This documents udev integration Debian specifics. Please see man udev(7) and its referenced manpages for general documentation. Network interface naming ~~~~~~~~~~~~~~~~~~~~~~~~ Since version 197 udev has a builtin persistent name generator which checks firmware/BIOS provided index numbers or slot names (similar to biosdevname), falls back to slot names (PCI numbers, etc., in the spirit of /dev/disks/by-path/), and then optionally falls back to MAC address, and generates names based on these properties. This provides "location oriented" names for PCI cards such as "enp0s1" for ethernet, or wlp1s0" for a WIFI card so that replacing a broken network card does not change the name. As location based naming does not work well for USB devices, these use a MAC based naming schema (see /lib/udev/rules.d/73-usb-net-by-mac.rules). This has been enabled by default since udev 220-7, which affects new installations/hardware. Existing installations/hardware which already got covered by the old 75-persistent-net-generator.rules will keep their interface names, see below. You can disable these stable names and go back to the kernel-provided ones (which don't have a stable order) in one of two ways: - Put "net.ifnames=0" into the kernel command line (e. g. in /etc/default/grub's GRUB_CMDLINE_LINUX_DEFAULT, then run "update-grub"). - Disable the default *.link rules with "ln -s /dev/null /etc/systemd/network/99-default.link" and rebuild the initrd with "update-initramfs -u". See this page for more information: http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ Legacy persistent network interface naming ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Debian releases up to 8 ("Jessie") and Ubuntu up to 15.04 had an udev rule /lib/udev/rules.d/75-persistent-net-generator.rules which fixed the name of a network interface that it got when its MAC address first appeared in a dynamically created /etc/udev/rules.d/70-persistent-net.rules file. This had inherent race conditions (which sometimes caused collisions and interface names like "rename1"), required having to write state into /etc (which isn't possible for read-only root), and did not work in virtualized environments. This old schema is deprecated in Debian 9 ("Stretch"), and will not be supported any more in Debian 10. Migration to the current network interface naming ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On package upgrade systems will keep their current names, but they will need to be manually migrated by Debian 10 / Ubuntu 18.04 LTS. If you rely on the old names in custom ifupdown stanzas, firewall scripts or other networking configuration, these need to be updated to the new names. First, determine all relevant network interface names: those in /etc/udev/rules.d/70-persistent-net.rules, or if that does not exist (in virtual machines), in "ip link" or /sys/class/net/. Then for every interface name use a command like grep -r eth0 /etc to find out where it is being used. Then on "real hardware" machines, rename the file to 70-persistent-net.rules.old; on VMs remove the file /etc/udev/rules.d/80-net-setup-link.rules instead. Reboot, adjust configuration files, and test your system. Custom net interface naming ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In some cases it is convenient to define your own specific names for network interfaces. These can be customized in two different ways: * You can create your own names via udev rules, based on arbitrary attribute and property matches. See man udev(7) for documentation how to write udev rules. For example, you can create /etc/udev/rules.d/76-netnames.rules with ------------ snip ---------- # identify device by MAC address SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="11:22:aa:bb:cc:33", NAME="eth-dmz" # identify by vendor/model ID SUBSYSTEM=="net", ACTION=="add", ENV{ID_VENDOR_ID}=="0x8086", \ ENV{ID_MODEL_ID}=="0x1502", NAME="eth-intel-gb" # USB device by path # get ID_PATH if not present yet ENV{ID_PATH}=="", IMPORT{builtin}="path_id" SUBSYSTEM=="net", ACTION=="add", ENV{ID_PATH}=="*-usb-0:3:1*", NAME="eth-blue-hub" ------------ snip ---------- The name of the rules file needs to have a prefix smaller than "80" so that it runs before /lib/udev/rules.d/80-net-setup-link.rules, and should have a prefix bigger than "75" so that it runs after 75-net-description.rules and thus you can use matches on ID_VENDOR and similar properties. * Unless you disabled net.ifnames, you can change the policy (kernel/bios/path/MAC based naming) in an /etc/systemd/network/*.link file, for individual devices or entire device classes. See man systemd.link(5) for details about this. /lib/systemd/network/99-default.link is the default policy, and /lib/systemd/network/01-mac-for-usb.link makes it use MAC based names for USB devices. Any of the above changes require an initrd update with "update-initramfs -u" to get effective. Using udev with LDAP or NIS ~~~~~~~~~~~~~~~~~~~~~~~~~~~ If the rules files reference usernames or groups not present in the /etc/{passwd,group} files and the system is configured to use a network-based database like LDAP or NIS then udev may fail at boot time because users and groups are looked up well before the network has been initialized. A possible solution is to configure /etc/nsswitch.conf like this: passwd: files ldap [UNAVAIL=return] group: files ldap [UNAVAIL=return] The nsswitch.conf syntax is documented in the glibc manual.