uhd (4.7.0.0+ds1-1) experimental; urgency=medium * New upstream release * Upload to experimental for soversion bump. -- A. Maitland Bottoms Wed, 10 Jul 2024 22:15:13 -0400 uhd (4.7.0.0~0ubuntu1) UNRELEASED; urgency=low * Highlights / Main Changes - Major updates to rfnoc_image_builder (a98ce26). This change adds support for defining transport adapters in the image builder YAML files, adding custom modules, and more. - Updated embedded OS on file system images for E3xx, N3xx, and X4xx devices to Yocto 4.0 (kirkstone). * New Features - General - Allow installing only Python-based utilities (e.g., rfnoc_image_builder) by adding the ENABLE_PYMOD_UTILS option to CMake. - Added ability to query dot representation of RFNoC graph - Python support - Added DRAMReceiver class and amend rx_to_file.py example to use new class. This supplements the DRAMTransmitter class and simplifies using the DRAM-backed RFNoC replay block to when signal bandwidth exceeds available streaming bandwidth. - CMake - We now search for a system version of Pybind11 before falling back to the bundled version. The system version is preferred, and the bundled version may be removed in a future release. - RFNoC - Image builder: Major update, which adds support for defining transport adapters in the image builder YAML files, adding custom modules, choosing custom directories for build, IP, and intermediate files, building IP only, saving Vivado projects, and more. Image core YAML files created with this version are not compatible with previous versions, and vice versa! Also adds many more checks to avoid building bitfiles that are either incomplete, or valid but probably not the desired outcome. - Added support for defining custom register spaces in RFNoC blocks. - Added license checking subsystem. This allows creating RFNoC blocks that require a license key to operate. - Add device DNA feature for X310, X410, X440. This allows reading back the FPGA's DNA, which is a unique identifier. - Embedded OS for E3xx, N3xx, and X4xx devices - With the switch to Yocto 4.0 (kirkstone), the SD card and eMMC images no longer pre-populate the second system partition. Refer to the device specific "Updating Filesystems" section in the user manual for how to populate it. This reduces the size of compressed .sdimg filesystem images. - X440 - Added new guided log info mode to provide more information about the Nyquist zone in which the chosen frequency is located. These additional info logs are enabled by default. For disabling the guided mode, add the entry `guided_mode=false` to the UHD config file in the "Global" section. - Examples - rfnoc-example now also generates Python bindings for OOT block control functions. * Dependencies changes - Increase minimum required version - Python to 3.7.0 - Pybind11 to 2.7.0 * Bug Fixes - General UHD - Fix issue with undefined HOME or XDG_CONFIG_HOME - Fix compilation error with boost 1.85.0 (closed issue 740) - Fixed cmake find_library for UHD to fail if the library is not found - Fixed setters for ALL_CHANS in multi_usrp - Demoted safe call logging to warning - Fixed outstanding clang-format issues - Fixed compiling with gcc 13.2 - Removed superfluous usage of const in return values - Python support - YAML files are now listed as part of the package - Fix setting start_time having no effect - RFNoC - Add EOB to source port of null_src_sink block - Fix RFNoC graph action queue lockup on action exceptions - FIR filters now uses newer IP revisions - Reverse FIR filter coefficients now get embedded in DSPE48 - B2xx - Fixed FRAC2 calculation (closed issue 684). - Fix DC truncation bias by adding rounding to DDC chain - X310 - Fix warning about duplicate reg - ubx - update ubx xcvr mode options - write output power to correct LO - Fix width of gain register - MPM - Deactivate explicit DAD (Duplicate Address Detection) on int0 interface since this is the default behavior of systemd v250.5 (Yocto release kirkstone) for static IPv4 addresses if the IP address is a link local address. - Correct outdated mender command in prints of usrp_update_fs utility - No longer import from from rpc_server when already importing usrp_mpm - Demoted log level of ECHO send error - No longer print iptables errors when setting up forwarding - X400 Platform - Add PPS interface to X410/X440 BSP - Add netlist make flow - Update PS DRAM speed bin - Replace Ethernet transport adapter - X410 - Set Locale for ZBX Lattice build - Improve Lattice make flow - X440 - Fix error in master clock table for 1000MHz mcr. - Place SPI into IOB on X440 - mpm - Add error for recurring TA node inst values - Fix warning about different converter rates - Fix MTS skip for dual-rate - Use greatest converter rate for sysref rate - Add warning for bad conv rate order - Enable multiple LMK VCO rates per MCR - Examples - Fix rx_samples_to_file failure for multichannel fullpath. - Fixed bugs observing cmd argument -c in remote_rx.py example. - Updated tx_waveforms examples now also use timed commands during frequency tuning for all devices except for x410. On X440 this allows reproducing specified channel to channel phase alignments. - Consistently comment out sections in rx_samples_to_file. * Validated OS Environments (Versions for build and runtime dependencies can be determined from the docker container definitions in the UHD repository at .ci/docker/...) - Linux: - Ubuntu: bionic (18.04), focal (20.04), jammy (22.04), noble (24.04) - Fedora: 34, 35, 36 - Windows: 10 21H2, 11 21H2 - MacOS: Monterey (12.6) -- Ettus Research Fri, 28 Jun 2024 03:18:38 -0800 uhd (4.6.0.0+ds1-6) unstable; urgency=medium * Fixup conflict replaces (Closes: #1063324, #1063085) -- A. Maitland Bottoms Thu, 18 Apr 2024 23:25:00 -0400 uhd (4.6.0.0+ds1-5.1) unstable; urgency=medium * Non-maintainer upload. * Rename libraries for 64-bit time_t transition. Closes: #1063085 -- Steve Langasek Wed, 28 Feb 2024 20:10:38 +0000 uhd (4.6.0.0+ds1-5) unstable; urgency=medium * install utilities on hurd * include upstream metadata -- A. Maitland Bottoms Fri, 15 Dec 2023 22:34:58 -0500 uhd (4.6.0.0+ds1-4) unstable; urgency=medium [ Christian Ehrhardt ] * d/p/adapt-to-dpdk-23.11.patch: fix build with new DPDK 23.11 (Closes: #1057200) [ A. Maitland Bottoms ] * no tests defined, remove TestSuite: -- A. Maitland Bottoms Sun, 03 Dec 2023 21:45:35 -0500 uhd (4.6.0.0+ds1-3) unstable; urgency=medium * Adjust autopkgtest settings -- A. Maitland Bottoms Sun, 26 Nov 2023 15:13:20 -0500 uhd (4.6.0.0+ds1-2) unstable; urgency=medium * Upload to unstable * Enable PDF documentation -- A. Maitland Bottoms Thu, 23 Nov 2023 20:45:40 -0500 uhd (4.6.0.0+ds1-1) experimental; urgency=medium * New upstream release * Upload to experimental for soversion bump. * improve debian/rules clean target (Closes: #1047319, #1049838) -- A. Maitland Bottoms Wed, 22 Nov 2023 00:13:03 -0500 uhd (4.6.0.0-0~0ubuntu1) UNRELEASED; urgency=low * ci - only build docker images once per week - propagate testLength to RF ATS - replace deprecated ruamel.yaml methods - use build farm for windows builds * cmake - Fix make_x410 and make_x440 targets * deb - copyright file update to eliminate errors and warnings * docs - X440: Add FBX to daughterboard list - X440: Corrected web link syntax in FBX doc. - x440: Add X440_X4_200 to image flavors - Add dual-rate documentation * examples - L band capture example using dual rate * fpga - ci: Add X440_X4_200 to pipelines - lib: Allow buffering in eth_ipv4_chdr_adapter - n3xx: Add CE clock - rfnoc: Add clock info to backend ifc - rfnoc: radio: Add clock index parameters - tools: Add X440_X4_200 to X440 package - x400: Add CE clock - x400: Add X440 200 MHz variant with DDC/DUC - x400: Split DRAM interface into two banks - x400: Update PL DRAM speed bin - x400: bump minor revision - x400: pps_sync cleanup - x400: propagate pps_sync changes - x400: update signals to run on two domains - x440: cpld: led control cleanup - x440: remove extra synchronizer * images - bump x4xx fpga images - update non-x4xx images * lib - rfnoc: Add clock info fields to client zero - rfnoc: Add support for auto-clock discovery - x4xx: Use auto clock ID in x400_radio_control * mpm - x440: Add lookup table for default MCR per DSP bandwidth - x440: Multi-Tile Sync disabled when using dual rate - x400: Align FPGA revision - x400: match HDL PPS updates - x400: make PRC a multiple of both rfdc rates - fix timekeeper misalignment * multi_usrp - Added module_serial to info * rfnoc - Enable SEP throttle register - image builder: Add clock index support to image builder * utils - init device with gpsdo sources in query_gpsdo_sensors * x4xx - Add support for auto clock ID - FPGA designs now use a replay block per utilized DRAM bank * x440 - Add support for using radio block specific master clock rates - X4_440 and X4_1600 fpga image now contain 2 replay blocks (number of ports per replay block halved compared to previous release) -- Ettus Research Sun, 12 Nov 2023 02:44:06 -0800 uhd (4.5.0.0+ds1-3) unstable; urgency=medium * update udev rules add support for the B205 mini device -- A. Maitland Bottoms Fri, 06 Oct 2023 16:10:20 -0400 uhd (4.5.0.0+ds1-2) unstable; urgency=medium * Upload to unstable -- A. Maitland Bottoms Mon, 02 Oct 2023 20:54:26 -0400 uhd (4.5.0.0+ds1-1) experimental; urgency=medium * New upstream release * not building Doxygen output refman.pdf (Closes: #1052896) * upload to experimental for soversion bump -- A. Maitland Bottoms Sat, 30 Sep 2023 10:04:32 -0400 uhd (4.4.0.0+ds1-4) unstable; urgency=medium * Ensure build using --no-arch-any -- A. Maitland Bottoms Sun, 16 Jul 2023 14:22:15 -0400 uhd (4.4.0.0+ds1-3) unstable; urgency=medium * simplify debian/rules, clean up dpdk dependencies -- A. Maitland Bottoms Sun, 16 Jul 2023 08:29:56 -0400 uhd (4.4.0.0+ds1-2) unstable; urgency=medium * Upload to unstable * Build using GCC-13 (Closes: #1037877) -- A. Maitland Bottoms Thu, 13 Jul 2023 22:41:36 -0400 uhd (4.4.0.0+ds1-1) experimental; urgency=medium * New upstream release * upload to experimental for soversion bump * use xelatex and amsmath to cope with box-drawing unicode and pmatrix -- A. Maitland Bottoms Mon, 10 Jul 2023 19:04:42 -0400 uhd (4.4.0.0-0ubuntu1) ubuntu_release; urgency=low * Features - Raw UDP Traffic to Remote Destination for RFNoC-enabled devices * C API - Fix double-free issue with sensor values * ci - Add clang-format 14.0 to the Ubuntu 22.04 container - devtest: Test E320 1G FPGA Image - Filter uhd_find_devices checks by device type - increase timeout for x4xx hardware test job - Pull UHD version from UHDConfigVersion.cmake - Replace Rhombus E320 - Update docker repo location * cmake - fix UHDAtomics.cmake to read custom Boost install prefix - Fix build with GCC 13 (add missing include) * devtest - Add multi-spc timed command tests * docs - Fix typo in Python API dox file - Phase noise consideration when using external clock with E320 - rfnoc: Fix Doxygen warnings on chdr_packet::set_metadata() - Update manual for X3x0 raw UDP streaming * e320 - Allow internal GPSDO to be powered-down via UHD session args * e3xx - add support for power calibration api * examples - remote_rx: Add --mac-address argument - rx_samples_to_file: Add disk write speed check - rx_samples_to_file: Add multichannel option - Upgrade RFNoC example to Vivado 2021.1 * fpga - ci: Create local copy of patches to use - Cosmetic changes to rx_frontend_gen3_tb - docs: Fix AR76780 dependency - e320 Change MIG arbitration to RD_PRI_REG - Fix overflows in DDC - Fix overflows in quarterrate downconverter - Fix warnings in dds_freq_tune module - lib: Add align_samples module - lib: Add verilog-compatible wrapper for eth_ipv4_chdr_adapter - lib: Add ZPU support to SV transport adapter - lib: Fix indentation in setting_reg.v - lib: Fix inferred latch in ep_autonegotiation - lib: Support time and data updates in sim_radio_gen - lib: Update header for AXI4S add/remove bytes - Require AR76780 for X3xx and E3xx - Restore FIR filter in rx_frontend_gen3 - rfnoc: Add align_samples testbench - rfnoc: Add timed sample alignment to radio - rfnoc: Fix inferred latch in chdr_strip_header - sim: Fix typo in clk_wait_f - tools: Detect check_timing issues during build - tools: Fix error detection in run_testbenches.py - x300: Bump FPGA compat to 39.1 - x300: Change MIG arbitration to RD_PRI_REG - x300: Support advanced transport adapter * host - ADC cal: Add ability to set calibration mode explicitly - cal: Rearrange ADC self calibration routine * images - Update manifest - timed sample alignment in RFNoC * lib - Fix warning in ctrlport_endpoint.cpp - topo graph: Fix rule-of-3 related compiler warnings * mpm - Add a lock to the rpc server timer - Better error message for multiple assigned MACs - Fix rpc process shared state and port argument positions - Move parse_encoded_git_hash() to mpmutils - rfdc: Add X4xx 125e6 master clock rate - rpc server: Capture claim token value before releasing state lock - x4xx: Remove references to white rabbit * n3xx - Increase tune timeout * octoclock - Fix type of eeprom object in property_tree * rfnoc - Add logging to some throw statements - lsm: Improve logging/error messages - Move detection of TAs post-LSM-init - streamers: Fix scaling factor * tests - add ramdisk cfg option to streaming setup - add support for 10-100GB x410 raw udp - add x310 raw udp tests * uhd - Fix RfnocGraph pybind binding for get_tree - python: Bind {separate,combine}_device_addr{s} - python: Make DeviceAddr behave like dict - When separating device_addr_t, keep indexed values - Add xport_adapter_ctrl core * x300 - Enable use of advanced transport adapters - Respect X300_FW_COMMS_FLAGS_ARP_FAIL flag - Update firmware for TA control -- Ettus Research Fri, 27 Jan 2023 01:16:40 -0800 uhd (4.3.0.0~rc2+ds1-1) experimental; urgency=medium * New upstream pre-release * upload to experimental for new soversion and library package -- A. Maitland Bottoms Mon, 12 Sep 2022 22:18:41 -0400 uhd (4.2.0.0+ds1-3) unstable; urgency=medium * Re-enable python3-uhd on mipsel (Closes: 1014239) * Use versioned subdirectory for libuhd4.2.0-dpdk-tests (Closes: #1014260) -- A. Maitland Bottoms Wed, 06 Jul 2022 19:58:38 -0400 uhd (4.2.0.0+ds1-2) unstable; urgency=medium * Fix manpage installation for binary-any builds (Closes: #1014127) -- A. Maitland Bottoms Thu, 30 Jun 2022 17:00:07 -0400 uhd (4.2.0.0+ds1-1) unstable; urgency=medium * New upstream release * update watch file * use /usr/libexec/uhd for some executables -- A. Maitland Bottoms Thu, 30 Jun 2022 00:28:20 -0400 uhd (4.2.0.0+dfsg-1) experimental; urgency=medium * New upstream release * upload to experimental for soversion bump -- A. Maitland Bottoms Sat, 25 Jun 2022 20:19:05 -0400 uhd (4.2.0.0-1~ettus) ETTUS_BUILD; urgency=low * b200 - Re-sync times - Fix overflow handling - Move the B200 radio control core into usrp/b200/ * cal - Use safe version of set_thread_priority() - Fix handling of discontinuities in power calibration data * chdr - Rename var max_size_bytes to avoid confusion * ci - Weekly builds for UHD-4.2 docker images - Update builds to macOS 12 Monterey - Update commit vcpkg and CMake version - Set continue on error and reduce timeout to 60 - Remove obsolete x4xx pipelines - Upload devtest logs as artifact - Propagate downloader errors and lower timeout - Enable ctest on macOS builds - Flash fpga on x410 ATS runs - Add mpm folder to triggers - Change yaml dependency to ruamel - Add support for Ubuntu 22.04 - Remove Fedora 33 and add Fedora 35 - Add libuhd python dependencies to macOS - Add x410 test to mono pipeline - Enable building of init_usrp - Make uhdSrcDir directly reference Build.SourcesDirectory - Build gnuradio and gr-ettus - Add gnuradio deps to images - Generate installed binaries for downstream use - Add displayNames to parameters - Add embedded builds to uhd mono pipeline - Separate pipeline builds for different os - Refactor dockerOSName to buildOSName - Build on macOS - Device wait to redlock scope for Vivado close - Add Fedora 34 and remove Fedora 32 - rebuild docker images weekly - Refactor installers and add Windows support - Add gnuradio gr-ettus to oe builds - Update template to use checkout_meta_ettus - Add custom boost version support - Remove documentation-only changes from pipeline runs - Enable batch CI - Split CI and PR pipelines for mono pipeline - Enable custom CXX flags, enable -Werror - Let make keep building upon failure - Add clang as a compiler to all Fedora and Ubuntu containers - Add CLA assistant * cmake - mpm: Skip installing binaries for SIM - doxygen: Make MATHJAX_RELPATH configurable via CMake - ncurses: fix building with split tinfo - Remove libatomic check on macOS - Added libatomic check for boost/lockfree/queue.hpp - uhdboost: Fix check for UHD_BOOST_REQUIRED being set - Replace distutils.sysconfig with sysconfig - Replace distutils with CMake for version checks - Set debug to -Og for Clang builds - tests: Conditionally compile tests for X400 - Use LooseVersion to ensure correct version comparisons - Fix rfnoc-example (CMake paths) - Fix issues with static builds and CMRC - Replace CMAKE_{SOURCE,BINARY}_DIR with UHD_*_DIR - tests: Add build-python path to PYTHONPATH - Add check for libatomic linking requirement - Remove duplicate entry in LIBUHD_PYTHON_GEN_SOURCE - Fix VS names and use relative for images - remove redundant include - Correctly set and unset any CMAKE_REQUIRED variables - Fix finding PkgConfig to work robustly (without CMake warnings) * config - Fix clang fallthrough syntax * conversion - Saturate transmit IQ levels on NEON architectures. * convert - Make narrowing conversions saturate - Add benchmarking abilities - Minor cleanup * core - Remove boost::math in favor of std cmath * dbsrx - Fix issue with loop variable * debian - Update version number to 4.2.0 - Update control and package building * debs - Update upload_debs script * deps - rpclib: Replace distutils.dir_util with shutil * devtest - Clarify data type in multi_usrp_test::send_waveform() - Add receive stability test to B2xx devtest - Add receive stability test * dissectors - Fix whitespace formatting in CMake files - Fix inclusion of glib.h and Python version * docs - multi_usrp: Clarify GPIO source bank meaning - x4xx: Document configuring eth0 static IP - n310: Add Filter API section - e31x: Update information on GPIO pin header - Add 100GigE documentation - Move X4x0 GPIO API to be subpage - Update E320 docs - x4xx: Remove redundant GPIO section - rfnoc: Add doxygen tag for missing parameter - Improve table on 'identification' - Update instructions for changing hostname - Update sfp port config location - Update manual for new X410 default targets - Fix Doxygen warnings - Fix reference to RFNoC documentation - rdtesting: Remove invalid rate configuration - stream_args: Clarify usage of stream_args_t::channels - n3xx: Add info on customizable band edges and gain profiles - x4xx: Add new FPGA image descriptions - Improve documentation for replay block - Remove superfluous stylesheet - x310: Remove reference to ORC - Update n3xx tuning notes - Remove full path names from Doxygen generation - Add shim Sphinx config for readthedocs - Improve page on RFNoC block properties - Fix page on GPIO - Fix MathJax formulae rendering - Amend page on RFNoC properties - Remove bmaptool instructions for writing filesystems - Remove obsolete man pages - Update DPDK documentation - Improve documentation for properties and -propagation - Several minor manual improvements - x410: Document GPIO API and capabilities - Collect all RFNoC block controllers in a module in the manual - Align dependencies and bump deb package versions - Clarify set/get_gpio_attr() and GPIO banks - Fix GPIO documentation example - x410: Fix info on loading SD card images with bmaptool - Improve docs for rx_streamer::recv() on overruns - sync: Update page on synchronization - Fix typo in ZBX Block Diagram - usrp_x4xx: improve filesystem update instructions - x4xx: Update information on CPLD updating * dpdk - Add support for DPDK 18.11 API - Correct MTU warning message - Support new MTU discovery - Disable warnings for using an experimental feature - Upgrade to DPDK 19.11 API * e31x/e320 - Amend LO-locked sensor names * e320 - mpm: Remove monitor thread * e3xx - Fix frequency querying - Remove unused constant * examples - gpio: Separate bank and port arguments - Fix channel indexing when reading USRP power - Fix gain testbench name - Add replay_capture.py - benchmark_rate improvements - replay: Improve rfnoc_replay_samples_from_file - Support multiple streamers in benchmark_rate - Fix tx_bursts bandwidth/freq/gain reporting - Improve rfnoc_rx_to_file - Use cmul for gain block in-tree IP example - Test all variants in gain testbench - Make IQ order clear in gain RFNoC block - Improve txrx_loopback_to_file (late recv, Boost, timing) - Show how to use in-tree Verilog header - Add x400/x410 target to RFNoC example * fgpa - rfnoc: Set Replay memory transactions to 2 KiB * firmware - Remove N230 firmware * fpga - x400: Increase replay SEP buffer sizes - x400: Add timed commands support for all radio ctrlport endpoints - Replay block version 1.1 - Update all RFNoC images - ci: Add X4_400 to CI targets default list - n3xx: Add missing BIST image core headers - Use PROTOVER and CHDR_W from RFNoC image builder - n3xx: Fix clock frequency comments - e31x: Update DRAM IP simulation - e31x: Fix DRAM traffic gen IP name - ci: Schedule weekly FPGA pipeline run - ci: Improve IP build caching - ci: Add stages-based pipeline - ci: Ignore objects in hwtools - tools: Add CG_400 image to X410 binaries package - x400: Add x410_400_128_rfnoc_image_core - rfnoc: Fix PPS edge detection - rfnoc: Make Replay packet length independent of burst size - Add SPDX license identifier - x400: Cleanup FPGA Makefile - x400: Add support for DRAM with 400 MHz BW - x400: Change AXI XB for DRAM to 512-bit - rfnoc: Fix strobe probability in radio simulator - rfnoc: Regenerate noc_shells - x400: Set replay SEP buffers to twice MTU - Add SPDX license identifier - e320: Add DRAM ports - n3xx: Fix DRAM FIFO address alignment - rfnoc: Change AWIDTH default for axi_ram_fifo - e31x: Add DRAM support - rfnoc: Add BLANK_OUTPUT to FIR filter block's parameters - x400: Add DRAM enable macro - b2xx: Generate utilization report files - x400: zbx: cpld: Bump ZBX regmap copyright - x400: cpld: Bump CMI wrapper copyright - ci: Increase PR pipeline timeout - x400: Bump minor version - x400: Update rfnoc_image_core files - x400: Add Replay to 100 and 200 MHz images - x400: Add DRAM support - x400: Set DRAM speed to 2.0 GT/s - x400: Add axi_inter_4x64_512_bd IP - x400: Add axi_inter_2x128_512_bd IP - docs: Add B205mini FPGA info - n3xx: rh: cpld: Refactor CPLD build process - Remove noc_shell_regs.vh and sim_rfnoc_lib.svh - x400: cpld: Bump copyright - x400: Bump copyright - x400: Expand PS GPIO port for DIO control - x400: Add GPIO control via ATR and DB state - x400: Connect Radio Blocks to DIO - tools: Fix adding directories for HDL source - hls: Add version to generated HLS IP - x400: Fix rfnoc_image_core.vh path - e320: Connect CTRL_IN pins to FPGA - e320: Remove copy/paste from N310 code - x300: Fix time register readback - usrp2: update build tools to use python3 - tools: Update Vivado scripts to use python3 - x300: OR ATR signals going into db_control - x400: cpld: Add manufacturing support - x400: Refactor CPLDs build process - tools: Add Quartus build utilities - Add ability to get time from Radio block - rfnoc: Add RFNoC CHDR resize module - rfnoc: Add CHDR management util functions - lib: Clean up axi_mux - rfnoc: Add labels to axi_switch generate blocks - rfnoc: Add labels to chdr_mgmt_pkt_handler - rfnoc: Add documentation to chdr_xb_routing_table - Shorten line length for Launchpad linter - x300: Update synchronizer constraint - n3xx: Update synchronizer constraint - lib: Update example constraint in synchronizer - Update help message for setupenv.sh - Remove stale references to UHD_FPGA_DIR - tools: Add UHD_FPGA_DIR definition to synthesis - Set default part for sim in setupenv.sh - Fix Xilinx bitfile parser for Python 3 - Re-order error and data packets - Fix sc16 to sc12 converter - rfnoc: Fix EOB loss in DUC - sim: Add PkgComplex, PkgMath, and PkgRandom - lib: Clean up and document lib files - x400: Remove stale information in register map - ci: Add testbench pipeline * github - Amend PR template with a checkbox for compat numbers * host - devtest: Allow getting mgmt_addr in tests - devtest: Add GPIO tests for reading back ATR settings - x410: Emulate GPIO classic ATR mode using new mode - x410: Cache GPIO source in mb_controller - Add power_reference_iface::sptr declaration - Create meta_range_t::as_monotonic - test: Add UHD_UNITTEST_LOG_LEVEL override - test: Add GPIO DDR register to x4xx mock - Throw exception when accessing properties with incorrect type - Minor cleanups in property_tree code - x4xx: Fix some warnings on mac OS - zbx: Expose tuning table on property tree - x4xx: gpio: Properly unmap FPGA GPIO values - fix build with DPDK v21.11 LTS - Implement nameless_gain_mixin - Make get_mb_controller public - tests: Make x4xx unit test support GPIO - multi_usrp: Merge set_tx_subdev_spec and set_rx_subdev_spec - Add divider constructor to spi_config_t - rf_control: Add internal antenna API abstraction. - tests: Add unit test for ZBX antenna API - Make core_iface inheritence virtual - Implement operator<< for data_reader_t - docs: Fix incorrect usage in GPIO docs - Add char* overload for device_addr_t - Make radio_control constants an enum - Fix typos and small things - Add ability to get time from Radio block - python: Add gpio_voltage python API - Add gpio_voltage discoverable feature - Add RPC calls for GPIO voltage - python: Return mb_controller with reference_internal - x4xx: Implement GPIO API - Add GPIO functions to MPM RPC shim - gpio: Create gpio_atr_offsets to store GPIO registers - Add static_assert to prevent meta_range_t(0,0) * ic_reg_maps - Generate save state read functions * images - Remove references to N230 - Add utilization report files to B2xx image files - Revert x4xx manifest and FPGA compat update - Update N32x CPLD manifest - Make get_images_dir return absolute path - Clear out code from days of yore - Add the utilization report for X410 images (X4_200) - Update image packager script for Python 3 - Update manifest * lib - Set dynamic_lookup and flat_namespace - Make simple_claimer atomic - SSPH: Fix comment for convert_to_in_buff() - Remove superfluous includes of udp_zero_copy.hpp - Remove all remaining usage of boost::numeric::bounds<> - transport: Mark typecast as intended - transport: Initialize _hshake_args_server - rfnoc: Make implicit typecasts explicit - rfnoc: Change enum node_type to enum class - Add various missing includes * libusb - Remove unused context variable * log - Add DPDK version to system info * math - fp_compare: Adapt fp_compare_epsilon API to actual use * max287x - Fix key in table of freq ranges * mpm - ad937x: Fix tuning code - x4xx: Fix clock/time source API - e3xx: Fix get_sync_sources() API - PeriphManagerBase: List all sync-related methods - Make default clock/time source values state-less - e3xx: Simplify code referring to self.dboards - speed up reading gps mboard sensors - n3xx: Recommend reboot USRP after BIST - x4xx: Remove GPIO classic mode register - Factor out common code between E31x_db and Neon classes - e3xx: Fix Pylint warnings in periph_mgr classes - fix ref_locked sensor on n320 - rh: Minor linter cleanup - Use receiving socket for sending response - eeprom: Fix default values in EEPROM utilities - xportmgr_udp: Match DNAT arguments to manpage - eeprom: Improve E320 and N3x0 EEPROM code/comments - cmake: Remove installation of non-relevant EEPROM tools - x4xx: Add function to map from gpio src list indices - Add device name to discovery process - x4xx: Update FPGA minor compat number - Add x4xx DRAM BIST - Fix units for DRAM BIST - Remove further references to rfnoc_num_blocks - x4xx: Align get/set_gpio_src mappings with HDMI pinouts - Demote WARNING on minor compat mismatch to DEBUG - X410: Set correct tuning word - x410: Fix docstrings related to GPS sensors - e320/e31x: Fix lo-lock sensors - x4xx: Add log message for older DIO boards - x4xx: Move DioControl into its own module - x4xx: Add checks before accessing self.dio_control - x4xx: Remove superfluous import - x4xx: update mboard_max_rev - x4xx: Allow retrieving external power state - x4xx: Allow GPIO0 and GPIO1 as port names - x4xx: add DIO GPIO API configuration methods - Fix handling of rfic_digital_loopback argument - rfdc: Tear down RFDC on teardown - x4xx: update mboard_max_rev - add X410 support for 250e6 master clock rate - Expose motherboard regs for debugging - Skip DTS compatibility check if DTS is not being updated. - zbx: Fix revision compat check - Update usrp_update_fs to support X410 - max10_cpld_flash_ctrl: improve programming log * mpmd - Add MTU plausibility check - Increase UHD-side MTU cap for 10 GbE and 1 GbE - Add discoverable feature for trig i/o mode * multi_usrp_rfnoc - Set assignment instead of equality - Add TX buffering using Replay - Reduce latency of get_time_now() * n310 - Add Filter API to n310 - Add frontend bandwidth control - cpld: Get and set TX ATR bits - Deactivate frontend components on radio shutdown * n320 - Fix issue that occasionally prevents lo_locked upon first set_freq - Reduce PLL lock time * n3x0/e3x0 - Remove reference to "master FP-GPIO radio" * n3xx - Add support for rev 10 - Fix White Rabbit * python - rfnoc: Add new replay block APIs to Python API - Add __init__ to uhd.utils - rfnoc: Add connect_through_blocks() and get_block_chain() - Read number of ports from grc file in image builder - Fix RuntimeError: dictionary changed size during iteration - rfnoc: Add get_property bindings - Use setup from setuptools - multi_usrp: Add set_rx_spp() - multi_usrp: Fix issues in send_waveform() - multi_usrp: Fix issues with recv_num_samps() - Fix dropped-sample calculation in benchmark_rate.py - multi_usrp: Fix overloaded function definition - Add new method bindings to noc_block_base - rfnoc: Change reference type for noc_block_base export * radio - Improve log messages for non-implemented corrections * responder - Fix printw function arguments * rfnoc - Update image builder to check for deprecated blocks - Add filter_node python bindings - Modify prop. propagation algorithm (back-edge resolution) - graph: Allow property forwarding on back-edges - Fix test_timed_commands for RFNoC devices - Remove redundant RFNoC block descriptions - Update device port names in image core YAML - Update image builder to check for deprecated port names - Make RFNoC device port names consistent - replay: Add ability to capture and read async info - fir filter: Add support for multiple channels to block controller - Remove UHD3-API usages - radio: Explicitly set MTU forwarding policy to DROP - Fix block buffer sizes referring to MTU - Refactor ctrlport_endpoint; fix MT issues - window: Set window size register after loading coefficients - replay: Add atomic item size property - replay: Add action handler for stream commands - graph_utils: Add ability to declare back-edges - Remove references to nocscript from YAML files - Fix spelling in property resolution error message - Expose buffer parameters for DRAM FIFO block - Rename and enlarge axi4_mm IO signature - Update the MTU forwarding property for some blocks - Set the default MTU forwarding policy to ONE_TO_ONE. - Add post_init() method to noc_block_base - Fix _set_subdev_spec() helper function - set UHD_API_HEADER on property_t - Cache and re-use host endpoints - Ignore errors in ctrlport response packets if ACKs not wanted - Always clear response queue in ctrlport_endpoint - Fix DSP frequency accuracy - Add atomic item size property for RFNoC blocks - transport: Check if streamers are connected in send() and recv() - ddc/duc: Improve variable name for _set_freq() - radio: Fix comment in radio_control_impl - graph: make topology failure more descriptive - Fix block_id::get_tree_root() - Fix back-edge consistency check - Add ops pending to management op - Fix noc_shell direction comments - Enable drop counter on chdr_ctrl_endpoint - Change default block behaviour - Clarify usage of MTU vs. max payload size, remove DEFAULT_SPP - replay block: Disable prop and action propagation - Add more comments to rfnoc_graph - Fix issue in uhd::rfnoc::connect_through_blocks() - radio: Fix async message handling channel checks - mgmt_portal: Fix order of validity checks - Add CHDR width to make args - Make chdr_w_to_bits() C++11-compatible - blocks: Minor cleanup (whitespace, typos) - Remove cruft from UHD 3 (constants) - mgmt_portal: Remove two unused variables - Add vivado-path to rfnoc_image_builder - ddc: Improve unit tests and documentation - duc: Fix frequency range for DUC block - duc: Remove stale references to CORDIC - Allow find_blocks to search by device number or block count. - Fix block id check to allow underscore - Remove obsolete constant * rh - Fix auto DC-offset correction and auto-IQ balance APIs * siggen - Fix direction of rotation * sim - Update chdr_16sc_to_sc12 testbench * systemd - Enable tx flow control automatically * tests - Add filesystem flashing to streaming tests - x410: Add GPIO tests to X410 devtest - add support for new benchmark_rate args - Fix potential resource leak - Build uhd_test library as static when `-DBUILD_SHARED_LIBS=ON` - rfnoc: Add another loop graph test - Streaming tests setup - Enable automated streaming tests on X410 - Add X410 100GbE tests - rfnoc: Amend mock nodes with action support - Add complex include to resolve build - Use new args for x410 streaming tests - Apply clang-format to convert_test - Fix converter benchmark disable on Boost <1.68 - Atomicize counters in benchmark_rate - Add saturating test cases - Add conversion benchmarking tests - Force converter tests to be run with all available prios - Modularize x4xx_radio_mock to use it in other tests - Disable x4xx_radio_block_test on macOS - Add replay-back-edge test - Remove non-functional DPDK test - Add default length for automated streaming tests - Add automated streaming tests - Add streaming setup script for performance enhancements - Remove skip_dram from streaming performance test script - Fix rfnoc_graph mock nodes stop-stream command - Use reference type to prevent copy - Fix check in link_test - Add recv(0) case to rx_streamer_test - Add missing header, required by some compilers * tools - Fixes to uhd_phase_alignment.py - uhd_ubuntu_deb: Require --buildpath - Fix control packet byte enable in CHDR dissector - Add general purpose tool for USRP configuration - Add check for SEP with ctrl enabled to rfnoc_image_builder - Add missing fields to CHDR dissector - Fix rfnoc dissector build * uhd - Update MPM compat minor - Replay block version 1.1 - Fix compiler macro ordering - Fix negligible copy/paste typos in rhodium radio control - Harmonize fuzzy frequency comparisons - Remove FSRU-related files - rfnoc: Let connect_through_blocks() return edge list - Expose uhd::dict and fs_path with UHD_API_HEADER - Demote WARNING on minor compat mismatch to DEBUG - Fix non-standard function name macros - Update git://github.com references to https - Allow pass raw IQ data array to tone generator - Remove tcp_zero_copy - nsis: Remove broken shortcuts in Windows installer - Fix RFNoC-capable detection in uhd_usrp_probe - Remove superfluous boost/bind.hpp includes - Add support for max10 variants - Update manifest for x410 cpld - Update num_recv_frames calculation for ctrl links - Remove spurious template from property dtor - Fix spelling errors - math: Replace wrap-frequency math with a single function - math: Add a sign() function - Replace Boost mutexes and locks with standard options - zbx: Prevent TX antenna config from disrupting RX - mpm: Expose filesystem version information on MPM tree - transport: Avoid exceptions in disconnect_receiver() - Remove Boost version checks for Boost 1.61 - streamer: Restore original recv(0) semantics - Fix usage of std::abs with template parameters - Update version, manifest, and changelogs - Replace boost::thread::id with std::thread::id * utils - Check install-prefix for images - string: Add split string utility function - Add comment re overclocking - Modify set-tx-gain procedure to update gain in one go - Fix comment in noc_shell Mako template - Add space to rfnoc_image_builder help - Get signal above noise floor when finding optimal gain * x300 - Fix LED configuration for TwinRX - Remove usage of CHDR_MAX_LEN_HDR - Fix error message for wrong reference frequency - Remove unused variables in x300_eth_mgr.cpp - Fix MAX_RATE_1GIGE value - Fix sfpp_io_core tuser width - Initialize struct variable before using it * x410 - Correct 100GbE link speed * x4xx_bist - Use get_mpm_client in gpio bist -- Ettus Research Tue, 19 Apr 2022 13:55:00 -0800 uhd (4.1.0.5-2) experimental; urgency=medium * support the new DPDK LTS 21.11 (Thanks cpaelzer!) (Closes: #1001466) -- A. Maitland Bottoms Fri, 14 Jan 2022 21:42:18 -0500 uhd (4.1.0.5-1) unstable; urgency=medium * New upstream tag. * 4 Debian patches upstreamed -- A. Maitland Bottoms Fri, 17 Dec 2021 00:18:02 -0500 uhd (4.1.0.5-0) ETTUS_BUILD; urgency=low * ad9361 - Add comment re overclocking - Modify set-tx-gain procedure to update gain in one go * b200 - Re-sync times - Move the B200 radio control core into usrp/b200/ * cal - Use safe version of set_thread_priority() * ci - Device wait to redlock scope for Vivado close - Add Fedora 34 and remove Fedora 32 - Refactor installers and add Windows support - Add custom boost version support - Remove documentation-only changes from pipeline runs - enable batch CI - Split CI and PR pipelines for mono pipeline - Enable custom CXX flags, enable -Werror - Let make keep building upon failure - Add clang as a compiler to all Fedora and Ubuntu containers * cmake - use LooseVersion to ensure correct version comparisons - Fix rfnoc-example (CMake paths) - Fix issues with static builds and CMRC - Replace CMAKE_{SOURCE,BINARY}_DIR with UHD_*_DIR - tests: Add build-python path to PYTHONPATH - Add check for libatomic linking requirement - remove duplicate entry in LIBUHD_PYTHON_GEN_SOURCE - Fix VS names and use relative for images * dbsrx - Fix issue with loop variable * debs - Update upload_debs script * devtest - Clarify data type in multi_usrp_test::send_waveform() - Add receive stability test to B2xx devtest - Add receive stability test * dissectors - Fix whitespace formatting in CMake files - Fix inclusion of glib.h and Python version * docs - Several minor manual improvements - Collect all RFNoC block controllers in a module in the manual - Align dependencies and bump deb package versions - Clarify set/get_gpio_attr() and GPIO banks - Fix GPIO documentation example - x410: Fix info on loading SD card images with bmaptool - Improve docs for rx_streamer::recv() on overruns - sync: Update page on synchronization - Fix typo in ZBX Block Diagram - x4xx: Document configuring eth0 static IP - Remove bmaptool instructions for writing filesystems * examples - Use cmul for gain block in-tree IP example - Test all variants in gain testbench - Make IQ order clear in gain RFNoC block - Improve txrx_loopback_to_file (late recv, Boost, timing) - Show how to use in-tree Verilog header - Add x400/x410 target to RFNoC example - gpio: Separate bank and port arguments - usrp_power_meter: fix channel indexing when reading USRP power * fpga - Revert "Add ability to get time from Radio block" - Add ability to get time from Radio block - rfnoc: Add RFNoC CHDR resize module - rfnoc: Add CHDR management util functions - lib: Clean up axi_mux - rfnoc: Add labels to axi_switch generate blocks - rfnoc: Add labels to chdr_mgmt_pkt_handler - rfnoc: Add documentation to chdr_xb_routing_table - Shorten line length for Launchpad linter - x300: Update synchronizer constraint - n3xx: Update synchronizer constraint - lib: Update example constraint in synchronizer - Update help message for setupenv.sh - Remove stale references to UHD_FPGA_DIR - tools: Add UHD_FPGA_DIR definition to synthesis - Set default part for sim in setupenv.sh - Fix Xilinx bitfile parser for Python 3 - rfnoc: Fix EOB loss in DUC - sim: Add PkgComplex, PkgMath, and PkgRandom - lib: Clean up and document lib files - x400: Remove stale information in register map - ci: Add testbench pipeline * host - Revert "Add ability to get time from Radio block" - Add ability to get time from Radio block - python: Return mb_controller with reference_internal - x4xx: Implement GPIO API - Add GPIO functions to MPM RPC shim - gpio: Create gpio_atr_offsets to store GPIO registers * images - Update image packager script for Python 3 * lib - Remove all remaining usage of boost::numeric::bounds<> - transport: Mark typecast as intended - transport: Initialize _hshake_args_server - rfnoc: Make implicit typecasts explicit - rfnoc: Change enum node_type to enum class - Add various missing includes * libusb - Remove unused context variable * mpm - x4xx: update mboard_max_rev - x4xx: Allow GPIO0 and GPIO1 as port names - x4xx: add DIO GPIO API configuration methods - mpm: x4xx: Add checks before accessing self.dio_control - Fix handling of rfic_digital_loopback argument - rfdc: Tear down RFDC on teardown - add X410 support for 250e6 master clock rate - Expose motherboard regs for debugging * mpmd - Increase UHD-side MTU cap for 10 GbE and 1 GbE * multi_usrp_rfnoc - Revert "Reduce latency of get_time_now()" - Reduce latency of get_time_now() * n320 - Reduce PLL lock time * n3x0/e3x0 - Remove reference to "master FP-GPIO radio" * n3xx - Add support for rev 10 - Fix White Rabbit * python - multi_usrp: Add set_rx_spp() - multi_usrp: Fix issues in send_waveform() - multi_usrp: Fix issues with recv_num_samps() - Fix dropped-sample calculation in benchmark_rate.py - multi_usrp: Fix overloaded function definition - Add new method bindings to noc_block_base - rfnoc: Change reference type for noc_block_base export * responder - Fix printw function arguments * rfnoc - radio: Fix async message handling channel checks - mgmt_portal: Fix order of validity checks - blocks: Minor cleanup (whitespace, typos) - mgmt_portal: Remove two unused variables - Add vivado-path to rfnoc_image_builder - ddc: Improve unit tests and documentation - duc: Fix frequency range for DUC block - duc: Remove stale references to CORDIC - siggen: Fix direction of rotation * rh - Fix auto DC-offset correction and auto-IQ balance APIs * tests - Remove skip_dram from streaming performance test script - Fix rfnoc_graph mock nodes stop-stream command - Use reference type to prevent copy - Fix check in link_test - Fix potential resource leak * tools - Fix rfnoc dissector build * uhd - add support for max10 variants - update manifest for x410 cpld - Update manifest - update num_recv_frames calculation for ctrl links - Remove spurious template from property dtor - Fix spelling errors - mpm: Expose filesystem version information on MPM tree - Remove Boost version checks for Boost 1.61 - Fix usage of std::abs with template parameters * utils - Get signal above noise floor when finding optimal gain * x300 - Fix error message for wrong reference frequency - Remove unused variables in x300_eth_mgr.cpp - Fix MAX_RATE_1GIGE value - Fix sfpp_io_core tuser width - Initialize struct variable before using it * x410 - correct 100GbE link speed -- Ettus Research Tue, 14 Dec 2021 12:35:55 -0800 uhd (4.1.0.4-7) unstable; urgency=medium * move usrp_update_fs to python3-uhd -- A. Maitland Bottoms Wed, 08 Dec 2021 23:23:47 -0500 uhd (4.1.0.4-6) unstable; urgency=medium * Explicitly set -DENABLE_PYTHON_API=OFF in debian/rules for mipsel -- A. Maitland Bottoms Wed, 08 Dec 2021 17:57:01 -0500 uhd (4.1.0.4-5) unstable; urgency=medium * Add back numpy build-dep everywhere including mipsel -- A. Maitland Bottoms Tue, 07 Dec 2021 20:32:18 -0500 uhd (4.1.0.4-4) unstable; urgency=medium * extend cmake-check-march to include test program builds too. -- A. Maitland Bottoms Tue, 07 Dec 2021 20:22:45 -0500 uhd (4.1.0.4-3) unstable; urgency=medium * check -march option before use (Closes: #1000790) * skip python3-uhd on mipsel -- A. Maitland Bottoms Sun, 05 Dec 2021 16:07:56 -0500 uhd (4.1.0.4-2) unstable; urgency=medium * fix binary-indep build (Closes: #998281) * upload to unstable -- A. Maitland Bottoms Sat, 27 Nov 2021 12:33:25 -0500 uhd (4.1.0.4-1) experimental; urgency=medium * New upstream release -- A. Maitland Bottoms Fri, 15 Oct 2021 23:02:22 -0400 uhd (4.1.0.0-1) experimental; urgency=medium * UHD 4.1 release -- A. Maitland Bottoms Wed, 30 Jun 2021 15:59:49 -0400 uhd (4.0.0.0-5) experimental; urgency=medium * update to v4.0.0.0-145-ga7948beee * fix typo (Closes: #978698) -- A. Maitland Bottoms Thu, 10 Jun 2021 18:48:20 -0400 uhd (4.0.0.0-4) experimental; urgency=medium * update to v4.0.0.0-50-ge520e3ff8 * Added breaks/replaces to uhd-doc (Closes: #978093) -- A. Maitland Bottoms Sun, 27 Dec 2020 15:44:06 -0500 uhd (4.0.0.0-3) experimental; urgency=medium * update to v4.0.0.0-46-g57ca4235b * split out separate new uhd-doc package * new libuhd4.0.0-dpdk and libuhd4.0.0-dpdk-tests packages allow use of Data Plane Development Kit features for some systems * upload to experimental for NEW processing -- A. Maitland Bottoms Tue, 22 Dec 2020 16:27:28 -0500 uhd (4.0.0.0-2) experimental; urgency=medium * update to v4.0.0.0-18-g83e878cf1 * libuhd links to libatomic -- A. Maitland Bottoms Thu, 22 Oct 2020 20:05:47 -0400 uhd (4.0.0.0-1) experimental; urgency=medium * New upstream release * b200: - Add unload-bootloader option to b2xx_fx3_utils - Update FX3 SDK for bootloader and firmware - Fix address for serial number in firmware - Enable power calibration API - Add a prop tree node usb_version * cal: - Add utility to update all .fbs files, or check the generated ones - Add pwr_cal container * cmake: - Use relative path to Python lib location for Windows installer - Add ability to pass CXXFLAGS to CMake environment * docs: - Add new CHDR format to transports - Update register maps - Update FPGA manual - Update mender commands for Zeus filesystems - Add section about network mode on E3xx devices - Add DPDK link detection section - Add Windows-specific UHD Python module notes - Add note about compiling on Ubuntu 20.04 - Update PCIe xport instructions for NI Repos - n3xx: Include WX in table of N320 images - Add stream and transport args documentation - Update Basic/LF dboard references to use new operating mode - e3xx/n3xx: Add sections on FP-GPIOs and how to drive them - n3xx: Document eeprom flags - Add note about DPDK needing to be built as shared libraries - Change DPDK version to 18.11 and make args use underscores - Clarifying which devices support DPDK * dpdk: - Improve link status detection - Increase default num recv frames - Add new DPDK stack to integrate with I/O services * e31x: - Add retry to loopback_self_test - Change RFNoC Ctrl clock to 40 MHz - Fix timeout for timekeeper registers - Fix filter bank and antenna switching for channel 0 - Swap out liberio for internal Ethernet * e320: - Fix timeout for timekeeper registers - Swap out liberio for internal Ethernet * examples: - Fix install paths in OOT RFNoC block example - Add usrp_power_meter example - Update test_messages example - Update gpio example - Add options to benchmark_rate - Add example out-of-tree module for RFNoC modules - Remove thread priority elevation * fpga: - Added AA image mappings to N320 image package - Add Replay Block to RFNoC Core Image - Update DRAM IO signatures - sim: chdr_stream_endpoint_tb improvements - sim: Fix stream command and status models - Update AXI interconnect address range for n3xx and e320 - rfnoc: Update CHDR stream INIT command - Update coding guidelines - Replaced RFNoC architecture with new 4.0 version - Added modelsim make simulation target - Upgrade to Vivade 2019.1 - Removed unused coregen files and modules - Removed fpga submodule and merged into uhd repo - lib: Change max FFT size to 1024 - lib: add Intel MAX10 architecture for 2clk FIFO - rfnoc: Port RFNoC Keep One in N block to new RFNoC architecture - rfnoc: Port RFNoC Replay block to new RFNoC architecture - rfnoc: Port Signal Generator RFNoC block to new RFNoC architecture - Add Switchboard RFNoC block - Remove liberio - rfnoc: Port RFNoC Moving Average block to new RFNoC architecture - rfnoc: Port Log-Power block to new RFNoC architecture - rfnoc: Port RFNoC Window block to new RFNoC architecture - lib: Add synthesizable AXI4-Stream SV components - lib: Add interface and model for AXI4-Lite - rfnoc: Add support for 512-bit CHDR widths - rfnoc: Port RFNoC Add/Sub block to new RFNoC architecture - rfnoc: Port Vector IIR RFNoC block to new RFNoC architecture - lib: Add AXI-Stream splitter (axis_split) * lib: - Remove recursive locks in apply_corrections - Add power cal manager - deps: Add FlatBuffers 1.11.0 header files - Add DPDK service queue * mpm: - e31x: Accept FF terminated strings in eeprom (legacy support) - Return 10 Gbs link speed on failure - Exclude internal NIC for network hosts - Add ability to run scripts to MPM shell - n3xx: Remove eth1, eth2 from interface list - Default virtual NIC CHDR IP selection - Enable internal NIC on the N3xx - Clean up code, improve Pylint score - Move common mboard regs code to common location * mpmd: - Remove liberio * multi_usrp: - Fix connect/disconnect of RFNoC chains - Various multi_usrp_rfnoc fixes * n310: - Add Replay Block to default FGPA images - Fix GPIO registers * n320: - Add Replay Block to default FGPA images - Double radio ingress buffer size - Enable inverse sinc filter for DAC37J82 * n3xx: - Fix timeout for timekeeper registers - Swap out liberio for internal Ethernet * python: - Add peek/poke bindings to noc_block_base - Add Keep One in N block controller bindings - Add replay RFNoC block controller bindings - Add siggen RFNoC block controller bindings - Add Switchboard block python bindings - Add moving average RFNoC block controller bindings - Add bindings for C++ CHDR Parser - Add window RFNoC block controller bindings - Add FFT RFNoC block controller bindings - Add null RFNoC block controller bindings - Add vector IIR RFNoC block controller bindings - Add radio RFNoC block controller bindings - Add FIR filter RFNoC block controller bindings - Add Fosphor RFNoC block controller bindings - Add DUC RFNoC block controller bindings - Add DDC RFNoC block controller bindings - Added new RFNoC image builder module under the uhd module - Remove Python2-specific code - Included complex.h to allow pybind to convert that data type * rfnoc: - replay: Update packet size on mtu update - Set null source/sink block initial state - Add support for 32-bit memory address widths to Replay block - Enable SEPs with connect_through_blocks - Exit disconnect() early if nodes not in node map - Add multichannel register interface - Added support for destruction of streamers - Add Keep One in N block support - Port siggen RFNoC block controller support to new RFNoC architecture - Add Switchboard block support - Port Moving Average block controller to new RFNoC architecture - Port Log Power RFNoC block support to new RFNoC architecture - Port window RFNoC block controller to new RFNoC architecture - Port Add/Sub RFNoC block support to new RFNoC architecture - Add USE_MAP prop/action forwarding policy - Port Split Stream RFNoC block to new RFNoC architecture - Port Vector IIR RFNoC block support to new RFNoC architecture - Port RFNoC fosphor block to new RFNoC architecture - Port FIR filter RFNoC block controller to new RFNoC architecture - Add multichannel register interface - Add RFNoC Python API - Unify endianness of transports - Add DMA FIFO block controller - examples: Port examples to new RFNoC - Implement flushing on overrun - client_zero can track num SEPs and num ctrl EPs separately - Add basic round-robin allocation for links - Add ability to select transport for streamers to user APIs - Use link_stream_manager's mgmt_portal for all mgmt packets - graph: Optimize property propagation algorithm - Port DUC block controller to new RFNoC architecture - Add MTU tracking - Implement overrun handling using action API - Port null block controller to new RFNoC architecture - Add mb_controller API - Port radio block controller to new RFNoC architecture - Port default block controller to new RFNoC architecture - Port DDC block controller to new RFNoC architecture - Add rfnoc_graph class - Add action API - Refactored CHDR packet interfaces - Add noc_block_base class * tests: - Fix build issue with Boost 1.67 - Add unit tests for new RFNoC block controllers - Fix multi_usrp_test - Add unit tests for pwr_cal_mgr - Migrated rfnoc block tests to dedicated subdirectory - Add more tests for max rate streaming - Add tests to exercise max streaming rates and report results * tools: - Update dissectors for Wireshark major version 3, new CHDR - Update FPGA functional verification tests for X3x0 mcr's & dpdk * transport: - Implement eov indications for Rx and Tx streams - Implement an I/O service that uses an offload thread - Implement a single-threaded I/O service * twinrx: - Bypass adf535x feedback divider - Update synthesizer register values for improved rf performance - Fix increased noise floor - Remove decimation from frontend * uhd: - Disable optimizations for Mac for build speed - remove liberio - improved handling of empty serial number hints - Add discoverable_features API - Add reference power level API to multi_usrp and radio_control - Add fuzzy serial number checking - paths: Harmonize around XDG Base Directory specification - cal: Use usrp::cal::database instead of CSV files - cal: Add iq_cal calibration data container class - cal: Add calibration container class - cal: Add database class - Introduce I/O service manager - Replace usage of boost smart pointers with C++11 counterparts - add udp boost asio implementation of transport interface - Add thread affinity utility functions - types: Extend stream_cmd_t::num_samps to 64 bits * utils: - Expose CHDR Parsing API - Expose CHDR Types in Public API - Support expressions for num_ports in block defs - Let uhd_images_downloader also use HTTPS proxies - Fix FPGA search in rfnoc_image_builder from fpga-src to fpga - Add convert_cal_data utility - image_builder: Support parameterized number of ports on blocks * x300: - Add Replay Block to default FGPA images - Update frame sizes for 10GbE - Fix for incorrect PCIe buffer size values - Change default dboard clock rate from 50 to 100 MHz - Update maximum bitstream size - Enable power reference API - Expand DRAM address space to 1G - Add front-panel GPIO source control -- A. Maitland Bottoms Mon, 14 Sep 2020 18:06:39 -0400 uhd (4.0.0.0~rc1-1) experimental; urgency=medium * New upstream release candidate -- A. Maitland Bottoms Sat, 29 Aug 2020 00:22:11 -0400 uhd (3.15.0.0-4) unstable; urgency=medium * update to v3.15.0.0-54-gbc585b436 -- A. Maitland Bottoms Thu, 13 Aug 2020 19:37:00 -0400 uhd (3.15.0.0-3) unstable; urgency=medium * update to v3.15.0.0-44-g5a9f9ed96 * bump standards-version, keeping usrp user as legacy for now. * Use https for Vcs* entries. Update Homepage link. * Build with python3-dev (Closes: #943636) * path reporting good again (Closes: #908912) * Only python3 (Closes: #938747) -- A. Maitland Bottoms Fri, 12 Jun 2020 21:42:28 -0400 uhd (3.15.0.0-2) unstable; urgency=medium * upload to unstable -- A. Maitland Bottoms Sun, 05 Jan 2020 23:32:04 -0500 uhd (3.15.0.0-1) experimental; urgency=medium * New upstream release * API bump uploaded to experimental -- A. Maitland Bottoms Thu, 02 Jan 2020 19:03:53 -0500 uhd (3.14.1.1-1) unstable; urgency=medium * New upstream release * Device3: latch n on m in axi_rate_change in DUC/DDC * Device3: UART: fix TX <-> RX, FIFO size as parameter * Device3: Restore default buffer sizes for MPMD UDP * RFNoC: Fix off by one error in window.v * E320: fix time source clobbering ref source * B200: Add command to query bootloader status * RFNoC: fix multidevice graph connections * MPMD: Fix corner case in MPM device discovery * MPM: fixed mboard_max_revision value (MPM compat check failures) * MPM: Fix version string for logger * Docs: x300: update docs for multiple timed commands * Docs: Fix Doxygen warnings due to spurious backslashes * Docs: RFNoC: Fix Doxygen warning due to undoc'd parameter * Docs: Adjust FPGA functional verification tests * Docs: Fix MPM cmake command for E320 * RFNoC: Re-enable flow ctrl for blocks on same xbar * Tools: Fix build issues with kitchen_sink * cmake: Add UHD_COMPONENT variable * let pkg-config pass along -lboost_system (Closes: #940135) -- A. Maitland Bottoms Mon, 07 Oct 2019 00:36:37 -0400 uhd (3.14.1.0-2) unstable; urgency=medium * upload to unstable * fix-find-utility (Closes: #772412) -- A. Maitland Bottoms Thu, 15 Aug 2019 12:13:12 -0400 uhd (3.14.1.0-1) experimental; urgency=medium * New upstream release -- A. Maitland Bottoms Wed, 07 Aug 2019 23:44:25 -0400 uhd (3.13.1.0-3) unstable; urgency=high * Fix armhf shell test syntax -- A. Maitland Bottoms Tue, 15 Jan 2019 00:08:48 -0500 uhd (3.13.1.0-2) unstable; urgency=high * Debian armhf needs NEON_SIMD_ENABLE=OFF -- A. Maitland Bottoms Fri, 11 Jan 2019 16:43:32 -0500 uhd (3.13.1.0-1) unstable; urgency=high * New upstream stable release -- A. Maitland Bottoms Thu, 10 Jan 2019 10:51:45 -0500 uhd (3.13.1.0-0ubuntu1) ubuntu_release; urgency=low * E320: Fix front panel GPIO readback * E320: Fix master_clock_rate setting * E320: Print extra ouptut for ref_clock BIST * E320: Fix gps_locked type * E320: Fix return value of get_fpga_type() * N3xx: Enable setting clock and time sources at runtime * N3xx: Add ref_clock BIST * N3xx: Improve set_time_source() and set_clock_source() * N3xx: Add exception for init failure * N3xx: Remove HA, XA images packages * N3xx: Change init() procedure to reduce configuration time * N310: Add frequency bounds * N310: Fix RX antenna mapping * N310: Add log messages when re-initializing dboards * N310: Add skip_rfic argument to reduce time of BIST * N310: Add initialization of TX bandwidth * E310: Fix initialization of antenna and frequency values * E310: Type-cast fix for Boost * X300: Improve firmware compat error message * X300: Updated niusrprio driver * X300: Add recovery for duplicate IP addresses in EEPROM * X300: Prevent duplicate MAC and IP addresses from being programmed * X300: New mode to configure master clock rate * X300: Implement RFNoC get antenna functions * B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware * B2xx: Revert changes to DSP core to fix scaling factor adjustment * B2xx: Restore asynchronous reset of AD936x (fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors) * TwinRX: enable ch1 lo amps if ch2 is using an external lo source * TwinRX: Correctly initialize antenna mapping on X300 * TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs * TwinRX: Fix initialization * TwinRX: Tuning improvements * TwinRX: Enable phase resync on ADF535x * TwinRX: Make routing to LO1 and LO2 mutually exclusive * BasicRX/LFRX: Fix real mode in rx_frontend_core_3000 * UHD: Define UHD_API as empty string when building static lib * UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport * UHD: Add support for NEON SIMD * UHD: Fix usb_dummy_impl compilation in MSVC * UHD: Reconcile time_spec operators with boost concepts * UHD: Fix rounding in ddc/duc rate calculation * UHD: Increase MPMD RPC timeout when calling set_time_source() * UHD: Fix RX streamer SOB and EOB handling * UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor * UHD: Change SOVERSION to ABI string and VERSION to full UHD version * UHD: Update cmake style to use lower case commands * UHD: Add SOURCE_DATE_EPOCH * UHD: Improve logic for UHD_IMAGES_DIR * UHD: Add RUNTIME_PYTHON_EXECUTABLE * UHD: Fix return value of get_rolloff() for filters * UHD: Properly register devtest * UHD: Fix log statement for Port number on RFNoC block * UHD: Use "MATCHES" instead of "STREQUAL" for "Clang" * UHD: Fix GPGGA string formatting for gpsd * Device3: Set default block control response SIDs * Device3: Fix block control flushing * RFNoC: Improved flushing mechanism in noc_shell and dma_fifo * RFNoC: Install missing dma_fifo_block_ctrl header * RFNoC: Replace some [] with .at() in radio_ctrl_impl * RFNoC: Fix graph traversal * MPM: Add Git hash, version to device info * MPM: Reset the RPC server upon reload * MPM: TDC: Update PDAC BIST and flatness test to use latest APIs * MPM: Fix handling of 0-valued dt-compat * MPM: Fix GPSD sensor names for N3xx and E320 * MPM: Add args to update_ref_clock_freq to properly support dynamic setting * of clock and time references * MPM: Fix Pylint warnings * MPM: Identify sysfs gpios more generically * MPM: Add lock_guard() function * MPM: Factor E320 and N3xx BIST code into common module * MPM: Add gpsd error handling * MPM: Add FPGA git hash to device info * MPMD: Increase RPC timeout during readng mb sensor * MPMD: Improve error message for compat number mismatches * Python API: Enable Python API on Windows * Python API: Change .dll to .pyd for Win32 * Python API: Fixing Boost.Python initializer visibility * Python API: Fix duration of benchmark rate * Python API: Add missing constructors of time_spec_t * Python API: Expose streamer timeouts * Python API: Tighten the scope of releasing the GIL * Python API: Add device_addr_t * Python API: Populate the tune_result_t binding * Utils: Many fixes and enhancements for uhd_images_downloader * Utils: Update query_gpsdo_sensors to work on E310 * Examples: Removed some legacy code patterns from RFNoC examples * Examples: Fix channel argument for rx_samples_to_file * Examples: Fix benchmark_rate MIMO synchronization * Examples: Add phase alignment example * Examples: Fix RX antenna not being applied in txrx_loopback_to_file * Test: Add more env vars, make Py3k compatible * Test: Add multi_usrp_test.py to devtest * Test: Clean up, refactor, and improve devtest * Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest * Test: Reduce sample rate for E320 1G devtest * Test: Add unit test for eeprom_utils * Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call * Docs: Minor tweaks to the Python API manual page * Docs: Add E320 test procedures * Docs: Added TwinRX page * Docs: Fix N210 MIMO Phase Alignment test command * Docs: Add E320 information * Docs: Improve sections on clock/time references * Docs: Add section on X300 motherboard clocking * Docs: Add more information on Salt for N3xx and E320 * Docs: Adjust E310 functional verification tests * Docs: Add documentation on GIL release * Debian: Update control files * Images: Add N3xx CPLD file to manifest -- Ettus Research Wed, 09 Jan 2019 04:46:44 -0800 uhd (3.13.1.0~rc1-3) experimental; urgency=medium * update to v3.13.1.0-rc1-1-gd3b7e90ae * build with default Python3 and boost copmponents (Closes: #914983) * Update compat level to enable parallel builds (Closes: #914322) * build with ninja -- A. Maitland Bottoms Thu, 29 Nov 2018 00:47:43 -0500 uhd (3.13.1.0~rc1-2) experimental; urgency=medium * Correct path to UHDTargets.cmake -- A. Maitland Bottoms Fri, 09 Nov 2018 20:46:00 -0500 uhd (3.13.1.0~rc1-1) experimental; urgency=medium * New upstream pre-release, ABI bump There have been 86 commits since the 3.13.0.2 release * Use Debian package version, not git describe * Install static libuhd.a with libuhd-dev * Modern CMake patch applied - provide exported targets UHD::uhd -- A. Maitland Bottoms Sun, 04 Nov 2018 13:11:59 -0500 uhd (3.13.0.2-1) experimental; urgency=medium * New upstream release * mpm: mg: move init_rf_cal before JESD de/framer bringup -- A. Maitland Bottoms Wed, 22 Aug 2018 15:06:37 -0400 uhd (3.13.0.2-0ubuntu1) trusty; urgency=low * N3xx: Fix issue where changing the clock/time source could result in clocks becoming unlocked * N3xx: Improve error messages for invalid clock/time settings * N3xx: Add support for Rev G mboard * MPM: Add function parameter to support holding AD9371 in reset * Docs: Add section on building fs/SD images for N3xx * Docs: Fix Doxygen warnings -- Ettus Research Tue, 14 Aug 2018 03:57:45 -0800 uhd (3.13.0.1-2) experimental; urgency=medium * debug and fix broken python3-uhd build for libboost_python-py36 -- A. Maitland Bottoms Wed, 15 Aug 2018 12:23:59 -0400 uhd (3.13.0.1-1) experimental; urgency=medium * New upstream release upload to experimental first to start ABI migration * ENABLE_PYTHON_API in debian/rules -- A. Maitland Bottoms Tue, 07 Aug 2018 19:00:13 -0400 uhd (3.13.0.1-0ubuntu1) trusty; urgency=low * N3xx: Fix UIO usage in Aurora BIST * N3xx: Fix EEPROM parsing (for upcoming hardware) * UHD: Fix install path for Python API -- Ettus Research Tue, 14 Aug 2018 03:57:45 -0800 uhd (3.13.0.0-0ubuntu1) trusty; urgency=low * N3x0: Enable fast-reinit, fix power level issue, accept 0x01 PID for AD9371, fix concurrency issues with Liberio * B200: Fix sc8/sc12 modes, fix frame-size related issues, fix tick rate coercion, fix issues on update of tick rate, fix EOB-not-seen issue * E310: Move to RFNoC architecture (this disables network mode!) * UBX: Fix phase synchronization for 184.32 MHz master clock rate, * multi_usrp: Fix get_?x_info() API calls * UHD: Remove more Boost usage, fix some compiler warnings, default to all-channels subdev specs for X3x0 and N3x0, various LMX2592 fixes, bump minimum CMake to 2.8.2, fix logging dtor issues * RFNoC: Merge all existing RFNoC features into master * FPGA: Fix various testbenches, add batch testbench execution mode, improve uhd_image_builder and uhd_image_builder_gui, add all existing RFNoC features * Add Python API * MPM: Enable Rev2 EEPROM format, fix some rare issues when detecting Ethernet devices * CMake: Allow to override UHD_GIT_BRANCH, fix Python-finding logic, add ENABLE_N300 target -- Ettus Research Tue, 14 Aug 2018 03:57:45 -0800 uhd (3.12.0.0-3) unstable; urgency=medium * ENABLE_RFNOC in debian/rules -- A. Maitland Bottoms Mon, 25 Jun 2018 15:02:24 -0400 uhd (3.12.0.0-2) unstable; urgency=medium * upload to unstable -- A. Maitland Bottoms Thu, 07 Jun 2018 22:19:53 -0400 uhd (3.12.0.0-1) experimental; urgency=medium * New upstream release upload to experimental first to start ABI migration -- A. Maitland Bottoms Wed, 06 Jun 2018 13:23:58 -0400 uhd (3.12.0.0-0ubuntu1) trusty; urgency=low * N3x0: Add White Rabbit support, add N300 support, standard BIST includes fan, fix issue with 1GigE, switch to 2 radio blocks with 2 channels each, upgrade TDC to version 2.0, fix issue in ARM deframer * X300: Enable BasicRX to use A/B/AB/BA muxing setups, more consistent logging, fix enumeration issue with TwinRX * USRP2/N2x0: Re-add ability to modulate in the DAC, improve ISE settings to better meet timing * B205mini: Fix global reset, improve timing in b205_ref_pll * UHD: Remove a lot of Boost usage, mostly replaced by C++11 features, more unit tests, fix Boost 1.67 compatibility, fix compiler warnings, add API to query clock rate range, fix get_usrp_?x_info * MPM: Refactored N3xx code, moved C++ standard to 14, refactor Boost.Python bindings, use CMake variable MPM_DEVICE * Logging: Allow disabling fastpath msgs at runtime * Docs: Clarified meaning of DSP frequencies, improved manual section on synchronization, added some known issues to B100, USRP2, and USRP1, update test test procedure description * Examples: Improved benchmark_rate (added failure thresholds, fixed incorrect calculation of samples on drops, fixed timeout values), minor fixes to txrx_loopback_to_file * Utils: Handle U's in calibration tools, create-lvbitx.py is now Py3k compatible, fixed git-hash.sh * RFNoC: DDCs/DUCs use DDSes instead of CORDIC, add DMA-based replay block in FPGA, add 64-bit support to axi_wrapper, add compat number to radio block, * Debian: Fix rules file, fix Changelog format * Fix license headers * This release includes all bugfixes and features from previous releases, in particular, the 3.11.* release cycle -- Ettus Research Tue, 5 Jun 2018 10:38:00 -0800 uhd (3.11.1.0-1) unstable; urgency=medium * New upstream release * update watch file -- A. Maitland Bottoms Mon, 21 May 2018 00:05:20 -0400 uhd (3.11.1.0-0ubuntu1) trusty; urgency=low * N310: fix compiler warnings * N310: Implement digital loopback * N3xx: Add N3xx devtest * X300: Properly coerce master clock rate (tick rate) * X300: handle bad weak_ptr during pcie discovery * X300: handle bad weak_ptr during pcie discovery * X300: Fix check_radio_config() to fix errors when using a single dboard in slot A * B200: docs: Suggest modifying recv_frame_size for more stability * B200: Fix bandwidth warnings and ranges * N2xx: Fix regression issue that limited tuning range * UBX: Change antenna functions to coercers on antenna/value properties * adf4002: Fix register programming for power down bit * UHD: Fix config file path for some Windows builds * UHD: Add operators == and != for uhd::dict * UHD: Add device_addr_t constructor from map * UHD: Fix range of gain group to skip gains with zero step * UHD: Changes to support Boost 1.67 * UHD: Correctly set end of burst flag in RX metadata * UHD: Reduce usage of boost::assign, boost::this_thread::sleep, and boost:bind * UHD: Update multi_usrp::get_usrp_?x_info() for MPM devices * UHD: Refactor static const values to fix linker errors in niusrprio * mpm: cmake: Add git hash and version info to Python module * mpm: Add reference counters to UIO * mpm: Add offset to EEPROM reads * mpm: Disable PPS out during initialization * mpm: Update cmake to find the correct python3 * mpm: Bump maximum supported revision to 5 (Rev F) * mpm: Fixed db slot typo in db-id * mpm: Increased claim timeout, made a separate RPC connection for claim, and added asyn calls for long RPC executions * mpm: Improve xport<->SFP mapping algorithm * mpmd: Improved find routine to fail fast and verify correct device is reachable * mpmd: Add missing virtual destructors * rfnoc/x300: Make sure peek32() and peek64() are called with actual addresses * rfnoc: ctrl_iface cleanup * rfnoc radio: Improve warning for too many samples requested * rfnoc radio: get_rx_stream resets sequence num * examples: Increase settling time, increase buffer fill time, and fix subdevice selection in txrx_loopback_to_file * examples: Improvements to benchmark_rate * utils: downloader supports multiple RegExs * utils: Added code to handle underruns during self calibration * utils: Fix 30s tiemout in query_gpsdo_sensors * logging: Improve style consistency and demote some messages * logging: Fix UHD_LOG_FILE cmake variable * Docs: Add Known Issues section to USRP1, B100, and USRP2/N2x0 * Docs: Hide dependencies directory from Doxygen * Docs: Clarify subdev specs and magnesium driver usage for N300/N310 * cmake: Improve warning for missing requests * cmake: update NSIS template * cmake: Remove images downloader section (replaced by manifest) -- Ettus Research Wed, 16 May 2018 10:05:17 -0800 uhd (3.11.0.1-1) unstable; urgency=medium * New upstream release * use_SOURCE_DATE_EPOCH patch -- A. Maitland Bottoms Sat, 31 Mar 2018 09:45:31 -0400 uhd (3.11.0.1-0ubuntu1) trusty; urgency=low * N300: Added driver support (includes some refactoring of N3xx codebase) * MPM: Fix PyLint warnings, Fix error handling for TCA communication errors, Fix printout of AD9371 version * uhd_images_downloader: Create unique archive names for images archives (now include git hashes in the filename) * uhd_images_downloader: Fix SHA256 check * utils: Add support for N3xx filesystem images to images downloader * UHD: Minor logging fixes * UHD: fix legacy compat to work with 2TX radio block * X300: improve lvbitx bitstream md5 read time * examples: Enhance benchmark_rate with more stats and timestamps for errors * cmake: Correctly fail when an unavailable component is requested * debian: Add UHDConfig.cmake to install list for libuhd-dev -- Ettus Research Wed, 28 Mar 2018 03:28:36 -0800 uhd (3.11.0.0-1) experimental; urgency=medium * Debian build * Install rfnoc xml block descriptions with libuhd-dev * PDF documentation in /usr/share/doc/uhd-host/doxygen/latex/refman.pdf.gz * ABI/API changes from 3.10.3.0-2 using abi-compliance-checker in /usr/share/doc/libuhd-dev/libuhd-dev_3.11.0.0-1_report.html -- A. Maitland Bottoms Mon, 05 Mar 2018 21:49:24 -0500 uhd (3.11.0.0-0ubuntu1) trusty; urgency=low * N310: Added driver * UBX: Add support for CAL antenna for Rev E * Added the module peripheral manager (MPM) with all subcomponents (N310 drivers, mpm_shell, RPC server, BIST, etc.) * UHD: Added rpclib as a internally tracked dependency * UHD: Reduced the usage of Boost * UHD: Updated uhd_images_downloader: Now uses more elaborate manifest to optimize downloads * UHD: Introduced uhdlib internal include paths * UHD: Add support for configuration files. USRP settings can now be set using a uhd.conf file in addition to device args * UHD: Add narrow and narrow_cast * gr-usrptest: Various bugfixes * Updated required Vivado version to 2017.4 * Updated all license headers to use SPDX identifiers and correctly identify Ettus Research as part of National Instruments * This release includes all bugfixes and features from previous releases, in particular, the 3.10.* release cycle -- Ettus Research Mon, 05 Mar 2018 10:48:10 -0800 uhd (3.10.3.0-2) unstable; urgency=medium * Undo botched shlibs setting (Closes: #889894) -- A. Maitland Bottoms Thu, 08 Feb 2018 20:14:46 -0500 uhd (3.10.3.0-1) unstable; urgency=medium * New upstream release * update debian/libuhd-dev.abi.tar.gz.amd64 * Keep Doxygen's jquery.js (Closes: #887510) * X300 Fix max rate calculation for 1 GbE Fix for DAC synchronization errors (unexpected FIFO depth) Reduced CPU usage during TX * N230 Properly initialize request structure before discovery * B200 FX3 firmware performance opitimizations Fixed sequence error on second TX burst * TwinRX Added ADF5356 synth and Rev C support * UBX Add implementation of TDD xcvr_mode and for TX PA on in TDD mode (to reduce transient on older revs) Add support for UBX-TDD * C API Fixed dboard EEPROM revision error handling Make uhd_rx_streamer_last_error use SAFE_C Better error handling in uhd_usrp_get_[t/r]x_stream * RFNoC Fix ctrl_iface to pop sequence numbers only after success Fix sequence number error message in ctrl_iface FPGA fix for sr_read() failure to ack errors FPGA fix for repeated sequence number for RX packets with 1 sample FPGA fix for axi_serializer edge case * Docs Fixed B200 power LED description Update README application links * UHD Utilize poll() instead of select() for UDP transports where possible to avoid descriptor limits Fix build with Boost 1.66 Add EEPROM info to dboard_base class so daughterboard code can access all EEPROM info -- A. Maitland Bottoms Sat, 03 Feb 2018 15:57:57 -0500 uhd (3.10.2.0-3) unstable; urgency=medium * update to release_003_010_002_000-3-g122bfae1a x300 impl: fix bytes/s for 1GigE C API: Dboard EEPROM revision error handling fix UDP transport: Utilize poll instead of select * Doxygen FULL_PATH_NAMES = NO -- A. Maitland Bottoms Tue, 21 Nov 2017 00:30:26 -0500 uhd (3.10.2.0-2) unstable; urgency=medium * avoid gcc 7 and armhf neon for now (Closes: 873608) by bringing back debian-armhf-convert-without-neon patch -- A. Maitland Bottoms Tue, 05 Sep 2017 18:48:41 -0400 uhd (3.10.2.0-1) unstable; urgency=medium * update Debian copyright * uhd-host suggests fdisk (Closes: 872136) * change library package name and soname on every API and ABI change * allow UHD library and utilities to be in separate lib directories -- A. Maitland Bottoms Wed, 23 Aug 2017 01:21:30 -0400 uhd (3.10.2.0-0ubuntu1) trusty; urgency=low * multi_usrp: Fixed get_normalized_tx_gain. * E300: Fix for streamer recreation issue. Reduced minimum timeout, fixed potential race condition. * X300: Fix for network discovery, will now return early when correct serial is found. Fixed issue with DAC sync. All async messages now go through single DMA channel on PCIe. Improved TX performance. Fixed page size acquisition for PCIe. Fixed some FW communication errors. Improved flow control. Removed MTU throttling. Legacy compat falls back to min spp for mixed transport types. * CBX: Fixed LO LPF behaviour in 1.5-2 GHz range. * UBX: Fixed dtor SIGABRT issue. Better error handling for various dboard clock rates. * TwinRX: Added LO reimport feature. * GPSDO: Improved detection. Improved query_gpsdo sensor. * RFNoC: Fixed issue with DDC and DUC command tick rate. * UHD: Fixed potential memory leak in tasks. Fixed get_normalized_tx_gain(). Fixed default socket buffer size to honor MTU. * Examples: Added channel param to samps to/from file. sync_to_gps exits instead of uncaught throw. latency_test improved output. Use next_pps in test_clock_synch. Added TwinRX FHSS example. * Utils: Modified behaviour of uhd_images_downloader so it won't delete dirs when using -i * Tools: Updates to CHDR dissector. Added set_time_source_out(). Fixed LO API. * C API: Fixed some missing fields in USRP info. * Docs: Many minor fixes. Fixed Doxygen warnings related to /* in files. * CMake: Fixed GCC 4.4 compilation issue. Added ability to specify package names. -- Ettus Research Mon, 31 Jul 2017 02:37:48 -0800 uhd (3.10.1.1-1) unstable; urgency=medium * change library package name and soname on every API and ABI change * allow UHD library and utilities to be in separate lib directories * debian upload -- A. Maitland Bottoms Sun, 07 May 2017 10:41:14 -0400 uhd (3.10.1.1-0ubuntu1) trusty; urgency=low - Docs: The protocol for Gen-3 devices is now consistently referred to as CHDR. - X300: Fixed EEPROM corruption bug (happened when two processes would access find routines on the same device at the same time). Improved initialization time. CE clock is now 214 MHz. Fixed channel list generation. Find routines now more lenient in case one devices fails (others can still be found then). Improve PCIe behaviour. Fix timed commands for non-TwinRX dboards. Improve AXI Interconnect (faster, improved build timing). - N230: Use second_addr (like X300). - C API: Added UHD_VERSION macro. Fixed online rate change. - Utils: Minor fixes to uhd_images_downloader. - Build/CMake: Fixed some Py3k build issues. Fixed many compiler warnings. Allow to specify package names. - RFNoC: Fixed sampling rate mismatch error. Noc-Shell uses a non-cascaded 2-clk FIFO. Increase default FIFO sizes on DUC and DDC blocks. - UBX: Force on RX driver to eliminate transient. - Transport code: Fixed memory leak. - FPGA repository: Merged usrp3_rfnoc and usrp3 directories again. Cleaned up superfluous files. Clean separation between Gen-3 and other devices in usrp3. -- Ettus Research Thu, 26 Jan 2017 04:15:56 -0800 uhd (3.10.1.0-1) experimental; urgency=medium * New upstream release -- A. Maitland Bottoms Fri, 04 Nov 2016 19:21:30 -0500 uhd (3.10.1.0-0ubuntu1) trusty; urgency=low - Fixed multiple compiler warnings - Multiple documentation fixes - X300: RX strobe lines are always in sync on device initialization. DB EEPROM now properly written. ignore-cal-file no longer ignored. Fixed case where too large recv_frame_size settings could break things. Reduced ZPU clock speed (helps FPGA timing). Added area constraints for AXI interconnect. Improved halfband scaling in rx_frontend. Improved PCIe streaming reliability - B2xx: Clear sequence numbers in idle state. - RFNoC: Nodes disconnect on destruction. Fixed setting of correct bits on sr_error_policy. DDC does no longer clear timed commands on EOB. DUC fixed timed CORDIC tuning. Enable Noc-Shell response FIFOs (fixes simultaneous commands on multiple channels). - UBX: Changed default performance parameters - TwinRX: LEDs properly light up depending on channels. Fixed issue of multiple (redundant) writes. Simplified API steps for phase synchronization - XCVR: Query dboard clock instead of DAC clock. Helps in X3x0s. - GPS: Fixed message for case when no GPS is present. Fixed multiple GPS-related issues. - Converters: Fixed floating point rounding error in tests. - Utils: uhd_usrp_probe can now query vectors - Fixed issue that prevented soft_regs working on 32-bit systems - Tools: Merged dissectors into common directory. - CMake: -Og is the default now for gcc-based Debug builds. -- Ettus Research Wed, 02 Nov 2016 01:20:07 -0800 uhd (3.10.0.0-1) unstable; urgency=medium * New upstream release, update to release_003_010_000_000-1-g7fbf0e5 -- A. Maitland Bottoms Fri, 12 Aug 2016 18:32:12 -0400 uhd (3.10.0.0-0ubuntu1) trusty; urgency=low - Changed version string to quadruplets (Major.API.ABI.Patch) - Minimum dependencies bumped for gcc, Boost, CMake, clang and Python. - TwinRX: Added support. Includes LO API for multi_usrp. - N230: Added support - Added expert framework - X300: Completely restructured to use RFNoC - X300: FPGA builds include git hash, dual 10GigE receive is now supported (allows 2x200 Msps receive over 2x10GigE connections), DMA FIFO (over DRAM) now part of builds, added Aurora support - WBX: Fixed bug that prevented LO locking with 50 MHz ref clock - pkg-config: Added boost_system - Utils: uhd_usrp_probe can query sensors, query_gpsdo_sensors: minor fixes, and cleanup - Examples: Bugfixes in tx_waveforms, benchmark_rate measures timeouts, - USB subsystem: Cleanups and minor bugfixes - Added devtest infrastructure - Converters: Added s8 and s16 data types - Added more aggressive optimization strategies for FPGA builds - Xilinx IP tool upgrade scripts cleaned up -- Ettus Research Thu, 11 Aug 2016 04:48:49 -0800 uhd (3.9.5-2) unstable; urgency=medium * update to release_003_009_005-30-gdde6c90 * revert upstream d53fd56 commit (Closes: #837504) -- A. Maitland Bottoms Sat, 08 Oct 2016 16:45:28 -0400 uhd (3.9.5-1) unstable; urgency=medium * New upstream release -- A. Maitland Bottoms Mon, 29 Aug 2016 17:20:19 -0400 uhd (3.9.4-5) unstable; urgency=medium * avoid neon asm code on armhf -- A. Maitland Bottoms Fri, 26 Aug 2016 23:29:17 -0400 uhd (3.9.4-4) unstable; urgency=medium * update to UHD-3.9.LTS) 003_009_005_rc1 The value of constant UHD_VERSION has been changed from 30904 to 30905. -- A. Maitland Bottoms Wed, 24 Aug 2016 23:26:43 -0400 uhd (3.9.4-3) unstable; urgency=medium * update to release_003_009_004-29-ge1139b2 -- A. Maitland Bottoms Sun, 03 Jul 2016 20:16:24 -0400 uhd (3.9.4-2) unstable; urgency=medium * revert Build-Depends-Indep change -- A. Maitland Bottoms Thu, 05 May 2016 23:34:12 -0400 uhd (3.9.4-1) unstable; urgency=medium * New upstream release GPIO control: Fix address mismatch for RX and full duplex. This fixes full-duplex mode for most devices. B200: Fixed auto rate selection (can now select 61.44 Msps) UBX: Fix member declaration order which could cause segfaults for debug builds Manual/Docs: Numerous fixes, use dot for graphs in manual Utils: multiple fixes for query_gpsdo_sensors, fixed floating point comparison Windows: Include registry file in installation Converters: Improve NEON converters -- A. Maitland Bottoms Thu, 05 May 2016 19:46:38 -0400 uhd (3.9.3-2) unstable; urgency=medium * update to release_003_009_003-12-g62f80e2 Added missing stdint.h include Unroll the loops in the NEON float to-from integer c cmake Added installation of .reg file utils Updated query_gpsdo_sensors query_gpsdo_sensors fixed sleep time ubx Changed member declaration to satisfy debug build Removed mention of OSX PPC support Updated URL for USRP image files Fixed spelling errors mostly in documentation gpio core Fixed a mismatch in the address assignment cmake Enable use of dot for Doxygen * Enable use of dot for Doxygen in Debian .doc package build -- A. Maitland Bottoms Mon, 11 Apr 2016 15:12:01 -0400 uhd (3.9.3-1) unstable; urgency=medium * New upstream release * Add C API to debian/patches/uhd-platform-hurd-kfreebsd -- A. Maitland Bottoms Tue, 29 Mar 2016 21:11:24 -0400 uhd (3.9.3-0ubuntu1) trusty; urgency=low * UBX: Fixed a phase synchronization issue on the sub-1GHz band * USB: Fixed transport issue that crashed when multiple USB devices were connected on a Windows machine, more graceful handling of USB disconnects,, provided .cdf file for installing on Windows * B200: Fixed memory growth/increasing tune times issue * E300: Fixed memory leak with udev, fixed issue with autoboot value, fixes to button behaviour * usrp2, usrp3: Fixed IQ imbalance and DC bias in DDC chain * CMake: Windows registry fixes * Fixed several compiler warnings and minor bugs * Examples: Updated benchmark_rate for improved thread safety -- Ettus Research Mon, 21 Mar 2016 11:40:26 -0800 uhd (3.9.2-3) unstable; urgency=medium * update to release_003_009_002-27-gccc8acb x300: Added power cycle message to uhd_image_loader Added includes to support more platforms -- A. Maitland Bottoms Fri, 11 Mar 2016 15:42:34 -0500 uhd (3.9.2-2) unstable; urgency=medium * update to release_003_009_002-21-gf212665 B200: Fix for increasing retune times Corrected the UHD behavior in the event of a USB disconnect UBX: Phase synchronization * build with ENABLE_GPSD OFF (Closes: #811916) -- A. Maitland Bottoms Wed, 09 Mar 2016 11:33:47 -0500 uhd (3.9.2-1) unstable; urgency=medium * more robust postinst (Closes: #808863) * New upstream release * E310: Added support for Speedgrade 3 * B205mini: Added support * E310: Fixed reference counting bug * B210: Fixed external clock reference bug for devices using ADF4002 PLLs * B210: Fixed codec loopback test * B2XX, E3XX, X3XX: Easier time-syncing features. Fixes bug where B210s would only run after issuing set_time_unknown_pps(). * X3XX: Fixed bug for IQ imbalance correction * E310: DRAM testbenching * Docs/Manual: Many updates and fixes -- A. Maitland Bottoms Wed, 30 Dec 2015 21:18:59 -0500 uhd (3.9.2~rc1-1) unstable; urgency=medium * New upstream release candidate * uhd_images_downloader now depends upon python-requests * B205mini: Added support -- A. Maitland Bottoms Sun, 27 Dec 2015 10:09:56 -0500 uhd (3.9.1-5) unstable; urgency=medium * update to release_003_009_001-17-g36c8e0f examples-Fixed-error-code-variable-in-rx_samples_c -- A. Maitland Bottoms Wed, 18 Nov 2015 21:46:15 -0500 uhd (3.9.1-4) unstable; urgency=medium * update to release_003_009_001-14-geebbc01 * updated patch display-correct-downloader-path (Closes: #772412) -- A. Maitland Bottoms Mon, 02 Nov 2015 12:10:40 -0500 uhd (3.9.1-3) unstable; urgency=medium * use dh_makeshlibs -V 'libuhd003 (>= 3.9)' -- A. Maitland Bottoms Wed, 30 Sep 2015 22:25:33 -0400 uhd (3.9.1-2) unstable; urgency=medium * update to release_003_009_001-3-gfee054d * use Breaks instead of Conflicts with older gnuradio, gr-osmosdr -- A. Maitland Bottoms Tue, 29 Sep 2015 21:49:36 -0400 uhd (3.9.1-1) unstable; urgency=low * New upstream release, updated udev rules -- A. Maitland Bottoms Sun, 13 Sep 2015 10:23:00 -0400 uhd (3.9.0-3) unstable; urgency=medium * drop dh_acc to get reproducible builds -- A. Maitland Bottoms Fri, 11 Sep 2015 22:37:50 -0400 uhd (3.9.0-2) unstable; urgency=low * fix FTBFS: use dh_acc and abi-compliance-checker just on amd64 revise uhd-platform-hurd-kfreebsd patch -- A. Maitland Bottoms Mon, 07 Sep 2015 19:35:50 -0400 uhd (3.9.0-1) unstable; urgency=medium * New upstream release, update to release_003_009_000-13-g01ed9b3 * build with libgps, gpsd support * use aarch64.patch from https://bugzilla.redhat.com/show_bug.cgi?id=1200836 (Sorry Adam, thanks Marcin!) -- A. Maitland Bottoms Tue, 01 Sep 2015 22:08:38 -0400 uhd (3.8.5-3) unstable; urgency=low * acknowledge NMU changes * update to release_003_008_005-11-g7a86523 -- A. Maitland Bottoms Thu, 27 Aug 2015 20:25:15 -0400 uhd (3.8.5-2.1) unstable; urgency=medium * Non-maintainer upload. * Rename library packages for g++5 ABI transition (closes: 794878). -- Julien Cristau Sun, 16 Aug 2015 17:55:53 +0200 uhd (3.8.5-2) unstable; urgency=medium * update to release_003_008_005-10-g3dbced2 * Added NI B2x0 VID/PID pairs to udev rules in Debian uhd-host package. * 0099-revert-neon-changes.patch: Revert the NEON changes from upstream commit 1b149f561370687ad65e3aa644a402f00dbd16ea to fix build on arm64. (Thanks Adam!) (Closes: #794906) -- A. Maitland Bottoms Fri, 07 Aug 2015 23:49:20 -0400 uhd (3.8.5-1) unstable; urgency=medium * New upstream release with maint branch patches: docs-Updated-X3x0-unbricking-procedure-info docs-Added-paragraph-on-GPIO-maximum-current-3.3V-su e3xx-Fix-firmware-to-actually-write-fuse-values e3xx-doc-Explain-autoboot-configuration e3xx-Make-frame-sizes-configurable e3xx-docs-Add-a-paragraph-on-network-configuration docs-Added-X3x0-LEDs-table Added-NI-B2x0-VID-PID-pairs-to-udev-rules * New upstream path code (closes: #772412) * Debian patches: for Debian Hurd and kFreeBSD support for reproducible builds: Doxygen HTML_TIMESTAMP = NO * Debian source package uses multiple tarballs to match upstream use of git with a submodule. * remove unused build-dependency on liboil0.3-dev (Closes: #793627) -- A. Maitland Bottoms Wed, 05 Aug 2015 00:41:49 -0400 uhd (3.7.3-1) unstable; urgency=low * New upstream release -- A. Maitland Bottoms Mon, 06 Oct 2014 09:21:14 -0500 uhd (3.7.2-1) unstable; urgency=low * New upstream release -- A. Maitland Bottoms Wed, 20 Aug 2014 17:33:06 -0500 uhd (3.7.1-2) unstable; urgency=low * Apply maint branch fixes through release_003_007_001-49-gdf4cf6d * Fix B2xx udev rules -- A. Maitland Bottoms Tue, 01 Jul 2014 22:34:32 -0400 uhd (3.7.1-1~bpo70+1) wheezy-backports; urgency=low * Rebuild for wheezy-backports. * Breaks gnuradio 3.6.3.2-1 in wheezy, needed by gnuradio 3.7.3 backport. * New upstream release * Include USRP NetworkManager configuration * Include additional bugfix patches from git maint branch * Introduced USRP X300 and X310 support! * Releasing a CHDR Dissector for Wireshark analysis * Improved USRP B200 and B210 stability * Introducing Integer-N tuning for WBX, SBX, CBX daughterboards * Introducing support for 120 MHz versions of WBX, SBX, CBX * Lots of new documentation * New GPIO example for USRP X300 * Fixed threading bug in USRP B2xx code causing GQRX issue * General UHD bug fixes & improvements * b200: Fixed bug in rx_dsp_core_3000 that would assume 3 halfbands and X300 settings interface. * Include patch from Avery Pennarun (Closes: #739852) * Conflicts with earlier versions on gnuradio (Closes: #733690) * Completely re-written UHD Images Downloader, with bug fixes, new features. -- A. Maitland Bottoms Sat, 24 May 2014 20:33:59 -0400 uhd (3.7.1-1) unstable; urgency=low * New upstream release * Include USRP NetworkManager configuration -- A. Maitland Bottoms Tue, 22 Apr 2014 21:16:32 -0400 uhd (3.7.0-3) unstable; urgency=low * update to release_003_007_000-72-gb6f1253 * reduce boost dependency to components listed in host/CMakelists.txt -- A. Maitland Bottoms Tue, 08 Apr 2014 22:02:04 -0400 uhd (3.7.0-2) unstable; urgency=low * Include additional bugfix patches from git maint branch -- A. Maitland Bottoms Sat, 29 Mar 2014 20:01:30 -0400 uhd (3.7.0-1) unstable; urgency=low * New upstream release * Introduced USRP X300 and X310 support! * Releasing a CHDR Dissector for Wireshark analysis * Improved USRP B200 and B210 stability * Introducing Integer-N tuning for WBX, SBX, CBX daughterboards * Introducing support for 120 MHz versions of WBX, SBX, CBX * Lots of new documentation * New GPIO example for USRP X300 * Fixed threading bug in USRP B2xx code causing GQRX issue * General UHD bug fixes & improvements * b200: Fixed bug in rx_dsp_core_3000 that would assume 3 halfbands and X300 settings interface. * Include patch from Avery Pennarun (Closes: #739852) * Conflicts with earlier versions on gnuradio (Closes: #733690) -- A. Maitland Bottoms Sun, 23 Feb 2014 17:48:29 -0500 uhd (3.6.2-1) unstable; urgency=low * New upstream release * Completely re-written UHD Images Downloader, with bug fixes, new features. -- A. Maitland Bottoms Tue, 21 Jan 2014 09:43:19 -0500 uhd (3.6.2~rc2-1) experimental; urgency=low * New upstream release candidate -- A. Maitland Bottoms Sat, 14 Dec 2013 09:56:03 -0500 uhd (3.6.2~rc1-1) experimental; urgency=low * New upstream release candidate -- A. Maitland Bottoms Thu, 05 Dec 2013 16:18:28 -0500 uhd (3.5.5-1) unstable; urgency=low * New upstream release Nicholas Corgan: uhd_images_downloader: fixes/improvements, redundancy fixes, better error handling, more descriptive error when MD5 check fails lib: dbsrx2 bugfix -- A. Maitland Bottoms Wed, 20 Nov 2013 21:48:35 -0500 uhd (3.5.4-4) unstable; urgency=low * update to git 6bb62ea (head of maint branch) to fix BUG #203 Michael Dickens (1): utils: fix declaration of "env_path_sep" such that it is always initialized before it is used in the "get_env_paths" function, by moving it from the global scope to inside that function. This change allows UHD_STATIC_BLOCK(load_modules) to work correctly. Michael West (1): BUG #203: Initialized gain values to 0.0 Nicholas Corgan (3): cmake: fixed UHD_IMAGES_DIR behavior to include directories inside specified images directory Updated images downloader URL docs: added info on libusbx for Windows -- A. Maitland Bottoms Wed, 13 Nov 2013 19:20:05 -0500 uhd (3.5.4-3) unstable; urgency=low * Fix syntax to avoid failing test on powerpc -- A. Maitland Bottoms Tue, 29 Oct 2013 09:30:06 -0400 uhd (3.5.4-2) unstable; urgency=low * Avoid failing test on powerpc * Add pkg-config dependency to help find liborc -- A. Maitland Bottoms Mon, 28 Oct 2013 21:07:40 -0400 uhd (3.5.4-1) unstable; urgency=low * New upstream release -- A. Maitland Bottoms Fri, 27 Sep 2013 23:43:51 -0400 uhd (3.5.3-1) unstable; urgency=low * New upstream release UHD source includes man pages now Moved usrp_n2xx_simple_net_burner and usrp2_card_burner into bin * Add watchfile (Closes: #702937) * Add USRP B100 2500:0002 to udev rules (Closes: #705509) * No more uhd_install_firmware, use uhd_images_downloader (Closes: #654637) -- A. Maitland Bottoms Sat, 26 May 2013 22:41:47 -0400 uhd (3.5.2-1) experimental; urgency=low * New upstream release B100: Fix get send buffer timeout E1x0: Changes to bus timings for S issue USRP1: Restore broken EEPROM writing * Plus fixes E110: Fix FPGA Makefile build typo UHD: Fixed timespec irrational rate rounding Multichan streamer CPU utilization -- A. Maitland Bottoms Mon, 22 Apr 2013 22:30:53 -0400 uhd (3.5.1-1) experimental; urgency=low * New upstream release Misc: Fixes to images downloader Fixes to C++ net burner Added sleep(1) to query_gpsdo_sensors OSX: Fix for socket send code newer OS versions * Upload to experimental during wheezy freeze -- A. Maitland Bottoms Sun, 27 Jan 2013 23:33:25 -0500 uhd (3.5.0-1) experimental; urgency=low * New upstream release B100: Added timed commands feature Incremented FPGA compat number to 11.1 Incremented firmware compat number to 3 E1x0: Added timed commands feature Incremented FPGA compat number to 11.1 USRP2/N2x0: Alternative stream destination on TX Incremented FPGA compat number to 10 N2x0: Implemented timed-commands feature Implemented fast-commands feature SBX/WBX Tune with phase sync using timed-commands RFX series Added calibration utilities support General: SSE2 conversions for sc8 RX samples Added multi-threading to packet converters Added automatic images fetcher application -- A. Maitland Bottoms Wed, 09 Jan 2013 14:24:11 -0500 uhd (3.4.4-1) experimental; urgency=low * New upstream release * Gen2 Fix RX and TX DSP scalar adjustments * B100/E1x0 Fixed RX ADC IQ inversion swap Incremented FPGA compat number to 9.4 -- A. Maitland Bottoms Thu, 18 Oct 2012 13:21:54 -0400 uhd (3.4.3-1) experimental; urgency=low * New upstream release XCVR2450: Fix to disable automatic LO offset on TX N2x0: Deal with misc exceptions in net burner E1x0: Changes to add reliability to bus state machine USRP1: Shutoff the DAC on transmit EOB flags Revert 1st nyquist zone DAC calculation -- A. Maitland Bottoms Wed, 05 Sep 2012 21:55:04 -0400 uhd (3.4.2-1) unstable; urgency=low * New upstream release * USRP2/N2x0: o Card and net burner language fixes o Net burner python v3 code fix o Net burner IPv6 interface fix * E1x0: o Fix for FPGA timing issue with GPMC input o Incremented FPGA compat number to 9.2 * B100: o Fix USB wrapper/buffer release race condition * USRP1: o Fix DAC calculation for tune out of 1st nyquist zone * General: o Fix for recv packet handler time error check o SIMD conversion routines priority over table look-up o Fix undefined GCC float conversion behaviour for sc8 -- A. Maitland Bottoms Wed, 23 May 2012 20:50:59 -0400 uhd (3.4.1-1) unstable; urgency=low * New upstream release * USRP2/N2x0: o Filter out invalid broadcast replies o Incremented FPGA compat number to 9.1 * E1x0: o Incremented FPGA compat number to 9.1 * B100: o FPGA fixes for USB slave FIFO interface o Incremented FPGA compat number to 9.3 * USRP1: o Stop thread in deconstructor for race condition o Fixed DBSRX + USRP1 i2c lockup condition * Gen2: o Fix for unintentional clear in deprecated recv() call o Fix RX DC offset call to handle negative values * FreeBSD: o Fixed network relay example compilation -- A. Maitland Bottoms Sat, 21 Apr 2012 21:40:35 -0400 uhd (3.4.0-3) unstable; urgency=low * include upstream fix bsd compilation for network relay example (Closes: #667079) * use liborc again, revert 3.4.0-2 changes. -- A. Maitland Bottoms Wed, 04 Apr 2012 22:43:26 -0400 uhd (3.4.0-2) unstable; urgency=low * Build without liborc to hunt bugs in convert_test -- A. Maitland Bottoms Tue, 03 Apr 2012 11:43:02 -0400 uhd (3.4.0-1) unstable; urgency=low * New upstream release * USRP2/N2x0: o 50 Msps RX/TX with sc8 mode over the wire * B100: o 16 Msps RX/TX with sc8 mode over the wire * SBX/WBX: o Added self-calibration utilities * Gen2: o Control RX/TX DC offset correction via API o Control RX/TX IQ balance correction via API o Incremented FPGA compat number to 9 * USRP1: o Support 16Msps RX with sc8 mode over the wire o Control RX DC offset correction via API * Misc: o Multiple streamers/heterogeneous rates o Alternative host and wire data types o Added API calls for DC offset correction o Added API calls for IQ balance correction * Improved description (Closes: #658355) -- A. Maitland Bottoms Sat, 23 Mar 2012 08:34:48 -0400 uhd (3.3.2-3) unstable; urgency=low * more robust postinst (Closes: #656119) -- A. Maitland Bottoms Tue, 17 Jan 2012 11:05:15 -0500 uhd (3.3.2-2) unstable; urgency=low * improved uhd-host package - include manual documentation - configure sysctl and pam limits settings * Add README.Debian * upload to unstable -- A. Maitland Bottoms Wed, 11 Jan 2012 13:37:13 -0500 uhd (3.3.2-1) experimental; urgency=low * New upstream release * Packaged for Debian (Closes: #644789) -- A. Maitland Bottoms Tue, 10 Jan 2012 00:18:49 -0500 uhd (3.3.1-1) experimental; urgency=low * Keep up, rebase package with release_003_003_001 tag -- A. Maitland Bottoms Sat, 12 Nov 2011 20:00:49 -0500 uhd (3.2.4-1) unstable; urgency=low * New upstream release -- A. Maitland Bottoms Fri, 07 Oct 2011 21:45:37 -0400 uhd (3.2.3-1) experimental; urgency=low * Keep up, rebase package with release_003_002_003 tag -- A. Maitland Bottoms Tue, 20 Sep 2011 12:17:13 -0400 uhd (3.2.1-1) experimental; urgency=low * Package from upstream git -- A. Maitland Bottoms Fri, 5 Aug 2011 19:12:07 -0500