sssd (1.11.7-3) unstable; urgency=medium
* libsss-sudo.postrm: Delete sudoers line from nsswitch.conf, if only
files source left. (Closes: #749722)
* libsss-sudo.postinst: Fix comments.
* libsss-sudo.postinst: Check nsswitch sudoers entry unconditionally,
so that it is added on upgrade too if missing.
-- Timo Aaltonen <tjaalton@debian.org> Fri, 16 Jan 2015 13:53:22 +0200
sssd (1.11.7-2) unstable; urgency=medium
* default, upstart.in: Upstream ticket #2312 is fixed now, so drop the
workaround to run the daemon in the foreground. (Closes: #760353)
* fix-automake-compat.diff: Added an upstream commit to fix configure
with new automake.
* fix-catchchild.diff: Fix build failure with samba 4.1.13, bump
samba-dev build-dependency to match.
-- Timo Aaltonen <tjaalton@debian.org> Thu, 30 Oct 2014 14:49:05 +0200
sssd (1.11.7-1) unstable; urgency=medium
* New upstream release.
* sssd-common.install, sssd-dbus.install: Add new sss_signal helper
and the dbus service using it.
* fix-obsolete-target.diff: Drop syslog.target from the service file.
* libnss-sss.post*: Add sss entry to shadow and services on
nsswitch.conf. (Closes: #761173)
-- Timo Aaltonen <tjaalton@debian.org> Wed, 24 Sep 2014 07:08:04 +0300
sssd (1.11.6-1) unstable; urgency=medium
* New upstream release.
* control: Update my email.
* control: Update vcs urls.
* libnss-sss.postrm: Check DPKG_MAINTSCRIPT_PACKAGE_REFCOUNT before
removing sss entry from nsswitch.conf. (Closes: #748671)
* libpam-sss.prerm: Check DPKG_MAINTSCRIPT_PACKAGE_REFCOUNT before
running pam-auth-update --remove.
* control: Mark libkeyutils-dev, libselinux-dev, libsemanage-dev,
libnl*-dev build-deps as linux-any, as a preliminary step to build
on kfreebsd-*.
* Run wrap-and-sort.
* sssd-dbus: Add a new subpackage for the D-Bus responder.
* control: Demote libsasl2-modules-ldap to Suggests for sssd-ldap.
* generate-config: Bring it back for convenience, but don't run it on
postinst.
* sssd-common.postinst: Remove obsolete config upgrade.
-- Timo Aaltonen <tjaalton@debian.org> Tue, 19 Aug 2014 09:15:13 +0300
sssd (1.11.5.1-2) unstable; urgency=medium
* control: Drop libcmocka-dev and check from build-depends again so
that the package will build on every arch. Test failures will be
fixed in a future upload.
-- Timo Aaltonen <tjaalton@debian.org> Thu, 14 Aug 2014 02:22:57 +0300
sssd (1.11.5.1-1) unstable; urgency=medium
[ Stéphane Graber ]
* Fix upstart job to provide a proper stdin for sssd.
* Update defaults to always pass -i.
[ Timo Aaltonen ]
* New upstream release. (Closes: #745664)
* control: Bump libkrb5-dev build-dependency to 1.12 due to the OTP
features.
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 09 May 2014 14:50:12 +0300
sssd (1.11.5-1) unstable; urgency=medium
* New upstream bugfix release. (Closes: #729982)
* upstart: Run the daemon in foreground and drop expect fork from the
job, should fix issues with upstart getting confused when a backend
fails to start.
-- Timo Aaltonen <tjaalton@ubuntu.com> Tue, 08 Apr 2014 23:39:20 +0300
sssd (1.11.4-1) unstable; urgency=low
* New upstream release.
* control, rules: Add libcmocka-dev and re-add check to build-depends.
Override dh_auto_test so that it shows the test error log if they fail.
* rules: Fix the manpage date handling with a bigger hammer, and
enable it for all manpages not just pam_sss.8. (Closes: #734083)
* Drop an obsolete lintian override from libsss-sudo.
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 21 Mar 2014 13:28:38 +0200
sssd (1.11.3-1) unstable; urgency=low
* New upstream release.
* control: Update policy to 3.9.5, no changes.
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 03 Jan 2014 00:01:29 +0200
sssd (1.11.2-1) unstable; urgency=low
* New upstream release.
* rules, sssd-common.install: Use the correct path for the systemd
service file.
* control: Build depend on libpam0g-dev | libpam-dev.
-- Timo Aaltonen <tjaalton@ubuntu.com> Tue, 19 Nov 2013 15:22:27 +0200
sssd (1.11.1-1) unstable; urgency=low
* New upstream release.
* sssd-common.postinst, generate-config: Don't create a config on install,
drop generate-config. (Closes: #717587)
* sssd-common.postrm: Remove /etc/apparmor.d too, if empty.
* control, rules, sssd-common.install: Install the systemd service
file provided by upstream.
* control: Drop M-A: foreign from sssd-* and add back to sssd instead.
* control: Don't hardcode 'multiarch-support'.
* control: Drop unnecessary multiarch declarations.
* control: Drop obsolete Breaks/Conflicts.
* rules: Enable parallel build.
* control: Add libltdl-dev to build-depends.
* control: Prepare for new unified samba package, adjust build-
dependencies. Thanks, Ivo De Decker! (Closes: #725992)
-- Timo Aaltonen <tjaalton@ubuntu.com> Tue, 06 Aug 2013 17:04:28 +0300
sssd (1.10.0-1) unstable; urgency=low
[ Timo Aaltonen ]
* New upstream release (Closes: #693054, #705357, #711101)
* Update the packaging for the new version, thanks Esko Järnfors!
- Add libsss-idmap0, libsss-idmap-dev packages
- Add sssd Depends on libsss-idmap0
- Add /var/lib/sss/mc directory for the new mmap cache
* Split authentication providers to separate packages and make sssd
a metapackage.
* control: Drop libunistring-dev from build-depends and add libglib2.0-dev
for unicode support.
* sssd-*.install: Install new manpages.
* python-sss.install: py-files got moved under SSSDConfig.
* control, rules: Use default build flags, bump dpkg-dev build-dep to
1.16.1~.
* rules: Install the apparmor profile with -m644.
* python-sss: Add pysss_murmur.so.
* rules, control, sssd-ad-common.install: PAC responder support.
- Add libndr-dev, libndr-standard-dev, libsamba-util-dev, samba4-dev,
libdcerpc-dev to build-depends
- Add -I/usr/include/samba-4.0 to CFLAGS
* control: Mark sssd-common as Multi-Arch: foreign.
* watch: Add a comment about the upstream git tree.
* Replace perl snippet from libnss-sss.post* with sed, drop perl from
Depends. (Closes: #686237)
* compat: Bump compat to 9.
* rules: Set DEB_HOST_MULTIARCH, drop --libdir and remnants of cdbs.
* sssd-common.install: Install the support binaries under the multiarch path.
* rules,sssd-common.postinst: Move generate-config to /usr/share/sssd.
* rules, sssd-common.install: Use the correct install path for the
krb5_locator plugin.
* libnss-sss.postinst: SSSD doesn't handle shadow maps, so don't pretend
that it would.
* libsss-sudo*, control: Remove the soname from the library, move .so to
the libsss-sudo, drop -dev package.
* rules: Pass --datadir, so the path in autogenerated python files is
correctly substituted. (LP: #1079938)
* sssd-krb5-common.dirs: Add krb5 include dir.
* fix-cve-2013-0219*.diff, -0220.diff: Dropped, included upstream.
* libsss-sudo.postrm: Run ldconfig on remove/purge.
* apparmor-profile: Fix the profile to use the multiarch path for it's
helper location (LP: #1175317).
* Add packaging for libsss-nss-idmap0, libsss-nss-idmap-dev,
python-libsss-nss-idmap.
* watch: Updated to work with alpha/beta releases.
* control: Migrate to libnl-3 now that it's supported. (Closes: #688174)
* sssd-common.{preinst,postrm}: Install the apparmor profile in force-complain
mode on install, and remove the profile directory on purge (if empty). Also
migrate from previous setup which installed it as disabled.
(Closes: #676140)
* control: Bump policy to 3.9.4, no changes.
* control: Add libpam-pwquality (>= 1.2.2-1) to libpam-sss depends, which
makes the password stack work in all cases. (LP: #1159983)
* control: Drop check from build-depends for now, to work around a linking bug
in check (#712140) that makes the tests fail on (at least) i386.
[ Stéphane Graber ]
* Add postinst/postrm script for libsss-sudo. Those will add a "sudoers"
entry to /etc/nsswitch.conf upon first installation of the package and
will then take care of adding/removing sss from the stack as required.
* Set CK_DEFAULT_TIMEOUT to 30 so that slower buildds (armhf at least) can
run the tests without hitting the default 4s timeout.
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 05 Jul 2013 14:53:06 +0300
sssd (1.8.4-2) unstable; urgency=low
* fix-cve-2013-0219-1.diff, fix-cve-2013-0219-2.diff,
fix-cve-2013-0220.diff: Upstream commits from the stable tree to fix
recent CVE reports. (Closes: #698871)
-- Timo Aaltonen <tjaalton@ubuntu.com> Wed, 27 Feb 2013 23:38:28 +0200
sssd (1.8.4-1) unstable; urgency=low
* New upstream bugfix release 1.8.2.
- Several fixes to case-insensitive domain functions
- Fix for GSSAPI binds when the keytab contains unrelated
principals
- Fixed several segfaults
- Workarounds added for LDAP servers with unreadable RootDSE
- SSH knownhostproxy will no longer enter an infinite loop
preventing login
- The provided SYSV init script now starts SSSD earlier at startup
and stops it later during shutdown
- Assorted minor fixes for issues discovered by static analysis
tools
* New upstream bugfix release 1.8.3.
- Numerous manpage and translation updates
- LDAP: Handle situations where the RootDSE isn't available anonymously
- LDAP: Fix regression for users using non-standard LDAP attributes for
user information
* New upstream bugfix release 1.8.4. (LP: #981125, #985031)
- Fix a bug causing AD servers not to fail over properly when the KDC
on the primary server is down
- Fix an endianness bug on big-endian systems when looking up services
- Fix a segfault dealing with nested groups (LP: #981125)
- Make the nowait cache updates work for netgroups
- Fix a regression that broke domains with use_fully_qualified_names = True
(LP: #985031)
* control: Move the dependency of libsasl2-modules-gssapi-mit to
Recommends.
* control: sssd works with Heimdal gssapi modules too, add
libsasl2-modules-gssapi-mit as an option for the Recommends.
(LP: #966146)
* libpam-sss.pam-auth-update:
- Drop the dependency to 128, since pam_sss should always be below
pam_unix. (LP: #957486)
- Drop 'use_authtok' from the password stack, since it only works when
pam_cracklib is installed. This will allow password changes on the
default install.
* sssd.postrm: Try to remove /etc/sssd only if it exists.
(Closes: #666226)
* Add disabled by default Apparmor profile (LP: #933342)
- debian/sssd.upstart.in: load the profile during pre-start
- add debian/apparmor-profile, install to /etc/apparmor.d
- debian/rules: use dh_apparmor to install profile before sssd is
restarted
- debian/control: sssd Suggests apparmor (>= 2.3)
- debian/control: Add dh-apparmor to build-depends
- debian/sssd.preinst: disable profile on clean install or upgrades
from earlier than when we shipped the profile
* rules: Mangle the date stamp on pam_sss.8 so that the compressed file is
identical across all archs. (Closes: #670019)
* control: Add build-depends on libnl-dev to enable Netlink support.
* control: Add build-depends on libkeyutil-dev to enable support for
kernel keyring manipulation.
* sssd.logrotate: Rotate logs weekly, keep four previous rotations.
(Closes: #672984)
* sssd.upstart.in: Delete an invisible control character from the pre-start
script. (LP: #1003845)
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 01 Jun 2012 11:43:42 +0300
sssd (1.8.1-1) unstable; urgency=low
* New maintainer, Debian SSSD Team. (Closes: #660985)
[ Timo Aaltonen ]
* New upstream release (1.8.1) (Closes: #647980, #624194, #639965)
- Support for the service map in NSS
- Support for setting default SELinux user context from FreeIPA
- Support for retrieving SSH user and host keys from LDAP (Experimental)
- Support for caching autofs LDAP requests (Experimental)
- Support for caching SUDO rules (Experimental)
* Update build-deps:
- Add libunistring-dev, libdhash-dev, libcollection-dev and
libini-config-dev.
- Add check for unit tests.
- Drop cvs and python-central.
- Migrate to dh, drop cdbs build-dep, add quilt, dh-autoreconf and
autopoint to build-deps.
* Add new packages:
- libipa-hbac0, libipa-hbac-dev, libsss-sudo0, libsss-sudo-dev,
and python-libipa-hbac.
- Split sssd-tools: add Breaks/Replaces sssd (<< 1.8.0~beta3-1) and
add to sssd Suggests
* Drop patch to ensure LDAP authentication never accept a zero
length password, which is now included upstream.
* sssd.upstart.ubuntu:
- Don't start before net-device-up. (LP: 812943)
- Source /etc/default/sssd. (LP: 812943)
* sssd.default: Added a file to include the sssd daemon defaults,
currently has '-D -f'.
* sssd.init: Drop separate OPTIONS, '-D' comes from /etc/default/sssd
now..
* rules: Install the Python API files to /usr/share/sssd, as discussed
with upstream. (LP: 859611)
* fix-python-api-path.dpatch: Use the new location for the API files.
(LP: 859611)
* libpam-sss.pam-auth-update:
- Add 'forward_pass' to auth stack to fix ecryptfs mounts. (LP: 826643)
- Add pam_localuser.so to account stack to allow local users to log in.
(LP: 860488)
* control: sssd now Recommends libpam-sss and libnss-sss, since sssd is
mostly useless without them. (LP: 767337)
* control, compat: Bump debhelper build-dep and compat level to 8.
* Switch patch-system to quilt.
* Do not install a working config file by default. The local domain
definition was broken (upstream #1014). The daemon will need to be
configured by other means before it's usable.
* Add support for Multi-Arch (Closes: #634123).
* Remove unnecessary libnss-sss.links.
* libnss-sss.overrides: Add an override for
"package-name-doesnt-match-sonames".
* Determine the used init system during build, add lsb-release to
build-deps. Default to sysvinit, use upstart if Ubuntu.
* sssd.upstart.in: Test if the config file exists, and exit if not.
* Fail gracefully if invoke-rc.d returns an error on postinst/prerm, like
when the daemon fails to start when there is no config file.
* sssd.init.in: Check that /etc/default/sssd is a real file before sourcing
it (Closes: #587895).
* control: Add libsasl2-modules-gssapi-mit and libsasl2-modules-ldap to
Recommends for sssd.
* rules: Move the rule for purging .la files before dh_install
(Closes: #633206).
* sssd.install: Fix the wildcard for plugins to include .so symlinks.
* rules: Add configure flags
- Disable RPATH
- Disable building static libs
- Enable ssh user and host key retrieval, autofs request
and sudo rules caching. The respective packages need to add support
for these to be useful.
* Drop fix-python-api-path.patch, included upstream.
* sssd.examples: Install the renamed example config.
* rules: Drop special handling of the sssd.api.d, upstream uses
the proper path now.
* rules: Add --fail-missing to dh_install.
* sssd.install: Add new files.
* libpam-sss.install, control: Move pam_sss.8 to the correct package,
add Breaks/Replaces.
* rules: Remove some files we don't want to install, to make dh_install
happy.
* rules: Clean po/*.gmo, po/stamp-po and *.pyc.
* Install lintian overrides using dh_lintian.
* {sssd,libnss-sss}.lintian-overrides: Update.
* Move libsasl2-modules-gssapi to sssd Depends to make sure it gets
installed, as it's needed in most cases.
* control: Update maintainer address and repo location.
* control: Bump the Standards-Version to 3.9.3, no changes.
* control: Bump the debhelper build-dep to 9.
* control: Add ${misc:Depends} to libipa-hbac*, libsss-sudo*.
* control, rules: Migrate to dh_python2 (Closes: #617071).
* control: Add myself to uploaders.
[ Petter Reinholdtsen ]
* New upstream version 1.2.4:
- Resolves long-standing issues related to group processing with
RFC2307bis LDAP servers.
- Fixed bugs in RFC2307bis group memberships related to initgroups
(Closes: #595564).
- Fix tight-loop bug on systems with older OpenLDAP client
libraries (such as Red Hat Enterprise Linux 5)
* New Upstream Version 1.2.3:
- Resolves CVE-2010-2940.
* New Upstream Version 1.2.2:
- The LDAP provider no longer requires access to the LDAP
RootDSE. If it is unavailable, we will continue on with our best
guess.
- The LDAP provider will now log issues with TLS and GSSAPI to the
syslog.
- Significant performance improvement when performing initgroups
on users who are members of large groups in LDAP.
- The sss_client will now reconnect properly to the SSSD if the
daemon is restarted.
* This resolves an issue causing GDM to crash when logging out
of a user after the SSSD had been restarted.
* Correct package description for python-sss (Closes: #596215).
* Update Standards-Version from 3.8.4 to 3.9.1. No changes needed.
[ Stéphane Graber ]
* Fix prerm invoke_failure hook to simply return as empty functions
are invalid shell syntax.
-- Timo Aaltonen <tjaalton@ubuntu.com> Thu, 22 Mar 2012 13:28:27 +0200
sssd (1.2.1-4.4) unstable; urgency=low
* Non-maintainer upload.
* Fix FTBFS with -Werror=format-security. Thanks Philippe De Swert for patch.
(Closes: #643806).
-- Hector Oron <zumbi@debian.org> Sun, 19 Feb 2012 19:33:04 +0000
sssd (1.2.1-4.3) unstable; urgency=medium
* Non-maintainer upload.
* Adjust install path to consider GNU triplet (Closes: #640626).
-- Luca Falavigna <dktrkranz@debian.org> Tue, 20 Sep 2011 20:02:34 +0200
sssd (1.2.1-4.2) unstable; urgency=low
* Non-maintainer upload.
* debian/sssd.install
- updated location for ldb modules; Closes: #618159
-- Sandro Tosi <morph@debian.org> Fri, 03 Jun 2011 23:53:59 +0200
sssd (1.2.1-4.1) unstable; urgency=medium
* Non-maintainer upload by the Security Team
* Fix CVE-2010-4341 (Closes: #610032)
-- Moritz Muehlenhoff <jmm@debian.org> Tue, 25 Jan 2011 22:09:21 +0100
sssd (1.2.1-4) unstable; urgency=low
* Add patch from Stephen Gallagher to ensure LDAP authentication
never accept a zero length password (Closes: #594413). Solves
CVE-2010-2940.
-- Petter Reinholdtsen <pere@debian.org> Wed, 25 Aug 2010 22:33:40 +0200
sssd (1.2.1-3) unstable; urgency=low
[ Petter Reinholdtsen ]
* Look for /etc/default/sssd, not /etc/defaults/sssd in init.d
script (Closes: #588252).
* Make sssd.conf generation more robust, and make sure missing SRV
records are ignored and not handled as host names.
* Add code in generate-config to look up Kerberos realm using
_kerberos TXT record in DNS if it exist.
* Recommend bind9-host used by generate-config for SRV and TXT
lookups.
[ Morten Werner Forsbring ]
* Check if /etc/default/sssd is a file and executable, not a directory,
before sourcing in init-script. Thanks to lintian.
-- Morten Werner Forsbring <werner@debian.org> Thu, 12 Aug 2010 16:31:14 +0200
sssd (1.2.1-2) unstable; urgency=low
* Make sure init.d script sources /etc/default/sssd (Closes: #588252).
* Drop /etc/default/sssd from package, to avoid conffile question
from dpkg during upgrades.
* Make sure to only remove obsolete sssd conffiles on upgrades, not
on first time installation.
* Add new script generate-config and call it from the sssd postinst
during first time installation to try to generate the sssd.conf
file dynamically for LDAP and Kerberos using DNS entries, and fall
back to the static example configuration if this fail.
* Let sssd suggest libnss-sss and libpam-sss, to make those
installing sssd aware of the other packages.
* Add netgroup to nsswitch.conf entries added at first time
installation, to make sure those installing now get working
netgroups when sssd get netgroup support
* Let sssd recommend ldap-utils as ldapsearch is used for generating
the configuration.
-- Petter Reinholdtsen <pere@debian.org> Fri, 06 Aug 2010 23:44:26 +0200
sssd (1.2.1-1) unstable; urgency=low
[ Petter Reinholdtsen ]
* Move calls to pam-auth-update from the package scripts in sssd to
libpam-sss, and correct prerm call to remove the correct pam config.
Add versioned dependency on libpam-runtime to make sure
pam-auth-update is available.
* Add code to the postinst and postrm of libnss-sss to update
passwd, group and shadow entries in /etc/nsswitch.conf.
* Make sure init.d/sssd start after $named, to ensure it can look up
in DNS also when the DNS server is on the local machine.
[ Morten Werner Forsbring ]
* New upstream release.
-- Morten Werner Forsbring <werner@debian.org> Thu, 24 Jun 2010 14:16:30 +0200
sssd (1.2.0-1) unstable; urgency=low
[ Petter Reinholdtsen ]
* New upstream release.
- Add libsemanage1-dev as build dependency, as it is now required.
- Drop python-build-with-deb-layout.dpatch, now handled upstream.
- Adjust provide-default-working-sssd-config-file.dpatch to
work with new package source layout and config file content.
- Adjust build rules to cope with server/ changing to src/ in the
source tarball.
- Add --enable-krb5-locator-plugin to keep building the plugin.
* Change the pam-auth-update configuration to make the session
script optional instead of sufficient, to make sure the other
session modules are executed too.
* Change initial pam password entry from requisite to sufficient,
to make sure local users can have their password set even if
sssd is enabled.
* Rename pam-configs/sssd to pam-configs/sss, to have a name that
is consistent with the package name libpam-sss.
* Add VCS links to the GIT repository.
* Move configuration API documentation from /etc/sssd/ to
/usr/share/doc/sssd/. It is not configuration and do not belong
in /etc/.
* Drop autoconf, automake, libtool, m4 and autotools-dev from
build-depends. There is no need to regenerate the build files any
more.
[ Morten Werner Forsbring ]
* Add dnsutils as build-dependency.
-- Morten Werner Forsbring <werner@debian.org> Tue, 01 Jun 2010 20:41:59 +0200
sssd (1.0.5-1) unstable; urgency=low
* Initial upload based on package from Ubuntu (Closes: #579593).
* Update standards-version from 3.8.3 to 3.8.4. No changes needed.
* Add init.d script and rename sssd.upstart to sssd.upstart.ubuntu
to make sure init.d script is installed instead of upstart job.
* Add draft pam-auth-update configuration based on proposals in
Launcepad bug #557398.
* Update address to FSF in copyright file. Thanks lintian.
* Set section for python-sss to python after advice from lintian.
* Rewrite python-build-with-deb-layout.dpatch to patch Makefile.in
instead of Makefile.am, to avoid having to run autoreconf.
* Make sssd depend on python for its upgrade script.
* Extend clean rule to remove generated file server/config/.files.
* Make sure sssd.api.conf is installed into the sssd package, and
put it in /etc/sssd/sssd.api.conf. Fixes typo in Ubuntu package.
-- Petter Reinholdtsen <pere@debian.org> Wed, 05 May 2010 21:53:29 +0200
sssd (1.0.5-0ubuntu1) lucid; urgency=low
* New upstream bugfix release. (LP: #510290)
* sssd.dirs: Add /var/lib/sss/pubconf (LP: #557394)
-- Timo Aaltonen <tjaalton@ubuntu.com> Fri, 16 Apr 2010 11:37:16 +0300
sssd (1.0.2-0ubuntu2) lucid; urgency=low
* No change rebuild due to libldb downgrade
-- Scott Kitterman <scott@kitterman.com> Fri, 02 Apr 2010 17:48:19 -0400
sssd (1.0.2-0ubuntu1) lucid; urgency=low
* New upstream release (LP: #473262):
- python API for managing sssd daemon configuration and
native SSSD users.
- support for asynchronous cache refreshes.
- support password changing in LDAP and Kerberos providers.
- support for server failover.
* debian/control:
- update tdb build dependency to use libtdb-dev.
- add libselinux1-dev and libsasl2-dev build dependencies.
* debian/sssd.upstart: replace init script with an upstart job.
* Turn sssd.conf into a configuration file.
* Create sssd log directory.
-- Mathias Gug <mathiaz@ubuntu.com> Tue, 19 Jan 2010 15:17:13 -0500
sssd (0.5.0-0ubuntu2) karmic; urgency=low
* debian/libnss-sss.overrides, debian/sssd.overrides:
+ Fix linitian errors and warnings (LP: #425697):
sssd ships an nss library - these are false-positives.
* debian/fix-dbus-watch.dpatch: Update dbus-patch to final
upstream version.
* debian/fix-proxy-segfault.dpatch: Fix proxy enumeration.
-- Mathias Gug <mathiaz@ubuntu.com> Wed, 09 Sep 2009 20:21:04 -0400
sssd (0.5.0-0ubuntu1) karmic; urgency=low
* Initial release.
-- Mathias Gug <mathiaz@ubuntu.com> Mon, 24 Aug 2009 16:35:11 -0400