system-config-printer (1.5.9-1) experimental; urgency=medium * New upstream release. - Drop debian/patches/0008-fix-device-sorting.patch, debian/patches/0009-fix-udev-add-printer-shbang.patch: Merged upstream - debian/patches/0007-fix-pk-package-name.patch: Refreshed * Switch to dh sequences from cdbs * Do not install smburi.py and debug.py in python3-cupshelpers anymore, this doesn't seem needed anymore * Bump debhelper compatibility to version 10 * Drop debian/patches/03_install_layout.patch, this doesn't seem needed anymore and adjust debian/python3-cupshelpers.install * debian/control.in: Add gir1.2-polkit-1.0 to the dependencies -- Laurent Bigonville Thu, 23 Feb 2017 22:26:58 +0100 system-config-printer (1.5.7-3) unstable; urgency=medium * debian/patches/0010-no-start-printer-applet-gnome.patch: Do not start the printer-applet in GNOME or Cinnamon {gnome,cinnamon}-settings-daemon is already taking care of this. * debian/rules: Move the definition of DEB_PYTHON3_MODULE_PACKAGES before including python-module.mk otherwise cdbs is not calling dh_python3 as expected -- Laurent Bigonville Thu, 23 Feb 2017 17:55:32 +0100 system-config-printer (1.5.7-2) unstable; urgency=medium * Move part of system-config-printer to system-config-printer-common package, gnome-control-center only needs a subset of system-config-printer * debian/control.in: s/gnome-packagekit-session/gnome-software, the former is a transitional package * debian/control.in: Bump Standards-Version to 3.9.8 (no further changes) * Drop debian/gpk-install-package-name, this doesn't seem needed anymore * Drop adwaita-icon-theme dependency, try to avoid individual packages to depend against themes. * Add debian/patches/0008-fix-device-sorting.patch: Fix sorting of devices, taken from upstream * Drop debian/patches/0002-Disable-firewall-checks.patch: firewalld is available in Debian as well, let's integrate with it. * Add debian/patches/0009-fix-udev-add-printer-shbang.patch: Fix incorrect python3 invocation, taken from upstream (Closes: #823472) -- Laurent Bigonville Thu, 02 Jun 2016 11:16:46 +0200 system-config-printer (1.5.7-1) unstable; urgency=medium * New upstream release. * Add Tim Waugh's public key to debian/upstream/signing-key.asc and tell uscan to check the tarball signatures. * Drop 0001-Adjust-python-paths.patch, not needed as all Python source files are installed into the same directory. * Refresh other patches via quilt. * Rename python-cupshelpers to python3-cupshelpers, following upstream switch to Python 3. * debian/control: - Replace python-* with python3-*. - Replace python-pycurl with python3-requests. - Replace gnome-icon-theme with adwaita-icon-theme. - Drop ancient hal-cups-utils conflicts, that package is not even in oldoldstable (aka squeeze). - Remove trailing whitespace from package descriptions. * Add 03_install_layout.patch to install cupshelpers Python module to correct location (copied from Ubuntu). * debian/gpk-install-package-name: - Update to make it work with Python 3. - Minor refactorings. * Rewrite debian/copyright using 1.0 format. * Bump debhelper compatibility level to 9. * No-op wrap and sort. -- Dmitry Shachnev Fri, 18 Sep 2015 12:12:29 +0300 system-config-printer (1.4.8-1) unstable; urgency=medium [ Andreas Henriksson ] * New upstream release. - Fixes TypeError when trying to change printer properties (closes: #791705) * Drop patches obsoleted by upstream changes: - 0003-Use-our-custom-cpk-install-package-name.patch - 0008-return-exception-rather-than-looping.patch * Refresh patches via quilt * Fix package description spelling error caught by lintian - Insert 'one' in ... allow one to... [ Dmitry Shachnev ] * Drop python-gobject-2 dependency, no longer needed. * Build-depend on python, instead of unneeded python-all-dev. -- Dmitry Shachnev Tue, 15 Sep 2015 15:11:44 +0300 system-config-printer (1.4.6-1) unstable; urgency=medium [ Dmitry Shachnev ] * Drop obsolete python-gnomekeyring Suggests, the package has been ported to use GnomeKeyring via introspection. [ Laurent Bigonville ] * New upstream release (Closes: #744869) * debian/control.in: Bump Standards-Version to 3.9.6 (no further changes) * debian/rules: Pass --with-udevdir to the configure, to install the udev helpers and config files to the proper directory * debian/system-config-printer-udev.install: The udev helpers and the config files are now installed in the proper directory * d/p/0003-Use-our-custom-cpk-install-package-name.patch, d/p/0006-use-paper-size-default-in-etc-papersize.patch: Refreshed * Drop d/p/0005-Fix-French-translation.patch, d/p/0007-scp-dbus-service-fix-dbus-signature-typo.patch: Merged upstream * Drop debian/patches/0008-fix-udevhelperdir.patch: The path is expanded properly * Add debian/patches/0007-fix-pk-package-name.patch: Fix the package names that PackageKit should try to install * debian/system-config-printer.install: Install appdata file * d/p/0008-return-exception-rather-than-looping.patch: This patch should fix the infinite loop creating million of symlinks in /tmp (Closes: #764253) * debian/control.in: Suggest gnome-packagekit-session instead of sessioninstaller (Closes: #623013) -- Laurent Bigonville Thu, 23 Oct 2014 01:29:14 +0200 system-config-printer (1.4.3-4) unstable; urgency=medium * d/p/0008-fix-udevhelperdir.patch: Use the debian location for udev-configure-printer -- Laurent Bigonville Tue, 25 Feb 2014 01:52:27 +0100 system-config-printer (1.4.3-3) unstable; urgency=medium * debian/rules: Pass --list-missing to dh_install * debian/rules, debian/system-config-printer-udev.install: Install systemd configure-printer@.service file (Closes: #739964) -- Laurent Bigonville Tue, 25 Feb 2014 00:03:14 +0100 system-config-printer (1.4.3-2) unstable; urgency=medium * debian/control.in: - Add dependency against python-gobject-2 and python-cairo (Closes: #730516) - Bump Standards-Version to 3.9.5 (no further changes) -- Laurent Bigonville Mon, 24 Feb 2014 00:34:18 +0100 system-config-printer (1.4.3-1) unstable; urgency=low * New upstream release (Closes: #727556) - Fix some Unicode-related issues (Closes: #718263, #725882) * d/p/0006-use-paper-size-default-in-etc-papersize.patch: Detect paper size using /etc/papersize if it's available, thanks to the Ubuntu guys (Closes: #593219) * d/p/0007-scp-dbus-service-fix-dbus-signature-typo.patch: Fix typo in a D-Bus method signature (Taken from Ubuntu, thanks) -- Laurent Bigonville Sat, 26 Oct 2013 14:58:35 +0200 system-config-printer (1.4.1-4) unstable; urgency=low * Switch from pysupport to dh_python2 * debian/control.in: Add python-gi to the dependencies (Closes: #717153) -- Laurent Bigonville Mon, 16 Sep 2013 08:38:32 +0200 system-config-printer (1.4.1-3) unstable; urgency=low [ Laurent Bigonville ] * debian/control.in: Bump python-smbc to Recommends (Closes: #611303) [ Emilio Pozuelo Monfort ] * debian/system-config-printer.maintscript: + Tell dpkg about the new conffile names. Closes: #711633. * debian/control.in: + Bump Standards-Version to 3.9.4, no changes needed. + Build depend on autotools-dev to get updated config.{sub,guess}. -- Emilio Pozuelo Monfort Mon, 10 Jun 2013 16:02:14 +0200 system-config-printer (1.4.1-2) unstable; urgency=low * Upload to unstable. -- Emilio Pozuelo Monfort Sat, 25 May 2013 15:58:31 +0200 system-config-printer (1.4.1-1) experimental; urgency=low [ Emilio Pozuelo Monfort ] * Change the maintainer to the GNOME team. Thanks Otavio for all your work! [ Jordi Mallach ] * Don't search for .bz2 tarballs, only .xz is supported. * Fix get-orig-source by using more gnome-get-source.mk variables to build the download URL. * Remove obsolete postinst script. * Bump debhelper compatibility to 8. * Remove debian/tmp prefix from .install files. * Update Vcs-* fields to non-redirected URLs. [ Josselin Mouette ] * Update repository URL. [ Emilio Pozuelo Monfort ] * New upstream release. + Doesn't use deprecated udev functions. Closes: #705521. + debian/control.in: - Update build dependencies. - Update dependencies for the GI migration. - Bump python-cups dependency to 1.9.60. + debian/install: - Renamed to debian/system-config-printer.install. + debian/rules, debian/system-config-printer.install: - Remove various hacks in debian/rules and just install the upstream script to run system-config-printer{,-applet}. + debian/rules: - Remove debug.py instead of options.py as that's what we're copying. + debian/system-config-printer.install: - Install the dbus service files and the necessary binaries. Closes: #705414. + debian/patches/0004-Fix-MITM-via-unencrypted-metadata-download.patch: - Removed, included upstream. + debian/patches/*: - Refreshed. * Upload to experimental until the python-cups dependency can be satisfied in unstable. -- Emilio Pozuelo Monfort Sat, 25 May 2013 14:00:55 +0200 system-config-printer (1.3.7-4) unstable; urgency=low * debian/control.in: Add missing Depends against python-dbus (Closes: #627810) * debian/python-cupshelpers.install: Install missing /etc/cupshelpers/preferreddrivers.xml file (Closes: #695582) * debian/patches/0005-Fix-French-translation.patch: Fix confusing French translation (Closes: #615113) -- Laurent Bigonville Fri, 25 Jan 2013 21:53:18 +0100 system-config-printer (1.3.7-3) unstable; urgency=low * Upload to unstable * Bump standards version to 3.9.2. No source changes. * Remove now superfulous '/usr/bin/env' removal. Upstream removed this already. * Adjust download URL -- Guido Günther Thu, 22 Dec 2011 19:46:52 +0100 system-config-printer (1.3.7-2) experimental; urgency=low * Add pycurl dependency to control.in too. Thanks; Michael Biebl (Closes: #652387) -- Guido Günther Sat, 17 Dec 2011 12:56:42 +0100 system-config-printer (1.3.7-1) experimental; urgency=low * New upstream version 1.3.7 (Closes: #642211) * Update watch file. Upstream uses xz now (Closes: #646320) * Drop superfluous patches. 0003-Adjust-package-names.patch 0004-Fix-blacklist-name.patch 0005-Revert-to-the-correct-menu-category.patch 0006-Don-t-blindly-listen-to-any-signal.patch * configure: Enable installation of udev rule * Fix MITM via unencrypted metadata download (CVE-2011-4405). Patch taken from Ubuntu. Thanks to Till Kamppeter -- Guido Günther Tue, 13 Dec 2011 20:57:36 +0100 system-config-printer (1.2.3-3) unstable; urgency=high * Depend on libxml2 (Closes: #597723) * Make system-config-printer conflict on hal-cups-utils to help lenny->>squeeze updates. Otherwise hal-cups-utils won't get removed. See http://lists.debian.org/debian-release/2010/09/msg00923.html for a discussion. -- Guido Günther Tue, 28 Sep 2010 10:48:07 +0200 system-config-printer (1.2.3-2) unstable; urgency=low * python-cupshelpers: Don't Break and Replace python-cupsutils since we don't share any files and this eases upgrades via apt-get. -- Guido Günther Sun, 12 Sep 2010 17:42:18 +0200 system-config-printer (1.2.3-1) unstable; urgency=medium [ Guido Günther ] * Add Vcs-{Svn,Browser} and Homepage URLs * Add myself to uploaders * pyversions, control.in: require python 2.6 (Closes: #594901) [ Josselin Mouette ] * pyversions, control.in: require python 2.5. Closes: #594402. -- Guido Günther Tue, 31 Aug 2010 13:25:48 +0200 system-config-printer (1.2.3-0.3) unstable; urgency=low * Non-maintainer upload. * Upload to unstable. -- Guido Günther Fri, 20 Aug 2010 17:49:59 +0200 system-config-printer (1.2.3-0.2) experimental; urgency=low * Non-maintainer upload. * Install debug.py and smburi.py in the cupshelpers package (Closes: #525714) -- Guido Günther Fri, 13 Aug 2010 20:29:23 +0200 system-config-printer (1.2.3-0.1) experimental; urgency=low * Non-maintainer upload. * New Upstream version 1.2.3 (Closes: #49333) - No deprecation warnings (Closes: #574636) - Uses udev instead of hal (Closes: #568477, #581511) - uses PolicyKit (Closes: #499284) * Conflict on hal-cups-utils since system-config-printer-udev provides this functionality now. * Use cups-pk-helper instead of gksu (Closes: #469587, #479829) * Move package to section gnome. (Closes: #590571) * Rename python-cupsutils to python-cupshelpers * Switch to 3.0 (quilt) format * Bump standard version to 3.9.1 * New patches: - 0002-Disable-firewall-checks.patch. Disable RH specific firewall checks - 0003-Adjust-package-names.patch. Adjust package names to match the Debian ones - 0004-Fix-blacklist-name.patch. Fix blacklist name - 0007-Use-our-custom-cpk-install-package-name.patch use packagekit when available * Updated patches: - 0001-Adjust-python-paths.patch 0005-Revert-to-the-correct-menu-category.patch 0006-Don-t-blindly-listen-to-any-signal.patch * Dropped pachtes: - 01_no_rhpl: fixed upstream. - 02_translations: upstream translation updates seem to include these - 03_elementtree: not needed anymore. - 04_jobsheets_traceback.patch: fixed upstream - 08_stock_icons.patch: fixed upstream - 11_use_gksu.patch: gksu replaced by PolicyKit - 12_remove_redhat: fixed upstream. - 15_close_shortcut.patch: close is more consistent with other applets - 17_new_printer_notification.patch: fixed upstream, applet gets the new printer notifications - 19_dbus_interfaces.patch: fixed upstream - 31_browse_hang: code changed - 32_pycups_traceback.patch: fixed upstream - 30_install_traceback.patch: fixed upstream - 33_dont_strip_Printer.patch: code changed -- Guido Günther Wed, 28 Jul 2010 12:22:57 +0200 system-config-printer (1.0.0-6) unstable; urgency=low * The “We’ll deal with the rest later” release. * Move smburi.py to python-cupsutils. * This allows system-config-printer-kde to not depend on system-config-printer. Closes: #525714. * Update 13_python_paths.patch accordingly. -- Josselin Mouette Wed, 17 Jun 2009 10:50:17 +0200 system-config-printer (1.0.0-5) unstable; urgency=low [ Loic Minier ] * Don't purge /etc/xdg/autostart/redhat-print-applet.desktop during first installation. [ Josselin Mouette ] * 19_dbus_interfaces.patch: remove redundant send_interface lines in the dbus configuration file. Closes: #510756. * 02_translations.patch: new Romanian translation from Eddy Petrișor. Closes: #519217. * Standards version is 3.8.1. -- Josselin Mouette Wed, 01 Apr 2009 13:20:11 +0200 system-config-printer (1.0.0-4) unstable; urgency=low * Require desktop-file-utils 0.13. Closes: #499382, thanks Tom Parker. * Depend on gnome-icon-theme. Closes: #506282. -- Josselin Mouette Thu, 20 Nov 2008 09:49:02 +0100 system-config-printer (1.0.0-3) unstable; urgency=low * 02_translations.patch: + Updated Catalan translation by David Planella. Closes: #494092. + Updated Finnish translation by Esko Arajärvi. Closes: #498106. * 04_jobsheets_traceback.patch: new patch. Don't send None to setPrinterJobSheets, send "none" instead. Don't send anything if nothing was selected. Closes: #486941, #486580. * Standards version is 3.8.0, no changes. -- Josselin Mouette Fri, 12 Sep 2008 17:50:55 +0200 system-config-printer (1.0.0-2) unstable; urgency=low * Switch to quilt for patch management; build-depend on quilt. * Merge all translation updates in 02_translations.patch. * New translations: + Spanish (Javier Fernández-Sanguino Peña) + Vietnamese (Clytie Siddall) + Russian (Yuri Kozlov), closes: #485654 + German (Helge Kreutzmann), closes: #485982 + Basque (Piarres Beobide) + simplified Chinese (Deng Xiyue), closes: #486198 + Turkish (Mert Dirik). + Czech (Martin Šín), closes: #486379. * Recommend hal-cups-utils. * 15_close_shortcut.patch: use gtk-close instead of gtk-quit, so that the default shortcuts to close a window are used. * 16_dont_monitor_session.patch: don’t blindly listen to any signal that goes through the session bus. Gnome-session will know when to kill the applet. Closes: #486674, thanks Michal Čihař. * 17_new_printer_notification.patch: allow anyone to listen to the new printer notification dbus signal. Closes: #486613. * 18_debian_packages.patch: + List the correct Debian packages that provide the given programs. + Use gksu+synaptic to install the packages. + Launch gksu+s-c-p to configure the printers from the applet. * Install the new debutils.py file. * Recommend synaptic. * 13_python_paths.patch: also fix the shebangs. * 30_install_traceback.patch, 31_browse_hang.patch, 32_pycups_traceback.patch, 33_dont_strip_Printer.patch: stolen from upstream’s git tree. Fix a few crashers. * Upload to unstable; drop check-dist include. -- Josselin Mouette Sun, 22 Jun 2008 19:13:39 +0200 system-config-printer (1.0.0-1) experimental; urgency=low * New upstream release. * Update watch file and get-orig-source URL. * Target at experimental; include check-dist.mk. * 02_fr_po.patch: updated translations for the new version. * 04_de_po.patch: dropped, included upstream. * 05_vi_po.patch, 06_ru_po.patch, 07_es_po.patch: updated to apply cleanly. * 08_stock_icons.patch: update for the new version. * 12_remove_redhat.patch: added; remove redhat- from the .desktop names and X-RedHat-Base from the categories. * postinst: remove the old redhat-print-applet.desktop file. * Remove useless README.Debian. * Split utility modules in a python-cupsutils package, making them public. They will be used by hal-cups-utils. * Remove the wrapper scripts in /usr/bin, put the python scripts directly. * 13_python_paths.patch: new patch, modify python search paths and imports according to these changes. * 11_use_gksu.patch: disable startup notification, which is broken by gksu. -- Josselin Mouette Sun, 08 Jun 2008 13:18:20 +0200 system-config-printer (0.7.81-4) unstable; urgency=low * 07_es_po.patch: remove ISO8859 encoded text, leading to a crash when using a Spanish local. Closes: #484136. -- Josselin Mouette Wed, 04 Jun 2008 01:11:21 +0200 system-config-printer (0.7.81-3) unstable; urgency=low * 06_ru_po.patch: updated Russian translation by Yuri Kozlov. Closes: #467176. * 07_es_po.patch: updated Spanish translation by Javier Fernández-Sanguino Peña. Closes: #468580. * Drop dependency on python-xml. Closes: #468617. * pyversions: require python 2.4. * Depend on python-notify. Closes: #471943. * Depend on python-dbus. * Don't require python-elementtree when python version is >= 2.5. * 08_stock_icons.patch: use the "add" icon to add a printer, and the "new" icon to create a group, in both the toolbar and the menu. -- Josselin Mouette Mon, 21 Apr 2008 18:50:08 +0200 system-config-printer (0.7.81-2) unstable; urgency=low * 04_de_po.patch: updated German translation by Helge Kreutzmann. Closes: #466305. * 05_vi_po.patch: updated Vietnamese translation by Clytie Siddall. Closes: #466377. * Depend on python-gnome2. Closes: #467094. -- Josselin Mouette Sat, 23 Feb 2008 09:26:24 +0100 system-config-printer (0.7.81-1) unstable; urgency=low * Put the package under co-maintenance by the GNOME team, on maintainer’s request. * rules: use uploaders.mk and gnome-get-source.mk. * Build-depend on gnome-pkg-tools. * Require python-cups 1.9.27. Closes: #457702. * 10_menu_entries.patch: revert to the correct menu category. Closes: #460865. * New upstream release. + Removes .png extension in the desktop file. Closes: #461023. * 01_no_rhpl.patch: updated for new version. * Rework the package description. * Rename 10_menu_entries.patch into 10_show_manage_jobs.patch. * 11_use_gksu.patch: launch system-config-printer using gksu. Closes: #460864, #460215. * Depend on gksu. * 02_fr_po.patch: fix French translation. Closes: #460861. * Depend on python-elementtree. * 03_elementtree.patch: support elementtree.ElementTree for pre-2.5 python versions. -- Josselin Mouette Sun, 17 Feb 2008 10:51:09 +0100 system-config-printer (0.7.78-1) unstable; urgency=low * Imported upstream version 0.7.78. Closes: #451808, #445245 * Bump standards-version to 3.7.3 (no changes needed) * Use gettext instead of rhpl (taken from Ubuntu package) * Change menu entries (taken from Ubuntu package) * Remove makefile patch since it not needed anymore -- Otavio Salvador Sun, 16 Dec 2007 00:15:42 -0200 system-config-printer (0.7.71-1) unstable; urgency=low * New Upstream Version -- Otavio Salvador Fri, 03 Aug 2007 21:54:29 -0300 system-config-printer (0.7.70-2) unstable; urgency=low * Add xmlto to Build-Depends. Closes: #433746 -- Otavio Salvador Sun, 29 Jul 2007 21:30:37 -0300 system-config-printer (0.7.70-1) unstable; urgency=low * New Upstream Version -- Otavio Salvador Sun, 15 Jul 2007 20:47:12 -0300 system-config-printer (0.7.69-1) unstable; urgency=low * New Upstream Version * debian/watch: Use git-import-orig instead of uupdate so it integrates better with our git repository. * debian/rules: Drop the code to fix the executable permissions on /usr/share since it's being done properly on upstream tarball. -- Otavio Salvador Wed, 04 Jul 2007 12:42:36 -0300 system-config-printer (0.7.66-1) unstable; urgency=low [ This package has been done using 0.7.62-0ubuntu1 sources as base. Thanks to Jani Monoses by his work on it ] * debian/copyright: Update download URI. * debian/watch: Add to allow easier upgrade of package version. * debian/control: Remove versioned dependency of python-cups. * debian/rules, debian/control: Move from python-central to python-support. * debian/rules: Fix, by hard, wrong executable permissions on /usr/share. -- Otavio Salvador Wed, 04 Jul 2007 12:33:01 -0300