResolverBase.pm: clean /var/cache/apt/archive/*.deb after
package installation (closes: #861762)
* bin/sbuild-createchroot: also check exit status of schroot (closes:
#866006)
* Replace httpredir.debian.org with deb.debian.org (closes: #901372)
* lib/Sbuild/ChrootSetup.pm: run groupadd instead of copying entry from host
(closes: #867180)
* man/sbuild-createchroot.8.in: fix outdated path in text description
(closes: #901360)
* bin/sbuild-createchroot: error out early when the target directory exists
and is not empty (closes: #888710)
* Remove support for signing the dummy archive (closes: #837188)
* I now detect more directly if the source wasn't yet unpacked (closes:
#882057)
* debian/control: replace priority:extra by optional
* debian/copyright: use secure copyright format uri
* debian/copyright: fix some outdated information now that sbuild lives on
salsa
* debian/control: update vcs-git and vcs-browser to salsa
* debian/control: fix my name
* debian/control: depend on real cron as first alternative before virtual
cron-daemon
* debian/control: add alternative default-mta before mail-transport-agent
* debian/sbuild.postinst: avoid recursive chown
-- Johannes 'josch' Schauer <josch@debian.org> Fri, 06 Jul 2018 23:11:45 +0200
sbuild (0.76.0-1) unstable; urgency=medium
* Install sbuild-debian-developer-setup-update-all cronjob (closes: #893577)
-- Michael Stapelberg <stapelberg@debian.org> Mon, 09 Apr 2018 18:58:38 +0200
sbuild (0.75.0-1) unstable; urgency=medium
* New upstream release.
* buildd: only build arch:any packages (closes: #893608)
* buildd: do not run lintian
* remove harmful unnecessary lintian binary check (closes: #893226)
-- Michael Stapelberg <stapelberg@debian.org> Wed, 21 Mar 2018 22:24:01 +0100
sbuild (0.74.0-1) unstable; urgency=medium
* New upstream release
* Install dose-distcheck and lintian for the native architecture
* remove DCMD config value which is not used and just uselessly making
libsbuild-perl depend on devscripts
* use dpkg-query instead of grep-status so that dependency on grep-dctrl is
not needed anymore
* suppress schroot writing to stderr in sbuild-createchroot
* check for modprobe in sbuild-createchroot
* Add missing newline character to a bunch of error messages
* dose3 failures no longer mask the --build-deps-failed-commands
* Build arch: all packages by default (closes: #870263)
* Run lintian by default (closes: #870263)
* sbuild-createchroot: add --command-prefix (closes: #870260)
* add sbuild-debian-developer-setup package (closes: #859867)
-- Michael Stapelberg <stapelberg@debian.org> Wed, 14 Mar 2018 21:55:42 +0100
sbuild (0.73.0-4) unstable; urgency=medium
* Retroactively add two entries into debian/NEWS for the Stretch release.
-- Johannes Schauer <josch@debian.org> Tue, 24 Jan 2017 10:58:18 +0100
sbuild (0.73.0-3) unstable; urgency=medium
* Add patch installing dose-distcheck in the native architecture
* Refresh other patches as "git format-patch" from sbuild git master branch
-- Johannes Schauer <josch@debian.org> Sun, 22 Jan 2017 15:03:49 +0100
sbuild (0.73.0-2) unstable; urgency=medium
* Bump build-depends on libdpkg-perl to 1.18.14 as sbuild is using
Dpkg::Build::Info now (closes: #850075)
-- Johannes Schauer <josch@debian.org> Wed, 04 Jan 2017 08:17:08 +0100
sbuild (0.73.0-1) unstable; urgency=medium
* New upstream release
* man/sbuild.1.in: clarify docs for --append-to-version and --make-binNMU
(closes: #844583)
* Allow passing a directory to --extra-package which will add all .deb inside
(closes: #844457)
* Unconditionally update repositories given via --extra-repository
(closes: #842281)
* For binNMUs, instead of copying the timestamp of the last changelog entry,
generate a new one (closes: #843773)
* Output build type in buildlog in the format used by dpkg-buildpackage
--build (closes: #820977)
* Install extra packages into their own internal repository which is created
at resolver creation time so that extra packages are considered during the
upgrade step (closes: #843694)
* Also output .buildinfo in buildlog (closes: #843933)
* pass the absolute path of extra .deb package to dpkg-deb (closes: #843692)
* Always pass the source package to lintian (closes: #843622)
* Do not print negative used space but n/a instead (closes: #842947)
* bin/sbuild-apt: pass --yes to apt operations as the apt operations are not
interactive (closes: #842138)
* Do not set 'Changes File' in copy_changes to avoid it being set to the
source-only changes file (closes: #842705)
* starting-build-command and finished-build-commands are now run as root.
* The autopkgtest-virt backends are no longer supplied with the chroot name.
* Add SBUILD_BUILD_ARCH percent escape.
* Use Dpkg::Build::Info::get_build_env_whitelist() to generate the default of
ENVIRONMENT_FILTER.
* Add the --binNMU-timestamp command line option to allow one to pass a
custom timestamp for the new binNMU changelog entry.
* Add option --binNMU-changelog which allows one to pass a complete
debian/changelog entry for binary-only builds.
* The autopkgtest backend now runs into its own process group.
* Bump sbuild Depends on libdpkg-perl to at least 1.18.14 because of its use
of Dpkg::Build::Info::get_build_env_whitelist()
* Move most Build-Depends to Build-Depends-Indep
* Drop dependency and build dependency on libio-zlib-perl which is provided
by perl-modules even in old-stable
* Drop dependency on apt-utils because sbuild does not use apt-ftparchive
anymore
* Do not let libsbuild-perl depend on adduser, dctrl-tools and devscripts as
it doesn't use them.
* Make schroot and autopkgtest Recommends as they are both working backends
* Run dh_installinit with --no-start and --no-restart-on-upgrade so that the
buildd daemon does not get started on installation (closes: #842057)
* Update autopkgtest
- Don't sign internal dummy repository anymore
- Download source package inside the build chroot because the host might
not be having the requested release in its sources.list
- Do not depend on procenv build depends as they should be installed
inside the build chroot and not on the host
- use "apt install" instead of "dpkg -i" to also install dependencies
- Several tiny fixes to make the test suite succeed again
* Make schroot a hard dependency of buildd (it requires
/etc/schroot/chroot.d/ in its postinst script)
* Add patch to remove DCMD config value which is not used and just uselessly
making libsbuild-perl depend on devscripts
* Add kmod to Suggests of sbuild because modprobe is optionally used by
sbuild-createchroot
* Add patch to use dpkg-query instead of grep-status so that dependency on
grep-dctrl is not needed anymore
* Add patch that suppresses schroot writing to stderr in sbuild-createchroot
* Add patch that checks for modprobe in sbuild-createchroot
* Remove xs-testsuite header from debian/control
* Adapt libsbuild-perl short description to not say "Tool" anymore but
"Library"
* Replace git:// in Vcs-Git field by https://
* Bump Standard-Version to 3.9.8 (no changes required)
* Convert debian/copyright to DEP-5 (make machine readable)
-- Johannes Schauer <josch@debian.org> Sat, 24 Dec 2016 02:28:48 +0100
sbuild (0.72.0-2) unstable; urgency=medium
* Fix regression from 0.72.0 upload: install forward file as .forward and
not as buildd.forward (closes: #842057)
* Add myself to Uploaders
-- Johannes Schauer <josch@debian.org> Wed, 26 Oct 2016 08:47:50 +0200
sbuild (0.72.0-1) unstable; urgency=medium
* New upstream release
* Remove all patches (they have been integrated upstream)
* Convert package to dh 10, allowing the most simple d/rules file.
* Remove Roger Leigh from the Uploaders field (they left Debian)
* Add dependency of buildd on lsb-base (>= 3.0-6) because of the init script
it ships (/etc/init.d/buildd)
* lib/Sbuild/Build.pm: fixing that if build() raises an exception then build
time and space doesn't get set (closes: #835338)
* lib/Sbuild/AptitudeResolver.pm: Do not add architecture qualifiers to
dependencies if chroot doesn't support multiarch (closes: #836737)
* lib/Sbuild/Build.pm: Don't do architecture check if BUILD_SOURCE is true
(closes: #836154)
* lib/Sbuild/ChrootSudo.pm: Instead of forbidding single quotes, properly
quote the exec string (closes: #836175)
* When printing ASCII art boxes, cater for the situation where their content
is longer than their default width by increasing the box width (closes:
#841015)
* bin/sbuild-createchroot: do not overwrite /etc/hosts if it already existed
and also write ipv6 entries if it didn't (closes: #841165)
* sbuild-createchroot: clean up downloaded .deb archives (closes: #841169)
* Add --bd-uninstallable-explainer and make dose3 the default (closes:
#839566)
* Warn if a binary package of incompatible architecture with the chroot is
added via --extra-package (closes: #820882)
* Accommodate for the autopkgtest 4.0 release by renaming all adt command
line options and configuration variables from adt to autopkgtest because
the same renaming was done by the autopkgtest release (closes: #833436)
* Add Depends on gnupg (>= 2.1) because sbuild now makes use of features
like --pinentry-mode=loopback for key creation (closes: #840575)
-- Johannes Schauer <josch@debian.org> Tue, 25 Oct 2016 07:43:07 +0200
sbuild (0.71.0-2) unstable; urgency=medium
* add patch to not check for the fakeroot binary on the host. Thanks
Gianfranco Costamagna
* Do not recommend fakeroot anymore. It is not needed on the host but only
inside the chroot.
-- Johannes Schauer <josch@debian.org> Sat, 27 Aug 2016 11:20:06 +0200
sbuild (0.71.0-1) unstable; urgency=medium
* add autopkgtest to Suggests
* Undo exporting private keys in armored ASCII format as introduced by the
last release. It turns out, that this is not necessary to support gpg
cross-version compatibility. This should fix problems with gpg 2.x as well
as chroots not having gpg installed as apt stopped depending on it.
(closes: #827315, #834898)
* Undo the SUITE-VARIANT syntax of sbuild-createchroot as introduced by the
last release. It turns out that overloading the suite name argument with a
variant name was a bad idea because there exist distributions with a minus
in its name. Variant names can now be specified using the --chroot-prefix
option which works analogous to the --chroot-suffix option. (closes:
#834515)
* Add percent escape support to piuparts, autopkgtest and adt-virt options.
(closes: #833285, #833286)
* Add sbuild-destroychroot.
* Allow running autopkgtest when sbuild downloads the .dsc (closes: #833549)
* Run apt-cache without --only-source (closes: #834704)
* Avoid dropping extra repositories before using them (closes: #834497)
* lib/Sbuild/ResolverBase.pm: Fix copypaste error s/public/private/ (closes:
#834330)
* lib/Sbuild/ChrootSetup.pm: don't prompt the user during --keygen (closes:
#833547)
* Add an option to not prefix piuparts and autopkgtest with anything at all
(closes: #833390)
* lib/Sbuild/Build.pm: add red/green coloring to log when piuparts or
autopkgtest succeed/fail (closes: #833552)
-- Johannes Schauer <josch@debian.org> Wed, 24 Aug 2016 13:42:26 +0200
sbuild (0.70.0-1) unstable; urgency=medium
* new upstream version
- Fix reproducibility issue by not writing the $HOME as set during the
build into config files and man pages anymore (closes: #825991)
- Add an EXAMPLE section to the sbuild man page (closes: #824582)
- sbuild-createchroot now has support for SUITE-VARIANT chroot names. This
is useful to create variants of base suits like jessie-backports or
unstable-experimental. (closes: #826957)
- sbuild-createchroot now has the --no-deb-src option which allows one to
create a chroot without a deb-src entry in its sources.list. This is
useful to save bandwidth and disk space for chroots that will never be
used to download source packages as the source indices do not have to
downloaded, stored and later updated from the mirrors. (closes: #826847)
- sbuild-createchroot now has the --alias option which is useful to add a
shorthand alias to a chroot which will be used for chroot selection. This
is for example useful for a Debian unstable chroot which will be
automatically selected for package builds that have UNRELEASED in their
debian/changelog, if the UNRELEASED alias is added to the Debian unstable
chroot. (closes: #800593)
- suild-createchroot now has the --extra-repository which works like the
--extra-repository option for sbuild and permanently adds another line to
the chroot's sources.list.
- Private/public key pairs are now stored in armored ASCII format to
maintain compatibility between different gpg versions on the host and
within the chroot. Re-running `sbuild-update --keygen` will create the
new key types.
- Chroots can now have gpg >= 2.x installed as sbuild will properly clean
up any remaining gpg-agent processes and "apt-key add" is not used
anymore (it will leave a gpg-agent process around that cannot properly
be killed).
- Add the --source-only-changes option which will create a .changes file
suitable for a source-only upload alongside the normal binary .changes
file. (closes: #812361)
- Do not install debfoster by default in sbuild-createchroot to keep the
build chroot as minimal as possible. Users that use debfoster can use the
--include option of sbuild-createchroot.
- Drop requirement for gpg inside the chroot as external archive keys are
now processed without gpg and signing of the internal repository is
entirely optional with helpful warning and error messages in case
signing failed. (closes: #831462)
- Allow running autopkgtest after a successful build in the same manner
that piuparts can be run after a successful build. (closes: #824935)
- fix uninitialized value problem in loop (closes: #823993)
- Fix typo in APT::Get::AllowUnauthenticated config setting
(closes: #824165)
- Add up correct size when looping over files (closes: #825359)
- Make sure printed timestamps are in C locale, in UTC and in standard
formats (closes: #813895)
- Move addition of extra repositories from the creation of the dummy build
dependency repository to the initial setup (closes: #792037)
- Fix execution of man (closes: #831063)
* Remove patches
0001-lib-Sbuild-ResolverBase.pm-do-not-produce-non-error-.patch and
0001-bin-sbuild-createchroot-fix-chown-chmod-error-checks.patch as they
were merged upstream.
-- Johannes Schauer <josch@debian.org> Wed, 03 Aug 2016 10:58:48 +0200
sbuild (0.69.0-2) unstable; urgency=medium
* add patch 0001-lib-Sbuild-ResolverBase.pm-do-not-produce-non-error-.patch
to make sbuild not print on stderr during sbuild-update unless it is an
error (closes: #823788)
* 0001-bin-sbuild-createchroot-fix-chown-chmod-error-checks.patch which
fixes error checking of chown and chmod calls in sbuild-createchroot
(closes: #823897)
-- Johannes Schauer <josch@debian.org> Thu, 12 May 2016 07:36:32 +0200
sbuild (0.69.0-1) unstable; urgency=medium
* new upstream version
- Decouple chroot from host in terms of filesystem access to allow
chroot backends like qemu, ssh or lxc. Deprecate external command
percentage escape %SBUILD_CHROOT_DIR in favour of %SBUILD_CHROOT_EXEC.
- Experimental adt backend. Enable with --chroot-mode=adt. Choose the
virtualization server with --adt-virt-server and add options with
--adt-virt-server-opt. This allows sbuild to use qemu, ssh and lxc
chroots.
- Build packages without specifying a version. Earlier it was possible to
let sbuild "apt-get download" a dsc by specifying "package_version" as a
command line argument. The version part is not necessary anymore. No
manual version lookup by the user is required anymore. (closes: #693928)
- Disallow conflicting command line options, thus making command line
switches position independent and remove the deprecated --arch-all-only
option in the process.
- The aspcud resolver criteria is not hardcoded anymore but can be chosen
with --aspcud-criteria. The default criteria is -removed,-changed,-new.
To minimize the number of packages from experimental, use:
-count(solution,APT-Release:=/a=experimental/),-removed,-changed,-new
(closes: #821376)
- Apt doesn't download translations anymore.
- Dummy archive is now signed with SHA-512
- Cron script etc/sbuild-update-all allows one to periodically update all
sbuild chroots. (closes: #776438)
- Add another --*-failed-commands external command:
--chroot-update-failed-commands (closes: #803505)
- Documentation of configuration options in sbuild.conf(5) and in
/etc/sbuild/sbuild.conf now reference related command line options from
sbuild(1).
- Documentation of command line options in sbuild(1) now references the
respective configuration options from sbuild.conf(5).
- Remove configuration options which can be set on the command line from
the __INTERNAL group, thus exposing them in sbuild.conf as well and
referencing them in sbuild(1).
- Replace single by double quotes in external command (closes: #816493)
- Parse "apt-cache showsrc" output using Dpkg::Index (closes: #818579)
- Fix permissions of temporary directories (closes: #798835)
- Fix signing of build results (closes: #817121)
- do not remove architectures when cloned chroot is in use
(closes: #811558)
- check for overlayfs support (closes: #813360)
-- Johannes Schauer <josch@debian.org> Sun, 08 May 2016 14:43:04 +0200
sbuild (0.68.0-1) unstable; urgency=medium
* new upstream version
- Fix quoting when checking architectures (closes: #809175)
- bin/sbuild-createchroot: check for defined-ness first before using eq
(closes: #811042)
- When cross compiling, install dummy binary package instead of using
'apt-get build-dep'. See upstream commit #e227c8f3 for an extensive
rationale. (closes: #809730)
- Do architecture check after build-essential is installed (closes: #700317)
- Create directory where tarball is stored (closes: #811040)
- lib/Sbuild/ChrootInfoSchroot.pm: check if get_info_from_stream() was
successful and don't check if closing the pipe was successful if not
(closes: #811041)
- Extend explanation of --source and --no-source options (closes: #700317)
- Add documentation related to generated build artifacts (closes: #782553)
- Deprecate command line option --arch-all-only in favour of --arch-all
--no-arch-any. This option will be removed in the next upstream release.
* drop patch fix-quoting.patch as it has been applied upstream
-- Johannes Schauer <josch@debian.org> Fri, 15 Jan 2016 10:18:53 +0100
sbuild (0.67.0-2) unstable; urgency=medium
* backport patch fix-quoting.patch (closes: #809175)
-- Johannes Schauer <josch@debian.org> Mon, 28 Dec 2015 03:23:42 +0100
sbuild (0.67.0-1) unstable; urgency=medium
* fix Vcs-Browser and Vcs-Git fields to point at the debian/unstable branch
(closes: #805063)
* add Suggests: libwww-perl to libsbuild-perl because it can optionally make
use of LWP::UserAgent (closes: #703814)
* new upstream version
- ./man/sbuild.1.in: improve documentation of external commands
(closes: #802678)
- bin/sbuild: add --clean-source and --no-clean-source to allow building a
package from an unpacked directory without calling debian/rules clean
(closes: #655215)
- allow changing the user running dpkg-buildpackage inside the chroot
(closes: #661037)
- Check architecture wildcard matching with dpkg inside the chroot to avoid
situations in which dpkg outside the chroot doesn't know about a new
architecture yet (closes: #691539)
- lib/Sbuild/Build.pm: say --build instead of incorrect --build-arch
(closes: #709270)
- bin/sbuild-createchroot: honor --foreign (closes: #709864)
- man/sbuild-setup.7.in: correct section 8 for sbuild-createchroot and
sbuild-adduser (closes: #713033)
- Fix permission of public key (closes: #726866)
- sbuild-createchroot: use union-type=overlay for directory chroot and
promote tarball chroot in the manpage (closes: #751732)
- sbuild-createchroot: run debootstrap with --no-check-gpg if --keyring=""
is passed (closes: #760832)
- Quit processing when external commands fail (closes: #774351)
- bin/sbuild-createchroot: check if chroot already exists before creating a
new one (closes: #782534)
- Print better message when no chroot is specified (closes: #786456)
- Add the --no-arch-any and --arch-any options
- Successfully handle a source only build. (Closes: #799056)
- lib/Sbuild.pm: improve error message about sbuild group membership
(closes: #800317)
- bin/sbuild: turn path to input dsc or source directory into an absolute
path (closes: #801436)
- Set [trusted=yes] for internal dummy repository to make key generation
optional (closes: #801798)
- have a default for CROSSBUILD_CORE_DEPENDS (closes: #806931)
- lib/Sbuild/Chroot.pm: apply environment filter *before* setting
environment variables set by sbuild itself (closes: #807488)
- lib/Sbuild/ChrootInfo.pm: fix error handling (closes: #808290)
- lib/Sbuild/Build.pm: make sure regex only matches lines in the Files
field (closes: #808560)
* drop all patches which have now been applied upstream
-- Johannes Schauer <josch@debian.org> Sat, 26 Dec 2015 15:19:29 +0100
sbuild (0.66.0-5) unstable; urgency=medium
* Backport commit 6456b3da to make sbuild binary packages reproducible
independent of the build architecture and the build user (closes: #801882)
-- Johannes Schauer <josch@debian.org> Fri, 16 Oct 2015 07:26:52 +0200
sbuild (0.66.0-4) unstable; urgency=medium
* Backport commit 297dc84a fixing a regression in parsing the output of
`schroot --info` introduced by commit 8a3e12c3 and leading to
sbuild-update not updating the schroot. (closes: #801572)
-- Johannes Schauer <josch@debian.org> Wed, 14 Oct 2015 10:32:58 +0200
sbuild (0.66.0-3) unstable; urgency=medium
* backport commit 91229d5a calling deps_parse() with build_dep => 1 (closes:
#801637, #801400)
-- Johannes Schauer <josch@debian.org> Tue, 13 Oct 2015 13:08:47 +0200
sbuild (0.66.0-2) unstable; urgency=medium
* make changelog entry for 0.66.0-1 more explicit wrt the closed bugs.
-- Johannes Schauer <josch@debian.org> Mon, 05 Oct 2015 09:54:58 +0200
sbuild (0.66.0-1) unstable; urgency=medium
* new upstream version
* demote exim4 to Recommends (Closes: #774310)
* use dpkg --assert-multi-arch to check for multi-arch support (Closes:
#793561)
* allow to set custom configuration file through $SBUILD_CONFIG environment
variable (Closes: #790354)
* look for a BUILD_ARCH chroot instead of HOST_ARCH (Closes: #793951)
* Move running of pre-build-commands until after 'Chroot Dir' is defined
to prevent the %SBUILD_CHROOT_DIR percentage escape being empty when
running the pre-build-commands hook (Closes: #774359)
* external commands are now unparsed strings (Closes: #782672)
* properly setup buildd unstable chroot (Closes: #731062)
* Replaced all unicode-printed chars with plain ASCII (Closes: #665847,
#765886)
* Add --extra-repository-key flag for extra apt keys (Closes: #796539)
* Add a new --arch-all-only option (Closes: #657392)
* Instead of explicitly requesting core packages of the build architecture,
use :native (Closes: #798323)
* Report a proper error message in case /var/lib/sbuild inside the chroot is
not writable (Closes: #797783)
* close and unlink temporary files created by File::Temp::tempfile() (Closes:
#775091)
* external command %SBUILD_SHELL produces an interactive shell (Closes:
#783091)
* If Build-Depends can't be parsed, I now error loudly (Closes: #783335)
* consider stderr as well as stdout before timeout (Closes: #731940)
* make symlink to build log relative if in same directory (Closes: #685416)
* Handle $session being undefined properly (Closes: #745851, #798568,
#790547)
* man/sbuild.1.in: update docs for --dist option (Closes: #783135)
* sbuild-createchroot(8): default suffix is -sbuild, not -chroot (Closes:
#774521)
* Correct inaccurate dpkg Multi-Arch support comment (Closes: #793560)
* Fix call to add_foreign_architecture to actually have an effect (Closes:
#793359)
* Fix crossbuild dependency resolution for apt and aptitude (Closes: #770407)
* create ~/.gnupg if it did not exist before when running sbuild-update
(Closes: #792100)
* use httpredir.debian.org instead of ftp.debian.org or ftp.uk.debian.org
(Closes: #792092)
* add --build-path option and configuration variable to set a deterministic
build path (Closes: #790868)
-- Johannes Schauer <josch@debian.org> Sun, 04 Oct 2015 09:50:02 +0200
sbuild (0.65.2-1) unstable; urgency=medium
* Team upload.
[ Ansgar Burchardt ]
* Sort keys in hashes dumped to sbuild.conf and sbuild.conf.man.
Thanks to Reiner Herrmann for the patch.
(Closes: #778482, #764504)
* sbuild-createchroot: set profile=sbuild also for tar-based chroots.
(Closes: #769289)
[ Aurelien Jarno ]
* lib/Sbuild/Build.pm: only list content for deb/udeb files. (Closes:
#781075)
-- Aurelien Jarno <aurel32@debian.org> Tue, 24 Mar 2015 14:37:46 +0100
sbuild (0.65.1-1) unstable; urgency=medium
* Team upload.
[ Roger Leigh ]
* Sbuild::Build: Build arch-all packages when other architectures
are present in the arch list (Closes: #771235). Thanks to
Lennart Sorensen for this patch.
[ Ansgar Burchardt ]
* Handle :native architecture qualifier in build dependencies.
Thanks to Johannes Schauer for the patch. (Closes: #777204)
* Merge most changes from Debian's buildd-0.64 branch.
-- Ansgar Burchardt <ansgar@debian.org> Tue, 24 Feb 2015 22:53:16 +0100
sbuild (0.65.0-1) unstable; urgency=medium
[ Benjamin Drung ]
* Team upload.
* Fix various issues found by Lintian:
- Fix spelling mistake: indended -> intended
- Fix hyphen-used-as-minus-sign
- Fix debian-news-entry-uses-asterisk
- Fix copyright-refers-to-symlink-license
- Use canonical VCS fields
* Export additional variables to external commands: %SBUILD_CHROOT_DIR,
%SBUILD_BUILD_DIR, %SBUILD_PKGBUILD_DIR, and %SBUILD_HOST_ARCH
(Closes: #756265)
* Bump Standard-Version to 3.9.6
* Unset typical desktop variables XDG_RUNTIME_DIR, XDG_SEAT,
XDG_SESSION_COOKIE, XDG_SESSION_ID, and XDG_VTNR (Closes: #729012)
* Fail if dpkg subcommands fail instead of silently ignoring failures.
Thanks to Christoph Biedl for the patch (Closes: #745221)
* Fix build failure if the package version ends with Debian revision 0.
Thanks to Adam Borowski <kilobyte@angband.pl> (Closes: #679574)
* Fix broken man page symlinks in buildd package
[ Geoffrey Thomas ]
* Refactor temporary build-dep repository code to use apt-get update,
instead of hacking /var/lib/apt/lists.
* Add --extra-package (Closes: #700522) and --extra-repository (Closes:
#714883).
* Accept 0 as a source version number (Closes: #712627)
* Add DEP-8 autopkgtest to build procenv. (Closes: #705926)
[ Johannes Schauer ]
* sbuild:
- Add build-profiles support (Closes: 731798)
[ Geoffrey Thomas ]
* Sbuild::ChrootSetup: Pass --no-options to gpg (Closes: #722103)
-- Wookey <wookey@debian.org> Fri, 17 Oct 2014 17:20:45 +0100
sbuild (0.64.3-2) unstable; urgency=medium
* Ensure foreign-arch logging is correct (Closes: #763635)
-- Wookey <wookey@debian.org> Wed, 01 Oct 2014 17:32:42 +0100
sbuild (0.64.3-1) unstable; urgency=medium
* Team upload
[ Wookey ]
* sbuild:
- Add support for multiarch builds (enable foreign arch 'arch'
if Build-Depends includes specific foo:arch dependency)
- Enable chroot setup commands to be run as root
(Closes: #608840,#607228)
- Document command hooks
- Add Wookey to sbuild team/uploaders
[ Johannes Schauer ]
* sbuild:
- Add starting-/finished- build-commands hooks (Closes: #760991)
-- Wookey <wookey@debian.org> Sat, 20 Sep 2014 00:38:58 +0100
sbuild (0.64.2-1) unstable; urgency=low
* Team upload.
[ Colin Watson ]
* buildd:
- Unset some more locale environment variables, and sort these in the
same order as the output of locale(1), to make it easier to compare
visually.
[ Luca Falavigna ]
* sbuild-createchroot:
- Allow to define custom suffixes in chroot names (Closes: #741727).
- Allow to Define custom debootstrap variant (Closes: #715020).
[ Christoph Biedl ]
* lib/Sbuild/Build.pm:
- Sort output of package content listing (Closes: #743773).
-- Luca Falavigna <dktrkranz@debian.org> Fri, 12 Sep 2014 20:02:46 +0200
sbuild (0.64.1-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* sbuild:
- sbuild-createchroot now works with perl 5.18 (Closes: #724858).
Thanks to Alexander Chernyakhovsky for this patch, which corrects
the use of File::Temp. Thanks also to Paul Elliott and Václav
Ovsík who also provided an equivalent patches.
- Sbuild::Conf: Add missing File::Spec (Closes: #722012). Thanks to
Václav Ovsík for this patch.
- Sbuild::Build: Remove perl 5.10 autoflush workaround; flushing works
correctly wih perl 5.18.
-- Roger Leigh <rleigh@debian.org> Sun, 13 Oct 2013 19:35:57 +0100
sbuild (0.64.0-1) unstable; urgency=low
[ Thorsten Glaser ]
* Apply patch from Arnaud Patard to fix the uploader (Closes: #636477).
* Make sample configuration entries actually work (Closes: #696840).
* Avoid using undef as HASH reference (Closes: #696841).
[ Philipp Kern ]
* Forward port patches from the buildd-0.61.0 branch:
- Buildd::Client: Don't change the cwd.
- Buildd: Fix SSH control master restart.
[ Roger Leigh ]
* New release.
* Upgrade to Standards-Version 3.9.4 (no changes).
* buildd:
- Remove duplicate stop action from init script (Closes: #695513).
- Failure count before sleeping is configurable with
MAX_SBUILD_FAILS (Closes: #693790).
- buildd.init specifies correct Required-Stop dependencies.
- Remove empty preinst script.
* sbuild:
- Cross build-dependency installation failure throws an
exception (Closes: #693788).
- In Sbuild::ResolverBase, pass the correct options to deps_parse
for cross-building and foo:native build dependencies
(Closes: #697298). Thanks to Colin Watson for this patch.
- In Sbuild::Build::copy_to_chroot, remove stray exit() which could
cause sbuild to hang with a "Failed to copy" error
(Closes: #699903). Thanks to Stephan Sürken for this patch.
- Compute changes path correctly, to allow “--debbuildopt=-A” to
work correctly with _all.changes (Closes: #686509). Thanks to
Daniel Dehennin for the original version of this patch.
- Run lintian from inside the chroot (Closes: #626361). Thanks to
Reinhard Tartler for this patch.
[ Colin Watson ]
* sbuild:
- Resolve cross-build-dependencies from package being built rather than
from current apt sources (Closes: #695203).
* buildd:
- Reset sbuild failure count after sleeping.
[ Adam Conrad ]
* sbuild:
- Improve cross chroot detection to look for $dist-$build-$host as a
valid chroot for cross-build to avoid namespace clashes with native
chroots, and document this better in the manpage (Closes: #695273)
[ Geoffrey Thomas ]
* sbuild:
- When creating a changelog entry for binNMUs or
--append-to-version, tag it with "binary-only=yes" so that
dpkg-gencontrol uses the previous changelog entry for the source
version (Closes: #672711, #681292).
-- Roger Leigh <rleigh@debian.org> Fri, 17 May 2013 23:06:13 +0100
sbuild (0.63.2-1.1) unstable; urgency=low
* Non-maintainer upload.
* Fix building packages with revision "0" (Closes: #687396)
-- Roland Stigge <stigge@antcom.de> Wed, 05 Dec 2012 14:44:45 +0100
sbuild (0.63.2-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* Sbuild::Conf: Fix typo sucess (Closes: #663089).
* Sbuild::Options:
- Add --no-run-lintian and --no-run-piuparts options
(Closes: #665372). If lintian or piuparts are configured to run
automatically following a successful build, there options disable
this behaviour for the build.
- Add --purge-build option (Closes: #629109). This behaves
identically to the old --purge option. --purge now purges
everything (build directory, build dependencies and schroot
session) and is equivalent to using --purge-build, --purge-deps
and --purge-session together. Thanks to Jan-Marek Glogowski for
this patch.
* Sbuild::Conf:
- Don't create the log directory unless logging is enabled or
using buildd mode (Closes: #673009).
* Sbuild::Build:
- Don't pass $key_id to the shell unescaped (Closes: #676475).
- Use _all.changes rather than _arch.changes if -A is passed to
dpkg-buildpackage (Closes: #674669). Thanks to Daniel Dehennin
for this patch.
* Sbuild::Utility: Fix logging in download function (Closes: #637931).
* sbuild:
- If running sbuild from inside a build tree (like
dpkg-buildpackage), place the build logs outside the tree
(Closes: #676834). Logs will be created in '..' rather than '.'.
- When packing source trees with "dpkg-source -b", always pass
"." as the directory to pack, so the orig.tar can be found
(Closes: #662785).
* sbuild-createchroot:
- Use profile=sbuild in place of script-config= in generated
schroot.conf configuration (Closes: #665215, #675861).
- Don't pass --keyring to dpkg-buildpackage unless explicitly set
by the user (Closes: #673676).
-- Roger Leigh <rleigh@debian.org> Sat, 18 Aug 2012 13:46:45 +0100
sbuild (0.63.1-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* Don't require xapt. Remove duplicate and incorrect check. Thanks
to Andres Mejia and Jakub Wilk (Closes: #675332, #675354).
* Remove /etc/schroot/setup.d/99builddsourceslist which was
provided with earlier versions of sbuild, but no longer works with
current schroot versions (Closes: #675349).
-- Roger Leigh <rleigh@debian.org> Thu, 31 May 2012 21:59:16 +0100
sbuild (0.63.0-1) unstable; urgency=low
[ Wookey ]
* Support for cross-compiling has been added. This includes the
addition of $host and $build configuration variables, with
corresponding --host and --build command-line options. This
includes the addition of a new 'xapt' dependency resolver.
- Merge cross-build support (thanks to Hector Oron,
Closes: #610689).
- Add multiarch cross-build support.
[ Roger Leigh ]
* The deprecated 'internal' dependency resolver has been removed,
along with the configuration variables $apt_policy,
$check_depends_algorithm and $resolve_virtual, and the
command-line option --check-depends-algorithm. The 'apt'
resolver is the default replacement for 'internal'.
(Closes: #622788)
* Support for watches has been removed. The configuration
variables $check_watches, $ignore_watches_no_build_deps and
$watches (and obsolete variables @ignore_watches_no_build_deps
and %watches) have also been removed.
* sbuild-stats and support for build time and space statistics
recording has been removed. These statistics are recorded in
both the build log and are available as build metadata
internally. The statistics recorded in the database were not
particularly informative; storing the statistics in a proper
relational database is recommended. The configuration variables
$avg_time_db and $avg_space_db have been removed.
* Drop 25nssdatabases schroot setup script used on compatibility
mode (on buildds). This has been replaced by the schroot
20nssdatabases for many years.
-- Roger Leigh <rleigh@debian.org> Wed, 30 May 2012 22:49:18 +0100
sbuild (0.62.6-1) unstable; urgency=low
* New release.
* All changes backported from buildd-0.61.0 branch.
* sbuild.1: Add --chroot to synopsis (Closes: #635203).
* sbuild:
- --jobs is an alias for -j, to match documented behaviour
(Closes: #635250).
- The use of alternatives in Build-Depends and Build-Depends-Indep
may be turned on or off by the configuration variable
$resolve_alternatives. It may also be enabled or disabled at
build time using the --resolve-alternatives and
--no-resolve-alternatives options, respectively.
- Correctly support chroot namespaces, to work with schroot 1.5.x
(Closes: #612630).
- Support Build-Depends-Arch and Build-Conflicts-Arch fields in
debian/control. These may be manually set with
--add-depends-arch and --add-conflicts-arch, respectively.
-- Roger Leigh <rleigh@debian.org> Wed, 07 Dec 2011 20:41:43 +0000
sbuild (0.62.5-1) unstable; urgency=low
* New release.
* sbuild:
- Correct use of Dpkg::Version for version parsing, to ensure
correct behaviour when using native package versions and epochs.
- Don't require an exact version when building a package directly
from a source tree.
-- Roger Leigh <rleigh@debian.org> Wed, 13 Jul 2011 19:56:05 +0100
sbuild (0.62.4-1) unstable; urgency=low
* New release.
* sbuild:
- Failing lintian checks are highlighted in red, and passes in
green (Closes: #631060).
- The distribution in the build summary is coloured yellow if it
does not match the distribution in the changelog. This is to
indicate that there may be a potential problem, such as
potentially uploading a package intended for experimental to
unstable by building for unstable by accident.
- lintian test results are also coloured to highlight success and
failure.
- Log colouring may now be disabled using $log_colour.
- sbuild only permits building one source package at once.
Previously sbuild would allow building of more than one package
in a single invocation. Making this change means that the exit
status will always be the status of the build rather than the
last build, and it also means the logging is simplified and may
be started earlier.
- Now that the main log has been removed, and packing of a source
tree takes place before starting the build for real, we no longer
create a log file in the build tree, confusing "dpkg-source -b"
(Closes: #612324).
- Added new directory /var/lib/sbuild/build to hold build trees for
sbuild when building. This will be bind mounted on /build inside
the chroot following an update to the schroot sbuild and buildd
fstab configuration for schroot. This saves significant amounts
of space when using LVM snapshot chroots, and it also makes it
easier to preserve build trees for failing builds when using
snapshots.
- Extra environment variables to be set when running
dpkg-buildpackage may now be set using $build_environment
(Closes: #631595). These variables will supplement the existing
environment (e.g. PATH, LD_LIBRARY_PATH), and will not be subject
to filtering with $environment_filter.
- Existing hard-coded .dsc/.changes/dpkg-parsechangelog parsing has
been replaced with use of Dpkg::Control. Existing reimplmentation
of the dpkg version comparison and regexes to split versions into
epoch/version/revision have been replaced with use of
Dpkg::Version.
* sbuild-adduser: Use current sbuild-update options in example
(Closes: #630791).
-- Roger Leigh <rleigh@debian.org> Sat, 25 Jun 2011 11:39:44 +0100
sbuild (0.62.3-1) unstable; urgency=low
* New release.
* sbuild:
- The apt and internal resolvers will resolve some alternatives
even when resolving alternative dependencies is disabled
(Closes: #622832). For relations involving the same package,
the alternative will be permitted when the package names are
the same for each alternative. For example,
foo (<< x) | foo (>= y) | bar
will be reduced to
foo (<< x) | foo (>= y)
while
foo | bar
will be reduced to
foo
- The sbuild-schroot wrapper program has been removed; sbuild is
now an arch-all package again.
- Move lock directory to /var/lib/sbuild/chroot-lock, rather than
using /var/lock/sbuild which could be a symlink to /run/lock on
the host (Closes: #626826). This means parallel builds won't
block due to sharing the same lockfile.
- Remove schroot buildd profile. This will now be provided by
the schroot package itself directly. This requires schroot
1.4.22 or greater.
- Add lintian and piuparts results to build summary
(Closes: #617450).
- Remove directory correctly in postrm (Closes: #627641). Thanks
to Daniel Baumann.
- Lock sbuild account on purge, and unlock on install
(Closes: #619892).
- Add -j option to run parallel builds (Closes: #626357).
- Log build environment prior to starting a build. This will be
useful in diagnosing problems with a misconfigured chroot, such
as missing HOME which can lead to misbuilds.
* sbuild-createchroot:
- Don't call ChrootSetup::basesetup after initial bootstrap; wait
until actually running sbuild. The users and groups used for
chown don't exist at this point, leading to (harmless) failure.
Closes: #622735.
- Don't overwrite existing symlinks under /etc/sbuild/chroot
(Closes: #608416).
* sbuild-update:
- Don't try to end the current chroot session if a signal is
received and no session is in progress (Closes: #629005).
* buildd:
- init script starts buildd in runlevels 2-5 rather than S, and
stops in 0, 1 and 6.
- Lock buildd account on purge, and unlock on install.
* buildd-mail:
- Remove empty newline from .changes (Closes: #627854).
ftp-master started refusing .changes files which have a trailing
empty line (after the GPG end of signature). It happens that
mutt introduces one when signing GPG in traditional mode. Other
tools probably do too. buildd-mail-wrapper should probably drop
it automatically. Thanks to Samuel Thibault.
-- Roger Leigh <rleigh@debian.org> Sat, 04 Jun 2011 00:01:13 +0100
sbuild (0.62.2-1) unstable; urgency=low
* New release.
* sbuild:
- New options --no-apt-clean, --no-apt-update, --no-apt-upgrade and
--no-apt-distupgrade have been added to allow these actions to be
disabled even when set as the default in the configuration.
- root is not required to be a member of the sbuild group in order
to run schroot via the sbuild-schroot wrapper
(Closes: #619128, #619002).
- Don't require HOME to be set in the environment (Closes: #619288).
- Work around broken build-essential on Ubuntu Lucid
(Closes: #619526). Thanks to Marc Deslauriers.
- --keep-session is replaced by
--purge-session=(always|successful|never). This will allow the
session to be purged for all, successful and no builds,
respectively (Closes: #619332).
- sources.list fragments stored in /etc/apt/sources.list.d have
0644 permissions, so that normal users can run apt-cache in the
chroot during a build (Closes: #620797). Thanks to Julian Andres
Klode for identifying this problem.
- Log filtering may be disabled using $log_filter = 0 in the
configuration (Closes: #620589). The replacement text is now
also surrounded with "«" and "»" so that strings such as CHROOT
and BUILDDIR can't be confused with any actual appearance of the
same string in the build log.
- Log colouring may be disabled using $log_colour = 0 in the
configuration.
- Improve binNMU handling to permit binNMUs for multiarch packages
(Closes: #620112). Currently, binary NMUs use the current date
in the new changelog entry, but co-installable packages require
an identical changelog. To avoid this, take the date from the
previous changelog entry to ensure the same date for all binNMUs.
Thanks to Anders Kaseorg for this patch.
- Abort early if maintainer is not defined when performing a binNMU
or appending a version suffix (Closes: #620758).
* sbuild.conf:
- Don't set a default value for $build_dir (Closes: #619416).
This value is set each run, and so varies between builds when
generating the configuration file. Exclude from the generated
output to prevent unnecessary differences between builds.
- $purge_session uses the same purge modes as $purge_build_deps and
$purge_build_directory, rather than a boolean value.
* buildd:
- Merge latest changes from buildd-0.61.0.
-- Roger Leigh <rleigh@debian.org> Tue, 05 Apr 2011 10:46:49 +0100
sbuild (0.62.1-1) unstable; urgency=high
* New release.
* Fixed security issue in the sbuild-schroot wrapper program which
did not enforce sbuild group membership in order to allow users
to access the chroots as user sbuild.
-- Roger Leigh <rleigh@debian.org> Sun, 20 Mar 2011 23:06:52 +0000
sbuild (0.62.0-1) unstable; urgency=low
* New release.
* debian/control:
- Build-Depend upon libexception-class-perl.
* sbuild:
- Resolvers:
+ 'apt' is now the default build dependency resolver. Users should
not see any significant changes compared with the old 'internal'
resolver. Please note that you may need to generate a GPG key
for the local archive created for dependency package
installation, if one does not already exist; see sbuild-update
(--keygen) for further details.
+ The 'internal' build dependency resolver is deprecated. It is
not recommended for future use, and will be removed once it is no
longer used by the buildd infrastructure. Please use the 'apt'
resolver as a drop-in replacement.
+ The 'aptitude' build dependency resolver will, unlike 'apt' and
'internal', consider alternative dependencies by default, rather
than only using the first alternative. This is intended to both
preserve backward compatibility, and make the 'aptitude'
resolver the preferred choice for more complex situations, such
as building for experimental.
+ The aptitude resolver can resolve complex dependencies, e.g.
A | B, where A is uninstallable now correctly falls back to B.
This is not the case for the internal or apt resolvers, which by
intent do not make use of alternatives (they use the first
alternative only. sbuild now has full support for resolving
alternatives, but this is not the default behaviour
(Closes: #403246). Please see #614807 for a proposed description
of autobuilder-imposed build dependency restrictions in Policy.
+ All build dependency resolvers run dpkg with --force-confold.
This means packages with modified conffiles in the chroot to not
cause build failure. This includes /etc/services and
/etc/protocols from netbase (Closes: #576508).
- Logging:
+ Long paths such as the chroot location and the build directory
inside the chroot are now filtered in the build log and replaced
with small, constant, abbreviations (Closes: #605763). This makes
the build logs comparable between builds with tools such as
diff(1).
+ Logging messages have been improved, and important messages are
now coloured when running interactively (does not affect log
files). Errors, warnings and informational messages are coloured
red, yellow and green, respectively. Build status is coloured
green for success and red for all failure conditions.
+ Build log mails are now compressed and mailed in MIME format by
default, together with a copy of the .changes file. The old
behaviour (plain mailing of uncompressed logs) may be restored by
setting $mime_build_log_mails=0 in the configuration, and
compression may also be disabled in the MIME mails by setting
$compress_build_log_mails=0. Note that it is no longer possible
to send compressed log mails unless MIME mailing is enabled.
Thanks to Philipp Kern for implementing this.
- Error handling:
+ In order to handle errors more robustly, the build code now has
initial support for exception handling. Normal operation will
not be affected, but fatal errors may be logged in a different
order than seen previously. Fatal errors will now be seen at the
end of the build log, which should make it easier to spot
problems.
+ sbuild now always cleans up fully when receiving a termination
signal such as SIGINT or SIGTERM. Note that you may need to wait
while the cleanup actions are performed, or the current task is
completed prior to initiating cleanup. When running
interactively, hitting Ctrl-C will sent SIGINT to the entire
process group; doing this while apt-get or aptitude are running
will potentially leave dpkg in an inconsistent state, so aborting
at this point is not recommended. Sending a SIGTERM to the
sbuild process will always work cleanly.
- General:
+ sbuild now performs an apt dist-upgrade at the start of each
build by default, rather than an upgrade. This is to reduce the
amount of manual administration required to keep chroots up to
date, and is not much more risky than upgrade in this context.
+ A new option, --keep-session, has been added (Closes: #609658).
This prevents the automatic removal of session-managed snapshot
chroots. Previously, snapshots would not be deleted if purging
of the build directory or build dependencies was disabled, but
this was not always desirable, hence it is now configurable
separately.
+ Internally, building and other actions in the chroot are
performed by the 'sbuild' system user, where previously the user
invoking sbuild would be used instead. The aim of this change is
to separate privileges to increase security and reduce the chance
of accidental or deliberate tampering of the build environment.
While the latter is not addressed by these changes, this will be
taken care of during future architectural changes.
+ The sbuild package build directory created inside the chroot now
has a reduced name length. It's now /build/packagename-XXXXXX
where XXXXXX are random characters. This helps reduce the chance
of hitting path length restrictions on some architectures,
particularly when using sockets.
* wanna-build:
- The wanna-build database has been removed entirely. This part of
the sbuild package was not used, and was not maintained for some
time. Users wishing to use wanna-build should investigate the
version in the wanna-build.git repository used by the Debian
autobuilding infrastructure. This version is actively maintained
and in continual use.
* sbuild.conf:
- sbuild.conf is now automatically generated from the help text and
defaults in the source code. This means that the examples will
always be syntactically correct, the help text will always be
current, and the defaults will always match the defaults in the
source code (Closes: #609932, #610995).
- Non-scalar (or reference) types are deprecated in sbuild.conf.
This is because it is not possible to tell the difference between
an empty and an undefined value. Values using array or hash
types should use the equivalent array reference or hash
reference, which have been supported for some time. The old
style array and hash values will remain supported for now, but
will be removed in a future release.
* buildd.conf:
- Automatically generated like sbuild.conf. As for sbuild.conf,
non-scalar types are deprecated.
* sbuild.conf.5:
- All of the allowed values in sbuild.conf are now documented in a
new sbuild.conf(5) manual page. Like sbuild.conf, this is
entirely generated from the source code, so will always match the
defaults for the same sbuild version.
* buildd.conf.5:
- New manual page. Like sbuild.conf(5), this documents all allowed
values.
-- Roger Leigh <rleigh@debian.org> Wed, 16 Mar 2011 16:10:31 +0000
sbuild (0.61.0-1) unstable; urgency=low
* sbuild:
- The apt and aptitude build dependency resolvers now use only the
first alternative in alternative dependencies. The other
alternatives are stripped out entirely. This makes the apt and
aptitude resolvers behave exactly like the internal resolver.
Note that this is configurable with the $resolve_alternatives
option, so alternative resolving may be re-enabled with this
option if desired. This is useful for e.g. backports, but not
for unstable where the strict consistency and reproducibility
offered by only using the first alternative is required.
- The aptitude resolver now runs dpkg with --force-confold, to
match the behaviour of internal and apt. This prevents failure
when installing netbase into the build chroot, for example.
-- Roger Leigh <rleigh@debian.org> Wed, 23 Feb 2011 13:08:58 +0000
sbuild (0.60.9-1) unstable; urgency=low
* New release.
* sbuild:
- Don't automatically generate local archive signing key if
missing (Closes: #607945). If missing, abort build with an error
message and instructions for how to generate the key.
- Do not filter out environment variables starting with DEBIAN_ by
default (Closes: #608659). Thanks to Modestas Vainius.
- Do not filter out PATH environment variable (Closes: #610997).
Note this is not the user's PATH, but the $path in sbuild.conf.
- Aptitude resolver defines a custom SolutionCost in order to
improve resolver behaviour (Closes: #608789). Thanks to
Modestas Vainius.
- When running apt-get, use "-o APT::Install-Recommends=false"
rather than "--no-install-recommends" in order to support older
releases (Closes: #609811). Thanks to Marc Deslauriers.
- Purging the package removes generated files in /etc/sbuild/chroot
and /var/lib/sbuild (Closes: #608412).
- The architecture specified with --arch (defaulting to the host
system architecture) must match the chroot architecture
(Closes: #609151). This was previously allowed to be superceded
by the chroot architecture. This change is to avoid any abiguity
regarding the host/build architecture for the package being built.
- Add --no-arch-all option to force not building arch-all packages
(Closes: #613401). Thanks to Sebastian Harl for this patch.
* sbuild-createchroot:
- Use less restrictive permissions on chroot directory and schroot
configuration file (Closes: #608414). The chroot now has 0755
permissions, and the schroot configuration 0644.
- Don't require sudo access (Closes: #608429). The
Sbuild::ChrootPlain module used to run commands inside the newly-
created chroot was using sudo to run commands when already
running as root. sudo is no longer used when root.
- Remove use statement which prevented command-line options being
registered (Closes: #610007, #607606). Command-line options now
work correctly.
* sbuild.conf:
- $environment filter is syntactically correct (Closes: #610997).
Thanks to Jakub Wilk.
- $apt_allow_unauthenticated is documented to use apt-secure(8)
(Closes: #608971).
* sbuild.1:
- Document the temporary local archive used by the apt and aptitude
build dependency resolvers to store and install dummy dependency
packages (Closes: #608972).
-- Roger Leigh <rleigh@debian.org> Mon, 14 Feb 2011 20:37:05 +0000
sbuild (0.60.8-1) unstable; urgency=low
* New release.
* sbuild:
- Don't use user's default GPG configuration and keyrings for
signing archives; use sbuild archive signing keys only
(Closes: #606668). Thanks to Simon McVittie for this patch.
- Use an empty directory as GPG homedir.
- Don't run "apt-get update" to update local archive; copy files
directly into /var/lib/apt/lists. This means the remote mirror
lists can't be updated during a build, and it also saves the
time needed to update the lists an additional two times.
-- Roger Leigh <rleigh@debian.org> Sun, 12 Dec 2010 19:24:11 +0000
sbuild (0.60.7-1) unstable; urgency=low
* New release.
* Correct building of dependency package using the apt and aptitude
resolver, where /tmp is not shared with the host (Closes: #606278).
-- Roger Leigh <rleigh@debian.org> Wed, 08 Dec 2010 21:47:11 +0000
sbuild (0.60.6-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* sbuild:
- sbuild now sanitises its environment when running external
commands.
- sbuild no longer generates the files REDO and SBUILD-REDO-DUMPED.
- sbuild now has a testsuite.
- apt and aptitude build-dependency resolvers now use a local apt
archive, which improves the behaviour of the apt resolver (the
dependency package will no longer be removed in some situations).
- Workaround uninstallable sysvinit on Ubuntu, where sysvinit is
still present in the build-essential package list. Thanks to
Jamie Strandboge.
* sbuild-update:
- sbuild-update works on multiple chroots (Closes: #604715).
- sbuild-update works with multiple architectures (Closes: #606001).
Thanks to Ansgar Burchardt for this patch.
- sbuild-update now has a --keygen option to generate signing keys
for temporary apt archives.
* sbuild.1: Update description of --maintainer (Closes: #605745).
Thanks to Jakub Wilk.
* Sbuild::ConfBase: Only use MAILTO_HASH if defined (Closes: #589615).
Thanks to Marc Dequènes for this patch.
[ Modestas Vainius ]
* sbuild:
- Do not skip purging of build directory if chroot is cloned
(Closes: #605997). This is necessary if /build in chroots is
(bind-)mounted to the outside of the session. However, if /build
is part of the cloned session, $purge_build_directory='never'
could be used in order to avoid wasting time when the session
ends.
-- Roger Leigh <rleigh@debian.org> Tue, 07 Dec 2010 21:08:28 +0000
sbuild (0.60.5-1) unstable; urgency=low
* Chroot upgrade and dist-upgrade commands run with
"dpkg --force-confold" as done for build dependency installation
(Closes: #603397). Thanks to Loïc Minier.
-- Roger Leigh <rleigh@debian.org> Sat, 13 Nov 2010 18:43:25 +0000
sbuild (0.60.4-1) unstable; urgency=low
* New release.
* Allow the user to specify chroot namespaces in the distribution
name (Closes: #602789).
* Revert default build dependency resolver to 'internal' for the
time being.
-- Roger Leigh <rleigh@debian.org> Tue, 09 Nov 2010 19:46:38 +0000
sbuild (0.60.3-1) unstable; urgency=low
* New release.
* sbuild-createchroot:
- Allow direct creation of tarballs from chroots, with various
options for compression (Closes: #545215). Thanks to Andres
Mejia.
* sbuild-update:
- sbuild-clean functionality has been merged into sbuild-update.
Thanks to Andres Mejia.
* sbuild:
- Dependency resolving:
. 'aptitude' is now the default dependency resolver. Users
wishing to use the old resolver should set
$build_dep_resolver='internal' in their configuration.
. The aptitude resolver can resolve complex dependencies.
A | B, where A is uninstallable now correctly falls back to B
(Closes: #403246).
. Removal of Build-Conflicts now works, due to using apt-get
or aptitude to perform the removal (Closes: #464376).
. Default to not enabling virtual dependency resolving with the
internal resolver ($resolve_virtual=0). This is to avoid
changing the historical behaviour by default.
- Don't set Sbuild::debug_level to undef (Closes: #602318).
Thanks to Andres Mejia.
- Add debuild-like feature to run sbuild on an unpacked source
tree (Closes: #551311). In addition to specifying a package
version to build, or a source package .dsc, a directory may be
used. This will be packaged with 'dpkg-source -b' prior to
building. Thanks to Andres Mejia.
- Add support for running lintian after a build. Thanks to Andres
Mejia.
- Add support for running external commands before and after a
build, and during chroot setup and cleanup. These may be used
to run piuparts, for example. Thanks to Andres Mejia.
* Run sbuild-* chroot maintenance commands in the 'source' chroot
namespace for chroots providing such a facility (Closes: #567505).
This means that update/distupgrade etc. operations will occur in
the source volume for lvm-snapshot and btrfs-snapshot chroot types.
Note that the sbuild chroot lock (/var/lock/sbuild) may be copied
into cloned chroots if a build is started during a maintenance
operation and the build will block until the operation is completed.
-- Roger Leigh <rleigh@debian.org> Mon, 08 Nov 2010 17:07:40 +0000
sbuild (0.60.2-1) unstable; urgency=low
* New release.
* sbuild:
- Dependency resolving:
. The aptitude build dependency resolver now sets
Aptitude::CmdLine::Ignore-Trust-Violations based upon the
$apt_allow_unauthenticated option (Closes: #588035). Thanks to
Ansgar Burchardt for this patch.
. Improve handling of alternative build dependencies and Provides
using the interal build dependency resolver. (Closes: #586275,
#578810, #591187, #591188, #591189, #595863, #595866, #595872).
Thanks to Ansgar Burchardt for this patch.
. Remove virtual build-dependency resolving using the "internal"
resolver using the static ALTERATIVES (%alternatives) list. This
was already limited, non-functional, and is obsoleted by the
"aptitude" resolver.
. Added the ability to resolve virtual dependencies using the
"internal" build dependency resolver by calling "apt-cache
--names-only" to get candidate packages to satisfy the
dependency. The first package (sorted alphabetically) is
chosen (Closes: #595934). This may be disabled using the
$resolve_virtual option.
. Use apt-get to remove build conflicts using the internal
resolver and correctly reinstall post build.
- Log the package source version as well as binary version in the
package build log, since these may differ when making binNMUs
(Closes: #569823).
- Always attempt to install ESSENTIAL (build-essential) packages
if they aren't already installed (Closes: #380113).
- Don't end session on build failure (Closes: #567506). This allows
examination of build trees and cloned chroots on build failure,
rather than unconditionally deleting them, which prevents this.
Thanks to Jan-Marek Glogowski.
- Remove support for parsing output of apt-get stderr
(Closes: #571806).
- Check for sbuild group membership using gid and supplementary
groups (Closes: #599350).
* buildd:
- Read entire contents of pipes (Closes: #567821). Thanks to
Samuel Thibault. This ensures receipt of complete log
messages.
- Replace/Breaks with ubuntu-dev-tools <= 0.83 (Closes: #590153).
Thanks to Lorenzo De Liso.
* buildd-vlog: Fix breakage (Closes: #567822). Thanks to
Samuel Thibault. This fix introduces sleeps, and is not a
complete or entirely optimal fix, but corrects the existing
breakage.
* Documentation:
- Remove trailing 'q' from sbuild-createchroot(8) manual page
(Closes: #579971). Thanks to Salvatore Bonaccorso.
- sbuild(1):
. Remove and rewrite obsolete parts of the manpage
(Closes: #599348).
. .sbuildrc is no longer required for sbuild to function
(Closes: #598054).
-- Roger Leigh <rleigh@debian.org> Tue, 02 Nov 2010 13:02:50 +0000
sbuild (0.60.1-1) unstable; urgency=low
* New release.
* debian/control:
- Upgrade to Standards-Version 3.9.1.
* sbuild:
- Add --no-source option (Closes: #571726). Thanks to David
Bremner for this suggestion.
- Hint aptitude to produce better solutions in AptitudeBuildDepSatisfier.
Thanks to Modestas Vainius. (Closes: #570463)
- AptitudeBuildDepSatisfier: Handle the case when default negative dep is
not available gracefully. Thanks to Modestas Vainius.
(Closes: #571565).
- Improve support for aptitude.
- Set DEBIAN_FRONTEND=noninteractive when using aptitude
(Closes: #588818).
- Improve dpkg-source v3 source format handling. Don't hard-code
assumptions about how the source files are named
(Closes: #559533).
- Remove conflict with schroot from oldstable.
* buildd:
- Retry the current suite if --take fails. (Closes: #570463)
* buildd-uploader:
- Don't remove the uploader lock if not already the owner
Closes: #591620). Thanks to Sebastian Andrzej Siewior.
* libsbuild-perl:
- depend on schroot 1.4.0 or greater due to sbuild-createchroot
creating schroot.conf fragments with 1.4.x-specific features.
-- Roger Leigh <rleigh@debian.org> Sun, 24 Oct 2010 19:56:34 +0100
sbuild (0.60.0-1) unstable; urgency=low
* debian/control:
- Upgrade to Standards-Version 3.8.4.
- Use ${misc:Depends} as required by debhelper.
* sbuild:
- Only run "schroot --info" once on startup, to speed up the startup
time when many chroots exist (Closes: #546624). Thanks to
Nelson Elhage for finding this issue and suggesting a suitable
approach for fixing it.
- Don't append binNMU or extra version to version number for use
in the DSC filename (Closes: #546647). Thanks to Nelson Elhage
for finding this issue.
- Distinguish between failed/attempted builds (Closes: #538083).
- Build directory cleaned under all failure conditions
(Closes: #538085).
- Flush stdout explicitly in logger to avoid "choppy" output when
monitoring interactively. Autoflushing stdout appears to be
broken in Perl 5.10 so flush explicitly in addition to
enabling autoflush. Thanks to Ryan Niebur for spotting this.
- Print a list of all installed packages and versions, in addition
to toolchain packages (Closes: #553301). Thanks to Felipe
Sateler for this suggestion.
- Don't default distribution to unstable (Closes: #559659).
Defaulting to unstable can result in unintentional uploads of
packages targetted at other distributions, such as experimental,
which can potentially cause serious breakage. As a result, it is
safer to require manually specifying the distribution, or
explicitly setting it in the configuration file.
- Set the man-db man-db/auto-update parameter to false to disable
unnecessary work in a build environment.
- Don't give back packages failing the arch check (Closes: #561936).
Thanks to Philipp Kern for reporting this.
- Add command-line and configuration options to enable running
apt-get clean, upgrade and dist-upgrade prior to building. These
complement the existing option to update the chroot, which is now
also fixed (Closes: #521096).
- Add $build_source variable to sbuild.conf to complement the
--source command-line options (Closes: #564528). Thanks to
David Bremner for this suggestion.
- Allow setting of $build_dir in sbuild.conf (Closes: #535911).
Thanks to Andres Mejia for this patch.
- Add $check_space option to allow free space checking to be
disabled (Closes: #551917). Thanks to Bruno Kleinert for this
suggestion.
- --apt-update both updates and upgrades the chroot
(Closes: #521096). Thanks to Gustavo Noronha Silva for this
patch. Note the original bug report 'get_apt_command' error
was fixed on the 17th March 2009.
- Allow the use of -C as well as --check-depends-algorithm as
documented (Closes: #546673). Thanks to Nelson Elhage for this
patch.
* Add sbuild-clean script (Closes: #551310). Thanks to Andres Mejia
for this patch.
* sbuild-createchroot: Compute an absolute path for the chroot
location. Thanks to Cyril Brulebois for this patch.
* wanna-build:
- Depend on postgresql-8.4-debversion in place of
postgresql-8.3-debversion (Closes: #559607). Thanks to Martin Pitt
for reporting this.
- wanna-build now reads its system configuration from the correct
location (/etc/buildd/wanna-build.conf, not
/etc/wanna-build/wanna-build.conf).
- Remove extra parenthesis from wanna-build-merge-packages
(Closes: #553364). Thanks to Felipe Sateler for this patch.
* Remove absent -t option for --top from sbuild-stats.1
(Closes: #566320). Thanks to Kurt Roeckx.
* buildd:
- Don't bind-mount /home into the schroot. (Closes: #566315)
- Extract architecture for .changes filename from the .changes file
instead of just using the system arch. (Closes: #566398)
- Fix NO_WARN_PATTERN default to not warn about sbuilds build/current-*
symlinks. (Closes: #566722)
- Do all w-b interaction, leave nothing of it to sbuild. (Closes: #567646,
#566321)
-- Roger Leigh <rleigh@debian.org> Tue, 23 Feb 2010 22:24:52 +0000
sbuild (0.59.0-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* Use version comparison functions in WannaBuild::Database
(Closes: #521486). Thanks to Florian Weimer.
* WannaBuild::Database: Allow whitespace in Architecture field
(Closes: #535415). Thanks to John Wright for this patch.
* Sbuild::Build, WannaBuild::Database: Add support for architecture
aliases/wildcards (Closes: #501230). Thanks to Andres Mejia for
these patches.
* Sbuild::Conf doesn't require STATS_DIR to exist, and
Sbuild::Build::write_stats only uses STATS_DIR in batch mode
(Closes: #539570).
-- Roger Leigh <rleigh@debian.org> Sun, 02 Aug 2009 11:15:26 +0100
sbuild (0.58.6-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* debian/control: Update package descriptions to use correct
English in full sentences (Closes: #531022). Thanks to
Gerfried Fuchs for pointing this out.
* Don't include Epoch in DSC filename (Closes: #529786). Thanks
to Gustavo Noronha Silva for spotting this.
-- Roger Leigh <rleigh@debian.org> Sat, 20 Jun 2009 10:48:45 +0100
sbuild (0.58.5-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* Install README.Debian in sbuild package (rename to
debian/sbuild.README.Debian, Closes: #533029).
* debian/sbuild.install: Don't install Perl modules, which should
only be included in libsbuild-perl (Closes: #533143).
* debian/control:
- libsbuild-perl: Replace sbuild <= 0.58.4 (due to also providing
perl modules)
- sbuild: Depend on the same version of libsbuild-perl.
-- Roger Leigh <rleigh@debian.org> Mon, 15 Jun 2009 20:30:34 +0100
sbuild (0.58.4-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* sbuild:
- A $purge_build_deps configuration option, and --purge-deps
command-line option have been added to control build-dependency
removal (Closes: #528312).
- Use the isin function from the Sbuild module (Closes: #529470).
Thanks to Gustavo Noronha Silva for spotting this.
* Sbuild:
- Use Filesys::Df (libfilesys-df-perl) in place of invoking /bin/df
and parsing its output. This is more robust and efficient, and
works whatever the user environment (Closes: #509133).
-- Roger Leigh <rleigh@debian.org> Tue, 19 May 2009 22:16:46 +0100
sbuild (0.58.3-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* debian/control:
- Update to Standards Version 3.8.1.
- Add buildd package.
- Add libsbuild-perl package.
- All packages depend upon libsbuild-perl.
* Add support for appending a tag to version numbers (Closes: #475777).
Thanks to Timothy G Abbott for this patch.
* When using the --help or --version options, don't abort if not
in the sbuild group (Closes: #523670). Group membership is now
only performed after options parsing, and only if required.
* Allow config files to use $HOME (Closes: #524564). Thanks to
James Vega for this patch.
* Restore buildd package.
* Split common library functions into new libsbuild-perl package.
* debian/sbuild.(preinst|postinst|postrm):
- Remove special cases for versions older than oldstable. Update
addition and removal of sbuild group to use return value of getent
rather than parsing getent output.
- Use addgroup/delgroup in place of adduser/deluser.
- Use --system when adding and deleting group, to ensure creation
of a system group. Migrate existing non-system group and group
members if the system group is not present.
- Handle removal of 50sbuild setup script.
* debian/buildd.(preinst|postinst|postrm): Add maintainer scripts for
buildd package. Move configuration file from /etc/buildd.conf to
/etc/buildd/buildd.conf if present. Also create buildd user and
group for running the buildd daemon.
* Sbuild::Conf: Don't default MAINTAINER_NAME to $DEBEMAIL if unset
in the configuration file (Closes: #520158).
* /etc/schroot/setup.d/50sbuild: Remove. The setup tasks performed by
this script are now handled internally by sbuild.
-- Roger Leigh <rleigh@debian.org> Sun, 17 May 2009 15:52:53 +0100
sbuild (0.58.2-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* etc/50sbuild: Don't create user home directory inside the build
chroot. Home directories are not required for building.
* lib/Sbuild/ChrootInfoSchroot.pm: Run schroot in a C locale, to
avoid localisation of the output which breaks parsing
(Closes: #520755). This was preventing the detection of chroots
in some locales.
* debian/buildd.cron.d: Move example crontab here, with entries
commented out for now.
* debian/rules: Use dh_installcrontab to install crontabs.
* Remove buildd package for this release, because it's not yet
ready for use.
-- Roger Leigh <rleigh@debian.org> Sat, 11 Apr 2009 10:20:25 +0100
sbuild (0.58.1-1) unstable; urgency=low
[ Roger Leigh ]
* debian/rules: Run configure setting DCMD, SUDO and SCHROOT.
(Closes: #519097). It's not possible to install sudo as a
build-dependency due to it not allowing automatic removal, and
none of the commands are actually needed for the build, just
setting the default path.
* sbuild: Don't erase default chroot environment (Closes: #519276).
This removed APT_CONFIG, preventing sbuild from working correctly.
Thanks to Francois-Denis Gonthier.
-- Roger Leigh <rleigh@debian.org> Wed, 11 Mar 2009 23:16:41 +0000
sbuild (0.58.0-1) unstable; urgency=low
[ Roger Leigh ]
* New release.
* debian/rules:
- Clean up old unused code.
- Correct patching of config.status and config.guess.
- Add functional binary-arch target.
- Use dh_prep in place of dh_clean -k.
- Don't configure with --with-postgresql (debversion code moved
to postgresql-debversion).
* debian/compat: Update to debhelper version 7.
* debian/control:
- Build-Depend on debhelper 7.
- wanna-build recommends postgresql-8.3-debversion.
* debian/NEWS: Document incompatible changes from previous versions.
* debian/sbuild.docs: New file. Add NEWS.
* debian/wanna-build.docs: New file. Add NEWS.
* buildd-mail-wrapper: Use more portable BSD getloadavg in place of
Linux-specific sysinfo. Thanks to Robert Millan for this
patch (Closes: #511095).
* wanna-build: --help output now documents --create-db, since --help
now displays the full manual page (Closes: #511314).
[ Kees Cook ]
* lib/Sbuild.pm: always perform version checks on provided packages
(Closes: #505747).
-- Roger Leigh <rleigh@debian.org> Sun, 08 Mar 2009 21:53:54 +0000
sbuild (0.57.5-1) unstable; urgency=low
* New release.
* Sbuild::Build::new: Check if 'DSC' exists rather than 'DSC File' to allow
the .dsc to be in any directory (Closes: #489794). Thanks to
Francois-Denis Gonthier for this patch.
* $Sbuild::Conf::apt_allow_unauthenticated: New configuration parameter
to disable APT package authentication, which is now enabled by default
(Closes: #492327). Thanks to Enrico Zini for this patch.
* Sbuild::Options: Use isin from Sbuild.pm (Closes: #492577).
* Sbuild::Log: Add version number and correctly-formatted date to the
package log name instead of a raw time_t (Closes: #493150).
Additionally add user and architecture to the name.
* Sbuild::Options: --make-binNMU no longer tries to assign an lvalue
(Closes: #493325). Thanks to Greg Hudson for this patch.
* $maintainer_name, $uploader_name and $key_id are now optional in
.sbuildrc; one is only required with performing binary NMUs for the
entry in debian/changelog (Closes: #489557).
* debian/sbuild.postrm: Correct use of local to remove bashisms.
-- Roger Leigh <rleigh@debian.org> Sat, 02 Aug 2008 21:23:13 +0100
sbuild (0.57.4-1) unstable; urgency=low
* New release.
* debian/control: Update to Standards Version 3.8.0.
* Use schroot "Session Purged" flag rather than "Session Cloned"
(Closes: #482804). Thanks to Timothy G Abbott.
* Handle version provides correctly, by using "~*=PROVIDED=*=" in place
of "=*=PROVIDED=*=" as the package version (Closes: #395271). Thanks
to Niko Tyni for this patch.
* Don't include epoch version in directory names (Closes: #482456).
Thanks to Raphael Hertzog.
* man/sbuild-setup.7.in: Replace references to buildd.chroot with
sbuild-createchroot, and adduser with sbuild-adduser (Closes: #483654).
Thanks to Marc Fargas.
* Package name, version, build directory and associated information are
now contained within Sbuild::Build objects. This allows stripping of
epoch to construct correct unpack directory location
(Closes: #482931, #482922).
* Warnings due to uninitialised variables are no longer reproducible
(Closes: #449251).
-- Roger Leigh <rleigh@debian.org> Sun, 06 Jul 2008 12:21:06 +0100
sbuild (0.57.3-1) unstable; urgency=low
* New release.
* --chroot and --arch now work together (Closes: #479714).
-- Roger Leigh <rleigh@debian.org> Sun, 11 May 2008 10:49:17 +0100
sbuild (0.57.2-1) unstable; urgency=low
* debian/copyright: Update copyright holders and copyright information.
* debian/rules: Run dh_link in binary-indep target to correct symlinks.
* debian/wanna-build.install: Install manual pages.
* man/sbuild.1.in:
- Add missing character, thanks to LI Daobing (Closes: #474487).
- Document --binNMU (Closes: #466927).
- --distribution should be --dist (Closes: #477693). Thanks to Martin
F Krafft.
* debian/README.Debian: Remove reference to README-buildd.chroot
(Closes: #474030), thanks to Marc Fargas. Update sbuild statistics
information.
* Add --apt-update option to sbuild to run "apt-get update" in the
chroot prior to fetching sources and building (Closes: #472350).
Thanks to Timothy G Abbott for this patch.
* Add --chroot option to specify a chroot separately from the
distribution name (Closes: #474160). Thanks to Simon McVittie for
this patch.
* debian/control: Depend on debhelper version 6 or greater (Closes:
#477655). Thanks to Martin F Krafft.
* lib/Sbuild/Conf.pm: Don't require $mailto to be set if not running in
a buildd environment (Closes: #478045). Thanks to Martin F Krafft.
* Use dcmd to parse dsc files, rather than hand-parsing. This allows
support of the new dpkg source format.
* All files used in a build are stored in
/build/username-package_version-arch-XXXXXX inside the chroot (Closes:
#478044).
-- Roger Leigh <rleigh@debian.org> Sun, 27 Apr 2008 21:22:19 +0100
sbuild (0.57.1-1) unstable; urgency=low
* New upstream release.
* debian/control:
- Depend upon schroot >= 1.1.6. This version includes a
SESSION_CLONE property, used to determine if a chroot is cloned,
and hence package removal may be skipped.
- Add wanna-build package.
* debian/rules: set libexecdir to /usr/share, for compatibility with
locations of scripts in earlier versions.
* debian/sbuild.install: use /usr/share in place of /usr/lib
(Closes: #458779).
* debian/wanna-build.install: New file: files for wanna-build.
* sbuild: Don't parse output of dpkg-source (Closes: #471747).
-- Roger Leigh <rleigh@debian.org> Thu, 27 Mar 2008 20:42:56 +0000
sbuild (0.57.0-1) unstable; urgency=low
* Sbuild/*.pm: Reindent to increase readability.
* Sbuild/Chroot.pm: set APT::Install-Recommends to false inside the
chroot (Closes: #449253).
* Sbuild/Conf.pm: Add and export $check_depends_algorithm.
[Jan-Marek Glogowski]
* sbuild:
- Reindent to increase readability.
- Add additional syntax checks. Thanks to Jan-Marek Glogowski.
- build: Use unicode line drawing characters instead of ASCII.
- filter_dependencies: Remove redundant conditional.
[Jan-Marek Glogowski]
- Add check for check-depends-algorithm option. [Jan-Marek Glogowski]
- filter_dependencies: Change dependency behaviour depending upon
check_depends_algorithm. [Jan-Marek Glogowski]
- Move to bin/.
* avg-pkg-build-time:
- Move to bin/.
* bin/*: Reindent to increase readability.
* chroot/*: Reindent to increase readability.
* bin/sbuild-createchroot:
- Moved from chroot/buildd.chroot.
- Also install fakeroot and build-essential.
* sbuild-createchroot.1.in: Add manual page.
* chroot/buildd.chroot:
- Add GPL boilerplate.
- Remove /etc/passwd creation (already done by debootstrap).
- Remove sbuild directory creation (already done by schroot).
- Use here doc to set up /etc/apt/sources.list.
- List sources.list.
* chroot/README: Rename from README.buildd-chroot. Remove
buildd.chroot section.
* example.sbuildrc: Add missing variable types. [Jan-Marek Glogowski]
* example.sbuildrc: Add missing variable types and add
$check_depends_algorithm. [Jan-Marek Glogowski]
* sbuild.1: Document --check-depends-algorithm [Jan-Marek Glogowski]
* Move manual pages to man/.
* debian/manpages: Move manual pages to man/.
* sbuild.conf: Move to etc/.
* example.sbuildrc: Move to etc/.
* debian/compat: Move to debhelper v6 compatibility level.
* debian/control: Update to Standards-Version 3.7.3.
* debian/copyright:
- Update git repository location.
- Update GPL boilerplate.
* debian/sbuild.dirs:
- Rename from debian/dirs.
- Remove all but -var/lib/sbuild/srcdep-lock.
* debian/manpages: Remove.
* debian/sbuild.postinst: Rename from debian/postinst.
* debian/sbuild.preinst: Rename from debian/preinst.
* debian/sbuild.postrm: Rename from debian/postrm.
* debian/sbuild.install:
- New file.
- Install files from usr/sbin and usr/share/man/man8.
* debian/rules:
- Install sbuild-createchroot, and add buildd.chroot compatibility
symlink.
- Move -stamp files to debian/.
- Remove GENFILES.
- Run configure, make, and make install in appropriate rules.
- Use dh_install.
- Remove all special-cased installation rules (now handled by automake).
* Note: All upstream changes are now in an upstream ChangeLog.
-- Roger Leigh <rleigh@debian.org> Tue, 01 Jan 2008 11:36:55 +0000
sbuild (0.56) unstable; urgency=low
* sbuild
- Fix --force-orig-source option which was renamed to
--force_orig_source while rewriting the options parsing logic to use
Getopt::Long (Closes: #428205). Thanks to Alec Berryman for
reporting this regression.
- Accept arguments for options requiring a string (Closes: #431216).
Thanks to Anders Kaseorg for the patch for this regression.
* debian/preinst: Use dpkg-query in place of /var/lib/dpkg/status.
-- Roger Leigh <rleigh@debian.org> Sat, 07 Jul 2007 20:36:35 +0100
sbuild (0.55) unstable; urgency=low
* sbuild:
- Parse options with Getopt::Long.
- Remove trailing whitespace.
- Initialise $main::sub_task with a value, in case the build gets
terminated prior to it being used.
- Change the position of begin_session, so that it matches the cleanup
order on shutdown.
- build:
+ Document the regex which strips the epoch from the version
number.
+ Remove the call to setsid when forking dpkg-buildpackage, because
this broke shell job control. Some packages might possibly hang
while building if they detect they have a controlling terminal, but
IMO this is a bug in the package.
+ When handling the timeout for dpkg-buildpackage, make the $SIG{'ALRM'}
handler local, so that it is restored to the default once the build
has finished.
+ When calling mv to move files, use -f to make sure it doesn't run
interactively.
- check_dependencies: If a toolchain package is missing, print a
"not installed" message, rather than a blank version.
- dsc_md5sums: Log failure to open the .dsc.
- fetch_source_files: Strip the epoch of the version number, so that
$dscbase matches the .dsc filename in the filesystem (Closes: #425715).
Thanks to Lucas Nussbaum.
- merge_pkg_build_deps: Replace references to "central" src deps with
build-essential deps.
- parse_manual_srcdeps: New function, to replace the addition of manual
source dependencies from the removed read_deps() function.
- shutdown: Call end_session to clean up the chroot.
* Sbuild/Chroot.pm:
- end_session:
+ Add a debugging message.
+ Clear $schroot_session.
* Sbuild/Conf.pm: Add linux-libc-dev, gnumach-dev, hurd-dev and
kfreebsd-kernel-headers to @toolchain_regex. Thanks to Clint Adams
(Closes: #425855).
* Sbuild/Log.pm.in:
- Remove trailing whitespace.
- open_log, open_pkg_log: Ignore SIGINT, SIGQUIT, SIGTERM and SIGPIPE
in the logger processes, so that logging continues if the process
group is signalled to terminate. They will exit when the group leader
exits or closes the pipe.
* debian/changelog: Fix missing colon in bug closure for revision 0.2.4.
* debian/compat: New file. Set to debhelper compatibility level 5.
* debian/control: Depend on debhelper v5.
* debian/NEWS: Renamed from debian/NEWS.Debian (Closes: #425370).
Thanks to Lucas Nussbaum for spotting this.
* debian/rules: Remove DH_COMPAT.
-- Roger Leigh <rleigh@debian.org> Mon, 28 May 2007 00:38:46 +0100
sbuild (0.54) unstable; urgency=low
* debian/control:
- Remove sudo from Depends.
- Add schroot to Depends.
- Remove schroot from Recommends.
- Depend on dctrl-tools rather than the transitional grep-dctrl package.
Thanks to Jonh Wendell (Closes: #417573).
* debian/rules:
- Don't install sbuild.conf.local.
- Install sbuild.conf into /etc/sbuild.
* debian/NEWS.Debian:
- New file.
- Document removal of manual source dependencies and sudo.
- Document removal of support for building from a directory.
- Document removal of building on the host system.
- Document sudo->schroot migration.
- Document change in $sbuild_mode default.
* debian/README.Debian:
- Document removal of manual src-deps.
- Remove requirements for chroot symlinks in working directory.
* sbuild:
- Remove read_deps, so manual src-deps are no longer read. The
remainder of the manual src-deps support remains to be removed.
- Quote all arguments to system commands such as "rm -rf", to prevent
potential disasters.
- Update copyrights, and encode in UTF-8.
- Use "du -k -s" instead of "du -s" to increase portability. Thanks to
Martin Koeppe (Closes: #418061).
- Compute package, version, directory and whether to download sources
before calling fetch_source_files, because all the needed information
is available at this point.
- cleanup_packages:
+ Remove check for schroot when removing build dependencies, since
schroot is the default.
+ Remove undo_specials().
- build:
+ Remove do_apply_patches.
+ Replace "822-date" with "date -R". Thanks to Guillem Jover for
this patch (Closes: #415798).
+ Remove support for building from a directory.
+ Run dpkg-source from within the chroot.
+ Don't chdir before running dpkg-source.
+ Don't chdir before running dpkg-parsechangelog (do it in the
schroot child process).
+ Remove obsolete code for running dpkg-buildpackage outside a chroot.
- fetch_source_files:
+ Remove support for building from a directory.
+ Download sources directly into the chroot build directory. For
sources already existing outside the chroot, copy them into the
chroot build directory.
+ Add extra directory, package, version and download arguments.
+ Only call dsc_md5sums once, rather than twice.
- apply_patches: Remove.
- get_special: Remove use of @main::global_patches.
- Remove SVN Id:.
- install_deps: Remove @special use.
- unpack_special_source: Remove.
- undo_specials: Remove.
- filter_dependencies: Remove @special use.
- run_script: Remove.
- parse_one_srcdep: Remove @special use.
- get_special: Remove.
- write_srcdep_lock_file: Remove @special use.
- check_srcdep_conflicts: Remove @special use.
- dump_main_state: New function to dump the program state using
Data::Dumper. Use to dump the state after each build.
- Add / separators to all users of $main::chroot_build_dir in paths.
- Replace all users of regular expressions to strip the chroot dir
from paths with strip_chroot_path.
- get_dpkg_status: Print debugging messages with defined variables
only, to avoid Perl warning.
- verify_md5sums: Remove obsolete comment regarding chroots.
- check_group_membership: New function to check the user is a member
of the sbuild group (Closes: #414064).
- Added new command-line argument --arch to specify the architecture,
and pass this to begin_session (Closes: 410576).
* Sbuild/Chroot.pm:
- Remove all special casing for sudo and schroot. schroot is now the
only supported method of accessing chroots.
- end_session: Only attempt to end a session when $schroot_session is
non-empty.
- _setup_options:
+ Remove use of $chroot_only.
+ Remove trailing / from 'Build Location'.
- init: Add newline to debugging message.
- strip_chroot_path: New function to strip the chroot location from a
path.
- log_command: Correctly log commands when no APT Options stripping is
needed.
- get_command_internal: Set the working directory inside the chroot to
the build location.
- begin_session: take the architecture as a second argument, and check
if a chroot specific for the architecture exists.
* Sbuild/Conf.pm:
- Don't export $source_dependencies.
- Don't define $source_dependencies.
- Abort with an error if $source_dependencies is defined.
- Don't export $sudo or $chroot_mode.
- Don't define $sudo or $chroot_mode.
- Remove sudo sanity checks.
- Abort with an error if $sudo or $chroot_mode are defined.
- Don't export $chroot_only.
- Don't define $chroot_only.
- Abort with an error if $chroot_only is defined.
- Define and export %alternatives. Thanks to Martin Koeppe
(Closes: #418060).
- Define and export @no_auto_upgrade and %watches.
- Remove the requirement for /usr/share/sbuild/sbuild.conf.
- Mark deprecated/obsolete variables for removal post-Lenny.
- Set defaults from global sbuild.conf.
* sbuild.conf:
- Remove $source_dependencies.
- Remove $sudo.
- Remove $chroot_only.
- Add and document all options from Sbuild/Conf.pm.
- Reorder into sections.
- Merge with sbuild.conf.local, and install into /etc/sbuild.
* sbuild.conf.local:
- Remove $source_dependencies.
- Remove.
* example.sbuildrc:
- Replace all options with documented options from sbuild.conf.
- Add additional user-centric options from sbuild.conf.
- Reorder into sections.
* sbuild.1.in: Document --arch and chroot search order.
* sbuild-setup.7.in:
- Remove sudo setup.
- Update user section to document sbuild group membership and
add_sbuild_user. Remove chroot setup, which is now handled by
schroot (Closes: #413524).
* bin/README.bins: Remove sudo from extra package list.
* bin/updatechroot, bin/upgradechroot, bin/chrapt: Remove chroot_mode.
* chroot/add_sbuild_user:
- Remove sudo setup instructions and copying of /etc/sudoers to the
chroot.
- Rewrite in perl. Only call adduser; all other chroot setup is
taken care of by the 50sbuild schroot chroot setup script
(Closes: #413908).
* TODO: New file. Document needed changes.
-- Roger Leigh <rleigh@debian.org> Fri, 18 May 2007 17:46:31 +0100
sbuild (0.53) unstable; urgency=low
* Sbuild/Conf.pm: Add and export check_watches configuration variable.
* sbuild:
- Set umask to 022 so that dpkg-buildpackage always runs with a sane
umask (Closes: #405836).
- check_watches: Don't check watches if check_watches configuration
variable isn't set (Closes: #397123).
- get_apt_policy: Allow ~ in version numbers. Thanks to Frank
Lichtenheld for this patch (Closes: #407293).
- When running apt-cache, divert STDOUT to the package log, so that
warnings do not get mailed separately (Closes: #399178).
- fetch_source_files:
+ Correct indentation, and error with brace placement which caused
apt-cache output to not be used.
+ Add package information into the key of the %entries hash, in
order to cope with multiple packages being returned by apt-cache.
Based on a patch by Goswin von Brederlow for Bug #408091.
* sbuild.conf: Obsolete $source_dependencies.
* sbuild.conf.local:
- Add pgp_options from sbuild.conf (Closes: #398128).
- Add check_watches.
- Obsolete $source_dependencies.
* update-sourcedeps, update-sourcedeps.1.in: Remove (Closes: 409642).
Thanks to Kenshi Muto for reporting that it no longer works.
* debian/rules, debian/manpages, debian/README.Debian: Remove support
for update-sourcedeps, and note that sourcedeps support is obsoleted
and will be removed in Lenny.
-- Roger Leigh <rleigh@debian.org> Sun, 11 Feb 2007 10:18:12 +0000
sbuild (0.52) unstable; urgency=low
* New upstream release.
* sbuild: Remove incorrect WannaBuild:: prefix from version_compare.
-- Roger Leigh <rleigh@debian.org> Sat, 21 Oct 2006 21:23:16 +0100
sbuild (0.51) unstable; urgency=high
* Urgency is high because this version fixes an RC bug in testing.
* Sbuild.pm: Fix handling of ~ in versions (merge from upstream SVN cset
100; Closes: 392752).
* sbuild, Sbuild/Conf.pm, sbuild.conf.local: Add support for setting APT
policy, to allow building from experimental and sarge-backports.
Thanks to Wouter Verhelst for this patch, which has been slightly
modified to add configurability and adapt to this version of sbuild.
* sbuild:
- Don't run md5sum inside the chroot. Thanks to Michael Banck
(Closes: #392323).
- chroot_arch(): New function to detect build architecture from
within the chroot. Thanks to Kees Cook (Closes: #392992).
* Sbuild/Conf.pm: Fix check for schroot. Thanks to Julien Danjou for
finding this (Closes: #392751).
* sbuild-setup.7.in: Correct example commandline for debootstrap.
Thanks to Alex Pennace (Closes: #391277).
-- Roger Leigh <rleigh@debian.org> Sat, 21 Oct 2006 10:13:00 +0100
sbuild (0.50) unstable; urgency=low
* debian/copyright: Add Alioth file download location.
* chroot/add_sbuild_user:
- Fix chrapt command examples in output to use correct option syntax,
thanks to Matthias Julius (Closes: #381186).
- Add SHELL to sudoers env_keep.
* sbuild:
- dsc_md5sums: Return hashref on failure, rather than -1.
- verify_md5sums: Only run md5sum if there is one or more md5sum to
verify, to prevent md5sum waiting forever on stdin if there are no
files to check. Thanks to Daniel Stone.
* Sbuild.pm: Use new binNMU versioning scheme (+bn), taken from
wanna-build SVN. Thanks to Clint Adams (Closes: #384137).
* Sbuild/Conf.pm: Check sudo does not strip SHELL from the environment.
* sbuild-setup.7.in: Document needed addition of SHELL to sudoers
env_keep (Closes: #389815).
-- Roger Leigh <rleigh@debian.org> Fri, 29 Sep 2006 14:08:11 +0100
sbuild (0.49) unstable; urgency=low
* Sbuild/Conf.pm: init checks if APT_CONFIG and DEBIAN_FRONTEND are
being stripped from the environment by sudo (when running in split
mode), and aborts with instructions for correctly configuring sudo.
This prevents apt-get silently using the configuration from the host
system instead of the chroot.
* Sbuild/Chroot.pm: When running in split mode, use the -s option of
su to set the shell used inside the chroot to /bin/sh. This
ensures that a valid shell is always used when the $SHELL is not
available inside the chroot (Closes: 378283).
* sbuild.conf, sbuild.conf.local, update-sourcedeps, sbuild.1.in,
avg-pkg-build-time.1.in: Update to use the new configuration file
locations.
-- Roger Leigh <rleigh@debian.org> Sat, 15 Jul 2006 23:42:09 +0100
sbuild (0.48) unstable; urgency=low
* Sbuild/Chroot.pm: Use su, rather than sudo, inside the chroot. This
prevents the APT_CONFIG and DEBCONF_FRONTEND environment variables
from being removed (Closes: #376020).
* Sbuild/Conf.pm: Add $Sbuild::Conf::su.
* sbuild-setup.7.in: Remove sudo configuration inside the chroot, now
this is no longer required.
-- Roger Leigh <rleigh@debian.org> Sun, 9 Jul 2006 18:18:33 +0100
sbuild (0.47) unstable; urgency=low
* bin/checkchroot: Correct uninitialised value warnings due to using an
undefined variable (Closes: #369709).
* bin/chrapt, bin/updatechroot, bin/upgradechroot: When chroot_mode is
"schroot", chdir to / to ensure the CWD exists inside the chroot.
Thanks for Clint Adams for finding this (Closes: #372806).
* sbuild: fetch_source_files: When running apt-cache, check if we got
valid output, and warn appropriately if the output is invalid
(Closes: #369707). Output may be invalid if there are no deb-src
lines in /etc/apt/sources.list in the chroot.
* Sbuild/Conf.pm: Remove $Sbuild::Conf::log_dir checks.
* Sbuild/Log.pm.in: If $Sbuild::Conf::log_dir does not exist, try to
create it, and if this fails, warn and log to stdout
(Closes: #369718).
-- Roger Leigh <rleigh@debian.org> Sat, 17 Jun 2006 12:04:36 +0100
sbuild (0.46) unstable; urgency=low
* sbuild:
- fetch_source_files: Only print "apt-get update" invocation in debug
mode.
- get_dpkg_status: Make sure $version is defined before checking its
value, to ensure the Debian version can have a value of 0. Thanks
to Santiago Vila for this fix (Closes: #368066).
* Update svn::ignore properties to ignore generated files.
* debian/control:
- Update to Standards-Version 3.7.2.
- Use Build-Depends, rather than Build-Depends-Indep.
-- Roger Leigh <rleigh@debian.org> Sat, 27 May 2006 15:22:02 +0100
sbuild (0.45) unstable; urgency=low
* bin/checkchroot:
- Check if the dpkg and reference files contained any data, and exit
with an error if either were empty (Closes: #363351).
- On error, use Sbuild::Utility::shutdown to clean up.
* bin/chr-hold, bin/chr-unhold: On error, use Sbuild::Utility::shutdown
to clean up.
* sbuild:
- build: Only print dpkg-buildpackage invocation in debug mode.
- uninstall_debs: Only print dpkg invocation in debug mode.
* debian/control: Update to Standards-Version 3.7.0.
-- Roger Leigh <rleigh@debian.org> Mon, 1 May 2006 09:48:20 +0100
sbuild (0.44) unstable; urgency=low
* avg-pkg-build-time: Use Sbuild::Conf.
* bin/checkchroot: Convert to Perl, using Sbuild::Utility.
* bin/chrapt: Convert to Perl, using Sbuild::Utility.
* bin/chr-hold: Convert to Perl, using Sbuild::Utility.
* bin/chr-unhold: Convert to Perl, using Sbuild::Utility.
* bin/gochroot: Convert to Perl, using Sbuild::Utility.
* bin/updatechroot:
- Convert to Perl, using Sbuild::Utility.
- chrapt is no longer used (Closes: #355035).
- Sbuild::Chroot is used for chroot access:
+ Suite names are no longer hardcoded (Closes: #355037).
+ APT Options are set correctly (Closes: #355038).
* bin/upgradechroot: Convert to Perl, using Sbuild::Utility.
* bin/common_functions: Remove; this is no longer used.
* sbuild:
- Treat schroot chroots with a "-sbuild" suffix in the same way as
chroots without a suffix (Closes: #360124).
- Use the new modules Sbuild::Chroot, Sbuild::Conf and Sbuild::Log.
The functions moved into the modules have been removed.
- Import needed module functions into the local namespace, to avoid
long namespace prefixes on functions.
- Remove $main::chroot_apt_options.
- Move $main::debug to Sbuild::Conf.
- Import Sbuild::Conf into package "conf". This allows the package
name used by upstream to be used for backward compatibility.
- Use $conf::HOME instead of $main::HOME.
- Move $main::username to Sbuild::Conf.
- Set $main::chroot_dir, $main::chroot_build_dir,
$main::srcdep_lock_dir and $main::ilock_file from the current
chroot $Sbuild::Chroot::current. $main::srcdep_lock_dir replaces
$conf::srcdep_lock_dir (which is still used to set when the chroot
is set up).
- Pass $main::distribution to open_log and open_pkg_log.
- Remove $main::cwd, $main::nolog and $main::verbose, now provided by
Sbuild::Conf. They are imported from Sbuild::Conf for backward
compatibility.
- Remove unused $main::HOSTNAME.
- Add build statistics to close_pkg_log.
- Die if no maintainer_name, uploader_name or key_id is specified.
- Set and unset $main::binNMU_name in the main loop, rather than when
opening and closing the package log. In consequence, open_pkg_log
now needs the package name only, and close_pkg_log does not need
the package name passing.
- build:
+ Set $firstline to "" to quell a warning.
+ Use debian_files_list to check for missing or extra packages, and
warn appropriately.
+ Delete erroneous _all.deb files (Closes: #357042).
- Don't use File::Temp (only needed by modules).
- Remove build directory check.
- Use File::Basename::basename instead of Sbuild::basename.
- Don't import internal Sbuild::Chroot functions.
- Split verify_dsc_md5sums into two parts: dsc_md5sums and
verify_md5sums.
- debian_files_list: New function to parse debian/files.
* Sbuild/Chroot.pm:
- New perl module for chroot operations. It contains the functions
begin_session, end_session, log_command, get_command_internal,
get_command, run_command, exec_command, get_apt_command_internal,
get_apt_command and run_apt_command.
- Don't export init and log_command.
- Don't hardcode a list of chroots; use a glob to search for chroot-*
instead. This allows any distribution name to be specified with -d.
- Add an "APT Options" attribute to the chroot hash, to replace
$main::chroot_apt_options.
- Use STDERR instead of PLOG (which may not be available).
- Replace $main::debug with $Sbuild::Conf::debug.
- Replace $main::username with $Sbuild::Conf::username.
- begin_session takes the distribution as its first argument, rather
than using $main::distribution.
- Don't use $main::chroot_dir. Add the build paths as 'Build Location',
'Srcdep Lock Dir' and 'Install Lock' to the chroot metadata.
- Use File::Temp.
- Don't export "internal" functions.
- _setup_options: Set "APT Options" for schroot chroots.
- log_command: Don't substitute CHROOT_APT_OPTIONS when no APT options
are in use.
* Sbuild/Conf.pm:
- New perl module for configuration variables. It reads the system
and user configuration.
- Add $debug.
- Add $username.
- Add $cwd, $nolog and $verbose. They exported and used by the other
modules in place of the variables in the main package.
- Add and export $avg_time_db, $avg_space_db, $maintainer_name,
$uploader_name and $key_id.
- Add build directory check (moved from sbuild).
* Sbuild/Log.pm:
- New perl module for logging. It contains the functions open_log,
close_log, open_pkg_log, close_pkg_log, add_time_entry,
add_space_entry, send_mail and log_symlink.
- $main::main_logfile and $main::pkg_logfile are package variables.
- Removed use of $main::distribution. The distribution name must be
passed to open_log or open_pkg_log.
- Don't use $main::HOSTNAME or $main::arch. Get the values directly.
- open_pkg_log: Save the package name for future use; the binNMU name
(if any) is passed, so this no longer needs computing.
- close_pkg_log:
+ Obtain $main::pkg_status, $main::pkg_start_time,
$main::pkg_end_time and $main::this_space from the function
arguments.
+ Don't pass the package name, which was saved in open_pkg_log.
- add_space_entry: Use $space rather than $t, and don't use
$main::this_space.
- Use File::Temp.
- Use File::Basename::basename instead of Sbuild::basename.
* Sbuild/Utility.pm: New perl module for utility programs. This is a
perl replacement for bin/common_functions.
* bin/checkchroot:
- Quote all variables.
- Sort ref-chroot file before diffing (Closes: 360058).
* avg-pkg-build-time.1.in, sbuild.1.in, sbuild-setup.7.in,
update-sourcedeps.1.in, Sbuild/Log.pm.in: Rename and embed version and
date tags for substitution.
* COPYING: New file (GPL licence text).
* debian/control: Update uploaders.
* debian/copyright:
- Update with new subversion repository locations for upstream and
Debian.
- Add Roger Leigh as a copyright holder.
- Add a reference to /usr/share/common-licenses/GPL.
* debian/dirs: Add usr/share/perl5/Sbuild.
* debian/rules:
- Install Sbuild/Chroot.pm, Sbuild/Conf.pm, Sbuild/Log.pm and
Sbuild/Utility.pm into /usr/share/perl5/Sbuild.
- Generate all manual pages and Log.pm in the build rule, and remove
them in the clean rule.
-- Roger Leigh <rleigh@debian.org> Fri, 7 Apr 2006 09:47:00 +0100
sbuild (0.43) unstable; urgency=low
* sbuild:
- verify_dsc_md5sums(): New function to verify the MD5SUM of files in a
.dsc file.
- Add $conf::md5sum for security.
- fetch_source_files():
+ Use verify_dsc_md5sums to check for incomplete downloads, and
redownload sources if needed; also verify again after download
(Closes: #270439).
+ Remove redundant braces and reindent.
- build(), shutdown(): Quote kill command correctly (Closes: #356686).
- When using schroot, look for a distribution named
"$distribution-sbuild" in preference to "$distribution".
- open_log(), open_pkg_log():
+ Use fork() rather than tee to multiplex log output.
+ Don't buffer log output (Closes: #358717).
- close_log(), close_pkg_log(): Close all dup'd log streams, and don't
kill the child log processes, which avoids dataloss in the pipeline.
- log_symlink(): New function to create a symbolic link to the current
package log. This replaces the use of /bin/ln, which has races if
concurrent builds use it.
- open_log(), close_log():
+ Save a references to the initial STDOUT and STDERR, and restore
them when the log is closed.
+ Create the build log using File::Temp, in the form
build-distribution-date.XXXXXX.log. This prevents races during
logfile creation when running concurrent builds. If the file
is empty, it is unlinked on close, irrespective of whether
verbose mode is used or not.
- open_pkg_log(): Use the saved STDOUT for verbose logging. This
prevents the package log being also directed to the build log.
- setup_options(): Remove unused call to tmpnam().
- check_dependencies(): Print kernel information along with the
toolchain package versions, in the same style as reportbug.
- build(): Check for _all.udeb files which are built when they
shouldn't (merge from upstream SVN cset 98).
- Strip "./" from $pkg, so the name used for source dependencies is
correct (Closes: #359747).
- Add --force-orig-source option to force the inclusion of the
.orig.tar.gz (Closes: #318030).
- Add $conf::force_orig_source to allow --force-orig-source to be
specified in a .sbuildrc.
* sbuild.1:
+ Document schroot chroot naming.
+ Document --force-orig-source option.
+ Correctly escape hyphens in option and file names.
* sbuild-setup.7: Use debootstrap rather than cdebootstrap.
* bin/common_functions: Allow any chroot name to be specified
(Closes: #356785).
* bin/README.bins: Document changed chroot syntax.
* bin/checkchroot: Set LC_COLLATE=POSIX to prevent collation issues
(mismatches with the reference file; Closes: #294883).
* bin/common_functions, bin/README.bins: Remove ~/build/ from the
chroot path, to match sbuild behaviour of searching in the
current directory (Closes: #355034).
* chroot/README-buildd.chroot: Fix typo.
* chroot/buildd.chroot: Use debootstrap rather than cdebootstrap
(Closes: #358668).
* debian/control: Recommend debootstrap rather than cdebootstrap.
* example.sbuildrc: Add example $force_orig_source, with documentation.
-- Roger Leigh <rleigh@debian.org> Wed, 29 Mar 2006 14:58:32 +0100
sbuild (0.42) unstable; urgency=low
* sbuild:
- get_apt_command_internal(): Always add $main::chroot_apt_options.
- log_command(): Add an additional priority argument. If nonzero,
the message is always logged, otherwise is only logged if debug is
enabled.
- get_command_internal(): When running schroot, preserve the user
environment, needed for APT_CONFIG, DEBIAN_FRONTEND, etc..
- get_command(), run_command(), exec_command(), get_apt_command(),
run_apt_command():
+ chdir to $main::cwd to make sure the directory location also exists
inside the chroot.
+ Add an additional priority argument to control the urgency of the
log message, and pass this to log_command().
- get_virtuals(): Remove usage of $main::chroot_apt_options, which is
added automatically by get_apt_command().
- get_command(), run_command() and exec_command() only log the full
command when debugging is enabled, otherwise only the short form is
logged (Closes: #355043).
- setup_options():
+ Ensure APT_CONFIG is set to the correct path depending upon the
chroot_mode. $chroot_aptconf is the absolute path to the file from
the host system, while $aptconf is the absolute path when apt is
run.
+ Only set $main::chroot_apt_options when chroot_mode is "split".
+ Always regenerate apt.conf, because when chroot_mode is changed, it
will break APT unless rewritten.
+ Don't set "Dir" in $chroot_aptconf when in chroot_mode is "schroot"
(because apt is run inside the chroot).
- Remove setpgrp() calls, so that all child processes run in the same
process group as the parent.
- Add a $conf::sbuild_mode, used to switch behaviour between user and
buildd defaults. The default is "buildd". This allows package build
errors to be reported (Closes: #170742).
- Add a --quiet option, the opposite action to --verbose.
- open_pkg_log():
+ Use correct Sbuild:: namespace for binNMU_version (Closes: #355861).
+ Create current-distribution symlink in addition to current.
- Set the in the environment SHELL=/bin/sh, in case the user
invoking sbuild uses a shell not available inside the chroot.
- Remove unused variables @dist_parts and $main::nomail.
- Use correct use syntax for File::Temp and Cwd, and initialise a
number of variables which would otherwise be undefined, in order
to remove run-time warnings.
- Add a number of checks for undefined variables to remove run-time
warnings.
- Add -w to the shebang line, so sbuild always runs with warnings
enabled.
- All exec commands other than writing logfiles now use exec_command,
so they get logged.
- Require /usr/share/sbuild/sbuild.conf and optionally require
/etc/sbuild/sbuild.conf.
- Use named signals, rather than numbers, for portability.
- close_log(), close_pkg_log: If verbose is enabled, flush the log and
wait a second before killing tee, to prevent data loss in the pipeline.
- $main::verbose is set by default if running on a tty (Closes: #355802).
- LOG and PLOG are set to autoflush using IO::Handle.
- $conf::build_dir defaults to $main::cwd if undefined. It is used as
the directory containing the build chroots, build logs, and current
symlinks (Closes: #183022).
- Always print toolchain packages. This is done by always calling
merge_pkg_build_deps(), and running all the way through
install_deps(), even when the package does not supply any build
dependencies or conflicts (Closes: #355040).
- install_deps():
+ If there are no package dependencies, create an
empty anonymous array reference to hold the (nonexistent)
dependencies, required by filter_dependencies.
+ Make sure %entries is initialised.
- fetch_source_files(): Check that the dsc specified is valid.
* sbuild.conf: Don't require local config file.
* sbuild.conf.local: Add $sbuild_mode, defaulting to "buildd".
* example.sbuildrc: Add $build_dir example.
* sbuild.1: Document --quiet.
* sbuild-setup.5:
- Split chroot setup and user setup into two sections.
- Document sudoers env_keep setup (Closes: #355072, #355604).
* Sbuild.pm: Remove unused module 'IO'.
* chroot/add_sbuild_user: Add sudoers env_keep example.
* debian/README.Debian: Document existence of sbuild-setup(7).
* debian/control:
- Depend on perl-modules (for File::Temp).
- Recommend schroot 0.2.7 or later (for preserving the environment).
* debian/dirs: Add etc/sbuild.
* debian/rules:
- Remove "make clean" in clean target; there is no Makefile, so this is
redundant.
- Install sbuild.conf as /usr/share/sbuild/sbuild.conf and
sbuild.conf.local as /etc/sbuild/sbuild.conf.
* debian/preinst:
- New conffile.
- Remove /etc/sbuild.conf.local if not locally modified.
* debian/postinst:
- Move /etc/sbuild.conf.local to /etc/sbuild/sbuild.conf if needed.
- Reindent.
* debian/postrm:
- Unlink /etc/sbuild.conf if present.
- Unlink files under /var/lib/sbuild.
- Reindent.
-- Roger Leigh <rleigh@debian.org> Mon, 13 Mar 2006 00:14:00 +0000
sbuild (0.41) unstable; urgency=low
* sbuild:
- setup_options(): Set $main::chroot_apt_options in the same
manner as upstream.
- setup_options(): Correct usage of a scalar reference rather than
the scalar $main::chroot_dir (Closes: #354520).
-- Roger Leigh <rleigh@debian.org> Mon, 27 Feb 2006 19:07:59 +0000
sbuild (0.40) unstable; urgency=low
* sbuild:
- Fix typos in debug statement ($main::distribution rather than
$main::distribtion, and $main::schroot_session rather than
$main::scroot_session). Thanks to Adeodato Simó for this fix
(Closes: #354456).
- get_schroot_info(): Parse schroot "--info" Path (chroot location)
output.
- get_schroot_info(): Parse schroot "--info" Type (chroot type)
output, and if "plain", always set $main::dist_sessioncaps to 0
("plain" chroots may say they are session-managed, but do not
support full session management, so they always need cleaning).
* debian/control:
- Recommend schroot (>= 0.2.5), for its "Path" information in --info
output, used for determining the chroot location.
-- Roger Leigh <rleigh@debian.org> Sun, 26 Feb 2006 22:19:04 +0000
sbuild (0.39) unstable; urgency=low
* sbuild:
- fetch_source_files(): Merge from upstream SVN (cset 94); Strip trailing
whitespace from each line in $dscfile/debian/.sbuild-build-deps
early on, making all subsequent regexes simpler.
- Update copyright notice (add myself as a copyright holder).
- Add %main::sessioncaps to store whether or not a chroot is
session-capable. Check the schroot "Session Managed" attribute to
determine session capability.
- If a chroot is session-capable, skip running uninstall_deps() (thanks
to Reinhard Tartler).
- Add debugging messages for distribution selection and schroot
session creation (thanks to Reinhard Tartler).
* debian/control:
- Recommend schroot (>= 0.2.3-2), for its "Session Managed"
information in --info output, used for skipping chroot cleanup.
-- Roger Leigh <rleigh@debian.org> Tue, 21 Feb 2006 23:44:19 +0000
sbuild (0.38) experimental; urgency=low
* Full sudo access is no longer mandatory when using the schroot
chroot_mode (Closes: #287669, #331506).
* schroot session management is now fully implemented and completely
functional.
* sbuild:
- Move schroot metadata parsing to a separate function,
get_schroot_info(). Parse both "Location" (for
backwards-compatibility) and "Mount Location".
- Move path and APT setup into a separate function, setup_options().
- Remove check_dpkg_version(). This has not been necessary since the
release of potato (Debian 2.2), which had a dpkg version 1.6.14.
- When $chroot_mode == "schroot", clear %main::dist_order and
%main::dist_locations using an empty array, rather than undef.
- New functions get_command(), run_command(), get_apt_command() and
run_apt_command() to run a command inside or outside the build
chroot under the specified user, or run apt inside or outside the
chroot (depending on the chroot_mode), respectively.
- New function exec_command(). This is the same as run_command(), but
runs the command with exec rather than system().
- New functions log_command() to log a command being run,
get_command_internal() and get_apt_command_internal() to get a
command string without logging it; these are used by get_command(),
run_command, exec_command(), get_apt_command() and run_apt_command(),
which do log the command being run. Commands are logged in for all
chroot modes.
- get_apt_command() and run_apt_command() take an additional parameter,
the command to run (apt-get or apt-cache).
- get_apt_command() and run_apt_command() take an additional parameter,
the user to run as, because not all commands need (or should) run as
root.
- Use new commands for running commands inside and outside chroots:
+ Signing options for dpkg-buildpackage are double-quoted rather than
single-quoted (because the main command is single-quoted).
+ All commands run in a pipeline are obtained with get_command() or
get_apt_command().
+ All other commands are run with run_command(), exec_command() or
run_apt_command().
+ check_space() only requires root access in the chroot.
- Add schroot session management. Sessions are created, run and
removed automatically. The current session is stored in
$main::schroot_session. setup_options is called once per build, in
order to set up the session options.
- Add missing newline to log message.
* sbuild.1:
- Update outdated information.
- Correct macro usage and reindent.
- Correct command-line summary (Closes: #311589).
* sbuild-setup.7: New manpage. This describes how to set up a chroot
(Closes: #311363).
* avg-pkg-build-time.1: Clean up.
* update-sourcedeps.1: Clean up.
* sbuild.conf: $schroot_options defaults to "-q" to match the built-in
default.
* example.sbuildrc: Single quote example email addresses in
$maintainer_name, $uploader_name, and $key_id (Closes: #341327).
* chroot/buildd.chroot:
- Use "set -e" to abort on all errors (Closes: #342357).
- Correctly quote all shell variables.
- Use cdebootstrap rather than debootstrap.
* chroot/buildd.chroot.pre-sarge: Remove.
* chroot/README-buildd.chroot.pre-sarge: Remove (Closes: #308065).
* debian/control:
- Recommend schroot.
- Recommend cdebootstrap rather than debootstrap.
* debian/README.Debian: Update information about src-deps and schroot.
-- Roger Leigh <rleigh@debian.org> Wed, 15 Feb 2006 18:13:23 +0000
sbuild (0.37) unstable; urgency=low
* Sync with upstream SVN:
- avg-pkg-build-time, avg-pkg-build-time.1, sbuild, sbuild.1,
update-sourcedeps, update-sourcedeps.1: Update copyright notices with
current FSF postal address.
- sbuild:
+ Split changes files sent in the log every 989 characters, to better
conform to mail RFCs.
+ Always show versions of installed build dependencies.
+ Always purge packages when building in a chroot.
+ Output purged packages line by line, rather than all at once.
+ Use strftime() and getpwuid() instead of the external commands
date and whoami.
+ Use /var/lib/sbuild/apt.conf if it exists, and create it if it does
not. This fixes the problem of the root filesystem
/etc/apt/apt.conf and /etc/apt/apt.conf.d directories being used,
while the copies in the chroot filesystem are ignored.
+ Allow arch: all packages to be built when $main::build_arch_all
is true.
+ Hardware DEBIAN_FRONTEND to "noninteractive" when installing and
purging packages. "apt-get update" is also run when the package
cache is out of date (closes: 331546).
+ Fix support for '~' in version numbers.
+ Add Sbuild.pm (upstream WannaBuild.pm), and replace version_cmp()
with Sbuild::version_compare().
+ Add REDO support for binNMUs.
+ Add stats generation for download+install, build and remove times.
+ Disassociate from the controlling terminal and make stdin /dev/null
for the dpkg-buildpackage process.
+ Don't create entries to the sbuild log when a package claims to
build an _all.deb, but doesn't. Instead, warn to the build log.
+ Delete binary-all packages that we didn't ask to be built.
+ By default, set APT::Get::AllowUnauthenticated to "true".
+ Add $conf::chroot_only for compatibility with upstream
(closes: #302628).
+ Add $conf::dpkg_source.
+ Add $conf::build_env_cmnd.
+ Merge whitespace and indentation changes.
+ Fix typos.
+ shutdown(): Don't close the package log if there is no current job.
+ read_build_essential(): Read build-essential from $main::chroot_dir
instead of the root filesystem.
+ Add @main::toolchain_pkgs and @toolchain_regex.
+ check_space(): Redirect stderr of du to /dev/null.
+ run_apt(): Complete support for "install-deps-env".
+ Add --use-snapshot for building with gcc-snapshot.
+ build(): Remove dpkg-buildpackage debugging statements.
+ merge_pkg_build_deps(): Correctly separate dependencies in $deps,
and don't immediately return if there are missing packages.
+ Remove support for --store-built-packages.
+ get_dpkg_status(): Check $version is set and compute $result in the
same manner as upstream.
+ run_apt(): Remove '*' from $pkgs and $rpkgs.
+ install_deps(): purge packages with "dpkg --set-selections".
schroot support added in addition to upstream changes.
+ fetch_source_files(): Support versioned fetches with apt-get.
+ Add support for auto_giveback_socket: add an extra argument to
--auto-give-back and add an ssh '-S' option to analyze_fail_stage().
+ Support new --make-binNMU options.
+ Add support for $conf::chroot_only, and default to only running in
a chroot for security and safety.
+ cleanup_close: Set $main::current_job to "" and shutdown if
$main::HOME/EXIT-DAEMON-PLEASE exists and we are running in
batchmode.
+ Move "Package claims to have built" error message to the same place
as upstream.
- sbuild.conf:
+ Remove watches.
+ Update alternatives (closes: #280689).
+ Comment out example %individual_stalled_pkg_timeout.
+ Empty @ignore_watches_no_build_deps.
- sbuild.conf.local:
+ Add $chroot_only.
- avg-pkg-build-space.1: Update text.
- example.sbuildrc:
+ Remove $hack_changes_for_frozen.
+ Update comments.
* sbuild.conf.local:
- Use FHS-compliant pathnames, as in sbuild.conf.
* Add support for building from experimental.
* sbuild:
- Parse the .changes rather than debian/files, so that the
.dsc/.diff.gz/.orig.tar.gz are also copied back to ~/build.
- Print information and contents of arch-all packages (closes: #321640).
* debian/control: The maintainer field contains the list address.
-- Roger Leigh <rleigh@debian.org> Tue, 31 Jan 2006 12:58:57 +0000
sbuild (0.36) unstable; urgency=low
Roger Leigh:
* debian/changelog: Convert to UTF-8.
* sbuild:
- Don't fail in the absence of central sourcedeps. These are no longer
required now source packages are required to have build dependencies,
so this should not be fatal.
- Added support for schroot:
+ Added $conf::chroot_mode. This may be set to "split" (the
historical default), or "schroot" (use schroot instead of sudo).
+ All operations using sudo now check the value of $chroot_mode, and
use sudo or schroot accordingly.
+ When using schroot, %main::dist_order is filled using the schroot
chroot priorities.
+ Added %main::dist_locations to store the location of the
available chroots.
- Print a readable error if a chroot does not exist.
* debian/control: Update to Standards-Version 3.6.2.
* debian/copyright: Use the new FSF address.
* debian/conffiles: Remove.
* debian/rules:
- Use debhelper version 4 compatibility mode.
- Move the find -maxdepth option to before non-option arguments, to
fix find warnings.
- Remove template comments.
- avg-pkg-build-space symbolic link should be relative.
-- Roger Leigh <rleigh@debian.org> Sun, 11 Sep 2005 10:02:19 +0100
sbuild (0.35) unstable; urgency=low
Michael Banck:
* bin/abort-current-build: Remove the `-B' from the grep line as
`sbuild -s' does not pass that option to dpkg-configure and abort-
current-build fails in that case.
* sbuild: Set the locale to `POSIX' to make debconf and debhelper calls in
the chroot not spew out locale warnings all the time.
(closes: #287672)
* sbuild: Removed check for specific distributions. Instead, fail if
build/chroot-$dist is not there.
* sbuild: Only override Distribution in .changes if specified as option on
the command-line.
(closes: #300145)
* sbuild: Specify full path for Dir::Etc::main and Dir::Etc::parts.
* example.sbuildrc: Clarify that $maintainer_name is not mandatory and
overrides Maintainer: field, whereas $uploader_name overrides
the Changed-By: field in changes.
* Applied patch by Santiago Vila:
- Moves scripts from /usr/lib/sbuild to /usr/share/sbuild and modifies
all callers accordingly.
- Add -n option to tail to comply with POSIX.
- Call /usr/sbin/sendmail instead of /usr/lib/sendmail.
(closes: #292717)
* sbuild: Tolerate '0' as version number, thanks Santiago Vila.
(closes: #300205)
-- Michael Banck <mbanck@debian.org> Fri, 1 Apr 2005 21:23:30 +0200
sbuild (0.34) unstable; urgency=high
Francesco Paolo Lovergine:
* Removed searchscripts recommendation in debian/control. That was requested
by ppack now removed in archive.
(closes: #272318)
* checkchroot now uses grep-dctrl, thanks Clint Adams.
Introduced dependency from grep-dctrl due to checkchroot.
(closes: #260881,#265994)
* Updated ref-* files for unstable and testing as well as the related README file.
* This is the first revision CVS-enabled.
-- Francesco Paolo Lovergine <frankie@debian.org> Sat, 25 Sep 2004 17:42:57 +0200
sbuild (0.33) unstable; urgency=low
* Man page sbuild.1 revised.
-- Francesco Paolo Lovergine <frankie@debian.org> Thu, 16 Sep 2004 16:42:18 +0200
sbuild (0.32) unstable; urgency=low
* Added ~ as a legal character for debian version (post-sarge).
* A few minor changes in README.chroot-buildd and man page.
* Added -k and -e options as overriding for -m default in package signing.
Man page changed to reflect new features.
(closes: #260870)
* Removed the CVS log variable in sbuild in order to import a new sane
tree onto Alioth repo. Old logs are now stored in a new cvslogs.old file.
* Minor revisions to ducumentation files.
* Added Michael Banck as Uploader.
-- Francesco Paolo Lovergine <frankie@debian.org> Thu, 16 Sep 2004 16:14:27 +0200
sbuild (0.31) unstable; urgency=low
* Patch for #239339 revised:
Escaping to manage correctly possible nested RE.
(closes: #268712)
Doing removes only in chroot environment.
(closes: #264834).
* Changed a bit man page to clarify better synopsis.
(closes: #265998)
-- Francesco Paolo Lovergine <frankie@debian.org> Sat, 28 Aug 2004 21:27:12 +0200
sbuild (0.30) unstable; urgency=high
The "later better than never" release.
Thanks Michael Banck, Martin Michlmayr and other submitters for useful patches.
* example.sbuildrc now return 1 to satisfy perl require syntax.
(closes: #228410)
* Now copies the orig.tar.gz into $(CHROOT)/build/<user>/ for non-native packages.
(closes: #239339)
* Corrected abort-current-build to manage correctly ps output.
(closes: #249995)
* Now should manage packages which provides the same pkgs of other yet installed ones.
(closes: #259315)
* build.chroot rewritten to use dbootstrap straight on.
(closes: #235726,#228412,#228412)
* Using dh_installman instead of obsolete dh_installmanpages. Added
debian/manpages for that.
* Alternatives modified for current ones in testing/sid.
(closes: #228792)
-- Francesco Paolo Lovergine <frankie@debian.org> Tue, 3 Aug 2004 18:21:22 +0200
sbuild (0.29) unstable; urgency=low
* Now depends on exim4
(closes: #228591)
* Non "noninteractive" is in lowercase currently.
(closes: #228800)
* Added /usr/bin/avg-pkg-build-space as symlink to /usr/bin/avg-pkg-build-time
(closes: #228445)
* add_sbuild_user corrected to show the true path of example.sbuildrc
(closes: #228411)
* removing obsolete packages in sid, and updated required ones
(closes: #220932)
* README.buildd-chroot updated
(closes: #220933)
-- Francesco Paolo Lovergine <frankie@debian.org> Fri, 23 Jan 2004 20:09:56 +0100
sbuild (0.28) unstable; urgency=low
* Using latest instead of lastest.
(closes: #202740)
* Changing dependencies in buildd.chroot for current gcc.
(closes: #180447)
* Configuration examples now moved into /usr/share/doc/sbuild/examples
Man changed as consequence.
(closes: #208965)
* Policy bumped to 3.6.1.
-- Francesco Paolo Lovergine <frankie@debian.org> Tue, 11 Nov 2003 16:21:33 +0100
sbuild (0.27) unstable; urgency=low
* sg is not available in hurd, removed in postinst and postrm (patch by Michael Banck).
(closes: #206270)
-- Francesco Paolo Lovergine <frankie@debian.org> Wed, 20 Aug 2003 09:03:41 +0200
sbuild (0.26) unstable; urgency=low
* Ugh! Wrong control file. Now really updated as needed.
(closes: #191203)
-- Francesco Paolo Lovergine <frankie@debian.org> Fri, 20 Jun 2003 15:54:11 +0200
sbuild (0.25) unstable; urgency=low
* New maintainer.
Uploaders: Roger Leigh <roger@whinlatter.uklinux.net>
(closes: #191203)
-- Francesco Paolo Lovergine <frankie@debian.org> Fri, 20 Jun 2003 15:17:25 +0200
sbuild (0.24) unstable; urgency=low
* remove -qq from apt-get call in the updatechroot script
* fix upgradechroot output and add -u to -y
* added oldstable to distribution options
* fix for dependency calculation for --arch-all builds from
Martin Kögler (Closes: #180859)
* libpng-dev => libpng12-0-dev in sbuild.conf
* add dpkg-dev to package dependencies - thanks Michael Banck
(Closes: #182234)
* chroot building fix and waldi's patch still to come
-- Rick Younie <younie@debian.org> Sat, 19 Apr 2003 14:41:03 -0700
sbuild (0.23) unstable; urgency=low
* fixed chroot building - thanks Matt Kraai for the patch and
the heads-up - Closes: #167822
* use separate stable and testing/unstable required lists
* updated the ref-* package lists
* added -o/oldstable option to the helper scripts and fixed
their usage strings
-- Rick Younie <younie@debian.org> Wed, 6 Nov 2002 06:07:22 -0800
sbuild (0.22) unstable; urgency=low
* dpkg --root isn't fixed so use ppack for the checkchroot
script, recommend searchscripts instead of suggest
* add a note to README.Debian and the man page that sbuild must be
run in ~/build (or wherever the chroot-* symlink is) for sbuild
to find the chroot (thanks Otavio)
-- Rick Younie <younie@debian.org> Sat, 14 Sep 2002 19:38:16 -0700
sbuild (0.21) unstable; urgency=low
* the new dpkg has gone into testing so add dselect to the
buildd.chroot required list there as well
-- Rick Younie <younie@debian.org> Mon, 19 Aug 2002 22:35:24 -0700
sbuild (0.20) unstable; urgency=low
* added a note that the original tarball has to be in the sbuild work
directory $CHROOT/build/<user> for an "sbuild --source" build
* removed the old potato chroot description; it can be gotten from the
woody version of the package if needed
* have sbuild make a ~/build/current symlink to the current build log
-- Rick Younie <younie@debian.org> Sat, 17 Aug 2002 09:26:55 -0700
sbuild (0.19) unstable; urgency=low
* ref-stable = woody
* re-added deborphan, searchscripts Suggests
* add a note about setting up .sbuildrc
* have sbuild, chrapt ignore base apt.conf{,.d}
* handle dpkg/dselect unstable split in buildd.chroot; copy over
/etc/hosts to chroot
-- Rick Younie <younie@debian.org> Sat, 20 Jul 2002 06:26:05 -0700
sbuild (0.18) unstable; urgency=low
* split ref-testing from ref-unstable instead of symlink as they
differ now
* unstable dpkg --root is broken currently so use ppack instead of
dpkg for checkchroot
* don't 'touch' downloaded source; in buildd context, buildd-watcher
should use ctime not mtime to look for old files
* add a blurb about using chrapt to finish off the chroot build, in
case debootstrap doesn't quite get it right
-- Rick Younie <younie@debian.org> Sat, 20 Jul 2002 06:26:05 -0700
sbuild (0.17) unstable; urgency=low
* removed debconf-utils from unstable reference list
* include Ryan's sbuild changes to allow the buildds to
autobuild for security
* include Ryan's debootstrap script for chroot building
* the SBUILD_CHROOT_ROOT environment variable is gone. The chroots
are now found by the ~/build/chroot-$DIST symlinks or absolute path.
* moved the helper scripts to /usr/lib/sbuild
* wrong switch so the 0.5 changelog was skipped; again, Closes: #138915
* create blank source-dependencies files on install
-- Rick Younie <younie@debian.org> Thu, 11 Jul 2002 01:22:56 -0700
sbuild (0.6) unstable; urgency=low
* added dobuildlog, a shell script for processing build logs:
file a bug, sign the changelog, reply to buildd if you're
an admin
* recommend fakeroot instead of depend as some arches don't have
it. (Closes: #145753)
-- Rick Younie <younie@debian.org> Fri, 3 May 2002 22:22:41 -0700
sbuild (0.5) unstable; urgency=low
* fix copyright file lintian errors
* added ~/.wgetrc warning to man update-sourcedeps man page,
Closes: #138915
-- Rick Younie <younie@debian.org> Wed, 10 Apr 2002 00:27:25 -0700
sbuild (0.4) unstable; urgency=low
* made /etc/sbuild.conf a conffile - thanks Gergely Nagy.
(Closes: #136374)
-- Rick Younie <younie@debian.org> Sun, 3 Mar 2002 21:51:51 -0800
sbuild (0.3) unstable; urgency=low
* added mailfrom config item so the msg body From: can be
overridden
* noninteractive -> Noninteractive for Ryan Murray
* (re-)added conffile sbuild.conf.local for local changes that aren't
suitable for ~/.sbuildrc
* removed the bashrc & profile example files; they were part of my
original local sbuild deb and are just clutter
-- Rick Younie <younie@debian.org> Sat, 23 Feb 2002 11:44:12 -0800
sbuild (0.2.5) unstable; urgency=low
* add From/To headers to sbuild mail - thanks Gergely Nagy
(Closes: #129850)
* added deborphan to Suggests; -f is useful for finding the
minimal chroot for an arch
-- Rick Younie <younie@debian.org> Fri, 18 Jan 2002 18:46:33 -0800
sbuild (0.2.4) unstable; urgency=low
* Closes: #120309 (the ITP)
* the sbuildrc:$source_dependencies config item got lost
* removed Phil Blundell's apt "Replaces:" patch. This is a
workaround for an apt weakness that shouldn't be depended on.
* added fakeroot dependency. Thanks Michael Schmitz.
-- Rick Younie <younie@debian.org> Thu, 8 Dec 2001 05:55:08 -0800
sbuild (0.2.3) unstable; urgency=low
* show all changes in initial *.changes
-- Rick Younie <younie@debian.org> Thu, 6 Dec 2001 05:55:08 -0800
sbuild (0.2.2) unstable; urgency=low
* don't copy /etc/fstab to chroot
-- Rick Younie <younie@debian.org> Sun, 2 Dec 2001 00:34:38 -0800
sbuild (0.2.1) unstable; urgency=low
* dpkg-buildpackage craps out on the unknown -d switch in the
stable chroot.
-- Rick Younie <younie@debian.org> Fri, 30 Nov 2001 06:53:24 -0800
sbuild (0.2) unstable; urgency=low
* Initial package
-- Rick Younie <younie@debian.org> Thu, 8 Nov 2001 00:18:34 -0800